Chamfer, V-Grooves（work material：Aluminum）

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[◎]	Single blade	NA	NA	-	-

  From: ₹ 3,909.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	Aluminum[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SV Spiral Chamfer Cutter

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Aluminum[○]	Single blade	NA	NA	-	-

  From: ₹ 6,426.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

  THE CUT

  [Features]
  · No need to turn over the work material. (Also removes through-hole burrs)
  · Both sides can be chamfered with the one cutter tool.
  · Ultra-fine particle carbide with TiAlN coating for a longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2.8 ～ 12	90°	Hole Chamfer / Drilling / Other	Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 14,520.76
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering. Can also be used as a deburring tool
  ·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
  ·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	Available	Available	TS	-

  From: ₹ 3,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[◎]	-	-	Available	TiAlN	-

  From: ₹ 4,202.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chatterless chamfer milling machine

  FUKUDA

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
  
  [Features]
  · Chamfering.
  · Drilling machines, milling machines, machining centers.
  · Horizontal Milling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	60 ～ 120	Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 2,351.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Mentatsu aluminum AL-VME

  DIJET

  A tool with excellent abrasion resistance.
  Work material, Aluminum
  Single-edge blade
  Tool grade, Carbide
  Tip angle (θ) 90

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Chamfering/Horizontal	Aluminum[◎]	Single blade	-	NA	Non-Coated	-

  From: ₹ 5,126.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Starting Drill GSS

  EIKOSHA

  Drill for positioning and chamfering.
  [Features]
  · TiN coating achieves longer life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90 ～ 135	Centering (Positioning) / Hole Chamfer / Drilling	Aluminum[○]	-	-	Available	TiN	-

  From: ₹ 1,596.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]
  · 90° Carbide 2-Flute Chamfering V-Grooving End Mill
  · Use for V-grooving, horizontal chamfering, centering, hole chamfering.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Suitable for a wide range of work materials from general steel to aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	-	-	Available	Other	-

  From: ₹ 3,151.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade for Chamfer/Deburring【6-10 Pieces Per Package】

  NOGA JAPAN

  [Features]
  A blade for chamfering and deburring.
  Compatible main body: Compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	-	Other	Aluminum[○]	-	-	-	-	-

  From: ₹ 671.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Double Sided Chamfering Cutter 45° DFC

  THE CUT

  [Features]
  · Capable of V-grooving both front and back surfaces as well as the side surfaces.
  · Capable of chamfering up to C2.8 for front chamfering.
  · The use of a dedicated insert (4 cutting edges) delivers high precision machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	11 ～ 20	-	Hole Chamfer / V Groove	Aluminum[○]	-	-	-	-	-

  From: ₹ 19,647.96
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  ·Easy high-quality processing of corner radius
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Aluminum[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: ₹ 2,845.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,456.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Mini WR Chamfer Cutter

  EIKOSHA

  Carbide mini WR chamfering cutter capable of R chamfering on the top and bottom surfaces.
  [Features]
  ·Abrasion resistance is achieved by adopting TIAlN coating.
  ·Back and surface R chamfering.
  [Applications]
  ·R chamfering on the front and R chamfering on the back can be processed with this single tool.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3.8 ～ 13.4	-	Round Chamfer	Aluminum[○]	-	-	-	-	-

  From: ₹ 17,350.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Center reamer

  FUKUDA

  A cutting tool used for finishing the center hole and chamfering.
  [Features]
  ·Because it is designed with an odd number of flutes, machining with little chatter is possible.
  ·A rich lineup of 60°, 90° and 120°.
  [Applications]
  ·Ideal for finishing center holes, as well as chamfering corners.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	60 ～ 120	Hole Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 1,984.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Angular Cutter With TAG Handle G2

  ASAHI TOOLS

  Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table groove

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	15 ～ 100	45° ～ 60°	Chamfering/Horizontal	Aluminum[○]	Single blade	Available	NA	Non-Coated	-

  From: ₹ 15,436.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 4	90°	Chamfering/Horizontal	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 3,217.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Inversed Chamfering Cutter KUMW-4

  KYOWA SEIKO

  4 straight flutes.
  90° (included angle type)
  Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin
  Single-edge blade
  Tool grade, Carbide

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Chamfering/Horizontal	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 8,213.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  ·Ideal for chamfering and V-groove
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,132.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,684.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  ·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	Available	TS	-

  From: ₹ 5,127.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
  ·Peripheral flutes enable inclined, contour and helical cutting
  ·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
  ·With helix angle on the peripheral flutes
  ·Can also be used as a deburring tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,434.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  • Non-Coated
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	-	0.15 ～ 5

  From: ₹ 3,471.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  MISUMI

  The sharp helix blade achieves the clean machined surface with less burr

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[◎]	Single blade	NA	NA	-	-

  From: ₹ 4,113.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	Available	Available	-	-

  From: ₹ 3,281.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill VP-LDS

  OSG

  V coating enables longer service life compared to TIN-NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Aluminum[◎]	Single blade	NA	Available	TiCN	-

  From: ₹ 1,839.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill Standard NC-LDS

  OSG

  Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	90 ～ 130	Centering (Positioning) / Hole Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 970.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	Aluminum[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 41,717.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coating FX-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	Aluminum[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 35,371.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Corner Rounding Type FX-ECR

  OSG

  Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 1.5	-	Round Chamfer	Aluminum[○]	Single blade	NA	Available	TiAlN	0.1 ～ 2

  From: ₹ 6,517.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter FX-SCC

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 9,366.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,281.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 10,124.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC

  OSG

  Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 10,025.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (negative type) HSCT-N

  OSG

  End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,178.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,228.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

  OSG

  Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,754.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,754.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	Available	TiCN	-

  From: ₹ 4,961.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

  OSG

  Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Aluminum[○]	Single blade	Available	Available	TiCN	-

  From: ₹ 2,499.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center reamer (taper shank)

  FUKUDA

  A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	60 ～ 90	Hole Chamfer	Aluminum[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 18,278.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Mini WR Chamfer Cutter, Long

  EIKOSHA

  Back and front are rounded. Long handle

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6.8 ～ 15.4	-	Round Chamfer	Aluminum[○]	-	-	-	-	-

  From: ₹ 22,706.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New Chamfering Cutter

  EIKOSHA

  Chamfering New chamfering milling cutter with 1 flute.
  [Features]
  ·Can be re-polished.
  ·A shape that does not chatter when chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6	60	Chamfering/Horizontal	Aluminum[○]	-	-	-	-	-

  From: ₹ 7,395.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCCC AS Coated Carbide Center for Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	-	Available	Available	TiAlN	-

  From: ₹ 8,059.49
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	OSG	UNION TOOL	THE CUT	MISUMI	DIXI	FUKUDA	DIJET	EIKOSHA	7 LEADERS	NOGA JAPAN	THE CUT	MISUMI	MISUMI	EIKOSHA	FUKUDA	ASAHI TOOLS	KYOWA SEIKO	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	FUKUDA	EIKOSHA	EIKOSHA	SANKO MFG
Product Series	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	Leading Drill TIN-NC-LDS	SV Spiral Chamfer Cutter	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	TS coated carbide chamfering end mill, 2-flute / short model	Carbide Solid Chamfering Endmill 3-Flute	Chatterless chamfer milling machine	For Mentatsu aluminum AL-VME	Starting Drill GSS	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	Blade for Chamfer/Deburring【6-10 Pieces Per Package】	Double Sided Chamfering Cutter 45° DFC	TS coated carbide inner R-cutter, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	Carbide Mini WR Chamfer Cutter	Center reamer	Angular Cutter With TAG Handle G2	Carbide Chamfering Cutter KMC-2	Carbide Inversed Chamfering Cutter KUMW-4	TS coated carbide chamfer, V grooving end mill, 2-flute	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 3-flute / short model	Carbide inner R-cutter, 2-flute	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	Leading Drill VP-LDS	Leading Drill Standard NC-LDS	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	Leading Drill, Carbide FX Coating FX-LDS	2-flute, Corner Rounding Type FX-ECR	2-flute Spiral Chamfering Cutter FX-SCC	2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC	2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC	2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC	3-flute Chamfering Cutter (negative type) HSCT-N	3-flute Chamfering Cutter (positive type) HSCT-P	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank	Center reamer (taper shank)	Carbide Mini WR Chamfer Cutter, Long	New Chamfering Cutter	SAGCCC AS Coated Carbide Center for Chamfering
CAD	2D / 3D				2D / 3D								2D / 3D	2D / 3D						2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	₹ 3,909.85	₹ 1,437.53	₹ 6,426.76	₹ 14,520.76	₹ 3,560.00	₹ 4,202.24	₹ 2,351.53	₹ 5,126.22	₹ 1,596.36	₹ 3,151.56	₹ 4,753.20	₹ 19,647.96	₹ 2,845.24	₹ 4,456.00	₹ 17,350.49	₹ 1,984.75	₹ 15,436.87	₹ 3,217.20	₹ 8,213.13	₹ 4,132.20	₹ 4,684.04	₹ 5,127.56	₹ 4,434.02	₹ 3,471.11	₹ 4,113.64	₹ 3,281.98	₹ 1,839.35	₹ 970.07	₹ 41,717.11	₹ 35,371.07	₹ 6,517.84	₹ 9,366.73	₹ 9,281.02	₹ 10,124.84	₹ 10,025.71	₹ 8,178.69	₹ 8,228.25	₹ 8,754.64	₹ 8,754.64	₹ 4,961.47	₹ 2,499.65	₹ 18,278.13	₹ 22,706.95	₹ 7,395.99	₹ 8,059.49
Days to Ship	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Specifications	Non-Coated Aluminum 2 Flutes				TS General Steel 2 Flutes S (Short)								TS General Steel 2 Flutes	TS SUS 2 Flutes						TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 3 Flutes S (Short)	Non-Coated General Steel 2 Flutes	Non-Coated Aluminum 2 Flutes	TiCN 2 Flutes S (Short)
Tool Material Type	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Cobalt HSS	Carbide	High-speed steel	-	Carbide	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	High-speed steel	Carbide	High-speed steel	Carbide
Tool Diameter (D)(mm)	3 ～ 12	3 ～ 25	0.8 ～ 1	2.8 ～ 12	3 ～ 12	2 ～ 12	-	3 ～ 10	3 ～ 25	0.5 ～ 20	-	11 ～ 20	-	3 ～ 12	3.8 ～ 13.4	-	15 ～ 100	0.3 ～ 4	-	3 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	-	3 ～ 12	10 ～ 25	3 ～ 25	3 ～ 25	16 ～ 25	16 ～ 25	0.5 ～ 1.5	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	1 ～ 2	1 ～ 2	1 ～ 2	1 ～ 2	-	3 ～ 25	-	6.8 ～ 15.4	6	3 ～ 20
Tip angle (θ)	90	60 ～ 120	90	90°	60 ～ 120	90	60 ～ 120	90	90 ～ 135	90	-	-	-	90	-	60 ～ 120	45° ～ 60°	90°	-	60 ～ 120	90	90	90	-	90	60 ～ 120	90	90 ～ 130	90	90	-	90	90	90	90	90	90	90	90	-	90	60 ～ 90	-	60	-
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Hole Chamfer / Drilling / Other	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer / Chamfering/Horizontal	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Other	Hole Chamfer / V Groove	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Hole Chamfer	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Round Chamfer	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove
work material	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	-	-	-	-	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-
Peripheral Blade Y/N	NA	NA	NA	-	Available	-	NA	-	-	-	-	-	NA	NA	-	NA	Available	-	-	NA	Available	NA	Available	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	-	-	Available
Coating Y/N	NA	Available	NA	Available	Available	Available	NA	NA	Available	Available	-	-	Available	Available	-	NA	NA	NA	NA	Available	Available	Available	Available	NA	NA	Available	Available	NA	Available	Available	Available	Available	NA	Available	NA	NA	NA	NA	NA	Available	Available	NA	-	-	Available
Coating Type	-	TiN	-	TiAlN	TS	TiAlN	Non-Coated	Non-Coated	TiN	Other	-	-	TS	TS	-	Non-Coated	Non-Coated	-	-	TS	TS	TS	TS	-	-	-	TiCN	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	-	-	TiAlN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	0.1 ～ 5	-	-	-	-	-	-	-	-	-	-	0.15 ～ 5	-	-	-	-	-	-	0.1 ～ 2	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...