Chamfering / Centering Tools（Application：Chamfering/Horizontal Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,281.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Single blade	NA	Available	TiAlN	-

  From: ₹ 10,124.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC

  OSG

  Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Chamfering/Horizontal	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 10,025.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (negative type) HSCT-N

  OSG

  End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,178.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,228.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

  OSG

  Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,754.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Chamfering/Horizontal	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 8,754.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiCN	-

  From: ₹ 4,961.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide NC Center Drill 1106

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎]	-	-	NA	-	-

  From: ₹ 3,746.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide NC Center Drill 1107

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90 ～ 120	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	-	NA	-	-

  From: ₹ 3,697.27
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Centering Tool, Short Type

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	12 ～ 50	90 ～ 118	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 14,205.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Centering Tool, Short Type (Taper Shank)

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering, Morse Taper Shank

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	12 ～ 40	90 ～ 118	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 15,079.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Centering Tool, Long Type (Taper Shank)

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering, Long, Morse Taper Shank

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	12 ～ 40	90 ～ 118	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 21,290.78
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New Chamfering Cutter

  EIKOSHA

  Chamfering New chamfering milling cutter with 1 flute.
  [Features]
  ·Can be re-polished.
  ·A shape that does not chatter when chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6	60	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 7,395.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Centering tool

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 32	90 ～ 118	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 9,387.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Centering tool (taper shank)

  EIKOSHA

  Center Positioning, Plate/Internal Chamfering, External Chamfering, Morse Taper Shank

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 32	90 ～ 118	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: ₹ 11,266.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCCC AS Coated Carbide Center for Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	Available	TiAlN	-

  From: ₹ 8,059.49
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GCCC, Carbide Center for Chamfering

  SANKO MFG

  [Features]
  · Melding the design concepts of endmills and drills, it is available for a wide range of applications.
  · Double angle adopted for the chamfer part.
  · Provides a clean finish with fewer burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Chamfering/Horizontal	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	NA	Non-Coated	-

  From: ₹ 6,528.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CC, Center for Chamfering

  SANKO MFG

  Center chamfering cutter used in a large variety of different applications.
  
  [Features]
  · As the outer diameter and shank have the same diameter, interference with the workpiece can be avoided.
  · Used in a large variety of different applications.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6 ～ 32	-	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	-	Available	NA	Non-Coated	-

  From: ₹ 3,821.64
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center 120°

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.9 ～ 25	120	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 608.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 120° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.9 ～ 25	120	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: ₹ 950.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center 60°

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	60	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 671.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 60° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	60	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: ₹ 1,012.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90°

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 671.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: ₹ 1,012.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center Sharp 60°

  IWATA TOOL

  Ideal for aluminum, resin, etc. Capable of reducing burrs and improving surface roughness. Capable of high precision machining, and a superior finish can be achieved. DLC coating, effective for easily welded work materials, is also standardized.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 2	60	Chamfering/Horizontal	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 701.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center Sharp 60° DLC Coating

  IWATA TOOL

  Ideal for aluminum, resin, etc. Capable of reducing burrs and improving surface roughness. Capable of high precision machining, and a superior finish can be achieved. DLC coating, effective for easily welded work materials, is also standardized.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 2	60	Chamfering/Horizontal	Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: ₹ 1,757.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center Sharp 90°

  IWATA TOOL

  Ideal for aluminum, resin, etc. Capable of reducing burrs and improving surface roughness. Capable of high precision machining, and a superior finish can be achieved. DLC coating, effective for easily welded work materials, is also standardized.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 2	90	Chamfering/Horizontal	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 701.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center Sharp 90° DLC Coating

  IWATA TOOL

  Ideal for aluminum, resin, etc. Capable of reducing burrs and improving surface roughness. Capable of high precision machining, and a superior finish can be achieved. DLC coating, effective for easily welded work materials, is also standardized.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 2	90	Chamfering/Horizontal	Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: ₹ 1,757.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	60	Chamfering/Horizontal	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 5,488.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide DLC Coating

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 16	60	Chamfering/Horizontal	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: ₹ 8,641.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Chamfering/Horizontal	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 4,425.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Chamfering/Horizontal	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: ₹ 7,579.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 5,455.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Chamfering/Horizontal	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: ₹ 8,641.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° ALD Coating

  IWATA TOOL

  [Features]
  · HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	60	Chamfering/Horizontal	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: ₹ 7,579.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]
  · HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 1.5	90	Chamfering/Horizontal	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	ALT	-

  From: ₹ 6,836.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 120°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 1,293.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 1,943.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, Long Type, ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	120	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 4,282.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 60°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	60	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 2,006.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 60° ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	60	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 2,626.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	90	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: ₹ 2,006.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 60°, Long Type, ALD Coating

  IWATA TOOL

  Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering.
  
  [Features]
  · The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
  · Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 4	60	Chamfering/Horizontal	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 4,800.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momimen Nano

  FUJIGEN

  [Features]
  · Smallest class in the industry. A screw-on type, the smallest class in the industry thanks to its industry-smallest class tip (underneck diameter of φ6 mm).
  · Interference of vise, clamp and the like can be avoided.
  · Capable of machining previously unreachable locations.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6 ～ 7.4	90 ～ 120	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,959.71
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	DIXI	DIXI	EIKOSHA	EIKOSHA	EIKOSHA	EIKOSHA	EIKOSHA	EIKOSHA	SANKO MFG	SANKO MFG	SANKO MFG	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	FUJIGEN
Product Series	2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC	2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC	2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC	3-flute Chamfering Cutter (negative type) HSCT-N	3-flute Chamfering Cutter (positive type) HSCT-P	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	Carbide NC Center Drill 1106	Carbide NC Center Drill 1107	Carbide Centering Tool, Short Type	Carbide Centering Tool, Short Type (Taper Shank)	Carbide Centering Tool, Long Type (Taper Shank)	New Chamfering Cutter	Centering tool	Centering tool (taper shank)	SAGCCC AS Coated Carbide Center for Chamfering	GCCC, Carbide Center for Chamfering	CC, Center for Chamfering	HSS SP Center 120°	HSS, SP Center, 120° TiCN Coating	HSS SP Center 60°	HSS, SP Center, 60° TiCN Coating	HSS, SP Center, 90°	HSS, SP Center, 90° TiCN Coating	HSS SP Center Sharp 60°	HSS SP Center Sharp 60° DLC Coating	HSS SP Center Sharp 90°	HSS SP Center Sharp 90° DLC Coating	Toglon Sharp SP 60° Carbide	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide	Toglon Sharp SP 90° Carbide DLC Coating	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Toglon Sharp SP 60° ALD Coating	Toglon Miniature Hard SP 90° ALT Coating	Carbide SP Center 120°	Carbide SP Center, 120°, ALD Coating	Carbide SP Center, 120°, Long Type, ALD Coating	Carbide SP Center 60°	Carbide SP Center 60° ALD Coating	Carbide SP Center 90°	Carbide SP Center, 60°, Long Type, ALD Coating	Momimen Nano
CAD
From	₹ 9,281.02	₹ 10,124.84	₹ 10,025.71	₹ 8,178.69	₹ 8,228.25	₹ 8,754.64	₹ 8,754.64	₹ 4,961.47	₹ 3,746.84	₹ 3,697.27	₹ 14,205.98	₹ 15,079.04	₹ 21,290.78	₹ 7,395.99	₹ 9,387.49	₹ 11,266.24	₹ 8,059.49	₹ 6,528.56	₹ 3,821.64	₹ 608.05	₹ 950.95	₹ 671.00	₹ 1,012.55	₹ 671.00	₹ 1,012.55	₹ 701.82	₹ 1,757.25	₹ 701.82	₹ 1,757.25	₹ 5,488.80	₹ 8,641.75	₹ 4,425.33	₹ 7,579.60	₹ 5,455.33	₹ 8,641.75	₹ 7,579.60	₹ 6,836.24	₹ 1,293.82	₹ 1,943.44	₹ 4,282.02	₹ 2,006.38	₹ 2,626.53	₹ 2,006.38	₹ 4,800.36	₹ 9,959.71
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	High-speed steel	Cobalt HSS	Cobalt HSS	Carbide	Carbide	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-
Tool Diameter (D)(mm)	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	1 ～ 2	1 ～ 2	1 ～ 2	1 ～ 2	-	3 ～ 20	3 ～ 20	12 ～ 50	12 ～ 40	12 ～ 40	6	10 ～ 32	10 ～ 32	3 ～ 20	3 ～ 20	6 ～ 32	0.9 ～ 25	0.9 ～ 25	0.3 ～ 9	0.3 ～ 9	0.3 ～ 9	0.3 ～ 9	0.3 ～ 2	0.3 ～ 2	0.3 ～ 2	0.3 ～ 2	1.2 ～ 16	2 ～ 16	1.2 ～ 16	1.2 ～ 16	3 ～ 12	3 ～ 12	0.6 ～ 4	0.1 ～ 1.5	0.4 ～ 16	0.4 ～ 16	2 ～ 12	0.03 ～ 6	0.1 ～ 6	0.03 ～ 6	0.5 ～ 4	6 ～ 7.4
Tip angle (θ)	90	90	90	90	90	90	90	-	90	90 ～ 120	90 ～ 118	90 ～ 118	90 ～ 118	60	90 ～ 118	90 ～ 118	-	-	-	120	120	60	60	90	90	60	60	90	90	60	60	90	90	90	90	60	90	120	120	120	60	60	90	60	90 ～ 120
Application	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal
work material	Aluminum[◎] / Copper[◎] / Resin[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Quenched and tempered steel[○] / high hardness steel[○]	Quenched and tempered steel[○] / high hardness steel[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-	-	-	-	-	-	-	-	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	NA	-	-	-	-	-	-	-	-	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	NA	Available	NA	NA	NA	NA	NA	Available	NA	NA	-	-	-	-	-	-	Available	NA	NA	NA	Available	NA	Available	NA	Available	NA	Available	NA	Available	NA	Available	NA	Available	NA	Available	Available	Available	NA	Available	Available	NA	Available	NA	Available	NA
Coating Type	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	-	-	-	-	-	-	-	-	TiAlN	Non-Coated	Non-Coated	-	TiCN	-	TiCN	-	TiCN	-	DLC	-	DLC	-	DLC	-	DLC	-	DLC	Other	ALT	-	Other	Other	-	Other	-	Other	Non-Coated
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...