Grooving / Cutting Off Holders（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LG123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	3 ～ 6	3.5 ～ 8	Right-hand / Left-hand	-	2 Corner	16 ～ 25

  From: ₹ 16,231.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Series, Short Tool Bit, QS-SMALR/L1616E3HP

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	-	-	Right-hand / Left-hand	-	2 Corner	16

  From: ₹ 32,603.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	0.5-3.18	6.4	Left-hand	1	3 Corner	10

  From: ₹ 34,146.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max, Q-Cut, Flange Grooving, 570-32R/L151.3-024/-023/A/B

  SANDVIK

  Parting and grooving tools that improve part production capacity by realizing high productivity and long tool life

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	3	8.69	Right-hand / Left-hand	35	1 Corner	-

  From: ₹ 28,757.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23

  SANDVIK

  Sandvik Grooving/Cut-Off Holder T-Max Q-Cut Coromant Capto Cutting Unit CR/LF151.23

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	2 ～ 6	15 ～ 60	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 31,240.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Head For Grooving End Surfaces 570

  SANDVIK

  Versatile shank bit for face grooving with 1-corner and 2-corner specifications

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Cutting off	-	-	Right-hand / Left-hand	-	2 Corner	-

  From: ₹ 31,773.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Adapter (Cylindrical Shank) Carbide Tool Bit, Internally Lubricated, MB-E-R

  SANDVIK

  Allows quick tool and insert setup for internal machining of high-precision parts

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving	-	-	Right-hand	-	-	-

  From: ₹ 46,011.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut SL Blade For Face Grooving, Screw Clamp, 570-R/L123-B

  SANDVIK

  [Features]
  A high clamp rigidity type cutting head for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	2.5 ～ 6	12 ～ 18	Right-hand / Left-hand	44 ～ 1000	2 Corner	-

  From: ₹ 28,757.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder GVF

  KYOCERA

  A clamp-on holder for face grooving.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: ₹ 16,811.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder KGD-S

  KYOCERA

  [Features]
  · KGD-S type: Realizes high efficiency machining thanks to the excellent chip discharge performance and high rigidity holder.
  [Applications]
  · Holder for Grooving and Cutting Off

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	-	-	-	-	-	-

  From: ₹ 13,015.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type

  SUMITOMO ELECTRIC HARDMETAL

  Highly rigid design suppresses vibrations when cutting. Ideal for grooving, deep grooving, and cutting off.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2	20	Right-hand	-	2 Corner	25

  From: ₹ 15,004.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type

  SUMITOMO ELECTRIC HARDMETAL

  High rigidity with double clamp (screw-on type for mini turning tools). The triangular type allows 3 corners to be used.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1～1.45	2	Left-hand	-	3 Corner	20

  From: ₹ 8,225.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Small Diameter Perforating Bit, SCT Type

  SUMITOMO ELECTRIC HARDMETAL

  Use of screw-fastening clamp method enables insert replacement merely by loosening the screw

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	0.5–2.0	-	Right-hand	5~16	2 Corner	10

  From: ₹ 8,746.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (F Cut) Blade for Plunging

  ISCAR

  [Features]
  F-cut type blade.
  [Applications]
  Suitable for parting-off and deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.2 ～ 3	-	No-hand	18 ～ 100	1 Corner	19 ～ 32

  From: ₹ 11,831.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes

  ISCAR

  Integrated holder for parting off
  General purpose, for CNC lathes (JETCUT), for automatic lathes

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.2 ～ 1.6	-	Right-hand / Left-hand	18 ～ 35	1 Corner	8 ～ 14

  From: ₹ 14,745.75
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (F Cut) Blade for Plunging, Integrated Holder, for General Purpose Lathe, Strengthened Type

  ISCAR

  [Applications]
  Used for parting off and deep grooving of steel materials on general purpose lathe.
  [Features]
  Integrated self-grip holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	3 ～ 3.1	-	Right-hand	35 ～ 52	1 Corner	16 ～ 20

  From: ₹ 13,774.67
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (T Cut) Blade for Plunging

  ISCAR

  When using T cut, the F cut and DO GRIP are recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2.2/2.4 ～ 4.1	-	No-hand	40 ～ 100	1 Corner	19 ～ 32

  From: ₹ 11,831.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tang Grip, Blade for Cutting Protrusions and Grooving

  ISCAR

  [Features]
  Blade for parting and grooving
  This is the latest chip cutting-off tool with vertical inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 6	-	No-hand	50 ～ 160	1 Corner	-

  From: ₹ 11,831.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tang Grip, Integrated Holder for Cutting Protrusions and Grooving

  ISCAR

  [Features]
  Integrated tongue grip holder for parting and grooving
  This is the latest chip cutting-off tool with vertical inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	4	-	Right-hand	56	1 Corner	25

  From: ₹ 16,953.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)

  ISCAR

  Diagonal screw clamp system achieves high rigidity and retention.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.0/1.5 ～ 1.4	-	Right-hand / Left-hand	18 ～ 25.4	1 Corner	10 ～ 20

  From: ₹ 11,213.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions

  ISCAR

  [Features]
  Integrated tongue grip holder for parting using a newly developed clamping method

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding	1.0 2.0 2.2 ～ 6.0/6.3	-	Right-hand / Left-hand	35 ～ 76	2 Corner	10 ～ 25

  From: ₹ 14,568.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HELI GRIP, Outer Diameter Machining Integrated Holder

  ISCAR

  [Applications]
  Used for cutting off, deep grooving, turning and enlarging of outer diameters.
  [Features]
  Heli-grip holder integrated with tip.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding	3 ～ 6	12 ～ 30	Right-hand / Left-hand	24 ～ 60	2 Corner	12 ～ 32

  From: ₹ 14,215.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBAS Type

  KYOCERA

  A lever-lock type outer diameter shallow grooving holder.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 11,058.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 11,058.93
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDMS Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 671.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: ₹ 11,482.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 10,002.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,655.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip FGG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 2,734.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 967.93
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.
  For outer diameter grooving and face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 13,570.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type

  KYOCERA

  [Features]It can be used for shallow grooving on the outer diameter and can be used for GH, GHU and GA inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 12,350.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.
  For outer diameter deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 12,350.09
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)

  KYOCERA

  Inner diameter grooving SIGE model for automatic lathes.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 36,741.80
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)

  KYOCERA

  GIV model tip for small diameter grroving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 1,183.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type

  KYOCERA

  [Specifications]·Machining applications: grooving; cutting direction: right; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 25,192.20
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

  KYOCERA

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,877.38
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore End Surface Slotting, EZ Bar Conforming Tip

  KYOCERA

  T dimension: Shows the machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 3,088.62
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore End Surface Slotting Series, Model VNFG (System Bar)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 3,082.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)

  KYOCERA

  · T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: ₹ 18,232.71
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)

  KYOCERA

  T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 8,692.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder KFMS Type

  KYOCERA

  Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	4	-	Right-hand	50	-	20

  From: ₹ 17,730.44
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder KFMS-8 Type

  KYOCERA

  [Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 19,021.62
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder Compatible Tip

  KYOCERA

  Takinor multi-functional / end face grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,302.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 18,591.67
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

Brand
Product Series
From
Days to Ship
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product Series	CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LG123	QS Series, Short Tool Bit, QS-SMALR/L1616E3HP	Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF	T-Max, Q-Cut, Flange Grooving, 570-32R/L151.3-024/-023/A/B	T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23	CoroCut 1/2 Head For Grooving End Surfaces 570	CoroCut MB Adapter (Cylindrical Shank) Carbide Tool Bit, Internally Lubricated, MB-E-R	CoroCut SL Blade For Face Grooving, Screw Clamp, 570-R/L123-B	Grooving Holder GVF	Grooving Holder KGD-S	SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type	SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type	SEC-Small Diameter Perforating Bit, SCT Type	Self Grip (F Cut) Blade for Plunging	Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes	Self Grip (F Cut) Blade for Plunging, Integrated Holder, for General Purpose Lathe, Strengthened Type	Self Grip (T Cut) Blade for Plunging	Tang Grip, Blade for Cutting Protrusions and Grooving	Tang Grip, Integrated Holder for Cutting Protrusions and Grooving	Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)	Do-Grip Integrated Holder for Cutting Protrusions	HELI GRIP, Outer Diameter Machining Integrated Holder	Outer Diameter Shallow Groove Holder KGBAS Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type	Lathe Turning (Cutter) Bit GDMS Model	Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)	Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)	Multi-Functional / Grooving (Cutting-Off) Chip GMG Type	Multi-Functional / Grooving (Cutting-Off) Chip FGG Type	Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type	Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)	Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)	Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Small Bore End Surface Slotting, EZ Bar Conforming Tip	Small Bore End Surface Slotting Series, Model VNFG (System Bar)	Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)	Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)	Multi-Functional / End Face Grooving Holder KFMS Type	Multi-Functional / End Face Grooving Holder KFMS-8 Type	Multi-Functional / End Face Grooving Holder Compatible Tip	Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type
From	₹ 16,231.13	₹ 32,603.87	₹ 34,146.85	₹ 28,757.15	₹ 31,240.38	₹ 31,773.45	₹ 46,011.22	₹ 28,757.15	₹ 16,811.13	₹ 13,015.93	₹ 15,004.24	₹ 8,225.56	₹ 8,746.60	₹ 11,831.22	₹ 14,745.75	₹ 13,774.67	₹ 11,831.22	₹ 11,831.22	₹ 16,953.05	₹ 11,213.76	₹ 14,568.95	₹ 14,215.35	₹ 11,058.93	₹ 11,058.93	₹ 671.93	₹ 11,482.60	₹ 10,002.29	₹ 1,655.04	₹ 2,734.58	₹ 967.93	₹ 13,570.29	₹ 12,350.09	₹ 12,350.09	₹ 36,741.80	₹ 1,183.56	₹ 25,192.20	₹ 1,877.38	₹ 3,088.62	₹ 3,082.84	₹ 18,232.71	₹ 8,692.22	₹ 17,730.44	₹ 19,021.62	₹ 1,302.78	₹ 18,591.67
Days to Ship	6 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	8 Day(s) or more	5 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	5 Day(s) or more	9 Day(s) or more
Application	Edge surface grooving	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Cutting off / Profiling	Edge surface grooving / Cutting off	Inner Diameter Grooving	Edge surface grooving / Horizontal feeding	Edge surface grooving	Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving	Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off / Horizontal feeding	Outer Diameter Grooving / Cutting off / Horizontal feeding	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Edge surface grooving	-	-	-
Groove Width(mm)	3 ～ 6	-	0.5-3.18	3	2 ～ 6	-	-	2.5 ～ 6	-	-	2	1～1.45	0.5–2.0	1.2 ～ 3	1.2 ～ 1.6	3 ～ 3.1	2.2/2.4 ～ 4.1	2 ～ 6	4	1.0/1.5 ～ 1.4	1.0 2.0 2.2 ～ 6.0/6.3	3 ～ 6	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	4	-	-	-
Maximum Groove Depth(mm)	3.5 ～ 8	-	6.4	8.69	15 ～ 60	-	-	12 ～ 18	-	-	20	2	-	-	-	-	-	-	-	-	-	12 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	-	-	Right-hand	Left-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand	No-hand	No-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Left-hand	Right-hand / Left-hand	No-hand	Right-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand	Right-hand	Left-hand	Right-hand	Right-hand	Right-hand	No-hand	Right-hand
Maximum Machining Diameter(mm)	-	-	1	35	-	-	-	44 ～ 1000	-	-	-	-	5~16	18 ～ 100	18 ～ 35	35 ～ 52	40 ～ 100	50 ～ 160	56	18 ～ 25.4	35 ～ 76	24 ～ 60	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50	-	-	-
Number of corners for tip use	2 Corner	2 Corner	3 Corner	1 Corner	1 Corner	2 Corner	-	2 Corner	-	-	2 Corner	3 Corner	2 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	2 Corner	2 Corner	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank height(mm)	16 ～ 25	16	10	-	-	-	-	-	-	-	25	20	10	19 ～ 32	8 ～ 14	16 ～ 20	19 ～ 32	-	25	10 ～ 20	10 ～ 25	12 ～ 32	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20	-	-	-

Loading...