Screw-Hole-Related Tools（work material：Quenched and tempered steel (25 to 35 HRC)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

  MISUMI

  [Features]
  ·Versatile tap that can handle all work materials from general steel, heat-treated steel to stainless steel
  ·Efficient cutting chip discharge by short thread shape and special flute shape

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.4 ～ 1.75	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	40 ～ 82

  From: ₹ 559.44
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

  OSG

  As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2UN ～ M12	Meter / unified	Quenched and tempered steel (25 to 35 HRC)[○]	0.25 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	30 ～ 82

  From: ₹ 1,945.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Series High-Speed Steel Spiral Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3	Cobalt HSS	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	40 ～ 120

  From: ₹ 512.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless Tap (X Performer)_S-XPF

  OSG

  There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
  * M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M45	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.2 ～ 4.5	Powder high-speed steel / Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiCN	Available	30 ～ 220

  From: ₹ 2,505.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Straight Flutes Tap_CPM-HT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M48	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.5 ～ 5	Powder high-speed steel	Hand Tap	For through hole / For blind hole	2P ～ 5P	Non-Coated	NA	46 ～ 185

  From: ₹ 1,211.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M30	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 3.5	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	100 ～ 200

  From: ₹ 2,930.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps for Left Hand Threads_HT-LH

  YAMAWA MFG

  It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.5 ～ M8	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.45 ～ 0.75	High-speed steel	Hand Tap	For through hole / For blind hole	5P	-	NA	46 ～ 70

  From: ₹ 1,434.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]
  ··Carbide thread mill cutter capable of high-speed stable machining
  ·Can be used for both blind holes and through holes
  ·
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1.75	Carbide	Thread cutter	For through hole / For blind hole	-	For High Hardness (Silicon Group)	Available	48 ～ 74

  From: ₹ 13,313.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap TiN coated_TIN-HT

  OSG

  Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	TiN	Available	40 ～ 120

  From: ₹ 1,687.98
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plus Series Spiral Pointed Taps_+PO

  YAMAWA MFG

  A point tap suitable for medium- to high-speed machining with machining centers, etc.
  [Features]
  · Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
  [Applications]
  · Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M6	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1	High-speed steel	Point tap	For through hole	5P	-	NA	46 ～ 62

  From: ₹ 771.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

  MISUMI

  Threading cutters that enable the high-speed stable processing are available at special prices

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	57 ～ 115

  From: ₹ 7,195.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap_CPM-SFT

  OSG

  The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M48	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.3 ～ 5	Powder high-speed steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	34 ～ 185

  From: ₹ 1,065.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap_HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	46 ～ 88

  From: ₹ 2,119.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Nickel Base Alloys_ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1.75	Powder high-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 82

  From: ₹ 1,326.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps_HT

  YAMAWA MFG

  Hand tap used for general tapping work.
  [Features]
  ・ High blade tip strength makes it easy for regrinding.
  ・ More suitable for manual work compared to taps of other shapes.
  ・ 2 types are available, with 5P or 1.5P chamfered threads.
  ・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
  ・ Machining with mechanical machinery is also possible.
  ・ Has straight grooves out of consideration for cutting chip stow.
  ・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
  [Applications]
  ・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10	unified	Quenched and tempered steel (25 to 35 HRC)[○]	24	High-speed steel	Hand Tap	For through hole / For blind hole	5P	-	NA	60

  From: ₹ 841.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series, X Performer Long Shank LT-S-XPF

  OSG

  [Specifications]
  · Shape: Roll tap
  · Screw type: metric
  · Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.5 ～ 1.75	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	-	Other	Available	80 ～ 150

  From: ₹ 2,736.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Point Tap SGPO

  NACHI(FUJIKOSHI)

  [Features]
  ・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.
  

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.45	High-speed steel	Point tap	For through hole	5	TiCN	Available	-

  From: ₹ 2,145.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Series High-Speed Steel Point Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3	Cobalt HSS	Point tap	For through hole	5P	Non-Coated	NA	40 ～ 120

  From: ₹ 512.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

  OSG

  Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / unified	Quenched and tempered steel (25 to 35 HRC)[◎]	0.4 ～ 32	Carbide	Thread cutter	For through hole / For blind hole	-	For High Hardness (Silicon Group) / Other	Available	40

  From: ₹ 16,746.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap V Coated_VP-SFT

  OSG

  Optimal for processing steel alloy pre-hardened steel of 35 to 42 HRC.
  Tool Material: Powder metal high-speed steel
  Thread type: Metric
  Hole type: For blind holes
  Work material: General steel / heat-treated steel
  Coating: Surface treatment for steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.5 ～ 1.75	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	TiCN	Available	46 ～ 82

  From: ₹ 1,805.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap with Long Shank_CPM-LT-SFT

  OSG

  The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M16	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	2	Powder high-speed steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	150

  From: ₹ 8,883.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series MC - Planet Cutter PNGT

  OSG

  If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / Taper for Pipe / Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[○]	1 ～ 19	Cobalt HSS	Thread cutter	For through hole / For blind hole	-	TiN	Available	80 ～ 210

  From: ₹ 24,006.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Pointed Tap with Long Shank_CPM-LT-POT

  OSG

  The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	1.25 ～ 1.75	Powder high-speed steel	Point tap	For through hole	5P	Non-Coated	NA	150

  From: ₹ 4,310.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated_TIN-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (25 to 35 HRC)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 3,249.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

  YAMAWA MFG

  Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M18	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2.5	Cobalt HSS	Point tap	For through hole	4.5P	-	NA	46 ～ 100

  From: ₹ 1,036.65
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]
  ·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.75 ～ 1.5	Alloy HSS	Spiral Tap	For through hole / For blind hole	2.5	TiCN	Available	82

  From: ₹ 3,064.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Thread Cutting Tool (for Unified Threads) MMTU

  NS TOOL

  [Features]
  ・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.
  ・ Adopts MUGEN Coating Premium for the realization of a long life.
  ・ For Unified Standard threads
  

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  NO.0-80UNF ～ 1/4-20UNC	unified	Quenched and tempered steel (25 to 35 HRC)[◎]	-	Carbide	Thread cutter	For blind hole	-	TiAlN	Available	45

  From: ₹ 7,021.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

  OSG

  Enables efficient chip discharge by discharging cutting fluid from the oil holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.5 ～ 3	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	60 ～ 120

  From: ₹ 22,756.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	46 ～ 88

  From: ₹ 2,306.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Difficult-To-Cut Materials CPM-POT

  OSG

  The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M48	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.3 ～ 5	Powder high-speed steel	Point tap	For through hole	5P	Non-Coated	NA	34 ～ 185

  From: ₹ 1,006.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

  OSG

  TiN coating excellent in welding resistance and abrasion resistance is applied

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (25 to 35 HRC)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (25 to 35 HRC)[◎]	11 ～ 28	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	55 ～ 95

  From: ₹ 3,197.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (25 to 35 HRC)[◎]	11 ～ 19	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	62 ～ 95

  From: ₹ 4,753.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (25 to 35 HRC)[○]	11 ～ 28	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	120 ～ 150

  From: ₹ 6,391.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MMTS Micro Threading Tool

  NS TOOL

  Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  S0.1 ～ S1.4	Other	Quenched and tempered steel (25 to 35 HRC)[◎]	0.025 ～ 0.3	Carbide	Thread cutter	-	-	TiAlN	Available	45

  From: ₹ 6,497.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP

  YAMAWA MFG

  Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M14	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	1.25 ～ 1.5	Cobalt HSS	Spiral Tap	For through hole / For blind hole	2.5P	TiCN	Available	75 ～ 88

  From: ₹ 4,323.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP

  YAMAWA MFG

  Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M14	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	1.25 ～ 1.5	Cobalt HSS	Spiral Tap	For through hole / For blind hole	2.5P	TiCN	Available	75 ～ 88

  From: ₹ 4,323.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps_SP

  YAMAWA MFG

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
  [Features]
  ・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
  ・ Intermittent cutting of female threads with keyway is also possible.
  ・ Capable of machining both synchronously and asynchronously.
  ・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
  ・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
  ・ The tap can easily cut.
  ・ Intermittent cutting of pilot holes with keyway is also possible.
  ・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
  [Applications]
  ・ Ideal for machining blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 1/4	Whitworth	Quenched and tempered steel (25 to 35 HRC)[○]	7	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	145

  From: ₹ 18,522.93
  Days to Ship: 5 Day(s)

  5 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for Left Hand Threads_PO-V

  YAMAWA MFG

  Coated point tap suitable for low carbon steel to high carbon steel machining.
  [Features]
  · Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1.75	High-speed steel	Point tap	For through hole	5P	TiN	Available	46 ～ 82

  From: ₹ 1,684.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M6	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1	Powder high-speed steel	Spiral Tap	For through hole	5P	-	NA	46 ～ 62

  From: ₹ 1,453.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Titanium Alloys_ZET-B

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2	Powder high-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 95

  From: ₹ 1,409.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Plus Series Spiral Fluted Taps_+SP

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
  [Features]
  · Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
  [Applications]
  · Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 1	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 62

  From: ₹ 769.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP

  YAMAWA MFG

  Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
  [Features]
  · A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
  · Completely threaded to prevent the blade from chipping.
  · Reduction of friction resistance and tapping torque.
  · Maintains screw guidance (stable machining).
  · Maintains excellent chip discharge performance (smooth discharge).
  [Applications]
  · Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
  · Ideal for water soluble cutting fluids.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	42 ～ 82

  From: ₹ 1,606.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps_LS-SP

  YAMAWA MFG

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M16	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	1 ～ 2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	100 ～ 200

  From: ₹ 2,357.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps, Coated_LS-SP-V

  YAMAWA MFG

  * LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	100

  From: ₹ 2,988.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	OSG	MISUMI	OSG	OSG	OSG	YAMAWA MFG	MISUMI	OSG	YAMAWA MFG	MISUMI	OSG	OSG	YAMAWA MFG	YAMAWA MFG	OSG	NACHI(FUJIKOSHI)	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	NACHI(FUJIKOSHI)	NS TOOL	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】	CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT	MT Series High-Speed Steel Spiral Tap	Fluteless Tap (X Performer)_S-XPF	CPM Straight Flutes Tap_CPM-HT	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Hand Taps for Left Hand Threads_HT-LH	TS Coated Carbide Threading Cutter, for Internal Metric Threads	Straight Flutes Tap TiN coated_TIN-HT	Plus Series Spiral Pointed Taps_+PO	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads	CPM Spiral Tap_CPM-SFT	LH Spiral SYNCHRO Tap_HS-RFT	Spiral Fluted Taps for Nickel Base Alloys_ZEN-B	Hand Taps_HT	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	SG Point Tap SGPO	MT Series High-Speed Steel Point Tap	Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC	CPM Spiral Tap V Coated_VP-SFT	CPM Spiral Tap with Long Shank_CPM-LT-SFT	Planet Cutter Series MC - Planet Cutter PNGT	CPM Pointed Tap with Long Shank_CPM-LT-POT	Taper Pipe Thread Tap TiN coated_TIN-TPT	Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO	SG Spiral Tap SGSP	Thread Cutting Tool (for Unified Threads) MMTU	Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT	Pointed Tap for Difficult-To-Cut Materials CPM-POT	Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT	Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT	Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT	CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT	MMTS Micro Threading Tool	For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP	For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP	Spiral Fluted Taps_SP	Spiral Pointed Taps for Left Hand Threads_PO-V	Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P	Spiral Fluted Taps for Titanium Alloys_ZET-B	Plus Series Spiral Fluted Taps_+SP	Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP	Long Shank Spiral Fluted Taps_LS-SP	Long Shank Spiral Fluted Taps, Coated_LS-SP-V
From	₹ 2,797.18	₹ 1,945.15	₹ 512.00	₹ 2,505.02	₹ 1,211.16	₹ 2,930.95	₹ 1,434.45	₹ 13,313.13	₹ 1,687.98	₹ 771.65	₹ 7,195.40	₹ 1,065.16	₹ 2,119.27	₹ 1,326.00	₹ 841.11	₹ 2,736.73	₹ 2,145.47	₹ 512.00	₹ 16,746.80	₹ 1,805.85	₹ 8,883.22	₹ 24,006.31	₹ 4,310.53	₹ 3,249.73	₹ 1,036.65	₹ 3,064.29	₹ 7,021.27	₹ 22,756.65	₹ 2,306.78	₹ 1,006.42	₹ 3,394.38	₹ 3,197.49	₹ 4,753.85	₹ 6,391.95	₹ 6,497.73	₹ 4,323.58	₹ 4,323.58	₹ 18,522.93	₹ 1,684.93	₹ 1,453.22	₹ 1,409.00	₹ 769.36	₹ 1,606.31	₹ 2,357.31	₹ 2,988.16
Days to Ship	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s)	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Screw size (Nominal)	M2 ～ M12	No.2UN ～ M12	M2 ～ M24	M1 ～ M45	M3 ～ M48	M3 ～ M30	M2.5 ～ M8	M3 ～ M12	M2 ～ M24	M3 ～ M6	M3 ～ M20	M1.4 ～ M48	M3 ～ M14	M3 ～ M12	No.10	M3 ～ M12	M2.6	M2 ～ M24	-	M3 ～ M12	M16	-	M8 ～ M12	R1 ～ R3/8	M3 ～ M18	M8 ～ M12	NO.0-80UNF ～ 1/4-20UNC	-	M3 ～ M14	M1.4 ～ M48	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	S0.1 ～ S1.4	M10 ～ M14	M10 ～ M14	1 1/4	M3 ～ M12	M3 ～ M6	M3 ～ M16	M2 ～ M6	M2 ～ M12	M8 ～ M16	M3
Screw Types	Meter	Meter / unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	unified	Meter	Meter	Meter	Meter / unified	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Taper for Pipe	Meter	Meter	unified	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Other	Meter	Meter	Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]
Pitch (P), Number of Threading(mm)	0.4 ～ 1.75	0.25 ～ 56	0.4 ～ 3	0.2 ～ 4.5	0.5 ～ 5	0.5 ～ 3.5	0.45 ～ 0.75	0.5 ～ 1.75	0.4 ～ 3	0.5 ～ 1	0.5 ～ 2.5	0.3 ～ 5	0.5 ～ 2	0.5 ～ 1.75	24	0.5 ～ 1.75	0.45	0.4 ～ 3	0.4 ～ 32	0.5 ～ 1.75	2	1 ～ 19	1.25 ～ 1.75	11 ～ 28	0.5 ～ 2.5	0.75 ～ 1.5	-	0.5 ～ 3	0.5 ～ 2	0.3 ～ 5	11 ～ 28	11 ～ 28	11 ～ 19	11 ～ 28	0.025 ～ 0.3	1.25 ～ 1.5	1.25 ～ 1.5	7	0.5 ～ 1.75	0.5 ～ 1	0.5 ～ 2	0.4 ～ 1	0.4 ～ 1.75	1 ～ 2	0.5
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel / Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	High-speed steel	Carbide	Vanadium High-Speed Steel	High-speed steel	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	Cobalt HSS	Carbide	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Vanadium High-Speed Steel	Cobalt HSS	Alloy HSS	Carbide	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Carbide	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel
Tap Type	Spiral Tap	Roll tap	Spiral Tap	Roll tap	Hand Tap	Point tap	Hand Tap	Thread cutter	Hand Tap	Point tap	Thread cutter	Spiral Tap	Point tap	Spiral Tap	Hand Tap	Roll tap	Point tap	Point tap	Thread cutter	Spiral Tap	Spiral Tap	Thread cutter	Point tap	Tap for pipes	Point tap	Spiral Tap	Thread cutter	Thread cutter	Point tap	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Thread cutter	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole
Chamfer threads (Lcf)	2.5P	2P ～ 4P	2.5P	2P ～ 4P	2P ～ 5P	6P	5P	-	1.5P ～ 5P	5P	-	3P	6P	3P	5P	-	5	5P	-	2.5P	3P	-	5P	2.5P	4.5P	2.5	-	-	5P	5P	2.5P	2.5P	2.5P	2.5P	-	2.5P	2.5P	2.5P	5P	5P	3P	2.5P	2.5P	2.5P	2.5P
Coating Type	-	TiCN	Non-Coated	TiCN	Non-Coated	TiN	-	For High Hardness (Silicon Group)	TiN	-	TiAlN	Non-Coated	TiN	-	-	Other	TiCN	Non-Coated	For High Hardness (Silicon Group) / Other	TiCN	Non-Coated	TiN	Non-Coated	TiN	-	TiCN	TiAlN	TiAlN	TiN	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiCN	TiCN	-	TiN	-	-	-	TiN	-	-
Coating Y/N	NA	Available	NA	Available	NA	Available	NA	Available	Available	NA	Available	NA	Available	NA	NA	Available	Available	NA	Available	Available	NA	Available	NA	Available	NA	Available	Available	Available	Available	NA	Available	NA	NA	NA	Available	Available	Available	NA	Available	NA	NA	NA	Available	NA	NA
Overall Length (L)(mm)	40 ～ 82	30 ～ 82	40 ～ 120	30 ～ 220	46 ～ 185	100 ～ 200	46 ～ 70	48 ～ 74	40 ～ 120	46 ～ 62	57 ～ 115	34 ～ 185	46 ～ 88	46 ～ 82	60	80 ～ 150	-	40 ～ 120	40	46 ～ 82	150	80 ～ 210	150	55 ～ 95	46 ～ 100	82	45	60 ～ 120	46 ～ 88	34 ～ 185	55 ～ 95	55 ～ 95	62 ～ 95	120 ～ 150	45	75 ～ 88	75 ～ 88	145	46 ～ 82	46 ～ 62	46 ～ 95	42 ～ 62	42 ～ 82	100 ～ 200	100

Loading...