Grooving / Cutting Off Holders（Selfishly：Right-hand）

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBA Type

  KYOCERA

  [Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 10,199.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Plunging/Grooving Shank Bit

  SANDVIK

  A parting-off and grooving tool that improves part production capacity by realizing high productivity and long tool lifespan

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	2.5 ～ 3	20	Right-hand	-	1 Corner	16 ～ 32

  From: ₹ 16,231.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)

  KYOCERA

  T dimension: Shows the machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 2,443.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chip for Grooving

  KYOCERA

  The edge width tolerance of GB32$050 is different. (0.50 + 0.05 0)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 1,259.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  CoroCut 1/2 Plunging/Grooving Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	1.5 ～ 15	8 ～ 50	Right-hand	-	1 Corner / 2 Corner	10 ～ 40

  From: ₹ 15,513.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

  KYOCERA

  If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 12,201.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE Type Compatible Chip

  KYOCERA

  B dimension: Indicates machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 1,496.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip (For Small Diameters) TKF Type

  KYOCERA

  [Features]
  · Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 1,819.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBAS Type

  KYOCERA

  A lever-lock type outer diameter shallow grooving holder.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 11,058.93
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 13,240.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Bit Compatible Bit

  KYOCERA

  B dimension: Indicates machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 2,407.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Plunging/Grooving Boring Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	4 ～ 6	10 ～ 13	Right-hand	-	2 Corner	30 ～ 47

  From: ₹ 42,214.04
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Boring Tool Bit For Profiling R/LAX123

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Edge surface grooving / Profiling	6 ～ 8	25	Right-hand	-	2 Corner	37

  From: ₹ 50,484.78
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 1,218.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Boring Tool Bit R/LAG 123 Cylindrical Shank

  SANDVIK

  [Features]
  A high clamp rigidity type boring tool bit for inner-diameter grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For inner-diameter grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	1.5 ～ 5	4.5 ～ 8	Right-hand	-	2 Corner	-

  From: ₹ 24,061.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Face Grooving, Screw Clamp, R/LG123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for face grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	4 ～ 8	13 ～ 20	Right-hand	-	2 Corner	25

  From: ₹ 23,943.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions

  ISCAR

  [Features]
  Integrated tongue grip holder for parting using a newly developed clamping method

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding	1.0 2.0 2.2 ～ 6.0/6.3	-	Right-hand	35 ～ 76	2 Corner	10 ～ 25

  From: ₹ 14,568.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23

  SANDVIK

  Sandvik Grooving/Cut-Off Holder T-Max Q-Cut Coromant Capto Cutting Unit CR/LF151.23

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	2 ～ 5	15 ～ 60	Right-hand	-	1 Corner	-

  From: ₹ 31,240.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Shank Tool Bit For Machining Outer Diameters MB-R/L

  SANDVIK

  High-precision tools for grooving, face grooving, profiling and pre-parting off.
  [Features]
  ·The cutting edge of the insert is sharp and coated with a thin film, making it a stable tool ideal for internal machining.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Edge surface grooving	1.5	-	Right-hand	-	1 Corner	12 ～ 25

  From: ₹ 14,333.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Head For Grooving End Surfaces 570

  SANDVIK

  Versatile shank bit for face grooving with 1-corner and 2-corner specifications

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Cutting off	-	-	Right-hand	-	2 Corner	-

  From: ₹ 31,773.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Adapter (Cylindrical Shank) Carbide Tool Bit, Internally Lubricated, MB-E-R

  SANDVIK

  Allows quick tool and insert setup for internal machining of high-precision parts

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving	-	-	Right-hand	-	-	-

  From: ₹ 46,011.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Small Diameter Perforating Bit, SCT Type

  SUMITOMO ELECTRIC HARDMETAL

  Use of screw-fastening clamp method enables insert replacement merely by loosening the screw

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	0.5–2.0	-	Right-hand	5~16	2 Corner	10

  From: ₹ 8,746.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes

  ISCAR

  Integrated holder for parting off
  General purpose, for CNC lathes (JETCUT), for automatic lathes

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.2 ～ 1.6	-	Right-hand	18 ～ 35	1 Corner	8 ～ 14

  From: ₹ 14,745.75
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)

  ISCAR

  Diagonal screw clamp system achieves high rigidity and retention.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.0/1.5 ～ 1.4	-	Right-hand	18 ～ 25.4	1 Corner	10 ～ 20

  From: ₹ 11,213.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.
  For outer diameter relief cut grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 13,570.29
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Blade KGDF Type

  KYOCERA

  [Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 8,827.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punching Blade KTKB-S Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 21,857.62
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Holding System for CoroCut XS Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	0.7-2.0	-	Right-hand	-	2 Corner	10 ～ 16

  From: ₹ 12,408.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Shank Bit for End Surface Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	4 ～ 5	8.7 ～ 10.7	Right-hand	-	1 Corner	25

  From: ₹ 19,791.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  T-Max Q-Cut Shank Bit for Plunging/Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 4	10 ～ 22	Right-hand	-	1 Corner	10 ～ 25

  From: ₹ 16,231.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	2.5 ～ 6	12 ～ 18	Right-hand	44 ～ 1000	2 Corner	-

  From: ₹ 28,757.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Profiling	10 ～ 12	20 ～ 35	Right-hand	-	1 Corner	-

  From: ₹ 55,739.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Face Grooving

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for face grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	3 ～ 8	13 ～ 28	Right-hand	-	2 Corner	25

  From: ₹ 18,927.33
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LG123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	3	3.5	Right-hand	-	2 Corner	16 ～ 20

  From: ₹ 16,231.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5 ～ 3	-	Right-hand	-	2 Corner	10 ～ 16

  From: ₹ 16,857.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max, Q-Cut, Flange Grooving, 570-32R/L151.3-024/-023/A/B

  SANDVIK

  Parting and grooving tools that improve part production capacity by realizing high productivity and long tool life

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	3	8.69	Right-hand	35	1 Corner	-

  From: ₹ 28,757.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L

  SANDVIK

  Sandvik Grooving/cutting off holder T-Max Q-Cut SL (Type 151.3) Internal grooving, profiling blade 570-R/L

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	6 ～ 8	10 ～ 13	Right-hand	-	1 Corner	-

  From: ₹ 25,334.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  The holder strength is high thanks to the jaw.
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 4	17 ～ 22	Right-hand	-	2 Corner	20 ～ 25

  From: ₹ 18,604.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LF123

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	6	22	Right-hand	-	2 Corner	25

  From: ₹ 19,791.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LX123-007

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	8	25	Right-hand	-	2 Corner	25 ～ 32

  From: ₹ 25,130.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut SL Blade For Face Grooving, Screw Clamp, 570-R/L123-B

  SANDVIK

  [Features]
  A high clamp rigidity type cutting head for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	2.5 ～ 6	12 ～ 18	Right-hand	56 ～ 1000	2 Corner	-

  From: ₹ 28,757.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Min Cut Tool For End Face Grooving (Holder) MIFHR

  ISCAR

  [Features]
  · Includes a coolant hole for appropriate internal lubrication
  · Good chip discharge
  · Also usable as a rotary tool

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	Right-hand	-	-	-

  From: ₹ 23,293.75
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type

  SUMITOMO ELECTRIC HARDMETAL

  Highly rigid design suppresses vibrations when cutting. Ideal for grooving, deep grooving, and cutting off.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2	20	Right-hand	-	2 Corner	25

  From: ₹ 15,004.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (F Cut) Blade for Plunging, Integrated Holder, for General Purpose Lathe, Strengthened Type

  ISCAR

  [Applications]
  Used for parting off and deep grooving of steel materials on general purpose lathe.
  [Features]
  Integrated self-grip holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	3 ～ 3.1	-	Right-hand	35 ～ 52	1 Corner	16 ～ 20

  From: ₹ 13,774.67
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type

  ISCAR

  [Applications]
  Used for parting and grooving steel materials.
  [Features]
  Automatic lathe type and general purpose type are available.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2.2/2.4 ～ 4.8/5.1	-	Right-hand	28 ～ 75	1 Corner	10 ～ 25

  From: ₹ 13,067.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KYOCERA	SANDVIK	KYOCERA	KYOCERA	SANDVIK	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	KYOCERA	SANDVIK	SANDVIK	ISCAR	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	ISCAR	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR
Product Series	Outer Diameter Shallow Groove Holder KGBA Type	T-Max Q-Cut Plunging/Grooving Shank Bit	Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)	Chip for Grooving	CoroCut 1/2 Plunging/Grooving Shank Bit	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Inner Diameter Groove SIGE Type Compatible Chip	Slit Tip (For Small Diameters) TKF Type	Outer Diameter Shallow Groove Holder KGBAS Type	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Lathe Turning Bit Compatible Bit	CoroCut 1/2 Plunging/Grooving Boring Bit	CoroCut 1/2 Boring Tool Bit For Profiling R/LAX123	Lathe Turning/Cutting (Multi-Function) Bit GMM Model	CoroCut 1/2 Boring Tool Bit R/LAG 123 Cylindrical Shank	CoroCut 1/2 Shank Tool Bit For Face Grooving, Screw Clamp, R/LG123	Do-Grip Integrated Holder for Cutting Protrusions	T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23	CoroCut MB Shank Tool Bit For Machining Outer Diameters MB-R/L	CoroCut 1/2 Head For Grooving End Surfaces 570	CoroCut MB Adapter (Cylindrical Shank) Carbide Tool Bit, Internally Lubricated, MB-E-R	SEC-Small Diameter Perforating Bit, SCT Type	Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes	Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)	Grooved End Face Blade KGDF Type	Punching Blade KTKB-S Type	QS Holding System for CoroCut XS Bit	T-Max Q-Cut Shank Bit for End Surface Grooving	T-Max Q-Cut Shank Bit for Plunging/Grooving	CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2	CORO-TURN SL70, HP Cutting Head	CoroCut 1/2 Shank Tool Bit For Face Grooving	CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LG123	Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123	T-Max, Q-Cut, Flange Grooving, 570-32R/L151.3-024/-023/A/B	T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L	CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123	CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LF123	CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LX123-007	CoroCut SL Blade For Face Grooving, Screw Clamp, 570-R/L123-B	Min Cut Tool For End Face Grooving (Holder) MIFHR	SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type	Self Grip (F Cut) Blade for Plunging, Integrated Holder, for General Purpose Lathe, Strengthened Type	Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type
From	₹ 10,199.04	₹ 16,231.13	₹ 2,443.02	₹ 1,259.91	₹ 15,513.22	₹ 12,201.93	₹ 1,496.98	₹ 1,819.78	₹ 11,058.93	₹ 13,240.80	₹ 2,407.78	₹ 42,214.04	₹ 50,484.78	₹ 1,218.40	₹ 24,061.22	₹ 23,943.36	₹ 14,568.95	₹ 31,240.38	₹ 14,333.20	₹ 31,773.45	₹ 46,011.22	₹ 8,746.60	₹ 14,745.75	₹ 11,213.76	₹ 13,570.29	₹ 8,827.91	₹ 21,857.62	₹ 12,408.49	₹ 19,791.24	₹ 16,231.13	₹ 28,757.15	₹ 55,739.24	₹ 18,927.33	₹ 16,231.13	₹ 16,857.96	₹ 28,757.15	₹ 25,334.56	₹ 18,604.53	₹ 19,791.24	₹ 25,130.05	₹ 28,757.15	₹ 23,293.75	₹ 15,004.24	₹ 13,774.67	₹ 13,067.47
Days to Ship	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more
Application	-	Outer Diameter Grooving / Cutting off / Profiling	-	-	Outer Diameter Grooving / Cutting off / Profiling	-	-	-	-	-	-	Inner Diameter Grooving / Profiling	Inner Diameter Grooving / Edge surface grooving / Profiling	-	Inner Diameter Grooving / Profiling	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Cutting off / Horizontal feeding	Outer Diameter Grooving / Cutting off / Profiling	Outer Diameter Grooving / Edge surface grooving	Edge surface grooving / Cutting off	Inner Diameter Grooving	Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	-	-	-	Outer Diameter Grooving / Cutting off	Edge surface grooving	Outer Diameter Grooving / Cutting off	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Profiling	Edge surface grooving / Horizontal feeding	Edge surface grooving	Outer Diameter Grooving / Cutting off	Edge surface grooving / Horizontal feeding	Inner Diameter Grooving / Profiling	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Horizontal feeding / Profiling	Outer Diameter Grooving / Horizontal feeding / Profiling	Edge surface grooving / Horizontal feeding	Edge surface grooving	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off
Groove Width(mm)	-	2.5 ～ 3	-	-	1.5 ～ 15	-	-	-	-	-	-	4 ～ 6	6 ～ 8	-	1.5 ～ 5	4 ～ 8	1.0 2.0 2.2 ～ 6.0/6.3	2 ～ 5	1.5	-	-	0.5–2.0	1.2 ～ 1.6	1.0/1.5 ～ 1.4	-	-	-	0.7-2.0	4 ～ 5	2 ～ 4	2.5 ～ 6	10 ～ 12	3 ～ 8	3	1.5 ～ 3	3	6 ～ 8	2 ～ 4	6	8	2.5 ～ 6	-	2	3 ～ 3.1	2.2/2.4 ～ 4.8/5.1
Maximum Groove Depth(mm)	-	20	-	-	8 ～ 50	-	-	-	-	-	-	10 ～ 13	25	-	4.5 ～ 8	13 ～ 20	-	15 ～ 60	-	-	-	-	-	-	-	-	-	-	8.7 ～ 10.7	10 ～ 22	12 ～ 18	20 ～ 35	13 ～ 28	3.5	-	8.69	10 ～ 13	17 ～ 22	22	25	12 ～ 18	-	20	-	-
Selfishly	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	35 ～ 76	-	-	-	-	5~16	18 ～ 35	18 ～ 25.4	-	-	-	-	-	-	44 ～ 1000	-	-	-	-	35	-	-	-	-	56 ～ 1000	-	-	35 ～ 52	28 ～ 75
Number of corners for tip use	-	1 Corner	-	-	1 Corner / 2 Corner	-	-	-	-	-	-	2 Corner	2 Corner	-	2 Corner	2 Corner	2 Corner	1 Corner	1 Corner	2 Corner	-	2 Corner	1 Corner	1 Corner	-	-	-	2 Corner	1 Corner	1 Corner	2 Corner	1 Corner	2 Corner	2 Corner	2 Corner	1 Corner	1 Corner	2 Corner	2 Corner	2 Corner	2 Corner	-	2 Corner	1 Corner	1 Corner
Shank height(mm)	-	16 ～ 32	-	-	10 ～ 40	-	-	-	-	-	-	30 ～ 47	37	-	-	25	10 ～ 25	-	12 ～ 25	-	-	10	8 ～ 14	10 ～ 20	-	-	-	10 ～ 16	25	10 ～ 25	-	-	25	16 ～ 20	10 ～ 16	-	-	20 ～ 25	25	25 ～ 32	-	-	25	16 ～ 20	10 ～ 25

Loading...