• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Spot Drill

  Nine9

  Insert for NC spot drill holder.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2–10 ～ 3~14	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: ₹ 3,043.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Engraving Cutter

  Nine9

  The special insert design realizes an ultra-long operating life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.45～2.1 ～ 0.65～2.7	45 ～ 60	Centering (Positioning) / Engraved	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: ₹ 3,639.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, G Coating 60°

  OKABE

  Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel, stainless steel, cast iron and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 6	60	Centering (Positioning)	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiN	-

  From: ₹ 1,754.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Helix Center Drills-Type A 90°, Coated_CD-Q-V

  YAMAWA MFG

  For drilling 90° center holes, it is a weak helix groove A-type center hole drill that can process positioning and chamfering at the same time, and has a coating with excellent wear and adhesion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 2,677.42
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

  MISUMI

  Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 20	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 444.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated High-Speed Steel Countersink / 3-Flute / 90°

  MISUMI

  Necessities in hole chamfering and deburring are available at low prices

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 1,472.87
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, TiN Coating 90°

  ILIX

  Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TiN	-

  From: ₹ 2,974.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G

  THE CUT

  [Features]
  · The tool life is drastically improved through the use of 3 flutes and a TiN coating.
  · No chatter.
  · Capable of true circular machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 31	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 3,386.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Countersink, with Holes / 90°

  MISUMI

  Frequently used standard sizes are offered at affordable prices

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 35	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 1,071.17
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Center Drill, Regular Model

  MISUMI

  Frequently used standard sizes are offered at affordable prices

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Double-edged	NA	Available	TiN	-

  From: ₹ 740.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set

  MISUMI

  Frequently used standard sizes are offered in a set at an affordable price

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3/8.3/10.4/12.4/16.5/20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 6,868.00
  Days to Ship: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink Set TiN Coating 6 Pairs

  ILIX

  Ideal for chamfering, countersinking, and deburring. Frequently used sizes are selected and stored in a metal case. A handle is attached to enable manual operation.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3,8.3,10.4,12.4,16.5,20.5	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	Available	Available	TiN	-

  From: ₹ 25,190.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tips for Chibimomi C22GUX

  FUJIGEN

  An indexable insert for Chibimomi that can be used for center spotting and chamfering.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	-	-	-	Available	TiN	-

  From: ₹ 1,903.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Tip for Momimen / All C32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available	TiN	-

  From: ₹ 2,167.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tips for Decamomi T32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	-	-	-	Available	TiN	-

  From: ₹ 2,410.87
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for 60° Momimen D43GUX

  FUJIGEN

  An indexable insert for 60° Momimen that can be used for center spotting and chamfering.
  [Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Cast Iron[○]	-	-	Available	TiN	-

  From: ₹ 3,001.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR

  FUJIGEN

  Inserts for chamfering cutters / R Cindo-Cutters / Baitenders.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal / Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	TiN	-

  From: ₹ 1,344.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal / Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available	TiN	-

  From: ₹ 1,916.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Ryanmen Cut/V T22MOR

  FUJIGEN

  A K10 grade carbide insert for Ryanmencut-V.
  [Applications]Used for back and surface chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Available	TiN	-

  From: ₹ 1,435.80
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S32MOZ Chip S32GUR

  FUJIGEN

  S-type precision insert for face machining.
  [Applications]Used for face milling and chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Chamfering/Horizontal / Round Chamfer	Stainless Steel[○] / Aluminum[○] / Resin[○]	-	-	Available	TiN	-

  From: ₹ 1,332.67
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  N-Type N43GUR Tip

  FUJIGEN

  This is an insert for N-type that can be used for face machining.
  [Applications]Used for face milling and chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Round Chamfer	-	-	-	Available	TiN	-

  From: ₹ 1,970.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  N-Type N43MOZ Tip

  FUJIGEN

  An insert that can perform chamfering.
  Compatible models: Nice-Corner VR
  [Applications]Used for face milling and chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Round Chamfer	-	-	-	Available	TiN	-

  From: ₹ 1,293.82
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-type T33MOZ Tip

  FUJIGEN

  A carbide insert for T-type that can perform shoulder processing.
  Compatible models: New Nice Cut / Skat Cut
  [Applications]It is used for shoulder processing.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	TiN	-

  From: ₹ 1,612.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-type T33MOR Tip

  FUJIGEN

  [Features]
  Materials: Cermet, carbide grade K10, carbide grade M20
  Number of corners used: 6

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	TiN	-

  From: ₹ 1,293.82
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  T-type T33GUR Tip

  FUJIGEN

  [Features]
  Materials: Cermet, carbide grade K10, carbide grade M20
  Edge shape: Honed edge, sharp edge

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Stainless Steel[○] / Aluminum[○] / Resin[○]	-	-	Available	TiN	-

  From: ₹ 1,612.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shuririn C32GUR Tip

  FUJIGEN

  [Features]
  ·For Shurillin (C32GUR)
  Materials: Carbide grade K10, carbide grade M20
  Edge shape: Honed edge, sharp edge

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Available	TiN	0.2 ～ 0.8

  From: ₹ 1,688.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Maru Chan Tip

  FUJIGEN

  [Features]
  ·for Maru-chan
  Materials: Carbide grade K10, cermet
  Edge shape: Sharp edge, honed edge
  Number of corners used: 360° double-sided

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	-	-	-	Available	TiN	-

  From: ₹ 1,135.78
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.
  · Finest surface finish without any chatter marks.
  [Applications]
  · Work materials: Aluminum, stainless steel, iron, resin, copper.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: ₹ 2,525.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink (Titanium Coating)【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.
  · Its surface has high hardness due to the surface titanium coating and has improved heat and wear resistance as well as sharpness compared to cobalt high-strength steel.
  · It easily expels chips because it uses 3 flute edges, providing a beautiful finish.
  [Applications]
  · Work materials: Iron, casting, stainless steel.
  · Chamfering.
  · Deburring.
  · For countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	Available	TiN	-

  From: ₹ 2,460.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Boy

  BIG DAISHOWA SEIKI

  [Features]
  ·Accurate positioning of drilled holes and chamfering are performed at once.
  ·High-precision indexable bit with excellent sharpness.
  ·The cutting edge can be replaced, eliminating the need for regrinding.
  ·It is a long shank type with little work interference.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90 ～ 120	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	NA	Available	TiN	-

  From: ₹ 10,361.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High speed coating for Center Boy throwaway bit【5 Pieces Per Package】

  BIG DAISHOWA SEIKI

  [Features]
  · Shows outstanding sharpness as it has a cutting edge with precision finishing.
  · Because it is a disposable item with replaceable edge, it does not require regrinding and always performs smoothly.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	NA	Available	TiN	-

  From: ₹ 2,187.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank

  OKAZAKI SEIKO

  Work Material Aluminum/Copper
  Tool Grade, Cobalt High-Speed Steel
  Tip angle (θ) 90
  With or without coating: with coating
  Coating type, TiN

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	30	90	Hole Chamfer	Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 6,993.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

  OKAZAKI SEIKO

  1-flute type. For steel and stainless steel. All products are TiN coated.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	66	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 35,799.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

  OKAZAKI SEIKO

  3-flute type. For steel and stainless steel. All products are TiN coated.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	20	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 7,456.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute 90° 327

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	5 ～ 31	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 2,215.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute, 90° (Set of 327) 499

  GUHRING

  [Features]
  · 6-piece set of 327.
  · Steel case provided.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.30/8.30/10.40/12.40/16.50/20.50	90	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 26,635.16
  Days to Ship: 24 Day(s) or more

  24 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Shank Countersink, 3-Flute 90° 328

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	25 ～ 50	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 11,992.91
  Days to Ship: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Starting Drills for Chamfering (90°), Coated_NC-SD-V

  YAMAWA MFG

  A drill for chamfering the end face after drilling with a drill.
  [Features]
  · Adopts cobalt high-speed steel with excellent wear resistance.
  [Applications]
  · By using NC-SD V, larger than the diameter after hole drilling, cleanly-finished chamfered surfaces can be achieved.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90°	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	Available	TiN	-

  From: ₹ 1,548.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint- NC Starting Drills for Chamfering 90°, Coated_JO-NCSD-V

  YAMAWA MFG

  [Specifications]
  · Shape: Centering
  · Countersink
  · Coating: TiN
  · Tool material: HSS
  [Applications] Centering (positioning) / hole chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 16	90	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	Available	TiN	-

  From: ₹ 2,534.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V

  YAMAWA MFG

  [Features]
  ·Coating with excellent abrasion resistance and chip-adhesion-resistance
  [Applications]
  ·Center Hole Drilling
  ・ Chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 12	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 5,266.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint- High Helix Center Drills-Type A 60°, Coated_JO-CES-V

  YAMAWA MFG

  [Specifications]
  · Shape: Centering/countersink
  · Coating: TiN
  · Tool material: HSS
  [Applications] Centering (positioning) / hole chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 16	60°	Centering (Positioning) / Hole Chamfer	-	Single blade	NA	Available	TiN	-

  From: ₹ 3,166.29
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 60°, Coated_CE-S-V

  YAMAWA MFG

  Centering hole drill with a coating suitable for soft materials and relatively viscous materials thanks to its groove with high torsion.
  [Features]
  · Since it has a coating, stable processing is possible even if the cutting speed is increased, and the tool life is improved.
  [Applications]
  · Used for A-type 60° center drilling.
  · Guidelines for machining requirements are, carbon steel 15-30, steel alloy 10-25, stainless steel 5-12, and cast iron: 8-15 m/min.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	60°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 1,833.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Helix Center Drills-Type A 60°, Coated, (Old JIS Type 1 )_CE-S-V(I)

  YAMAWA MFG

  Former JIS 1-type center hole drill with a strong helical groove coated with excellent wear resistance and adhesion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	8 ～ 14	60°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 3,231.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 90°, Coated_CE-Q-V

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	90°	Centering (Positioning) / Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 2,033.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	Nine9	Nine9	OSG	OKABE	YAMAWA MFG	MISUMI	MISUMI	ILIX	THE CUT	MISUMI	MISUMI	MISUMI	ILIX	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	GUHRING	GUHRING	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Insert for Spot Drill	Insert for Engraving Cutter	Leading Drill TIN-NC-LDS	Center Drill, Okabe Standard, Type 1, G Coating 60°	Low Helix Center Drills-Type A 90°, Coated_CD-Q-V	TiN Coated / Non-Coated High-Speed Steel NC Spot Drill	TiN Coated High-Speed Steel Countersink / 3-Flute / 90°	Straight Shank, Countersink, HSS, TiN Coating 90°	Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G	TiN-Coated High-Speed Steel Countersink, with Holes / 90°	TiN-Coated High-Speed Steel Center Drill, Regular Model	TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set	Counter Sink Set TiN Coating 6 Pairs	Tips for Chibimomi C22GUX	Tip for Momimen / All C32GUX	Tips for Decamomi T32GUX	Tip for 60° Momimen D43GUX	Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR	Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR	Tip for Ryanmen Cut/V T22MOR	S32MOZ Chip S32GUR	N-Type N43GUR Tip	N-Type N43MOZ Tip	T-type T33MOZ Tip	T-type T33MOR Tip	T-type T33GUR Tip	Shuririn C32GUR Tip	Maru Chan Tip	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	Counter Sink (Titanium Coating)【1-6 Pieces Per Package】	Center Boy	High speed coating for Center Boy throwaway bit【5 Pieces Per Package】	CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank	CS2S Type II Chamfering Cutter (Single Flute), Straight Shank	CS3S Type III Chamfering Cutter (3-Flute), Straight Shank	Straight Shank, Countersink 3-Flute 90° 327	Straight Shank, Countersink 3-Flute, 90° (Set of 327) 499	Tapered Shank Countersink, 3-Flute 90° 328	NC Starting Drills for Chamfering (90°), Coated_NC-SD-V	Joint- NC Starting Drills for Chamfering 90°, Coated_JO-NCSD-V	Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V	Joint- High Helix Center Drills-Type A 60°, Coated_JO-CES-V	High Helix Center Drills-Type A 60°, Coated_CE-S-V	High Helix Center Drills-Type A 60°, Coated, (Old JIS Type 1 )_CE-S-V(I)	High Helix Center Drills-Type A 90°, Coated_CE-Q-V
CAD						2D / 3D	2D / 3D				2D / 3D
From	₹ 3,043.65	₹ 3,639.69	₹ 1,437.53	₹ 1,754.58	₹ 2,677.42	₹ 444.00	₹ 1,472.87	₹ 2,974.38	₹ 3,386.38	₹ 1,071.17	₹ 740.00	₹ 6,868.00	₹ 25,190.33	₹ 1,903.25	₹ 2,167.11	₹ 2,410.87	₹ 3,001.55	₹ 1,344.73	₹ 1,916.64	₹ 1,435.80	₹ 1,332.67	₹ 1,970.22	₹ 1,293.82	₹ 1,612.60	₹ 1,293.82	₹ 1,612.60	₹ 1,688.95	₹ 1,135.78	₹ 2,525.09	₹ 2,460.24	₹ 10,361.02	₹ 10,935.62	₹ 6,993.33	₹ 35,799.67	₹ 7,456.76	₹ 2,215.33	₹ 26,635.16	₹ 11,992.91	₹ 1,548.11	₹ 2,534.11	₹ 5,266.38	₹ 3,166.29	₹ 1,833.78	₹ 3,231.93	₹ 2,033.35
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	24 Day(s) or more	23 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more
Tool Material Type	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel
Tool Diameter (D)(mm)	2–10 ～ 3~14	0.45～2.1 ～ 0.65～2.7	3 ～ 25	0.3 ～ 6	4 ～ 18	2 ～ 20	6.3 ～ 20.5	4.3 ～ 37	6.3 ～ 31	10 ～ 35	1 ～ 4	6.3/8.3/10.4/12.4/16.5/20.5	6.3,8.3,10.4,12.4,16.5,20.5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30	66	20	5 ～ 31	6.30/8.30/10.40/12.40/16.50/20.50	25 ～ 50	3 ～ 25	10 ～ 16	4 ～ 12	10 ～ 16	4 ～ 18	8 ～ 14	4 ～ 18
Tip angle (θ)	90	45 ～ 60	60 ～ 120	60	90°	90 ～ 120	-	90	90	-	-	-	90	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	90	90	90 ～ 120	90	90	90	90	90	90	90	90°	90	90°	60°	60°	60°	90°
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	Centering (Positioning) / Engraved	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Centering (Positioning)	Hole Chamfer	Hole Chamfer	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal / Round Chamfer	Chamfering/Horizontal / Round Chamfer	Chamfering/Horizontal	Chamfering/Horizontal / Round Chamfer	Round Chamfer	Round Chamfer	-	-	-	-	-	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	-	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	general steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Stainless Steel[○] / Aluminum[○] / Resin[○]	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Stainless Steel[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	-	-	-	-	-
Single blade, two blades	Single blade	Single blade	Single blade	Double-edged	Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	Single blade	Single blade	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Single blade	Single blade	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	Single blade	Double-edged	Double-edged	Double-edged
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	Available	-	NA	NA	NA	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	NA	NA	NA	NA	NA	NA	NA	-	-	-	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.2 ～ 0.8	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...