Grooving / Cutting Off Holders（Application：Outer Diameter Grooving）

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Plunging/Grooving Shank Bit

  SANDVIK

  A parting-off and grooving tool that improves part production capacity by realizing high productivity and long tool lifespan

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2 ～ 6	15 ～ 32	Right-hand / Left-hand	-	1 Corner	16 ～ 32

  From: ₹ 16,231.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  CoroCut 1/2 Plunging/Grooving Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5 ～ 15	8 ～ 50	Right-hand / Left-hand / No-hand	-	1 Corner / 2 Corner	10 ～ 40

  From: ₹ 15,513.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions

  ISCAR

  [Features]
  Integrated tongue grip holder for parting using a newly developed clamping method

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.0 2.0 2.2 ～ 6.0/6.3	-	Right-hand / Left-hand	35 ～ 76	2 Corner	10 ～ 25

  From: ₹ 14,568.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23

  SANDVIK

  Sandvik Grooving/Cut-Off Holder T-Max Q-Cut Coromant Capto Cutting Unit CR/LF151.23

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2 ～ 6	15 ～ 60	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 31,240.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Shank Tool Bit For Machining Outer Diameters MB-R/L

  SANDVIK

  High-precision tools for grooving, face grooving, profiling and pre-parting off.
  [Features]
  ·The cutting edge of the insert is sharp and coated with a thin film, making it a stable tool ideal for internal machining.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5	-	Right-hand / Left-hand	-	1 Corner	12 ～ 25

  From: ₹ 14,333.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type

  SUMITOMO ELECTRIC HARDMETAL

  High rigidity with double clamp (screw-on type for mini turning tools). The triangular type allows 3 corners to be used.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1～1.45	2	Left-hand	-	3 Corner	20

  From: ₹ 8,225.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (F Cut) Blade for Plunging

  ISCAR

  [Features]
  F-cut type blade.
  [Applications]
  Suitable for parting-off and deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.2 ～ 3	-	No-hand	18 ～ 100	1 Corner	19 ～ 32

  From: ₹ 11,831.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes

  ISCAR

  Integrated holder for parting off
  General purpose, for CNC lathes (JETCUT), for automatic lathes

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.2 ～ 1.6	-	Right-hand / Left-hand	18 ～ 35	1 Corner	8 ～ 14

  From: ₹ 14,745.75
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)

  ISCAR

  Diagonal screw clamp system achieves high rigidity and retention.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.0/1.5 ～ 1.4	-	Right-hand / Left-hand	18 ～ 25.4	1 Corner	10 ～ 20

  From: ₹ 11,213.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Holding System for CoroCut XS Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	0.7-2.0	-	Right-hand / Left-hand	-	2 Corner	10 ～ 16

  From: ₹ 12,408.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  T-Max Q-Cut Shank Bit for Plunging/Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2 ～ 4	6 ～ 22	Right-hand / Left-hand	-	1 Corner	8 ～ 25

  From: ₹ 15,513.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	10 ～ 12	20 ～ 35	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 55,739.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5 ～ 3	-	Right-hand / Left-hand	-	2 Corner	10 ～ 16

  From: ₹ 16,857.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  The holder strength is high thanks to the jaw.
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2 ～ 4	17 ～ 22	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: ₹ 18,604.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LF123

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	6	22	Right-hand / Left-hand	-	2 Corner	25

  From: ₹ 19,791.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LX123-007

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	6 ～ 8	25	Right-hand / Left-hand	-	2 Corner	25 ～ 32

  From: ₹ 23,996.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type

  SUMITOMO ELECTRIC HARDMETAL

  Highly rigid design suppresses vibrations when cutting. Ideal for grooving, deep grooving, and cutting off.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2	20	Right-hand	-	2 Corner	25

  From: ₹ 15,004.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (F Cut) Blade for Plunging, Integrated Holder, for General Purpose Lathe, Strengthened Type

  ISCAR

  [Applications]
  Used for parting off and deep grooving of steel materials on general purpose lathe.
  [Features]
  Integrated self-grip holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 3.1	-	Right-hand	35 ～ 52	1 Corner	16 ～ 20

  From: ₹ 13,774.67
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (T Cut) Blade for Plunging

  ISCAR

  When using T cut, the F cut and DO GRIP are recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2.2/2.4 ～ 4.1	-	No-hand	40 ～ 100	1 Corner	19 ～ 32

  From: ₹ 11,831.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type

  ISCAR

  [Applications]
  Used for parting and grooving steel materials.
  [Features]
  Automatic lathe type and general purpose type are available.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2.2/2.4 ～ 4.8/5.1	-	Right-hand / Left-hand	28 ～ 75	1 Corner	10 ～ 25

  From: ₹ 13,067.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tang Grip, Blade for Cutting Protrusions and Grooving

  ISCAR

  [Features]
  Blade for parting and grooving
  This is the latest chip cutting-off tool with vertical inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2 ～ 6	-	No-hand	50 ～ 160	1 Corner	-

  From: ₹ 11,831.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tang Grip, Integrated Holder for Cutting Protrusions and Grooving

  ISCAR

  [Features]
  Integrated tongue grip holder for parting and grooving
  This is the latest chip cutting-off tool with vertical inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	4	-	Right-hand	56	1 Corner	25

  From: ₹ 16,953.05
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HELI GRIP, Outer Diameter Machining Integrated Holder

  ISCAR

  [Applications]
  Used for cutting off, deep grooving, turning and enlarging of outer diameters.
  [Features]
  Heli-grip holder integrated with tip.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 6	12 ～ 30	Right-hand / Left-hand	24 ～ 60	2 Corner	12 ～ 32

  From: ₹ 14,215.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Plunging Blade

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5 ～ 6	15 ～ 55	No-hand	-	2 Corner	25.9 ～ 31.9

  From: ₹ 15,874.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Profile Machining Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	4 ～ 6	4 ～ 5	Right-hand / Left-hand	-	2 Corner	20 ～ 32

  From: ₹ 21,513.69
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 3 Plunging/Grooving Shank Bit

  SANDVIK

  3-corner specification, demonstrating high productivity in shallow parting-off and grooving, single holder supports all insert widths

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5	6.4	Right-hand / Left-hand	-	3 Corner	32

  From: ₹ 21,332.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5 ～ 3	12 ～ 18	Left-hand	-	2 Corner	-

  From: ₹ 17,061.55
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head for Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 15	15 ～ 65	Right-hand / Left-hand	-	1 Corner / 2 Corner	-

  From: ₹ 55,739.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COROMANT CAPTO, Cutting Unit for CoroCut 1 & 2

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	4 ～ 6	20 ～ 25	No-hand	-	2 Corner	-

  From: ₹ 31,240.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut, Q Cut, Blade/Adapter

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2 ～ 15	20 ～ 120	Right-hand / Left-hand	-	1 Corner / 2 Corner	25.9 ～ 101.6

  From: ₹ 17,996.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LF123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 6	4.5 ～ 8	Right-hand / Left-hand	-	2 Corner	16 ～ 25

  From: ₹ 16,231.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070

  SANDVIK

  Versatile 1-corner and 2-corner shank tool bit for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	6	25	No-hand	-	2 Corner	25 ～ 32

  From: ₹ 19,791.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, High Accuracy Coolant Jet Parting/Grooving Tool QS-R/LF

  SANDVIK

  Sandvik Grooving/Cut-Off Holder Short Bit for QS Holding System High Precision Coolant Jet QS-R/LF

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	0.5-3.18 ～ 0.5 to 3.18	6.4	Right-hand / Left-hand	1	3 Corner	10 ～ 16

  From: ₹ 16,857.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Series, Short Tool Bit, QS-SMALR/L1616E3HP

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	-	-	Right-hand / Left-hand	-	2 Corner	16

  From: ₹ 32,603.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	0.5-3.18	6.4	Left-hand	1	3 Corner	10

  From: ₹ 34,146.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	-	-	Left-hand	-	3 Corner	10 ～ 16

  From: ₹ 16,857.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 3 SL Blade Screw Clamp For Shallow Cut-Off Machining 570-R/L 123 U/T

  SANDVIK

  3 corners, high productivity for shallow parting, one holder for all insert widths

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5	6.4	Right-hand / Left-hand	-	3 Corner	-

  From: ₹ 16,231.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Coromant Capto Cutting Unit, Screw Clamp, C-R/LF123

  SANDVIK

  [Features]
  A high clamp rigidity type cutting head for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	1.5 ～ 8	8 ～ 25	Right-hand / Left-hand	-	2 Corner	-

  From: ₹ 31,240.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Profiling, Screw Clamp, R/LX123-070

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for profiling.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For profiling.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	6	16	Right-hand / Left-hand	-	2 Corner	25 ～ 32

  From: ₹ 25,130.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut SL Blade Screw Clamp For Fluting And End Surface Grooving 570-R/L123-C

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 6	3.5 ～ 4.5	Right-hand / Left-hand	-	2 Corner	-

  From: ₹ 15,513.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut XS SL 570-R/LSMAL

  SANDVIK

  Versatile small part machining system for outer diameter machining
  Extremely sharp cutting edge with excellent performance at low feed

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	-	8.2	Right-hand / Left-hand	-	-	-

  From: ₹ 16,231.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL T-Max Q-Cut SL Blade For Grooving And Cut-Off 570-R/L151.21

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	2	20 ～ 32	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 14,477.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL70, Cutting Head, Coupling, Round Inserts, SL70-CRDCR/L-09

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	9	18 ～ 50	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 46,366.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL70, Cutting Head, Coupling, Round Inserts, SL70-CRSCR/L-35-09

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	9	35	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 46,366.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit Screw Clamp For Ceramic Grooving And Profiling Inserts R/LF150.23

  SANDVIK

  Sandvik Grooving/Parting Off Holder Ceramic Grooving and Profiling Insert Bit Screw Clamp R/LF150.23

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3.17 ～ 6.35	19 ～ 29	Right-hand / Left-hand	-	1 Corner	32

  From: ₹ 20,065.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	SANDVIK	ISCAR	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR	ISCAR	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	T-Max Q-Cut Plunging/Grooving Shank Bit	CoroCut 1/2 Plunging/Grooving Shank Bit	Do-Grip Integrated Holder for Cutting Protrusions	T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23	CoroCut MB Shank Tool Bit For Machining Outer Diameters MB-R/L	SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type	Self Grip (F Cut) Blade for Plunging	Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes	Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)	QS Holding System for CoroCut XS Bit	T-Max Q-Cut Shank Bit for Plunging/Grooving	CORO-TURN SL70, HP Cutting Head	Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123	CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123	CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LF123	CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LX123-007	SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type	Self Grip (F Cut) Blade for Plunging, Integrated Holder, for General Purpose Lathe, Strengthened Type	Self Grip (T Cut) Blade for Plunging	Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type	Tang Grip, Blade for Cutting Protrusions and Grooving	Tang Grip, Integrated Holder for Cutting Protrusions and Grooving	HELI GRIP, Outer Diameter Machining Integrated Holder	CoroCut 1/2 Plunging Blade	CoroCut 1/2 Profile Machining Shank Bit	CoroCut 3 Plunging/Grooving Shank Bit	CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2	CORO-TURN SL70, HP Cutting Head for Grooving	COROMANT CAPTO, Cutting Unit for CoroCut 1 & 2	CoroCut, Q Cut, Blade/Adapter	CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LF123	CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070	Short Tool Bit For QS Holding System, High Accuracy Coolant Jet Parting/Grooving Tool QS-R/LF	QS Series, Short Tool Bit, QS-SMALR/L1616E3HP	Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF	Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123	CoroCut 3 SL Blade Screw Clamp For Shallow Cut-Off Machining 570-R/L 123 U/T	CoroCut 1/2 Coromant Capto Cutting Unit, Screw Clamp, C-R/LF123	CoroCut 1/2 Shank Tool Bit For Profiling, Screw Clamp, R/LX123-070	CoroCut SL Blade Screw Clamp For Fluting And End Surface Grooving 570-R/L123-C	CoroCut XS SL 570-R/LSMAL	CoroTurn SL T-Max Q-Cut SL Blade For Grooving And Cut-Off 570-R/L151.21	CoroTurn SL70, Cutting Head, Coupling, Round Inserts, SL70-CRDCR/L-09	CoroTurn SL70, Cutting Head, Coupling, Round Inserts, SL70-CRSCR/L-35-09	Tool Bit Screw Clamp For Ceramic Grooving And Profiling Inserts R/LF150.23
From	₹ 16,231.13	₹ 15,513.22	₹ 14,568.95	₹ 31,240.38	₹ 14,333.20	₹ 8,225.56	₹ 11,831.22	₹ 14,745.75	₹ 11,213.76	₹ 12,408.49	₹ 15,513.22	₹ 55,739.24	₹ 16,857.96	₹ 18,604.53	₹ 19,791.24	₹ 23,996.93	₹ 15,004.24	₹ 13,774.67	₹ 11,831.22	₹ 13,067.47	₹ 11,831.22	₹ 16,953.05	₹ 14,215.35	₹ 15,874.85	₹ 21,513.69	₹ 21,332.87	₹ 17,061.55	₹ 55,739.24	₹ 31,240.38	₹ 17,996.45	₹ 16,231.13	₹ 19,791.24	₹ 16,857.96	₹ 32,603.87	₹ 34,146.85	₹ 16,857.96	₹ 16,231.13	₹ 31,240.38	₹ 25,130.05	₹ 15,513.22	₹ 16,231.13	₹ 14,477.85	₹ 46,366.15	₹ 46,366.15	₹ 20,065.82
Days to Ship	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more
Application	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving
Groove Width(mm)	2 ～ 6	1.5 ～ 15	1.0 2.0 2.2 ～ 6.0/6.3	2 ～ 6	1.5	1～1.45	1.2 ～ 3	1.2 ～ 1.6	1.0/1.5 ～ 1.4	0.7-2.0	2 ～ 4	10 ～ 12	1.5 ～ 3	2 ～ 4	6	6 ～ 8	2	3 ～ 3.1	2.2/2.4 ～ 4.1	2.2/2.4 ～ 4.8/5.1	2 ～ 6	4	3 ～ 6	1.5 ～ 6	4 ～ 6	1.5	1.5 ～ 3	3 ～ 15	4 ～ 6	2 ～ 15	3 ～ 6	6	0.5-3.18 ～ 0.5 to 3.18	-	0.5-3.18	-	1.5	1.5 ～ 8	6	3 ～ 6	-	2	9	9	3.17 ～ 6.35
Maximum Groove Depth(mm)	15 ～ 32	8 ～ 50	-	15 ～ 60	-	2	-	-	-	-	6 ～ 22	20 ～ 35	-	17 ～ 22	22	25	20	-	-	-	-	-	12 ～ 30	15 ～ 55	4 ～ 5	6.4	12 ～ 18	15 ～ 65	20 ～ 25	20 ～ 120	4.5 ～ 8	25	6.4	-	6.4	-	6.4	8 ～ 25	16	3.5 ～ 4.5	8.2	20 ～ 32	18 ～ 50	35	19 ～ 29
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Maximum Machining Diameter(mm)	-	-	35 ～ 76	-	-	-	18 ～ 100	18 ～ 35	18 ～ 25.4	-	-	-	-	-	-	-	-	35 ～ 52	40 ～ 100	28 ～ 75	50 ～ 160	56	24 ～ 60	-	-	-	-	-	-	-	-	-	1	-	1	-	-	-	-	-	-	-	-	-	-
Number of corners for tip use	1 Corner	1 Corner / 2 Corner	2 Corner	1 Corner	1 Corner	3 Corner	1 Corner	1 Corner	1 Corner	2 Corner	1 Corner	1 Corner	2 Corner	2 Corner	2 Corner	2 Corner	2 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	2 Corner	2 Corner	2 Corner	3 Corner	2 Corner	1 Corner / 2 Corner	2 Corner	1 Corner / 2 Corner	2 Corner	2 Corner	3 Corner	2 Corner	3 Corner	3 Corner	3 Corner	2 Corner	2 Corner	2 Corner	-	1 Corner	1 Corner	1 Corner	1 Corner
Shank height(mm)	16 ～ 32	10 ～ 40	10 ～ 25	-	12 ～ 25	20	19 ～ 32	8 ～ 14	10 ～ 20	10 ～ 16	8 ～ 25	-	10 ～ 16	20 ～ 25	25	25 ～ 32	25	16 ～ 20	19 ～ 32	10 ～ 25	-	25	12 ～ 32	25.9 ～ 31.9	20 ～ 32	32	-	-	-	25.9 ～ 101.6	16 ～ 25	25 ～ 32	10 ～ 16	16	10	10 ～ 16	-	-	25 ～ 32	-	-	-	-	-	32

Loading...