Chamfering / Centering Tools（work material：Aluminum Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,456.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack

  MISUMI

  Carbide spot drill that contributes to higher efficiency in chamfering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90 ～ 120	Centering (Positioning) / Hole Chamfer	Aluminum[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,998.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide NC Spot Drill

  MISUMI

  The non-coated design allows the edge of the tip to stand, achieving the high cut-off performance.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 2	-	Centering (Positioning) / Hole Chamfer	Aluminum[◎]	Single blade	NA	NA	-	-

  From: ₹ 3,648.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack

  MISUMI

  A carbide countersink that's essential in chamfering and deburring

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6.3 ～ 20.5	-	Hole Chamfer	Aluminum[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 4,580.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Countersink, with Holes / 90°

  MISUMI

  It is effective in hole chamfering and deburring of light metals.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 25	-	Hole Chamfer	Aluminum[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,568.80
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	Aluminum[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Corner Rounding Type FX-ECR

  OSG

  Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 1.5	-	Round Chamfer	Aluminum[○]	Single blade	NA	Available	TiAlN	0.1 ～ 2

  From: ₹ 6,517.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SV Spiral Chamfer Cutter

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Aluminum[○]	Single blade	NA	NA	-	-

  From: ₹ 6,426.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[◎]	-	-	Available	TiAlN	-

  From: ₹ 4,202.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Centering Tool, Long Type

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering, Long

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	12 ～ 50	90 ～ 118	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○]	-	-	-	-	-

  From: ₹ 22,452.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-CRC S Coated Corner Rounding Cutter

  SANKO MFG

  Cutter dedicated to round chamfering with TiCN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	9 ～ 46	-	Round Chamfer	Aluminum[○]	-	NA	Available	TiCN	0.5 ～ 15

  From: ₹ 6,074.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius Cutter Carbide for Aluminum

  IWATA TOOL

  [Features]
  · The raking blades/flutes ensure a highly precise rounded form.
  · First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracy

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 5	-	Round Chamfer	Aluminum[○]	Single blade	NA	NA	-	0.5 ～ 3

  From: ₹ 6,434.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A Type 60゜

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	60	Centering (Positioning)	Aluminum[○]	Single blade	NA	NA	-	-

  From: ₹ 2,329.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 90°, ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 2,626.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°, Long Type ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 4	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 4,800.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Brazing shape, angle tolerance ±15'.
  Maintaining shape accuracy with a straight cutting edge.
  Applications, Hole chamfering/chamfering/horizontal running Work material, General steel/Heat-treated steel/Stainless steel/Cast iron/Aluminum/Copper/Resin
  Single-edge blade
  2 blades

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10 ～ 60	60 ～ 90	Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	Available	NA	Non-Coated	-

  From: ₹ 10,884.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 90° 557

  GUHRING

  [Features]
  · Allows simultaneous centering and chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 12.7	90	Centering (Positioning) / Hole Chamfer	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 2,847.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Shank Countersink, 3-Flute 90° 477

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	15 ～ 100	90	Hole Chamfer	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 5,424.51
  Days to Ship: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Deburring EW100G 4100

  GUHRING

  [Features]
  · A deburring fork for chamfering and deburring of hole entrances and exits.
  · Internal oil supply type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 65,355.69
  Days to Ship: 24 Day(s) or more

  24 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Noncoat KCD-90

  KYOWA SEIKO

  Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 3	120°	Centering (Positioning)	Aluminum[○]	Double-edged	-	NA	-	-

  From: ₹ 4,694.55
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 4	90°	Chamfering/Horizontal	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 3,217.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Inversed Chamfering Cutter KUMW-4

  KYOWA SEIKO

  4 straight flutes.
  90° (included angle type)
  Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin
  Single-edge blade
  Tool grade, Carbide

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Chamfering/Horizontal	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 8,213.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Rounding Cutter CRC

  EIKOSHA

  Flute shape: Right-hand straight flute
  Work material: General steel / heat-treated steel / aluminum / copper
  [Applications]Used for round chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	9 ～ 48	-	Round Chamfer	Aluminum[○]	-	-	-	-	R0.5 ～ R16

  From: ₹ 6,986.35
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]
  ·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
  ·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
  ·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
  ·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
  ・ Standard type

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 8,389.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,203.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,904.04
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Set Drill, Carbide C-NC-PSD

  THE CUT

  [Features]
  · Allows for machining at higher speeds and a significantly longer tool life than with a high speed steel (TiAlN) point set drill.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Hole Chamfer	Aluminum[○]	Single blade	-	NA	-	-

  From: ₹ 3,256.47
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Chamfering Cutter Super Mentori-Maru MTMS 20/30

  THE CUT

  [Features]
  · Can be used like an end mill for machining materials from an un-machined state.
  · Capable of ramping machining (α = 3°).
  · Standard positive inserts of various manufacturers are mountable.
  · Capable of high speed machining because of the 3-flute/4-flute design.
  · Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
  · The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
  · The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
  · Change the insert material or machining conditions for use with different types of work material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	Aluminum[○]	-	-	-	-	-

  From: ₹ 26,600.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For Super Mentori-Maru ZERO

  THE CUT

  [Features]
  ·The unique shape allows high-precision machining.
  Set screw: MST-3S
  Wrench: MFT-9

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	Aluminum[○]	-	-	-	-	-

  From: ₹ 3,854.29
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coated Single End Point Drill PE-90°_AUPES

  YAMAWA MFG

  Single-edged coating point drill capable of simultaneous centering and chamfering. [Features]·Good surface roughness can be obtained by improving accuracy with a single-edged shape. ·High-rigidity design enables high-speed cutting and grooving, etc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.5 ～ 5	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	Available	Available	-	-

  From: ₹ 1,690.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,684.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  ·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	NA	Available	TS	-

  From: ₹ 5,127.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering. Can also be used as a deburring tool
  ·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
  ·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	Available	Available	TS	-

  From: ₹ 3,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
  ·Peripheral flutes enable inclined, contour and helical cutting
  ·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
  ·With helix angle on the peripheral flutes
  ·Can also be used as a deburring tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	Available	Available	TS	-

  From: ₹ 4,434.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  ·Easy high-quality processing of corner radius
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Aluminum[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: ₹ 2,845.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  MISUMI

  The sharp helix blade achieves the clean machined surface with less burr

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[◎]	Single blade	NA	NA	-	-

  From: ₹ 4,113.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Aluminum[○]	Single blade	Available	Available	-	-

  From: ₹ 3,281.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack

  MISUMI

  TiAlN coated type of the popular spot drill

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 12	90	Centering (Positioning) / Hole Chamfer	Aluminum[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 999.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, Regular Model

  MISUMI

  TiAlN coated type of the popular center drill

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	Aluminum[○]	Double-edged	NA	Available	TiAlN	-

  From: ₹ 976.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, Long Model

  MISUMI

  The adoption of TiAlN coating with excellent wear resistance allows for the long service life and high-speed cutting.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	Aluminum[○]	Double-edged	NA	Available	TiAlN	-

  From: ₹ 1,480.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model

  MISUMI

  The 90° type that's simultaneously capable of chamfering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	Aluminum[○]	Double-edged	NA	Available	TiAlN	-

  From: ₹ 902.80
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model

  MISUMI

  Ideal for the hole chamfering of countersunk bolts with 90° chamfer.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6.3 ～ 20.5	-	Hole Chamfer	Aluminum[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,724.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°

  MISUMI

  1-flute type with high versatility in countersink

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 25	-	Hole Chamfer	Aluminum[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,672.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Countersink, with Holes / 90°

  MISUMI

  Frequently used standard sizes are offered at affordable prices

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 35	-	Hole Chamfer	Aluminum[○]	Single blade	NA	Available	TiN	-

  From: ₹ 1,071.17
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Center Drill, Regular Model

  MISUMI

  Frequently used standard sizes are offered at affordable prices

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	Aluminum[○]	Double-edged	NA	Available	TiN	-

  From: ₹ 740.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	UNION TOOL	DIXI	EIKOSHA	SANKO MFG	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	ASAHI TOOLS	GUHRING	GUHRING	GUHRING	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	EIKOSHA	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	THE CUT	THE CUT	THE CUT	YAMAWA MFG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack	Carbide NC Spot Drill	TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack	TiAlN Coated High-Speed Steel Countersink, with Holes / 90°	Leading Drill TIN-NC-LDS	2-flute, Corner Rounding Type FX-ECR	SV Spiral Chamfer Cutter	Carbide Solid Chamfering Endmill 3-Flute	Carbide Centering Tool, Long Type	S-CRC S Coated Corner Rounding Cutter	Corner Radius Cutter Carbide for Aluminum	Carbide HG Center Drill Bit A Type 60゜	Carbide SP Center, 90°, ALD Coating	Carbide SP Center 90°, Long Type ALD Coating	CMC MC Chamfering Cutter G2	NC Spotting Drill 90° 557	Tapered Shank Countersink, 3-Flute 90° 477	Deburring EW100G 4100	Carbide Center Drill Noncoat KCD-90	Carbide Chamfering Cutter KMC-2	Carbide Inversed Chamfering Cutter KUMW-4	Corner Rounding Cutter CRC	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	Point Set Drill, Carbide C-NC-PSD	Chamfering Cutter Super Mentori-Maru MTMS 20/30	Insert For Super Mentori-Maru ZERO	Coated Single End Point Drill PE-90°_AUPES	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 2-flute / short model	TS coated carbide chamfering end mill, 3-flute / short model	TS coated carbide inner R-cutter, 2-flute	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack	TiAlN Coated High-Speed Steel Center Drill, Regular Model	TiAlN Coated High-Speed Steel Center Drill, Long Model	TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model	TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model	TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°	TiN-Coated High-Speed Steel Countersink, with Holes / 90°	TiN-Coated High-Speed Steel Center Drill, Regular Model
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D																											2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D
From	₹ 4,456.00	₹ 1,998.00	₹ 3,648.20	₹ 4,580.60	₹ 1,568.80	₹ 1,437.53	₹ 6,517.84	₹ 6,426.76	₹ 4,202.24	₹ 22,452.49	₹ 6,074.51	₹ 6,434.42	₹ 2,329.18	₹ 2,626.53	₹ 4,800.36	₹ 10,884.27	₹ 2,847.53	₹ 5,424.51	₹ 65,355.69	₹ 4,694.55	₹ 3,217.20	₹ 8,213.13	₹ 6,986.35	₹ 8,389.02	₹ 11,203.09	₹ 11,904.04	₹ 3,256.47	₹ 26,600.76	₹ 3,854.29	₹ 1,690.87	₹ 4,684.04	₹ 5,127.56	₹ 3,560.00	₹ 4,434.02	₹ 2,845.24	₹ 4,113.64	₹ 3,281.98	₹ 999.00	₹ 976.00	₹ 1,480.00	₹ 902.80	₹ 1,724.20	₹ 1,672.40	₹ 1,071.17	₹ 740.00
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	23 Day(s) or more	24 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications	TS SUS 2 Flutes																														TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 2 Flutes	Non-Coated Aluminum 2 Flutes	TiCN 2 Flutes S (Short)
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	High-speed steel	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	-	-	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel
Tool Diameter (D)(mm)	3 ～ 12	2 ～ 12	0.3 ～ 2	6.3 ～ 20.5	10 ～ 25	3 ～ 25	0.5 ～ 1.5	0.8 ～ 1	2 ～ 12	12 ～ 50	9 ～ 46	3 ～ 5	0.2 ～ 3	0.1 ～ 6	0.5 ～ 4	10 ～ 60	10 ～ 12.7	15 ～ 100	-	0.3 ～ 3	0.3 ～ 4	-	9 ～ 48	1 ～ 20	1 ～ 20	3 ～ 20	3 ～ 10	-	-	0.5 ～ 5	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	-	3 ～ 12	10 ～ 25	2 ～ 12	1 ～ 4	1 ～ 4	1 ～ 4	6.3 ～ 20.5	10 ～ 25	10 ～ 35	1 ～ 4
Tip angle (θ)	90	90 ～ 120	-	-	-	60 ～ 120	-	90	90	90 ～ 118	-	-	60	90	90	60 ～ 90	90	90	-	120°	90°	-	-	60	120	120	90	-	-	60	90	90	60 ～ 120	90	-	90	60 ～ 120	90	-	-	-	-	-	-	-
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Round Chamfer	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Chamfering/Horizontal	Round Chamfer	Round Chamfer	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Hole Chamfer	Centering (Positioning)	Chamfering/Horizontal	Chamfering/Horizontal	Round Chamfer	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Hole Chamfer	Hole Chamfer	Hole Chamfer	Centering (Positioning)
work material	Aluminum[○]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade	Single blade	Single blade	Single blade	Double-edged	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	Double-edged	Double-edged	Single blade	Single blade	Single blade	Double-edged
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	NA	-	-	NA	NA	NA	NA	NA	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	Available	Available	NA	Available	Available	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	Available	Available	NA	Available	Available	Available	Available	NA	Available	-	Available	NA	NA	Available	Available	NA	NA	NA	NA	NA	NA	NA	-	NA	Available	Available	NA	-	-	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TS	TiAlN	-	TiAlN	TiAlN	TiN	TiAlN	-	TiAlN	-	TiCN	-	-	Other	Other	Non-Coated	-	-	-	-	-	-	-	-	TiAlN	TiAlN	-	-	-	-	TS	TS	TS	TS	TS	-	-	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiN	TiN
R Size (R)(mm)	-	-	-	-	-	-	0.1 ～ 2	-	-	-	0.5 ～ 15	0.5 ～ 3	-	-	-	-	-	-	-	-	-	-	R0.5 ～ R16	-	-	-	-	-	-	-	-	-	-	-	0.1 ～ 5	-	-	-	-	-	-	-	-	-	-

Loading...