(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
70 items
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.
·Supply sufficient cutting fluid.
·Use a chuck with high precision.
·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 13.05 | - | Quenched and tempered steel[○] | End Mill Shank / straight shank | NA | Straight | NA | - | - | - | - |
From: ₹ 2,959.07 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 12.1 | 3 ~ 45 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: ₹ 1,938.65 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 10.009 | 5 ~ 40 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: ₹ 4,411.93 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
Cutting capacity for quenched hardness around 60 HRC, thanks to purple coating for high-hardness steel and right-lead blade shape. Shank diameter is endmill shank type.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12.1 | 15 ~ 65 | Quenched and tempered steel[◎] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: ₹ 5,878.56 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]
·High-speed cutting greatly improves efficiency compared to high-speed steel reamers
·High-speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10 | 25 ~ 40 | Quenched and tempered steel[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: ₹ 4,646.53 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 5.995 | 0.5 ~ 34 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 14.05 | 20 ~ 85 | Quenched and tempered steel[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: ₹ 2,242.11 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer for Stainless Steel CSUSR-A
EIKOSHA
[Features]
· Ideal shape for stainless steel and other difficult-to-cut materials.
· Heat-Resistant Coating
· Abrasion Resistant Material
· Right torsion
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12.05 | 6 ~ 45 | Quenched and tempered steel[○] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: ₹ 6,223.00 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 15.5 | 8 ~ 45 | Quenched and tempered steel[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: ₹ 6,418.35 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer with End Blade Edge KHR-4
KYOWA SEIKO
[Applications]It can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, aluminum, titanium, copper, and resin. [Features]Fine particle alloy K10 with well-balanced hardness and transverse rupture strength is used.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6.03 | - | Quenched and tempered steel[◎] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: ₹ 7,157.69 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Coated Solid Spiral Reamer CSPR-C
EIKOSHA
Carbide spiral reamer with high versatility and excellent wear resistance.
[Features]
· Features TiCN coating that prevents welding and improves roughness of the finishing surface.
· Uses a twisted blade with excellent chip discharge performance.
[Applications]
· Ideal for machining a wide range of work materials from nonferrous metal to carbon steel.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 12.05 | 15 ~ 45 | Quenched and tempered steel[○] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: ₹ 4,859.49 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 14.1 | 20 ~ 85 | Quenched and tempered steel[○] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: ₹ 2,534.11 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
High-speed steel high-torsion spiral reamer.
[Features]
· Excellent in surface roughness and cutting powder processing thanks to the adoption of 60° torsion.
· Reduces cutting resistance.
[Applications]
· Convenient for general purpose finishing.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.1 ~ 16.05 | 15 ~ 45 | Quenched and tempered steel[○] | End Mill Shank / straight shank | NA | Helical | NA | - | - | - | - |
From: ₹ 2,491.60 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSR Carbide Short Reamer (Straight Shank)
OKAZAKI SEIKO
Solid type. Boasts life ten times longer than HSS reamer. Corresponds to a wide range of workpieces from cast iron to steel. Capable of high accuracy drilling. Reduces machining time.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 12 ~ 45 | Quenched and tempered steel[○] | straight shank | NA | Straight | NA | - | - | - | - |
From: ₹ 2,257.24 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide High Helical Reamer CHHR
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2 ~ 14 | 10 ~ 29 | Quenched and tempered steel[○] | straight shank | NA | Helical | NA | - | - | - | - |
From: ₹ 7,658.55 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DAIICHITOOL
[Features]
· Chips are discharged toward the back instead of being accumulated at the bottom.
· The depth is freely controlled by adjusting the shank.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 13 | 20 ~ 30 | Quenched and tempered steel[○] | straight shank | - | Spiral | - | - | - | - | - |
From: ₹ 12,560.80 |
---|
Days to Ship: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Long Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
·Long type allows reaming of deep areas
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 5.99 | 0.5 ~ 34 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]
·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers
·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 10 | 12 ~ 40 | Quenched and tempered steel[○/◎] | End Mill Shank | Available ~ NA | Straight | NA | - | - | - | - |
From: ₹ 1,974.89 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer FP Platinum Reamer
FPTOOLS
[Features]
· Reamer shape ideal for high-speed machining: Achieves high-precision and high-speed machining thanks to its high torsion, highly rigid blade shape and eccentric chamfer blade.
· Special coating: Features a special coating with an excellent oxidation resistance temperature and friction coefficient. This coating helps improve the tool service life and allows smooth cutting chip processing.
· High-precision end mill shank: Shank tolerance of h5 is adopted.
· Effective for machining stainless steel: General-purpose F.P. Platinum Reamer can even be used for high-speed machining of stainless steel.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 12.005 | 15 ~ 40 | Quenched and tempered steel[○] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: ₹ 7,235.38 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer CE Series (formerly SH Series)
FPTOOLS
Complete blind hole drilling is possible. Newly developed special blade coating. End mill shank is adopted.
* Product name was changed from SH to CE. Although there is no change in the standards and price, the label of the delivered product may be that of the former SH series.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 14.05 | 5 ~ 30 | Quenched and tempered steel[○] | End Mill Shank | Available | Spiral | Available | - | - | 1 ~ 2.5 | - |
From: ₹ 8,735.49 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]
· Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and short blade length.
· As the bite length is short, it is capable of processing blind holes.
· The cobalt HSS has been coated with a newly developed special coating featuring coating hardness of 3,700 Hv, providing excellent abrasion resistance.
· End mill shank is adopted.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12.095 | 12 ~ 30 | Quenched and tempered steel[○] | End Mill Shank | Available | Spiral | NA | - | - | - | - |
From: ₹ 4,106.55 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 26 ~ 31 | Quenched and tempered steel[○] | straight shank | NA | Straight | NA | - | - | - | - |
From: ₹ 2,522.44 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 15.995 | 0.5 ~ 48 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Spiral Reamer, High-Precision Tolerance Model
MISUMI
[Features]
·Achieves high-precision hole finishing by narrowing the cutting diameter tolerance width
·High-speed cutting greatly improves efficiency compared to high-speed steel reamers
·The long lifespan allows high-precision machining to be maintained for a long time.
·Even higher speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 13 | 10 ~ 44 | Quenched and tempered steel[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: ₹ 2,057.20 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCR Carbide Chucking Reamer (Straight Shank)
OKAZAKI SEIKO
Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | Quenched and tempered steel[○] | straight shank | NA | Straight | NA | - | - | - | - |
From: ₹ 11,461.55 |
---|
Days to Ship: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CER Reamer with Carbide End Flutes
OKAZAKI SEIKO
A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 20 ~ 31 | Quenched and tempered steel[○] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: ₹ 6,827.24 |
---|
Days to Ship: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CERM Reamer with Carbide Teeth (Hundredths Range)
OKAZAKI SEIKO
A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 12.05 | 20 ~ 31 | Quenched and tempered steel[○] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: ₹ 8,615.33 |
---|
Days to Ship: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Reamer with End Blades ERR-TiN
EIKOSHA
[Features]
· A reamer exclusively for blind holes.
· TiN coating is added to powdered HSS for a long service life.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 50 | 16 ~ 30 | Quenched and tempered steel[○] | End Mill Shank | Available | Spiral | Available | - | - | - | - |
From: ₹ 7,894.47 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Powerful Reamer (Straight Shank) BCPR
OKAZAKI SEIKO
Flat tip type with straight shank specification. Torsion angle 45°
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | Quenched and tempered steel[○] | straight shank | NA | Helical | NA | - | - | - | - |
From: ₹ 12,587.98 |
---|
Days to Ship: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Reamer Shank-Through Coolant CSGR-A
EIKOSHA
[Features]
· The cutting speed is approximately 2.5 times that of conventional coating reamers.
· The pinpoint lubrication improves the weld resistance and machined surface roughness
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.97 ~ 20.03 | 19 ~ 25 | Quenched and tempered steel[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: ₹ 16,845.71 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer with End Blade CERFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type
・ Reamer for complete blind holes, capable of cleanly machining bottom surfaces.
・ Adopts an end mill shank
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 2.96 | 26 ~ 31 | Quenched and tempered steel[◎] | End Mill Shank | Available | Spiral | Available | - | - | - | - |
From: ₹ 11,130.71 |
---|
Days to Ship: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer R Series with Oil Hole CR-H
FPTOOLS
[Features]
· By adding an oil hole, the influence of heat during machining can be suppressed and the abrasion resistance is improved.
· The short product length improves tool rigidity and enables even higher-precision machining.
· As with the R Series, it is capable of machining everything from difficult-to-cut materials such as stainless steel to high hardness steel.
· Blade diameter tolerance of +0.005/0 is adopted.
· By injecting cutting oil from the oil hole provided in the blade groove and applying it directly to the blade tip, the influence of heat during machining can be suppressed.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
4.97 ~ 10.03 | 20 ~ 30 | Quenched and tempered steel[◎] | - | Available | Spiral | NA | - | - | - | - |
From: ₹ 9,596.73 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Even higher speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10.01 | 20 ~ 30 | Quenched and tempered steel[○] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: ₹ 5,890.20 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10.01 | 27 ~ 40 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
From: ₹ 3,765.93 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Regular Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 15.99 | 0.5 ~ 48 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 5.9 | 3 ~ 10 | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding.
By using it before finishing the reamer, the bend of the hole can be modified.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1.8 ~ 5 | - | Quenched and tempered steel[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]
·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy
·Drilling is possible under cutting conditions of 60 m/min or more
·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling
·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming
·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement
·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2 ~ 10 | 12 ~ 52 | Quenched and tempered steel[○] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: ₹ 6,701.87 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 12.05 | 12 ~ 45 | Quenched and tempered steel[◎] | End Mill Shank | Available | Straight | NA | - | - | - | - |
From: ₹ 4,681.35 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Reamer with Carbide Oil Hole for Stop Holes CSOER
EIKOSHA
Right torsion reamer for blind holes with oil hole and bottom blade
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 16 | 16 ~ 30 | Quenched and tempered steel[○] | straight shank | NA | Spiral | Available | - | - | - | - |
From: ₹ 10,614.29 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.
[Features]
· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.
· φ0.2-3 (0.2-3 mm diameter) types are available.
[Applications]
· Ideal for finish machining of ultra-small diameter holes.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 3 | 3 ~ 25 | Quenched and tempered steel[○] | straight shank | NA | Straight | NA | - | - | - | - |
From: ₹ 3,257.22 |
---|
Days to Ship: 5 Day(s) or more |
Brand |
---|
Product Series |
From |
Days to Ship |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | OSG | FPTOOLS | FPTOOLS | FPTOOLS | MISUMI | MISUMI | FPTOOLS | EIKOSHA | FPTOOLS | KYOWA SEIKO | EIKOSHA | FPTOOLS | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | DAIICHITOOL | MISUMI | MISUMI | MISUMI | FPTOOLS | FPTOOLS | FPTOOLS | OKAZAKI SEIKO | MISUMI | MISUMI | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | OKAZAKI SEIKO | FPTOOLS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | EIKOSHA |
Product Series | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | ||||||||||||||||||||||||||||||||||||||
From | ₹ 2,959.07 | ₹ 1,938.65 | ₹ 4,411.93 | ₹ 5,878.56 | ₹ 4,646.53 | ₹ 2,242.11 | ₹ 6,223.00 | ₹ 6,418.35 | ₹ 7,157.69 | ₹ 4,859.49 | ₹ 2,534.11 | ₹ 2,491.60 | ₹ 2,257.24 | ₹ 7,658.55 | ₹ 12,560.80 | ₹ 1,974.89 | ₹ 7,235.38 | ₹ 8,735.49 | ₹ 4,106.55 | ₹ 2,522.44 | ₹ 2,057.20 | ₹ 11,461.55 | ₹ 6,827.24 | ₹ 8,615.33 | ₹ 7,894.47 | ₹ 12,587.98 | ₹ 16,845.71 | ₹ 11,130.71 | ₹ 9,596.73 | ₹ 5,890.20 | ₹ 3,765.93 | ₹ 6,701.87 | ₹ 4,681.35 | ₹ 10,614.29 | ₹ 3,257.22 | ||||||||||
Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
Tool Diameter(mm) | 0.3 ~ 13.05 | 0.2 ~ 12.1 | 0.5 ~ 10.009 | 1 ~ 12.1 | 3 ~ 10 | 0.3 ~ 5.995 | 1 ~ 14.05 | 0.5 ~ 12.05 | 1 ~ 15.5 | 1 ~ 6.03 | 0.8 ~ 12.05 | 1 ~ 14.1 | 2.1 ~ 16.05 | 1 ~ 20 | 2 ~ 14 | 3 ~ 13 | 0.4 ~ 5.995 | 0.3 ~ 5.99 | 1 ~ 10 | 2.95 ~ 12.005 | 1 ~ 14.05 | 1 ~ 12.095 | 3 ~ 12 | 0.3 ~ 15.995 | 1 ~ 13 | 12.5 ~ 30 | 3 ~ 12 | 2.95 ~ 12.05 | 2.95 ~ 50 | 12.5 ~ 30 | 2.97 ~ 20.03 | 2.95 ~ 2.96 | 4.97 ~ 10.03 | 0.4 ~ 15.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.5 ~ 5.9 | 1.8 ~ 5 | 2 ~ 10 | 0.8 ~ 12.05 | 2.95 ~ 16 | 0.2 ~ 3 |
Groove Length(mm) | - | 3 ~ 45 | 5 ~ 40 | 15 ~ 65 | 25 ~ 40 | 0.5 ~ 34 | 20 ~ 85 | 6 ~ 45 | 8 ~ 45 | - | 15 ~ 45 | 20 ~ 85 | 15 ~ 45 | 12 ~ 45 | 10 ~ 29 | 20 ~ 30 | 0.5 ~ 34 | 0.5 ~ 34 | 12 ~ 40 | 15 ~ 40 | 5 ~ 30 | 12 ~ 30 | 26 ~ 31 | 0.5 ~ 48 | 10 ~ 44 | 36 ~ 46 | 20 ~ 31 | 20 ~ 31 | 16 ~ 30 | 36 ~ 46 | 19 ~ 25 | 26 ~ 31 | 20 ~ 30 | 0.5 ~ 48 | 0.5 ~ 48 | 0.5 ~ 34 | 20 ~ 30 | 27 ~ 40 | 0.5 ~ 48 | 3 ~ 10 | - | 12 ~ 52 | 12 ~ 45 | 16 ~ 30 | 3 ~ 25 |
work material | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○/◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] |
Shank Type | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | - | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank |
Coating Y/N | NA | NA | NA | Available | NA | NA | Available | Available | NA | NA | Available | Available | NA | NA | NA | - | NA | NA | Available ~ NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA |
Groove Shape | Straight | Straight | Straight | Spiral | Spiral | Straight | Straight | Spiral | Spiral | Spiral | Spiral | Spiral | Helical | Straight | Helical | Spiral | Straight | Straight | Straight | Spiral | Spiral | Spiral | Straight | Straight | Spiral | Straight | Spiral | Spiral | Spiral | Helical | Straight | Spiral | Spiral | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Straight |
Base Blade Y/N | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | NA | NA | NA | NA | NA | - | Available | NA | NA | NA | Available | NA | NA | Available | NA | NA | Available | Available | Available | NA | NA | Available | NA | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | Available | NA |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy