(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Straight Shank / End Mill Shank Drills (Carbide)（Coating Y/N：Available）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
180 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
OSG
[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chipsHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 66 ～ 153 20 ～ 101 general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] End Mill Shank Carbide NA Available Other From: ₹ 4,519.00 Days to Ship: 5 Day(s) or more 
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill, Regular
MISUMI
[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 13 38 ～ 124 3 ～ 77 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] End Mill Shank Carbide NA Available TiAlN From: ₹ 1,256.42 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D
OSG
[Features]
· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chipsHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 66 ～ 165 12 ～ 100 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] End Mill Shank Carbide Available Available Other From: ₹ 6,260.00 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GUHRING
Brazed carbide head type with a tube that uses highly springy hardened steel pipe. The screwdriver diameter is metric to support oil hole holders for machining centers.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 4.95 ～ 11.95 480 ～ 1080 432 ～ 1030 - - Carbide Available Available TiN From: ₹ 18,762.20 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Flat Drill 2D Type_ADF-2D
OSG
[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 50 ～ 140 10 ～ 88 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] End Mill Shank / straight shank Carbide NA Available Other From: ₹ 4,793.00 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VariDrill Solid Carbide Drill 8xD VDS403A
WIDIA
WIDIA Straight Shank, End Mill Shank Drill (Carbide) VariDrill Solid Carbide Drill 8xD VDS403A.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1.5 ～ 20 58 ～ 200 18 ～ 148 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] End Mill Shank Carbide Available Available TiAlN From: ₹ 13,350.15 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL
OSG
Ideal for processing from 55 to 70 HRC. A drill for ultra-high-hardness steel in which stable processing by highly reliable cutting edge shape and coating for high-hardness steel are combined.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 42 ～ 120 12 ～ 76 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: ₹ 8,653.00 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
MISUMI
[Features]
·Ideal for high-precision small-diameter hole drilling
·The shank diameter is unified to 3 mm, enabling high-precision chucking
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machiningHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.38 ～ 2.7 38 6 ～ 12 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] End Mill Shank Carbide NA Available TiAlN From: ₹ 1,990.96 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D
OSG
[Features]
· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chipsHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 70 ～ 225 18 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] End Mill Shank Carbide Available Available Other From: ₹ 8,733.00 Days to Ship: 2 Day(s) or more
2 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D
OSG
[Features]
· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 12 90 ～ 215 40 ～ 155 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] End Mill Shank Carbide Available Available Other From: ₹ 13,849.69 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High Performance Drill HO-HPD-3D, Series 3113
OSG
Tolerance for cutter diameter
- Up to Dia 3 mm: +0.012/+0.002
- Dia 3.1 mm - 6 mm: +0.016/+0.004
- Dia 6.1 mm - 10 mm: +0.021/+0.006
- Dia 10.1 mm - 18 mm: +0.025/+0.007
- Dia 18.1 mm - 20 mm: +0.029/+0.008Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 62 ～ 131 20 ～ 79 - - Carbide - Available WD1 From: ₹ 4,264.00 Days to Ship: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Double Margin Drill, Regular
MISUMI
[Features]
·By providing 4 margins on the outer periphery of the drill, the guide performance during chamfer and penetration is improved, enabling highly straight and stable drilling
·Supports a wide range of work materials from general steel to stainless steel
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 11 45 ～ 118 12 ～ 71 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] End Mill Shank Carbide NA Available TiAlN From: ₹ 5,029.18 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL
OSG
Small diameter carbide drill long type for stainless steel machining. Stainless steel processing provides stable durability.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.44 ～ 3 38 ～ 66 6 ～ 36 Stainless Steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: ₹ 2,054.98 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill, for Stainless Steel
ATOM
Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 ～ 45 1 ～ 15 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: ₹ 2,743.05 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill, Straight Shank / Regular
MISUMI
[Features]
·Versatile carbide drill for a wide range of applications
·TiAlN coating enables high-speed cutting
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 8 34 ～ 117 12 ～ 75 general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] straight shank Carbide NA Available TiAlN From: ₹ 1,203.16 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Miniature Drill MDR-R
NS TOOL
High precision specification ideal for precision parts machining. Diameter tolerance 0 to -0.005 mm
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type .0.4 ～ 1 38 1.2 ～ 10 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] End Mill Shank Carbide - Available TiAlN From: ₹ 2,041.56 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]
· MUGEN Flat Drill makes drilling holes in inclined or curved surfaces easy.
· Adopts a thinning shape (spiral thinning (⌀1 to ⌀2.9) / triple thinning (⌀3 to ⌀6)) developed to suit each size, a double margin (⌀2.6 or more), and a long neck shape to achieve holes with good and stable accuracy.
· MFD has a flat bottom blade that flattens out the bottoms of blind holes and is optimal for counterbore machining and thread cutting (thread milling) pilot holes.
· Through-holes can be drilled without the generation of burrs.
· Adopts a reliable MUGEN coating to support a range of work material from mild steel to stainless steel.
· Reduce drilling process time and improve machining efficiency with this 1 tool.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 1.9 55 2 ～ 11.8 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○] End Mill Shank Carbide NA Available TiAlN From: ₹ 3,595.11 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
MISUMI
[Features]
·Corner radius treatment suppresses chipping
·By adopting wavy flute shape, it achieves outstanding cutting sharpness and strength, and promotes cutting chip discharge
·Demonstrates high centripetal force by applying three rake + R thinning
·Combination of ultra-fine grain cemented carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 13 49 ～ 124 16 ～ 77 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide NA Available TiAlN From: ₹ 2,040.00 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular
MISUMI
[Features]
·Weak helix angle and high core diameter improve tool rigidity
·Achieves outstanding strength by adopting straight cutting edge
·Ideal for machining high hardness steel of HRC40 to 60
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 13 46 ～ 137 16 ～ 78 Quenched and tempered steel[○] / high hardness steel[◎] straight shank Carbide NA Available - From: ₹ 2,852.67 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
MISUMI
[Features]
·MISUMI original shape ideal for SUS430 machining.
·Designed with helix angle of 38° near the tip and 20° near the shank
·The 20° section has large core diameter for improved tool durability
·Superfine cemented carbide alloy provides excellent abrasion resistance and enables high-speed machining
·125° tip angle and combined helix angle improve cutting performanceHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 10 60 ～ 120 28 ～ 61 Stainless Steel[◎] End Mill Shank Carbide NA Available TiAlN From: ₹ 6,813.04 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 47 ～ 130 15 ～ 73 Aluminum[◎] / Copper[○] End Mill Shank / straight shank Carbide NA Available DLC From: ₹ 3,198.24 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.03 ～ 3 38 ～ 50 0.3 ～ 25 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: ₹ 2,614.47 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chipsHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 62 ～ 102 14 ～ 55 general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] End Mill Shank Carbide NA Available Other From: ₹ 5,014.00 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2.1 ～ 16 49 ～ 160 17 ～ 96 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] End Mill Shank / straight shank Carbide NA Available Other From: ₹ 6,649.85 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.5 ～ 20 47 ～ 145 1.65 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] End Mill Shank / straight shank Carbide NA Available Other From: ₹ 5,162.00 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills (Diamond Coated)_D-GDN
OSG
Demonstrates power in machining not only aluminum alloys, but also high silicone aluminum alloys where carbide drills have extremely short lives
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 54 ～ 126 18 ～ 76 Aluminum[◎] / Copper[○] End Mill Shank / straight shank Carbide NA Available Dia Coat From: ₹ 9,986.87 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drill for DLC Coated Aluminum/Steel SSND
OKAZAKI SEIKO
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2.5 ～ 13 50 ～ 118 15 ～ 60 general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] End Mill Shank / straight shank Carbide NA Available DLC From: ₹ 4,177.93 Days to Ship: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 2 ～ 72 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] End Mill Shank / straight shank Carbide Available Available Other From: ₹ 9,370.36 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High Performance Drill HPD-3D, Series 3103
OSG
Tolerance for cutter diameter
- Up to Dia 3 mm: +0.012/+0.002
- Dia 3.1 mm - 6 mm: +0.016/+0.004
- Dia 6.1 mm - 10 mm: +0.021/+0.006
- Dia 10.1 mm - 18 mm: +0.025/+0.007
- Dia 18.1 mm - 20 mm: +0.029/+0.008Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 20 35 ～ 131 7 ～ 79 - - Carbide - Available For High Hardness (Silicon Group) From: ₹ 2,180.00 Days to Ship: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 13 46 ～ 124 12 ～ 77 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] End Mill Shank Carbide NA Available TiAlN From: ₹ 3,254.27 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
MISUMI
[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole toleranceHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 13 46 ～ 137 16 ～ 78 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] straight shank Carbide NA Available TiAlN From: ₹ 1,886.96 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Drill for Aluminum Machining, Regular
MISUMI
[Features]
·DLC coating with excellent abrasion resistance and chip-weld resistance makes it ideal for machining non-ferrous metals such as aluminum and copper
·Demonstrates excellent chip removal capability and sharpness due to the high helix shape
·Lineup of sizes that are effective for drilling pilot holes for plastic processing with forming taps difficult to control precision
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 5.52 ～ 11.38 85 ～ 128 41 ～ 71 Cast Iron[○] / Aluminum[◎] / Copper[○] End Mill Shank Carbide NA Available DLC From: ₹ 4,391.16 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 48 ～ 144 16 ～ 80 general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] End Mill Shank / straight shank Carbide NA Available Other From: ₹ 2,379.87 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.19 ～ 5 38 ～ 64 1.2 ～ 26 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] End Mill Shank / straight shank Carbide NA Available Other From: ₹ 1,969.25 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS
OSG
Developed for machining small diameter holes in hardened steel, it is suitable for high-precision and long-life machining of shallow holes (up to 3D or so)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 2 38 ～ 46 1.6 ～ 12 Quenched and tempered steel[○] / high hardness steel[◎] End Mill Shank Carbide Available Available Other From: ₹ 5,558.84 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UTDSX UT, Micro Coating Unimax Short Flute Drill Bit
UNION TOOL
[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· A high rigidity short blade is optimal for high precision machining and also for pilot hole processingHole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 2 38 1.5 ～ 10 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] End Mill Shank Carbide NA Available TiCN From: ₹ 1,570.13 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
Realizes standardization from tip diameter φ 0.01. Pioneering a New Area for Hole Drilling with Drills
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.1 40 0.1 ～ 1 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] End Mill Shank Carbide NA Available TiAlN From: ₹ 3,324.71 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSDH Drill for Small Diameter High-Hardness Processing
NS TOOL
Allows drilling into 65 HCR quenched steel with small diameter drills. Achieves low variation in hole diameter and stable long product life.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 1 45 0.2 ～ 2 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] End Mill Shank Carbide NA Available TiAlN From: ₹ 4,009.15 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Solid Drill with Coating
ATOM
ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 6 30 ～ 80 4 ～ 40 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] straight shank Carbide NA Available TiAlN From: ₹ 1,682.25 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DIJET
It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 14 ～ 32 113 ～ 206 51 ～ 146 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] End Mill Shank / straight shank Carbide Available Available - From: ₹ 25,438.13 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GUHRING
Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 1.2 ～ 12 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] - Carbide NA Available TiAlN From: ₹ 3,159.60 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GUHRING
Brazed carbide head type with a tube that uses highly springy hardened steel pipe. The screwdriver diameter is metric to support oil hole holders for machining centers.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 4 ～ 12 150 ～ 370 100 ～ 310 - - Carbide Available Available TiN From: ₹ 16,627.20 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CoroDrill Delta-C, Carbide Solid Drill
SANDVIK
Solid drill providing high accuracy surface roughness ideal for drilling any kind of workpiece.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 13 ～ 14.5 124 ～ 133 56 ～ 59 general steel[○] / high hardness steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] End Mill Shank Carbide Available Available TiAlN From: ₹ 41,276.45 Days to Ship: 13 Day(s) or more
13 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Solid Pivot Type Drill DLC Coat Specifications KDR -DLC
KYOWA SEIKO
[Specifications]
· Shape: Straight Shank / End Mill Shank Drill (carbide)
· Material: Micro Grain Alloy
· Work Materials: Aluminum [◎], Copper [◎], Resin [◎]Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.09 ～ 3 38 ～ 50 0.9 ～ 25 Aluminum[◎] / Copper[◎] / Resin[◎] End Mill Shank Carbide NA Available DLC From: ₹ 4,180.22 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 100 ～ 250 14 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] End Mill Shank Carbide Available / NA Available Other From: ₹ 6,976.67 Days to Ship: 5 Day(s) or more
5 Day(s) or more
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | MISUMI | OSG | GUHRING | OSG | WIDIA | OSG | MISUMI | OSG | OSG | OSG | MISUMI | OSG | ATOM | MISUMI | NS TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | ATOM | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OKAZAKI SEIKO | NACHI(FUJIKOSHI) | OSG | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | ATOM | DIJET | GUHRING | GUHRING | SANDVIK | KYOWA SEIKO | NACHI(FUJIKOSHI) |
| Product Series | WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL | TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model | Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D | Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL | TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular | TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model | Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS | Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS | Carbide Solid Pivot Type Drill DLC Coat Specifications KDR -DLC | ||||||||||||||||||||||||||||||||||
| From | ₹ 4,519.00 | ₹ 1,256.42 | ₹ 6,260.00 | ₹ 18,762.20 | ₹ 4,793.00 | ₹ 13,350.15 | ₹ 8,653.00 | ₹ 1,990.96 | ₹ 8,733.00 | ₹ 13,849.69 | ₹ 4,264.00 | ₹ 5,029.18 | ₹ 2,054.98 | ₹ 2,743.05 | ₹ 1,203.16 | ₹ 2,041.56 | ₹ 3,595.11 | ₹ 2,040.00 | ₹ 2,852.67 | ₹ 6,813.04 | ₹ 3,198.24 | ₹ 2,614.47 | ₹ 5,014.00 | ₹ 6,649.85 | ₹ 5,162.00 | ₹ 9,986.87 | ₹ 4,177.93 | ₹ 9,370.36 | ₹ 2,180.00 | ₹ 3,254.27 | ₹ 1,886.96 | ₹ 4,391.16 | ₹ 2,379.87 | ₹ 1,969.25 | ₹ 5,558.84 | ₹ 1,570.13 | ₹ 3,324.71 | ₹ 4,009.15 | ₹ 1,682.25 | ₹ 25,438.13 | ₹ 3,159.60 | ₹ 16,627.20 | ₹ 41,276.45 | ₹ 4,180.22 | ₹ 6,976.67 |
| Days to Ship | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 2 Day(s) or more | 6 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 2 ～ 20 | 0.3 ～ 13 | 2 ～ 20 | 4.95 ～ 11.95 | 2 ～ 20 | 1.5 ～ 20 | 2 ～ 12 | 0.38 ～ 2.7 | 2 ～ 20 | 3 ～ 12 | 3 ～ 20 | 1 ～ 11 | 0.44 ～ 3 | 0.1 ～ 3 | 1 ～ 8 | .0.4 ～ 1 | 1 ～ 1.9 | 3 ～ 13 | 3 ～ 13 | 3 ～ 10 | 2 ～ 12 | 0.03 ～ 3 | 2 ～ 12 | 2.1 ～ 16 | 0.5 ～ 20 | 2 ～ 12 | 2.5 ～ 13 | 3 ～ 16 | 1 ～ 20 | 2 ～ 13 | 3 ～ 13 | 5.52 ～ 11.38 | 3 ～ 16 | 0.19 ～ 5 | 0.3 ～ 2 | 0.3 ～ 2 | 0.01 ～ 0.1 | 0.1 ～ 1 | 0.3 ～ 6 | 14 ～ 32 | 0.1 ～ 3 | 4 ～ 12 | 13 ～ 14.5 | 0.09 ～ 3 | 3 ～ 20 |
| Overall Length L(mm) | 66 ～ 153 | 38 ～ 124 | 66 ～ 165 | 480 ～ 1080 | 50 ～ 140 | 58 ～ 200 | 42 ～ 120 | 38 | 70 ～ 225 | 90 ～ 215 | 62 ～ 131 | 45 ～ 118 | 38 ～ 66 | 38 ～ 45 | 34 ～ 117 | 38 | 55 | 49 ～ 124 | 46 ～ 137 | 60 ～ 120 | 47 ～ 130 | 38 ～ 50 | 62 ～ 102 | 49 ～ 160 | 47 ～ 145 | 54 ～ 126 | 50 ～ 118 | 68 ～ 146 | 35 ～ 131 | 46 ～ 124 | 46 ～ 137 | 85 ～ 128 | 48 ～ 144 | 38 ～ 64 | 38 ～ 46 | 38 | 40 | 45 | 30 ～ 80 | 113 ～ 206 | 38 | 150 ～ 370 | 124 ～ 133 | 38 ～ 50 | 100 ～ 250 |
| Groove Length L(mm) | 20 ～ 101 | 3 ～ 77 | 12 ～ 100 | 432 ～ 1030 | 10 ～ 88 | 18 ～ 148 | 12 ～ 76 | 6 ～ 12 | 18 ～ 160 | 40 ～ 155 | 20 ～ 79 | 12 ～ 71 | 6 ～ 36 | 1 ～ 15 | 12 ～ 75 | 1.2 ～ 10 | 2 ～ 11.8 | 16 ～ 77 | 16 ～ 78 | 28 ～ 61 | 15 ～ 73 | 0.3 ～ 25 | 14 ～ 55 | 17 ～ 96 | 1.65 ～ 90 | 18 ～ 76 | 15 ～ 60 | 2 ～ 72 | 7 ～ 79 | 12 ～ 77 | 16 ～ 78 | 41 ～ 71 | 16 ～ 80 | 1.2 ～ 26 | 1.6 ～ 12 | 1.5 ～ 10 | 0.1 ～ 1 | 0.2 ～ 2 | 4 ～ 40 | 51 ～ 146 | 1.2 ～ 12 | 100 ～ 310 | 56 ～ 59 | 0.9 ～ 25 | 14 ～ 90 |
| work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | - | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | Stainless Steel[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | Quenched and tempered steel[○] / high hardness steel[◎] | Stainless Steel[◎] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Quenched and tempered steel[○] / high hardness steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[○] / high hardness steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | - | End Mill Shank | straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank / straight shank | - | - | End Mill Shank | End Mill Shank | End Mill Shank |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| With/without Oil Hole | NA | NA | Available | Available | NA | Available | NA | NA | Available | Available | - | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | - | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | Available | NA | Available | Available | NA | Available / NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | Other | TiAlN | Other | TiN | Other | TiAlN | Other | TiAlN | Other | Other | WD1 | TiAlN | Other | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | - | TiAlN | DLC | For General Steels (AlCrN, etc.) | Other | Other | Other | Dia Coat | DLC | Other | For High Hardness (Silicon Group) | TiAlN | TiAlN | DLC | Other | Other | Other | TiCN | TiAlN | TiAlN | TiAlN | - | TiAlN | TiN | TiAlN | DLC | Other |
Loading...
Configure
Specification/Dimensions
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.383
- 2.39
- 2.4
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.779
- 2.78
- 2.79
- 2.8
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.558
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.13
- 6.15
- 6.2
- 6.23
- 6.25
- 6.3
- 6.33
- 6.35
- 6.35 (¼")
- 6.375
- 6.4
- 6.43
- 6.45
- 6.48
- 6.49
- 6.5
- 6.51
- 6.52
- 6.528
- 6.53
- 6.55
- 6.6
- 6.63
- 6.65
- 6.7
- 6.73
- 6.746
- 6.75
- 6.8
- 6.83
- 6.85
- 6.9
- 6.93
- 6.95
- 6.98
- 6.99
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.13
- 7.14
- 7.145
- 7.15
- 7.2
- 7.23
- 7.25
- 7.3
- 7.33
- 7.35
- 7.36
- 7.38
- 7.4
- 7.43
- 7.45
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.541
- 7.55
- 7.6
- 7.63
- 7.65
- 7.7
- 7.73
- 7.75
- 7.8
- 7.83
- 7.85
- 7.9
- 7.93
- 7.938
- 7.94
- 7.95
- 7.98
- 7.99
-
8～8.99
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.13
- 8.15
- 8.2
- 8.23
- 8.25
- 8.3
- 8.33
- 8.334
- 8.35
- 8.4
- 8.43
- 8.433
- 8.45
- 8.48
- 8.49
- 8.5
- 8.50000000000001
- 8.51
- 8.52
- 8.53
- 8.55
- 8.58
- 8.6
- 8.63
- 8.65
- 8.7
- 8.73
- 8.733
- 8.75
- 8.8
- 8.80000000000001
- 8.83
- 8.85
- 8.9
- 8.90000000000001
- 8.93
- 8.95
- 8.98
- 8.99
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.129
- 9.13
- 9.15
- 9.2
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.3
- 9.30000000000001
- 9.33
- 9.347
- 9.35
- 9.36
- 9.38
- 9.4
- 9.40000000000001
- 9.43
- 9.45
- 9.48
- 9.49
- 9.5
- 9.50000000000001
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.6
- 9.60000000000001
- 9.63
- 9.65
- 9.7
- 9.70000000000001
- 9.73
- 9.75
- 9.8
- 9.80000000000001
- 9.83
- 9.85
- 9.9
- 9.90000000000001
- 9.92
- 9.921
- 9.93
- 9.95
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.13
- 10.15
- 10.2
- 10.23
- 10.25
- 10.3
- 10.31
- 10.32
- 10.33
- 10.35
- 10.4
- 10.43
- 10.45
- 10.48
- 10.49
- 10.5
- 10.51
- 10.52
- 10.53
- 10.55
- 10.6
- 10.63
- 10.65
- 10.7
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.83
- 10.85
- 10.9
- 10.93
- 10.95
- 10.98
- 10.99
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.113
- 11.13
- 11.15
- 11.2
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.33
- 11.35
- 11.36
- 11.38
- 11.4
- 11.43
- 11.45
- 11.48
- 11.49
- 11.5
- 11.509
- 11.51
- 11.52
- 11.53
- 11.55
- 11.56
- 11.6
- 11.63
- 11.65
- 11.7
- 11.73
- 11.75
- 11.8
- 11.83
- 11.85
- 11.9
- 11.908
- 11.91
- 11.93
- 11.95
- 11.98
- 11.99
-
12～12.99
- 12
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.15
- 12.2
- 12.25
- 12.3
- 12.304
- 12.35
- 12.4
- 12.45
- 12.48
- 12.49
- 12.5
- 12.51
- 12.52
- 12.55
- 12.6
- 12.65
- 12.7
- 12.75
- 12.8
- 12.85
- 12.9
- 12.95
- 12.96
- 12.98
- 12.99
-
13～13.9
- 13
- 13.096
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.5
- 13.55
- 13.6
- 13.7
- 13.8
- 13.89
- 13.891
- 13.9
-
14～14.96
- 14
- 14.1
- 14.2
- 14.28
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.684
- 14.7
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.5
- 15.55
- 15.6
- 15.7
- 15.8
- 15.87
- 15.875
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.271
- 16.3
- 16.4
- 16.5
- 16.6
- 16.67
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.463
- 17.5
- 17.55
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.258
- 18.3
- 18.4
- 18.5
- 18.6
- 18.654
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5/24.7
- 24
- 24.5
- 24.5/24.7
-
25～25.5
- 25
- 25.5
-
26～26.5/26.7
- 26
- 26.5
- 26.5/26.7
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.4
- 32
- 32.3
- 32.4
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
130
-
131
-
132
-
133
-
135
-
136
-
137
-
138
-
140
-
143
-
144
-
145
-
146
-
148
-
149
-
150
-
152
-
153
-
154
-
155
-
156
-
159
-
160
-
161
-
162
-
163
-
165
-
167
-
168
-
169
-
170
-
171
-
173
-
175
-
176
-
177
-
180
-
182
-
183
-
184
-
185
-
188
-
189
-
190
-
195
-
196
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
215
-
216
-
218
-
219
-
220
-
223
-
224
-
227
-
230
-
231
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
264
-
265
-
270
-
272
-
274
-
277
-
280
-
282
-
292
-
295
-
300
-
302
-
310
-
315
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
-
Shank Type
-
Tool Material Type
-
With/without Oil Hole
-
Coating Y/N
- Available
- NA
-
Coating Type
Related Categories to Straight Shank / End Mill Shank Drills (Carbide)
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy