Chamfer, V-Grooves

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Seat Mini Chamfer (90° Blade)

  NOGA JAPAN

  [Features]
  ·A solid carbide chamfering cutter that can chamfer the back of small holes (minimum cutting edge diameter 1.5 mm).
  ·Perfect for machining.
  ·Can be used for milling, deburring, and back chamfering.
  ·The spiral blade provides a smooth cutting edge.
  ·This is a mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.
  [Applications]
  ·Work Material: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
  ·A mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	1.5 ～ 6	90	-	-	-	-	-	TiAlN	-

  From: ₹ 5,924.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill VP-LDS

  OSG

  V coating enables longer service life compared to TIN-NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	NA	Available	TiCN	-

  From: ₹ 1,839.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Reach Back Spot Facing Mini Chamfer 90° Blade (for deep holes)

  NOGA JAPAN

  [Features]
  · A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).
  · Ideal for machining.
  · Spiral blade provides smooth sharpness.
  · A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.
  [Applications]
  · Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
  · A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3 ～ 12	90	-	-	-	-	-	TiAlN	-

  From: ₹ 6,024.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Rounding End Mill

  FUKUDA

  End mill for R chamfering.
  [Features]
  ·The use of a straight blade makes it easy to re-grind and has excellent cost performance.
  ·The shank diameter is designed to be thick, making it rigid.
  ·A rich lineup from R0.5 to 30.
  [Applications]
  ·Ideal for R chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	-	Round Chamfer	general steel[○] / Cast Iron[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5 ～ 30

  From: ₹ 5,768.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
  ·Peripheral flutes enable inclined, contour and helical cutting
  ·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
  ·With helix angle on the peripheral flutes
  ·Can also be used as a deburring tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,434.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Speed Chamfering Tool TOGLON® Multi Chamfer

  IWATA TOOL

  [Features]
  · Toglon-shaped 5-flute chamfering dedicated model
  · Ultra-high speed machining with suppressed burrs is possible for light chamfering
  [Applications]
  · Work materials: Mild steel, carbon steel, alloy steel, tempered steel, stainless steel, titanium alloy

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	90	-	-	-	-	-	Non-Coated / ALT	-

  From: ₹ 4,136.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,203.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  ·Ideal for chamfering and V-groove
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,132.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  • Non-Coated
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	NA	-	0.15 ～ 5

  From: ₹ 3,471.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill Standard NC-LDS

  OSG

  Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	90 ～ 130	Centering (Positioning) / Hole Chamfer	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 970.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiCN	-

  From: ₹ 4,961.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Brazing shape, angle tolerance ±15'.
  Maintaining shape accuracy with a straight cutting edge.
  Applications, Hole chamfering/chamfering/horizontal running Work material, General steel/Heat-treated steel/Stainless steel/Cast iron/Aluminum/Copper/Resin
  Single-edge blade
  2 blades

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10 ～ 60	60 ～ 90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: ₹ 10,884.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Seat Mini Chamfer (Dovetail 45° Blade)

  NOGA JAPAN

  [Features]
  · Mini chamfer consisting only of back chamfer blade.
  · Ideal for chamfering undersides of shallow bases.
  [Applications]
  · Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
  · A mini chamfer that can chamfer and deburr by back milling drill holes.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	1.5 ～ 6	45	-	-	-	-	-	TiAlN	-

  From: ₹ 5,924.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New Chamfering Cutter

  EIKOSHA

  Chamfering New chamfering milling cutter with 1 flute.
  [Features]
  ·Can be re-polished.
  ·A shape that does not chatter when chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6	60	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 7,395.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Center reamer

  FUKUDA

  A cutting tool used for finishing the center hole and chamfering.
  [Features]
  ·Because it is designed with an odd number of flutes, machining with little chatter is possible.
  ·A rich lineup of 60°, 90° and 120°.
  [Applications]
  ·Ideal for finishing center holes, as well as chamfering corners.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	60 ～ 120	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 1,984.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Tool CFT (SKH57)

  TAIYO-TOOL

  [Applications]
  · Hole chamfer
  [Single Blade / Double Blade]
  · Single blade
  [Tool Grade]
  · High-speed steel
  [Coating Y/N] N
  [Coating Type] Non-Coated
  [Flute No.] 1-Flute

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 20	60 ～ 90	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: ₹ 9,938.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  6.3 to 20.5 mm Counter Sink (3-Flute, 6 Pcs. Set, HSS)

  ESCO

  [Features]
  ·"Set contents": 6 pcs. set
  ·Size (Cutting diameter × shank diameter): 6.3 × 5, 8.3 × 6, 10.4 × 6, 12.4 × 8, 16.5 × 10, 20.5 × 10 mm, 1 for each size
  ·Materials: HSS (high-speed steel)
  ·Tip angle: 90°
  ·Number of Grooves: 3
  ·Counter sink (countersunk) suitable for deburring metal.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	-	-	-	-	-	-

  From: ₹ 17,818.89
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  ·Easy high-quality processing of corner radius
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: ₹ 2,845.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 3,909.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 41,717.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,228.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

  OSG

  Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	Available	Available	TiCN	-

  From: ₹ 2,499.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center chamfer mill

  FUKUDA

  A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	4 ～ 40	60 ～ 120	Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other	general steel[○] / Cast Iron[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: ₹ 4,475.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GCCC, Carbide Center for Chamfering

  SANKO MFG

  [Features]
  · Melding the design concepts of endmills and drills, it is available for a wide range of applications.
  · Double angle adopted for the chamfer part.
  · Provides a clean finish with fewer burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	NA	Non-Coated	-

  From: ₹ 13,192.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 120° Chamfering Type N 6714

  GUHRING

  Taper half-angle 60° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	120	-	-	-	-	Available	TiAlN	-

  From: ₹ 3,447.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 60° Chamfering Type N 6711

  GUHRING

  Taper half-angle 30° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	60	-	-	-	-	Available	TiAlN	-

  From: ₹ 3,223.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter for 90° Chamfering Type N 6713

  GUHRING

  Taper half-angle 45° chamfering milling cutter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 12	90	-	-	-	-	Available	TiAlN	-

  From: ₹ 3,312.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 4	90°	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 3,217.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  High performance end mill with high versatility
  [Features]
  ·One end mill for all work materials
  ·Improved machine operating rate
  ·Minimize tool inventory
  ·Safe and predictable tool life
  ·High flexibility and optimized tooling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	8 ～ 12	90°	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	Available	Other	-

  From: ₹ 9,752.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T, 2-flute, Multi 90°

  Poulten&Graf

  [Features]
  · Blade diameters φ10 or less are high rigidity types with thick shank diameter.
  · A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	Double-edged	Available	Available	Other	-

  From: ₹ 3,199.78
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfer/Deburring Tool Set

  NOGA JAPAN

  [Features]
  · Universal deburring set.
  · Enables deburring of surfaces and deep holes.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Other	-	-	-	-	-	-

  From: ₹ 2,985.87
  Days to Ship: 5 Day(s)

  5 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Seat Mini Chamfer (120° Blade)

  NOGA JAPAN

  [Features]
  · A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 2 mm).
  · Ideal for machining.
  · Spiral blade provides smooth sharpness.
  · A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.
  [Applications]
  · Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
  · A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	2 ～ 5	120	-	-	-	-	-	TiAlN	-

  From: ₹ 5,924.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, C cutter, universal type

  BIG DAISHOWA SEIKI

  [Features]
  ・ Chamfering angle of 5° to 85° is available with this one
  ・ It can rotate with a wrench to swing the cartridge and adjust the chamfer angle
  [Applications]
  ・ Work material: Steel, cast iron, aluminum

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	5～85°	-	-	-	-	-	-	-

  From: ₹ 45,788.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Kadokko, Type: Chamfering Type- 0.6mm

  STAR-M

  [Features]
  · Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
  · Uses ceramic blade.
  · Cut end shape, chamfering width 0.6 mm.
  [Applications]
  · For cutting decorative tapes.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	-	-	-	-	-	-

  From: ₹ 3,319.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Reamer CF

  DAIICHITOOL

  [Features]
  A center reamer with an overall length of 45 to 99 mm and a handle diameter of 6 to 12 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6 ～ 50	60° ～ 90°	Centering (Positioning)	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	-	-	-

  From: ₹ 2,247.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 9,909.71
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]
  · Higher positioning precision than normal twist drills thanks to the small chisel edge.
  · Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 9,906.58
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]
  · Higher positioning precision than normal twist drills thanks to the small chisel edge.
  · Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 12,841.62
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,684.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  ·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 5,127.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering. Can also be used as a deburring tool
  ·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
  ·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TS	-

  From: ₹ 3,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,456.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  MISUMI

  The sharp helix blade achieves the clean machined surface with less burr

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 4,113.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	-	-

  From: ₹ 3,281.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	NOGA JAPAN	OSG	NOGA JAPAN	FUKUDA	MISUMI	OSG	IWATA TOOL	MAKOTOLOY	MISUMI	MISUMI	OSG	OSG	ASAHI TOOLS	NOGA JAPAN	EIKOSHA	FUKUDA	TAIYO-TOOL	ESCO	MISUMI	MISUMI	OSG	OSG	OSG	FUKUDA	SANKO MFG	GUHRING	GUHRING	GUHRING	KYOWA SEIKO	SANDVIK	Poulten&Graf	NOGA JAPAN	NOGA JAPAN	BIG DAISHOWA SEIKI	STAR-M	DAIICHITOOL	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Back Seat Mini Chamfer (90° Blade)	Leading Drill VP-LDS	Long Reach Back Spot Facing Mini Chamfer 90° Blade (for deep holes)	Corner Rounding End Mill	TS coated carbide chamfering end mill, 3-flute / short model	Leading Drill TIN-NC-LDS	High Speed Chamfering Tool TOGLON® Multi Chamfer	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°	TS coated carbide chamfer, V grooving end mill, 2-flute	Carbide inner R-cutter, 2-flute	Leading Drill Standard NC-LDS	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	CMC MC Chamfering Cutter G2	Back Seat Mini Chamfer (Dovetail 45° Blade)	New Chamfering Cutter	Center reamer	Chamfering Tool CFT (SKH57)	6.3 to 20.5 mm Counter Sink (3-Flute, 6 Pcs. Set, HSS)	TS coated carbide inner R-cutter, 2-flute	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	3-flute Chamfering Cutter (positive type) HSCT-P	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank	Center chamfer mill	GCCC, Carbide Center for Chamfering	Milling Cutter for 120° Chamfering Type N 6714	Milling Cutter for 60° Chamfering Type N 6711	Milling Cutter for 90° Chamfering Type N 6713	Carbide Chamfering Cutter KMC-2	CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank	SPEED/T, 2-flute, Multi 90°	Chamfer/Deburring Tool Set	Back Seat Mini Chamfer (120° Blade)	Chamfering cutter, C cutter, universal type	Cutter Kadokko, Type: Chamfering Type- 0.6mm	Center Reamer CF	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°	V Spot Carbide Drill, Standard Type, TiN Coat, 120°	V Spot Carbide Drill, Long Type, TiN Coat, 120°	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 2-flute / short model	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
CAD					2D / 3D				2D / 3D	2D / 3D									2D / 3D	2D / 3D																				2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	₹ 5,924.49	₹ 1,839.35	₹ 6,024.95	₹ 5,768.05	₹ 4,434.02	₹ 1,437.53	₹ 4,136.40	₹ 11,203.09	₹ 4,132.20	₹ 3,471.11	₹ 970.07	₹ 4,961.47	₹ 10,884.27	₹ 5,924.49	₹ 7,395.99	₹ 1,984.75	₹ 9,938.27	₹ 17,818.89	₹ 2,845.24	₹ 3,909.85	₹ 41,717.11	₹ 8,228.25	₹ 2,499.65	₹ 4,475.55	₹ 13,192.04	₹ 3,447.56	₹ 3,223.89	₹ 3,312.29	₹ 3,217.20	₹ 9,752.47	₹ 3,199.78	₹ 2,985.87	₹ 5,924.49	₹ 45,788.87	₹ 3,319.36	₹ 2,247.05	₹ 9,909.71	₹ 9,906.58	₹ 12,841.62	₹ 4,684.04	₹ 5,127.56	₹ 3,560.00	₹ 4,456.00	₹ 4,113.64	₹ 3,281.98
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s)	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications					TS General Steel 3 Flutes S (Short)				TS General Steel 2 Flutes	Non-Coated General Steel 2 Flutes									TS General Steel 2 Flutes	Non-Coated Aluminum 2 Flutes																				TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS SUS 2 Flutes	Non-Coated Aluminum 2 Flutes	TiCN 2 Flutes S (Short)
Tool Material Type	-	Powder high-speed steel	-	High-speed steel	Carbide	High-speed steel	-	Carbide	Carbide	Carbide	High-speed steel	Powder high-speed steel	Carbide	-	High-speed steel	High-speed steel	High-speed steel	-	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	-	-	-	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel
Tool Diameter (D)(mm)	1.5 ～ 6	3 ～ 25	3 ～ 12	-	3 ～ 12	3 ～ 25	-	1 ～ 20	3 ～ 16	-	3 ～ 25	-	10 ～ 60	1.5 ～ 6	6	-	10 ～ 20	-	-	3 ～ 12	16 ～ 25	1 ～ 2	3 ～ 25	4 ～ 40	10	4 ～ 12	4 ～ 12	4 ～ 12	0.3 ～ 4	8 ～ 12	3 ～ 20	-	2 ～ 5	-	-	6 ～ 50	3 ～ 20	3 ～ 25	3 ～ 25	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	10 ～ 25
Tip angle (θ)	90	90	90	-	90	60 ～ 120	90	90	60 ～ 120	-	90 ～ 130	-	60 ～ 90	45	60	60 ～ 120	60 ～ 90	-	-	90	90	90	90	60 ～ 120	-	120	60	90	90°	90°	90	-	120	5～85°	-	60° ～ 90°	60	120	120	90	90	60 ～ 120	90	90	60 ～ 120
Application	-	Centering (Positioning) / Hole Chamfer	-	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Round Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	-	Chamfering/Horizontal	Hole Chamfer	Hole Chamfer	-	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	-	-	Chamfering/Horizontal	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Other	-	-	-	Centering (Positioning)	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal
work material	-	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	-	general steel[○] / Cast Iron[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	-	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	-	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Single blade, two blades	-	Single blade	-	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-	Single blade	Single blade	Double-edged	-	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	-	NA	-	NA	Available	NA	-	-	NA	NA	NA	NA	Available	-	-	NA	-	-	NA	NA	NA	NA	Available	Available	Available	-	-	-	-	NA	Available	-	-	-	-	Available	-	-	-	Available	NA	Available	NA	NA	Available
Coating Y/N	-	Available	-	NA	Available	Available	-	Available	Available	NA	NA	Available	NA	-	-	NA	NA	-	Available	NA	Available	NA	Available	NA	NA	Available	Available	Available	NA	Available	Available	-	-	-	-	-	NA	Available	Available	Available	Available	Available	Available	NA	Available
Coating Type	TiAlN	TiCN	TiAlN	Non-Coated	TS	TiN	Non-Coated / ALT	TiAlN	TS	-	Non-Coated	TiCN	Non-Coated	TiAlN	-	Non-Coated	Non-Coated	-	TS	-	TiAlN	Non-Coated	TiCN	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	-	Other	Other	-	TiAlN	-	-	-	-	TiN	TiN	TS	TS	TS	TS	-	-
R Size (R)(mm)	-	-	-	0.5 ～ 30	-	-	-	-	-	0.15 ～ 5	-	-	-	-	-	-	-	-	0.1 ～ 5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...