Replaceable Blade Type Chamfering Tools/Tips/Blades（work material：general steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Engraving Cutter

  Nine9

  The special insert design realizes an ultra-long operating life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.65～2.1 ～ 0.65～2.7	45 ～ 60	Centering (Positioning) / Engraved	general steel[◎]	Single blade	NA	Available	TiAlN / TiN	-

  From: ₹ 3,639.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Spot Drill

  Nine9

  Insert for NC spot drill holder.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2–10 ～ 3~14	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	general steel[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 3,043.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-away Tip for C-Cutter Mini

  BIG DAISHOWA SEIKI

  Throw-away insert for "C-Cutter Mini" high performance chamfering cutters that achieve ultra-high feed rates and a compact size.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer / Chamfering/Horizontal	general steel[○]	-	-	Available	Other	0.2

  From: ₹ 1,577.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Boy

  BIG DAISHOWA SEIKI

  [Features]
  ·Accurate positioning of drilled holes and chamfering are performed at once.
  ·High-precision indexable bit with excellent sharpness.
  ·The cutting edge can be replaced, eliminating the need for regrinding.
  ·It is a long shank type with little work interference.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[○]	-	NA	Available	TiN	-

  From: ₹ 10,361.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Menmen

  FUJIGEN

  [Features]
  · Small diameter type. Small diameter type supporting smaller diameter machining than conventional chamfer cutters.
  · Angle can be selected from 15° to 75° (5° increments) according to applications.
  · Tips are available in many materials to support diverse workpieces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	13.5 ～ 18.2	15 ～ 75	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 15,119.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Gentlemen

  FUJIGEN

  [Features]
  · The longest blade length. It is also possible to machine difficult-to-cut materials with a unique breaker with a tip blade length of 30 mm.
  · Available in 13 angles from 15° to 75°.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	50.7 ～ 73.3	15 ～ 75	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 54,347.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi Angle Mill

  FUJIGEN

  [Features]
  · Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.
  · 0° to 90° at 5° pitch for easy, reliable angle adjustment

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	0–90	Chamfering/Horizontal / V Groove	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 43,800.84
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-away Tip for C-Cutter Boy

  BIG DAISHOWA SEIKI

  [Features]
  · An economical type with long life that allows 3 corners of the carbide tip to be used

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	45	Chamfering/Horizontal	general steel[○]	-	-	Available	Other	0.4

  From: ₹ 1,680.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High speed coating for Center Boy throwaway bit【5 Pieces Per Package】

  BIG DAISHOWA SEIKI

  [Features]
  · Shows outstanding sharpness as it has a cutting edge with precision finishing.
  · Because it is a disposable item with replaceable edge, it does not require regrinding and always performs smoothly.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Centering (Positioning) / Hole Chamfer	general steel[○]	-	NA	Available	TiN	-

  From: ₹ 2,187.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Uratorimen-C

  FUJIGEN

  This tool is specialized for back chamfering in drilling and edge chamfering.
  The insert with chip breaker provides excellent sharpness.
  Since the insert is replaceable, there is no need to re-grind it.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6.2 ～ 14	45	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 17,509.87
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special

  FUJIGEN

  Replaceable insert for round chamfering of R0.5 to R5.
  Carbide insert that can be used on 4 sides with 1 insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	56	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: ₹ 37,654.35
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tips for Chibieco and Chibieco 2 TXMT080206

  FUJIGEN

  An indexable insert that can perform chamfering.
  [Applications]Used for centering (positioning) / chamfering / horizontal running.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	Available	AlCrN	-

  From: ₹ 1,781.36
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Gentlemen, Insert X63GUR

  FUJIGEN

  A dedicated carbide insert for Gentlemen that can perform chamfering.
  [Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal	general steel[○]	-	-	Available / NA	Non-Coated / AlCrN	-

  From: ₹ 4,268.62
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Chamfering Cutter Super Mentori-Maru MTMS 20/30

  THE CUT

  [Features]
  · Can be used like an end mill for machining materials from an un-machined state.
  · Capable of ramping machining (α = 3°).
  · Standard positive inserts of various manufacturers are mountable.
  · Capable of high speed machining because of the 3-flute/4-flute design.
  · Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
  · The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
  · The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
  · Change the insert material or machining conditions for use with different types of work material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	general steel[○]	-	-	-	-	-

  From: ₹ 26,600.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momimen Nano

  FUJIGEN

  [Features]
  · Smallest class in the industry. A screw-on type, the smallest class in the industry thanks to its industry-smallest class tip (underneck diameter of φ6 mm).
  · Interference of vise, clamp and the like can be avoided.
  · Capable of machining previously unreachable locations.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6 ～ 7.4	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,959.71
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini momi

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	9	90	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,928.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Momimen

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	13.5 ～ 16.15	90 ～ 118	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 11,779.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Decamomi

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22.5 ～ 26.6	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 18,123.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  60° Momimen

  FUJIGEN

  [Features]
  · A throw-away type requiring only a tip change (no tool correction required).
  · This tool allows C-chamfering and conical gouging, while reducing the number of tools used in ATC tool changes, and improving machining speed and productivity.
  · The shank diameter is φ16 and the cutting edge diameter is φ12, making it suitable for 60° chamfering in tight spaces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	11.88	60	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 15,135.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini eco

  FUJIGEN

  [Features]
  · Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
  · Improved tip shape and cutting edge specification improve machinability and chip discharge.
  · Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	10.3 ～ 12.3	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,274.75
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momi Eco

  FUJIGEN

  [Features]
  · Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
  · Improved tip shape and cutting edge specification improve machinability and chip discharge.
  · Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	14.2 ～ 17.1	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 11,779.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ecomen

  FUJIGEN

  [Features]
  · Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
  · Improved tip shape and cutting edge specification improve machinability and chip discharge.
  · Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22 ～ 26.6	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 15,119.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini eco 2

  FUJIGEN

  [Features]
  · Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
  · Improved tip shape and cutting edge specification improve machinability and chip discharge.
  · Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16.5 ～ 18.6	30 ～ 60	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 17,622.38
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momi Eco 2

  FUJIGEN

  [Features]
  · Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
  · Improved tip shape and cutting edge specification improve machinability and chip discharge.
  · Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22.3 ～ 25.3	30 ～ 60	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 23,464.82
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ecomen 2

  FUJIGEN

  [Features]
  · Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
  · Improved tip shape and cutting edge specification improve machinability and chip discharge.
  · Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	34.1 ～ 36.9	30 ～ 60	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 29,308.58
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter

  FUJIGEN

  [Features]
  · Wide variety. Angle can be selected from 15° to 75° (5° increments) according to applications.
  · Tips are available in many types to support diverse workpieces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	29.9 ～ 37.9	15 ～ 70	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 29,308.58
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Young Men

  FUJIGEN

  [Features]
  · C15 chamfering. An excellent finish without chattering after one round of chamfering.
  · Chamfering performance next only to that of "Gentlemen" at a price equivalent to "Chamfering Cutter".

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	58.2 ～ 62.2	30 ～ 60	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 30,294.38
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kame Cutter

  FUJIGEN

  [Features]
  · Reduction of work time. : The special tip shape enables high-feed processing

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	34.9	45	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 32,362.40
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ryanmencut / V

  FUJIGEN

  [Features]
  · Simultaneous chamfering. : Can be used for front and back chamfering, as well as side V-grooving

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	19.5 ～ 45.6	45	Chamfering/Horizontal / V Groove	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 18,533.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender

  FUJIGEN

  [Features]
  · Turning tool type. Telescopic turning tool enables a wide range of chamfering.
  · Hole chamfering capacity: φ28 mm - φ134 mm.
  · Uses the T32 type tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	49.85～134.6	45	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 24,375.60
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender dedicated arm

  FUJIGEN

  It is a dedicated accessory for the Baitender.
  A wide area of chamfering is possible with the telescopic tool bit.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	45	Chamfering/Horizontal	general steel[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,200.27
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Cutting Bit

  FUJIGEN

  [Features]
  · Easy rounding change: Various round chamfering is possible by exchanging the tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	0.5 to 4

  From: ₹ 30,463.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R0.5 to R5 and also for small diameter round chamfering.
  Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single process.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: ₹ 13,450.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R5 to R10.
  Fujigen's original negative/positive method is used, so it is possible to cut R10 in a single process even with compact machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	35.4	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	5–10

  From: ₹ 15,119.05
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau

  FUJIGEN

  Various round chamfering is possible by exchanging the tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	69.2	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	5–10

  From: ₹ 40,157.67
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RC Hand Cutter

  FUJIGEN

  Round chamfering and C chamfering of R1, R2, and R3 are possible by exchanging the insert.
  The unique insert replacement method makes insert replacement fast and accurate.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	1–3

  From: ₹ 13,450.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ryanmencut R

  FUJIGEN

  [Features]
  · Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.
  · Mini R is for front only.
  · Uses a tip that allows 8 corners to be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	30 ～ 48	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	0.5~5 ～ 1–5

  From: ₹ 25,893.13
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini R

  FUJIGEN

  8 corners of an insert can be used.
  Round chamfering and C chamfering are possible by exchanging the insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	-	Round Chamfer	general steel[○]	Single blade	NA	NA	Non-Coated	1–5

  From: ₹ 13,450.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Momieco / Momieco 2 TXMT110306

  FUJIGEN

  An indexable insert that can perform chamfering.
  Compatible models: Momieco/Momieco 2/Urazaguru
  [Applications]Used for centering (positioning) / chamfering / horizontal running.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	Available	AlCrN	-

  From: ₹ 1,916.64
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Momimen nano ENGX040102

  FUJIGEN

  Insert for Momimen nano.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	Available	AlCrN	-

  From: ₹ 2,098.80
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tips for Chibimomi C22GUX

  FUJIGEN

  An indexable insert for Chibimomi that can be used for center spotting and chamfering.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	NA	Non-Coated	-

  From: ₹ 1,560.36
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Tip for Momimen / All C32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	Available / NA	TiN / Non-Coated / AlCrN	-

  From: ₹ 1,765.29
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tips for Decamomi T32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	NA	Non-Coated	-

  From: ₹ 1,950.13
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for 60° Momimen D43GUX

  FUJIGEN

  An indexable insert for 60° Momimen that can be used for center spotting and chamfering.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	Available	TiN	-

  From: ₹ 3,001.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Ecomen / Ecomen 2 TXMT16T306

  FUJIGEN

  An indexable insert that can perform chamfering.
  Compatible models: Ecomen / Ecomen 2 / Choumen / Choumen B
  [Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○]	-	-	Available	AlCrN	-

  From: ₹ 2,085.40
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
From
Days to Ship
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	Nine9	Nine9	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	FUJIGEN	FUJIGEN	FUJIGEN	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	THE CUT	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN
Product Series	Insert for Engraving Cutter	Insert for Spot Drill	Throw-away Tip for C-Cutter Mini	Center Boy	Menmen	Gentlemen	Multi Angle Mill	Throw-away Tip for C-Cutter Boy	High speed coating for Center Boy throwaway bit【5 Pieces Per Package】	Uratorimen-C	R Special	Tips for Chibieco and Chibieco 2 TXMT080206	For Gentlemen, Insert X63GUR	Chamfering Cutter Super Mentori-Maru MTMS 20/30	Momimen Nano	Mini momi	Momimen	Decamomi	60° Momimen	Mini eco	Momi Eco	Ecomen	Mini eco 2	Momi Eco 2	Ecomen 2	Chamfering cutter	Young Men	Kame Cutter	Ryanmencut / V	Baitender	Baitender dedicated arm	R Cutting Bit	R Special Jr.	R-Nouveau Jr.	R-Nouveau	RC Hand Cutter	Ryanmencut R	Mini R	Tip for Momieco / Momieco 2 TXMT110306	Tip for Momimen nano ENGX040102	Tips for Chibimomi C22GUX	Tip for Momimen / All C32GUX	Tips for Decamomi T32GUX	Tip for 60° Momimen D43GUX	Tip for Ecomen / Ecomen 2 TXMT16T306
From	₹ 3,639.69	₹ 3,043.65	₹ 1,577.00	₹ 10,361.02	₹ 15,119.05	₹ 54,347.22	₹ 43,800.84	₹ 1,680.40	₹ 10,935.62	₹ 17,509.87	₹ 37,654.35	₹ 1,781.36	₹ 4,268.62	₹ 26,600.76	₹ 9,959.71	₹ 9,928.89	₹ 11,779.95	₹ 18,123.31	₹ 15,135.13	₹ 8,274.75	₹ 11,779.95	₹ 15,119.05	₹ 17,622.38	₹ 23,464.82	₹ 29,308.58	₹ 29,308.58	₹ 30,294.38	₹ 32,362.40	₹ 18,533.16	₹ 24,375.60	₹ 9,200.27	₹ 30,463.15	₹ 13,450.16	₹ 15,119.05	₹ 40,157.67	₹ 13,450.16	₹ 25,893.13	₹ 13,450.16	₹ 1,916.64	₹ 2,098.80	₹ 1,560.36	₹ 1,765.29	₹ 1,950.13	₹ 3,001.55	₹ 2,085.40
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more
Tool Material Type	Carbide	Carbide	-	High-speed steel	-	-	-	Carbide	High-speed steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Diameter (D)(mm)	0.65～2.1 ～ 0.65～2.7	2–10 ～ 3~14	-	-	13.5 ～ 18.2	50.7 ～ 73.3	-	-	-	6.2 ～ 14	56	-	-	-	6 ～ 7.4	9	13.5 ～ 16.15	22.5 ～ 26.6	11.88	10.3 ～ 12.3	14.2 ～ 17.1	22 ～ 26.6	16.5 ～ 18.6	22.3 ～ 25.3	34.1 ～ 36.9	29.9 ～ 37.9	58.2 ～ 62.2	34.9	19.5 ～ 45.6	49.85～134.6	16	-	25	35.4	69.2	25	30 ～ 48	16	-	-	-	-	-	-	-
Tip angle (θ)	45 ～ 60	90	-	90 ～ 120	15 ～ 75	15 ～ 75	0–90	45	90	45	-	-	-	-	90 ～ 120	90	90 ～ 118	90 ～ 120	60	90 ～ 120	90 ～ 120	90 ～ 120	30 ～ 60	30 ～ 60	30 ～ 60	15 ～ 70	30 ～ 60	45	45	45	45	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Application	Centering (Positioning) / Engraved	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal
work material	general steel[◎]	general steel[◎]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]
Single blade, two blades	Single blade	Single blade	-	-	Single blade	Single blade	Single blade	-	-	Single blade	Single blade	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-	-	-	-
Peripheral Blade Y/N	NA	NA	-	NA	NA	NA	NA	-	NA	NA	NA	-	-	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	-	-	-	-	-	-
Coating Y/N	Available	Available	Available	Available	NA	NA	NA	Available	Available	NA	NA	Available	Available / NA	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	NA	Available / NA	NA	Available	Available
Coating Type	TiAlN / TiN	TiN	Other	TiN	Non-Coated	Non-Coated	Non-Coated	Other	TiN	Non-Coated	Non-Coated	AlCrN	Non-Coated / AlCrN	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	AlCrN	AlCrN	Non-Coated	TiN / Non-Coated / AlCrN	Non-Coated	TiN	AlCrN
R Size (R)(mm)	-	-	0.2	-	-	-	-	0.4	-	-	0.5~5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 to 4	0.5~5	5–10	5–10	1–3	0.5~5 ～ 1–5	1–5	-	-	-	-	-	-	-

Loading...