Chamfering / Centering Tools（Application：Hole Chamfer）

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, TiN Coating 90°

  ILIX

  Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	TiN	-

  From: ₹ 2,974.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 11,203.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Non-Coated
  • Aluminum
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Hole Chamfer	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 3,909.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Countersinks 90°and 60°, Drilling Machine Use_CS-QM

  YAMAWA MFG

  Countersink that can perform chamfering of round holes, mounting surfaces of small screws and bolts, and grooves.
  [Features]
  · It has multiple flutes and is ideal for use with drilling machines.
  · Angles are available in 90° and 60°.
  [Applications]
  · Capable of highly precise and stable chamfering of round holes and mounting surfaces of small screws and bolts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6 ～ 12	60 ～ 90	Hole Chamfer	-	Single blade	NA	NA	-	-

  From: ₹ 998.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WATERMILLS ® 1-Flute Countersink WMSFC 90° for Drill, Chamfer, for Veneer

  WATERMILLS

  [Materials]·5% cobalt high-speed steel.
  Applications: hole chamfering
  tip angle (θ): 90°
  Coating type: uncoated
  Overall length (mm): 78 (±)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	25.0(+0.3)	90°	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: ₹ 4,800.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outside Chamfering Cutter (Nice Guy) NGC (SKH51)

  TAIYO-TOOL

  [Applications]
  · Hole chamfer
  [Single Blade / Double Blade]
  · Single blade
  [Tool Grade]
  · High-speed steel
  [Coating Y/N] N
  [Coating Type] Non-Coated

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	25 ～ 55	-	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: ₹ 15,435.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

  THE CUT

  [Features]
  · No need to turn over the work material. (Also removes through-hole burrs)
  · Both sides can be chamfered with the one cutter tool.
  · Ultra-fine particle carbide with TiAlN coating for a longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2.8 ～ 12	90°	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: ₹ 14,520.76
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spot Drill / Corner Radius Cutter for 90°

  Nine9

  Carbide insert type NC spot drill. High efficiency! Low cost! Ideal for CNC lathes and machining centers. Inserts that can process corner radii can also be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16 ～ 20	90	Hole Chamfer	-	Single blade	NA	NA	Non-Coated	-

  From: ₹ 12,668.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.
  · Finest surface finish without any chatter marks.
  [Applications]
  · Work materials: Aluminum, stainless steel, iron, resin, copper.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: ₹ 2,525.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-away Tip for C-Cutter Mini

  BIG DAISHOWA SEIKI

  Throw-away insert for "C-Cutter Mini" high performance chamfering cutters that achieve ultra-high feed rates and a compact size.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	Available	Other	0.2

  From: ₹ 1,577.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Long Shank High Helix Center Drills-Type A 60°_CE-SL

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 12	60°	Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: ₹ 2,846.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Milling CF

  EIKOSHA

  [Features]
  · It is for center hole finish and chamfer finish.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6 ～ 100	60 ～ 120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	NA	-	-

  From: ₹ 2,015.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Tool CFT (SKH57)

  TAIYO-TOOL

  [Applications]
  · Hole chamfer
  [Single Blade / Double Blade]
  · Single blade
  [Tool Grade]
  · High-speed steel
  [Coating Y/N] N
  [Coating Type] Non-Coated
  [Flute No.] 1-Flute

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 20	60 ～ 90	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: ₹ 9,938.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model

  MISUMI

  A single tool with high efficiency that's capable of all centering, chamfering and V grooving

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 2	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	Available	Available	TiAlN	-

  From: ₹ 2,464.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center chamfer mill

  FUKUDA

  A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	4 ～ 40	60 ～ 120	Hole Chamfer	general steel[○] / Cast Iron[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: ₹ 4,475.55
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spot Drill for 90°

  Nine9

  Carbide insert type NC spot drill. High efficiency! Low cost! For CNC lathes, CNC compound lathes, and machining centers

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6	90	Hole Chamfer	-	Single blade	NA	NA	Non-Coated	-

  From: ₹ 9,730.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Milling (Tapered Shank) CFT

  EIKOSHA

  [Features]
  · It is for center hole finish and chamfer finish.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	40 ～ 100	60 ～ 90	Hole Chamfer	general steel[○] / Aluminum[○] / Copper[○]	-	-	NA	-	-

  From: ₹ 22,322.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Chamfer Cutter CC

  EIKOSHA

  [Features]
  · Capable of centering, chamfering and side machining, as well as drilling and V grooving depending on the tip angle.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	4 ～ 35	30 ～ 120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	NA	-	-

  From: ₹ 5,465.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

  MISUMI

  Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 20	90 ～ 120	Hole Chamfer	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available / NA	TiN / Non-Coated	-

  From: ₹ 407.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated High-Speed Steel Countersink / 3-Flute / 90°

  MISUMI

  Necessities in hole chamfering and deburring are available at low prices

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: ₹ 1,472.87
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SV Spiral Chamfer Cutter

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	Single blade	NA	NA	-	-

  From: ₹ 6,426.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	-	Available	TiAlN	-

  From: ₹ 4,202.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Spot Drill

  Nine9

  Insert for NC spot drill holder.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1–6 ～ 3 to 15	60 ～ 90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiAlN / TiN / DLC	-

  From: ₹ 3,043.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90゜, Long Type, TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.5 ～ 5	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: ₹ 2,626.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute 90° 327

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	5 ～ 31	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: ₹ 2,215.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Starting Drills for Chamfering (90°), Coated_NC-SD-V

  YAMAWA MFG

  A drill for chamfering the end face after drilling with a drill.
  [Features]
  · Adopts cobalt high-speed steel with excellent wear resistance.
  [Applications]
  · By using NC-SD V, larger than the diameter after hole drilling, cleanly-finished chamfered surfaces can be achieved.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90°	Hole Chamfer	-	Single blade	NA	Available	TiN	-

  From: ₹ 1,548.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 60°, Coated_CE-S-V

  YAMAWA MFG

  Centering hole drill with a coating suitable for soft materials and relatively viscous materials thanks to its groove with high torsion.
  [Features]
  · Since it has a coating, stable processing is possible even if the cutting speed is increased, and the tool life is improved.
  [Applications]
  · Used for A-type 60° center drilling.
  · Guidelines for machining requirements are, carbon steel 15-30, steel alloy 10-25, stainless steel 5-12, and cast iron: 8-15 m/min.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	60°	Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: ₹ 1,833.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Starting Drill GSS

  EIKOSHA

  Drill for positioning and chamfering.
  [Features]
  · TiN coating achieves longer life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90 ～ 135	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	Available	TiN	-

  From: ₹ 1,596.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Corner R Cutter (Half) MCRC

  EIKOSHA

  [Features]
  · It is a round chamfering cutter whose tip diameter is unified at φ2.
  

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 19	-	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	NA	-	0.5 ～ 8

  From: ₹ 8,186.33
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Double Sided Chamfering Cutter 45° DFC

  THE CUT

  [Features]
  · Capable of V-grooving both front and back surfaces as well as the side surfaces.
  · Capable of chamfering up to C2.8 for front chamfering.
  · The use of a dedicated insert (4 cutting edges) delivers high precision machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	11 ～ 20	-	Hole Chamfer	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	-	-	-

  From: ₹ 19,647.96
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  ·Ideal for chamfering and V-groove
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,132.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TS	-

  From: ₹ 4,456.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack

  MISUMI

  Carbide spot drill that contributes to higher efficiency in chamfering

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 1,998.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide NC Spot Drill

  MISUMI

  The non-coated design allows the edge of the tip to stand, achieving the high cut-off performance.

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 2	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	NA	-	-

  From: ₹ 3,648.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack

  MISUMI

  A carbide countersink that's essential in chamfering and deburring

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	Available	TiAlN	-

  From: ₹ 4,580.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	NA	Available	TiN	-

  From: ₹ 1,437.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-UCS Hole Chamfering, Countersink, V Coating

  OSG

  High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	Available	Available	Other	-

  From: ₹ 2,801.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chatterless chamfer milling machine

  FUKUDA

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
  
  [Features]
  · Chamfering.
  · Drilling machines, milling machines, machining centers.
  · Horizontal Milling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	60 ～ 120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: ₹ 2,351.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: ₹ 1,012.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 90°, ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 2,626.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°, Long Type ALD Coating

  IWATA TOOL

  [Features]
  · The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
  · Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 4	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: ₹ 4,800.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink (Titanium Coating)【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.
  · Its surface has high hardness due to the surface titanium coating and has improved heat and wear resistance as well as sharpness compared to cobalt high-strength steel.
  · It easily expels chips because it uses 3 flute edges, providing a beautiful finish.
  [Applications]
  · Work materials: Iron, casting, stainless steel.
  · Chamfering.
  · Deburring.
  · For countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	Available	TiN	-

  From: ₹ 2,460.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Cutter Mini, Tap and Bolt Hole Type

  BIG DAISHOWA SEIKI

  [Features]
  · Tap pilot hole and bolt hole front and back chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.
  · Ultra-high feed machining achieves dramatic reductions in chamfering time.
  · Supports a wide range of machining, such as front chamfering, back chamfering, and face milling.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	45°	Hole Chamfer	-	-	NA	-	-	-

  From: ₹ 17,071.38
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Boy

  BIG DAISHOWA SEIKI

  [Features]
  ·Accurate positioning of drilled holes and chamfering are performed at once.
  ·High-precision indexable bit with excellent sharpness.
  ·The cutting edge can be replaced, eliminating the need for regrinding.
  ·It is a long shank type with little work interference.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90 ～ 120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	NA	Available	TiN	-

  From: ₹ 10,361.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Centering end mill

  NIKKENKOSAKU

  [Features]
  Single-edged end mill.
  [Applications]
  Suitable for positioning, chamfering, etc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	16	90	Hole Chamfer	-	Single blade	NA	-	-	-

  From: ₹ 14,115.33
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	ILIX	MAKOTOLOY	MISUMI	YAMAWA MFG	WATERMILLS	TAIYO-TOOL	THE CUT	Nine9	TRUSCO NAKAYAMA	BIG DAISHOWA SEIKI	YAMAWA MFG	EIKOSHA	TAIYO-TOOL	MISUMI	FUKUDA	Nine9	EIKOSHA	EIKOSHA	MISUMI	MISUMI	UNION TOOL	DIXI	Nine9	IWATA TOOL	GUHRING	YAMAWA MFG	YAMAWA MFG	EIKOSHA	EIKOSHA	THE CUT	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	FUKUDA	IWATA TOOL	IWATA TOOL	IWATA TOOL	TRUSCO NAKAYAMA	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	NIKKENKOSAKU
Product Series	Straight Shank, Countersink, HSS, TiN Coating 90°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	Countersinks 90°and 60°, Drilling Machine Use_CS-QM	WATERMILLS ® 1-Flute Countersink WMSFC 90° for Drill, Chamfer, for Veneer	Outside Chamfering Cutter (Nice Guy) NGC (SKH51)	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	NC Spot Drill / Corner Radius Cutter for 90°	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	Throw-away Tip for C-Cutter Mini	Long Shank High Helix Center Drills-Type A 60°_CE-SL	Center Milling CF	Chamfering Tool CFT (SKH57)	TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model	Center chamfer mill	NC Spot Drill for 90°	Center Milling (Tapered Shank) CFT	Center Chamfer Cutter CC	TiN Coated / Non-Coated High-Speed Steel NC Spot Drill	TiN Coated High-Speed Steel Countersink / 3-Flute / 90°	SV Spiral Chamfer Cutter	Carbide Solid Chamfering Endmill 3-Flute	Insert for Spot Drill	HSS, SP Center, 90゜, Long Type, TiCN Coating	Straight Shank, Countersink 3-Flute 90° 327	NC Starting Drills for Chamfering (90°), Coated_NC-SD-V	High Helix Center Drills-Type A 60°, Coated_CE-S-V	Starting Drill GSS	Mini Corner R Cutter (Half) MCRC	Double Sided Chamfering Cutter 45° DFC	TS coated carbide chamfer, V grooving end mill, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack	Carbide NC Spot Drill	TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack	Leading Drill TIN-NC-LDS	V-UCS Hole Chamfering, Countersink, V Coating	Chatterless chamfer milling machine	HSS, SP Center, 90° TiCN Coating	Carbide SP Center, 90°, ALD Coating	Carbide SP Center 90°, Long Type ALD Coating	Counter Sink (Titanium Coating)【1-6 Pieces Per Package】	C-Cutter Mini, Tap and Bolt Hole Type	Center Boy	Centering end mill
CAD			2D / 3D																2D / 3D	2D / 3D											2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	₹ 2,974.38	₹ 11,203.09	₹ 3,909.85	₹ 998.93	₹ 4,800.75	₹ 15,435.15	₹ 14,520.76	₹ 12,668.75	₹ 2,525.09	₹ 1,577.00	₹ 2,846.09	₹ 2,015.18	₹ 9,938.27	₹ 2,464.20	₹ 4,475.55	₹ 9,730.24	₹ 22,322.80	₹ 5,465.36	₹ 407.00	₹ 1,472.87	₹ 6,426.76	₹ 4,202.24	₹ 3,043.65	₹ 2,626.53	₹ 2,215.33	₹ 1,548.11	₹ 1,833.78	₹ 1,596.36	₹ 8,186.33	₹ 19,647.96	₹ 4,132.20	₹ 4,456.00	₹ 1,998.00	₹ 3,648.20	₹ 4,580.60	₹ 1,437.53	₹ 2,801.02	₹ 2,351.53	₹ 1,012.55	₹ 2,626.53	₹ 4,800.36	₹ 2,460.24	₹ 17,071.38	₹ 10,361.02	₹ 14,115.33
Days to Ship	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	8 Day(s) or more
Specifications			Non-Coated Aluminum 2 Flutes																												TS General Steel 2 Flutes	TS SUS 2 Flutes
Tool Material Type	High-speed steel	Carbide	Carbide	High-speed steel	Cobalt HSS	High-speed steel	Carbide	-	High-speed steel	-	High-speed steel	High-speed steel	High-speed steel	Carbide	Cobalt HSS	Carbide	High-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	Cobalt HSS	Cobalt HSS	-	Carbide	Carbide	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	Carbide	Carbide	Cobalt HSS	-	High-speed steel	High-speed steel
Tool Diameter (D)(mm)	4.3 ～ 37	1 ～ 20	3 ～ 12	6 ～ 12	25.0(+0.3)	25 ～ 55	2.8 ～ 12	16 ～ 20	-	-	4 ～ 12	6 ～ 100	10 ～ 20	0.5 ～ 2	4 ～ 40	6	40 ～ 100	4 ～ 35	2 ～ 20	6.3 ～ 20.5	0.8 ～ 1	2 ～ 12	1–6 ～ 3 to 15	0.5 ～ 5	5 ～ 31	3 ～ 25	4 ～ 18	3 ～ 25	3 ～ 19	11 ～ 20	3 ～ 16	3 ～ 12	2 ～ 12	0.3 ～ 2	6.3 ～ 20.5	3 ～ 25	4.3 ～ 37	-	0.3 ～ 9	0.1 ～ 6	0.5 ～ 4	-	-	-	16
Tip angle (θ)	90	90	90	60 ～ 90	90°	-	90°	90	90	-	60°	60 ～ 120	60 ～ 90	60 ～ 120	60 ～ 120	90	60 ～ 90	30 ～ 120	90 ～ 120	-	90	90	60 ～ 90	90	90	90°	60°	90 ～ 135	-	-	60 ～ 120	90	90 ～ 120	-	-	60 ～ 120	60 ～ 120	60 ～ 120	90	90	90	90	45°	90 ～ 120	90
Application	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer
work material	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	-	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[○] / Cast Iron[○] / Resin[○]	-	general steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Double-edged	-	Single blade	Single blade	Single blade	Single blade	-	-	Single blade	Single blade	Single blade	-	Single blade	Single blade / Double-edged	Single blade	Single blade	Double-edged	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade	-	-	Single blade
Peripheral Blade Y/N	Available	-	NA	NA	-	-	-	NA	NA	-	NA	-	-	Available	Available	NA	-	-	NA	NA	NA	-	NA	NA	-	NA	NA	-	-	-	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	Available	Available	NA	NA	NA	NA	Available	NA	Available	Available	NA	NA	NA	Available	NA	NA	NA	NA	Available / NA	Available	NA	Available	Available	Available	Available	Available	Available	Available	NA	-	Available	Available	Available	NA	Available	Available	Available	NA	Available	Available	Available	Available	-	Available	-
Coating Type	TiN	TiAlN	-	-	Non-Coated	Non-Coated	TiAlN	Non-Coated	TiN	Other	-	-	Non-Coated	TiAlN	Non-Coated	Non-Coated	-	-	TiN / Non-Coated	TiN	-	TiAlN	TiAlN / TiN / DLC	TiCN	TiN	TiN	TiN	TiN	-	-	TS	TS	TiAlN	-	TiAlN	TiN	Other	Non-Coated	TiCN	Other	Other	TiN	-	TiN	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	0.2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 8	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...