Holding Tools for I.D. Tuning

• You can add up to 6 items per a category to the compare list. Compare

  

  EWN Boring Head Set (For Finishing / Insert Holder Type)

  BIG DAISHOWA SEIKI

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Features]
  ·A 1 micron vernier is added to the easy-to-read scale of 0.01 mm/⌀.
  ·The pre-balanced design achieves stable machining accuracy.
  ·Back boring can be standardized, expanding the range of use.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 100	Internal Diameter	-	-	-	-	-	-	Available

  From: ₹ 50,246.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn XS Insert Bar for Turning CXS-..T098

  SANDVIK

  [Features]
  CoroTurn XS, Insert Bar
  Coating Carbide
  Boring Bar for Small Diameter Machining
  For lathe turning

  • Volume Discount

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	0.3 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	27.25 ～ 72.25	-	4 ～ 7	-	NA

  From: ₹ 3,570.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Holder For EWN Boring Head Replacement

  BIG DAISHOWA SEIKI

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Features]
  Combining the head and insert holder makes it possible to secure a cutting chip pocket.
  Designed for improved cutting chip discharge.
  For EWN head

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	-	-	-	-	-	-	-

  From: ₹ 6,877.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max U Fine Boring Unit

  SANDVIK

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand / Left-hand	-	24.1 ～ 62.7	-	16 ～ 32	-	NA

  From: ₹ 55,245.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°

  SANDVIK

  [Features]
  An interchangeable-head-type cutting head for inner-diameter turning.
  The low cutting resistance ensures stable machining operations.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	20 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-	Available

  From: ₹ 31,062.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Bar Sleeve

  KYOCERA

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	70	-	-	-	-

  From: ₹ 22,407.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	25 ～ 50	Internal Diameter	Right-hand / Left-hand	-	32 ～ 55	-	-	-	NA

  From: ₹ 21,307.44
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EW Micro Head

  BIG DAISHOWA SEIKI

  [Features]
  · Microminiaturized, using the popular φ0.01 mm scale adjustment mechanism.
  · Adjustment with only micro-quill eccentricity preserves high speed capability.
  · Carbide solid straight shank enables high-rigidity machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	15 ～ 18	Internal Diameter	-	-	144 ～ 204	-	14 ～ 16	100 ～ 160	Available

  From: ₹ 72,883.93
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EZH-ST Sleeve

  KYOCERA

  Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	80 ～ 135	-	-	-	-

  From: ₹ 9,832.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: non-ISO standard, screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	1 ～ 4	Internal Diameter	Right-hand	-	26.5 ～ 39.8	-	-	-	-

  From: ₹ 1,898.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VNB Type (inner diameter machined)

  KYOCERA

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2 ～ 7	Internal Diameter	Right-hand	-	26.5 ～ 49.8	-	-	-	-

  From: ₹ 1,934.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	12 ～ 22	Internal Diameter	Right-hand	Screw-on	140 ～ 200	-	10 ～ 20	～5.5	Available

  From: ₹ 13,426.96
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Boring Tool Bit For Turning S..CTFPR/L

  SANDVIK

  A boring tool bit for turning that achieves high productivity, high quality, and high efficiency

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 mm ～ 32 mm	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Clamp-on	200 mm ～ 300 mm	11°	16 mm ～ 25 mm	32.5 – 64 mm ～ 49 – 100 mm	NA

  From: ₹ 16,429.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge CoroTurn 107 Screw Clamp STFCR/L

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 55	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	25 ～ 63	-	-	-	NA

  From: ₹ 20,621.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL70 HSK Solid Holder, 392.T

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Left-hand	-	-	-	-	-	Available

  From: ₹ 76,739.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC

  SANDVIK

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  First choice for large diameter fine boring
  Tool is radially adjustable to cover a wide diameter range with one tool
  Tools are micrometer-precisely adjustable to meet tight machining tolerances

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	19 ～ 136	Internal Diameter	-	Screw-on	-	-	-	-	Available

  From: ₹ 97,769.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Boring Head, Coromant Capto / HSK

  SANDVIK

  Sandvik Inner Diameter Holder Fine Boring Head Coromant Capto/HSK

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	3	Internal Diameter	-	-	-	-	12 ～ 20	-	Available / NA

  From: ₹ 145,677.19
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107 Positive Tip Carbide Boring Bit

  SANDVIK

  [Features]
  · A bit dedicated for deep hole boring, with an anti-vibration device for absorbing cutting vibration caused by the tool built into the bit.
  · Dynamic rigidity of the anti-vibration bit is greatly enhanced by the cutting vibration damping capability of the anti-vibration device inside the bit. Regular steel boring bar projection length limit is 4 times the tool diameter, but this allows the projection length to be extended to about 7 times.
  [Applications]
  · For inside turning of long protrusions.
  · To prevent chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	-	-	-	-	-

  From: ₹ 84,925.96
  Days to Ship: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  BSA CoroBore Boring Head

  MANYO TOOLS

  [Features]
  · A rough machining boring head used with a square bit mounted

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	50 ～ 130	Internal Diameter	-	-	-	-	16 ～ 42	-	-

  From: ₹ 17,036.55
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CK Boring System CK Shank (BBT Shank)

  BIG DAISHOWA SEIKI

  [Features]
  · Especially effective for machining deep holes and large diameters. Reduces vibration and deflection that affect the boring process.
  · BIG-PLUS (BBT Shank) tools can be used on both BIG-PLUS spindles and conventional BT spindles

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	-	-	-	-	-

  From: ₹ 30,055.45
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EWN Boring Head Set (For Finishing / Round Bit Type)

  BIG DAISHOWA SEIKI

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Features]
  ·A series of 3 types that allow you to choose the head suitable for processing.
  ·The micron-adjustable ultra-precision head enables difficult small-diameter boring.
  ·With a full lineup of carbide bit series, it is possible to quickly handle small-diameter deep hole drilling.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	1	Internal Diameter	-	-	-	-	-	-	Available

  From: ₹ 63,090.35
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for Inner Diameter Machining

  ISCAR

  [Features]A holder for inner diameter machining with a minimum machining diameter of 20 to 60 mm and an overhang length of 4.5 to 20 mm.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	20 ～ 65	Internal Diameter	Right-hand / Left-hand	Cable clamp	160 ～ 300	-	20 ～ 40	4.5 ～ 20	NA

  From: ₹ 26,841.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SVN-XN Type (Round Shank, Standard Type)

  KYOCERA

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: V (35° two-bolt); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	Right-hand	-	100	-	-	-	-

  From: ₹ 17,443.82
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	6 ～ 8	Internal Diameter	Right-hand / Left-hand	Screw-on	100	7°	10	～5.5	NA

  From: ₹ 12,101.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SDZC-AE Excellent Bar (Boring)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	23 ～ 32	Pull	Right-hand / Left-hand	Screw-on	180 ～ 250	7°	16 ～ 25	～5.5	Available

  From: ₹ 17,625.13
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	150 ～ 300	7°	12 ～ 25	18 ~ 48 ～ 100	Available

  From: ₹ 16,113.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge, CoroTurn 107 Screw Clamp, SSSCR/L

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	40 ～ 50	Internal Diameter	Right-hand / Left-hand	-	50.1 ～ 55.3	-	-	-	NA

  From: ₹ 20,621.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroBore 825

  SANDVIK

  First choice for large diameter fine boring
  Tool is radially adjustable to cover a wide diameter range with one tool
  Tools are micrometer-precisely adjustable to meet tight machining tolerances

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	-	-	-	-	Available

  From: ₹ 95,121.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Bar For Fine Boring Head, R429.90/R249U

  SANDVIK

  Boring bits for indexable fine boring heads that achieve high productivity

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	3 ～ 26	Internal Diameter	Right-hand	Pin Lock	-	-	12 ～ 20	-	Available

  From: ₹ 18,824.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Inner Diameter Boring Holder, A-DCLN Type

  KYOCERA

  [Features]·A-DCLN type: This is an inner diameter double clamp holder (strong clamping with a single action). ·Stable machining is achieved with flexible coolant holes. [Applications]·For boring bar, inner diameter, deep flange processing

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	Cable clamp	-	-	-	-	-

  From: ₹ 25,522.47
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BSB CoroBore Boring Head

  MANYO TOOLS

  [Features]
  · A rough machining boring head used with a square bit mounted

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	50 ～ 130	Internal Diameter	-	-	-	-	16 ～ 42	-	-

  From: ₹ 17,036.55
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SW Boring Head (Rough Highly Rigid Type)

  BIG DAISHOWA SEIKI

  [Applications]It can be used for dual contact BBT/BT shanks. [Features]It is a high stiffness type for roughing and can also be used for processing flat bearing surfaces.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	20 ～ 148	Internal Diameter	-	-	-	-	-	-	Available

  From: ₹ 23,097.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Face Grooving Blade SGFFH-R/L

  ISCAR

  [Features]A blade for flange grooving with a minimum machining diameter of 35 to 150 mm and an overhang length of 20 to 30 mm.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	35 ～ 150	Inner diameter profiling	Right-hand / Left-hand	Clamp-on	-	7°	-	20 ～ 35	NA

  From: ₹ 19,160.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for Inner Diameter Machining (with Hole for Cutting Oil) TGIR/L-C (Top Grip)

  ISCAR

  [Features]A holder for inner diameter machining with a minimum machining diameter of 20.5 to 57 mm and an overhang length of 5.5 to 17.5.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	20.5 ～ 57	Internal Diameter	Right-hand / Left-hand	Cable clamp	150 ～ 300	-	16 ～ 40	5.5 ～ 17.5	Available

  From: ₹ 23,751.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EZB-ST (Internal Diameter Processing)

  KYOCERA

  Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2.5 ～ 7.5	-	Right-hand	-	32 ～ 74.2	-	2 ～ 7	-	-

  From: ₹ 1,151.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SDZC-A Type Steel Bar (Draw Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	14 ～ 27	Pull	Right-hand / Left-hand	Screw-on	140 ～ 200	7°	10 ～ 20	Up to 4	NA

  From: ₹ 12,388.11
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Solid-Carbide Boring Tool Bit MB-E

  SANDVIK

  [Features]
  Holder for inner-diameter turning (bore cutting) of small parts.
  The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity.
  Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations.
  Minimum machining diameter: ø10 mm.
  For small inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	87.9 ～ 124.7	-	-	-	-

  From: ₹ 29,282.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	20 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	155.1 ～ 300	7°	16 ～ 25	18 ~ 48 ～ 100	Available

  From: ₹ 16,113.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR/L-X

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	22 ～ 50	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-	Available

  From: ₹ 31,062.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL Coromant Capto Dampened Boring Tool Bit, C-570-3C

  SANDVIK

  [Features]
  An interchangeable-head-type boring bit.
  Includes a dampening function, ensuring minimal chatter even with long protrusions.
  Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit.
  For inner-diameter turning of all types of work material.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	20 ～ 50	Internal Diameter	-	-	-	-	-	-	Available

  From: ₹ 131,790.02
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	-	-	Available

  From: ₹ 40,790.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DuoBore Cartridge Twin-Edge Boring Tool 391.68A

  SANDVIK

  Versatile tool for rough boring, slides can be individually adjusted both axially and radially

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	148	Internal Diameter	-	-	-	-	-	-	Available

  From: ₹ 27,686.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DuoBore Twin-Edge Boring Tool 391.68A

  SANDVIK

  Versatile tool for rough boring, slides can be individually adjusted both axially and radially

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape) / T (Triangle)	25 ～ 123	Internal Diameter	-	-	-	-	-	-	Available

  From: ₹ 29,894.29
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A-SVUBR/L

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22 ～ 27	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	200 ～ 250	5°	16 ～ 20	64 ～ 80	Available

  From: ₹ 16,113.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Speed Fine Boring Head

  SANDVIK

  HSK fine boring head adapter
  Flexible solution for a wide diameter range

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	-	-	-	-	-

  From: ₹ 218,485.31
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

Brand
Product Series
From
Days to Ship
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	BIG DAISHOWA SEIKI	SANDVIK	BIG DAISHOWA SEIKI	SANDVIK	SANDVIK	KYOCERA	SANDVIK	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	MANYO TOOLS	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	ISCAR	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	MANYO TOOLS	BIG DAISHOWA SEIKI	ISCAR	ISCAR	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	EWN Boring Head Set (For Finishing / Insert Holder Type)	CoroTurn XS Insert Bar for Turning CXS-..T098	Insert Holder For EWN Boring Head Replacement	T-Max U Fine Boring Unit	CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°	Boring Bar Sleeve	Cartridge	EW Micro Head	EZH-ST Sleeve	VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]	VNB Type (inner diameter machined)	A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	T-Max S Boring Tool Bit For Turning S..CTFPR/L	Cartridge CoroTurn 107 Screw Clamp STFCR/L	CoroTurn SL70 HSK Solid Holder, 392.T	CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC	Fine Boring Head, Coromant Capto / HSK	Sandvik CoroTurn 107 Positive Tip Carbide Boring Bit	BSA CoroBore Boring Head	CK Boring System CK Shank (BBT Shank)	EWN Boring Head Set (For Finishing / Round Bit Type)	Holder for Inner Diameter Machining	S...SVN-XN Type (Round Shank, Standard Type)	A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	A-SDZC-AE Excellent Bar (Boring)	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L	Cartridge, CoroTurn 107 Screw Clamp, SSSCR/L	CoroBore 825	Boring Bar For Fine Boring Head, R429.90/R249U	Kyocera, Inner Diameter Boring Holder, A-DCLN Type	BSB CoroBore Boring Head	SW Boring Head (Rough Highly Rigid Type)	End Face Grooving Blade SGFFH-R/L	Holder for Inner Diameter Machining (with Hole for Cutting Oil) TGIR/L-C (Top Grip)	EZB-ST (Internal Diameter Processing)	S-SDZC-A Type Steel Bar (Draw Machining)	CoroCut MB Solid-Carbide Boring Tool Bit MB-E	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR/L	CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR/L-X	CoroTurn SL Coromant Capto Dampened Boring Tool Bit, C-570-3C	Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR/L	DuoBore Cartridge Twin-Edge Boring Tool 391.68A	DuoBore Twin-Edge Boring Tool 391.68A	Boring Tool Bit, CoroTurn 107, Screw Clamp, A-SVUBR/L	High Speed Fine Boring Head
From	₹ 50,246.82	₹ 3,570.00	₹ 6,877.49	₹ 55,245.00	₹ 31,062.24	₹ 22,407.76	₹ 21,307.44	₹ 72,883.93	₹ 9,832.45	₹ 1,898.80	₹ 1,934.05	₹ 13,426.96	₹ 16,429.36	₹ 20,621.65	₹ 76,739.58	₹ 97,769.42	₹ 145,677.19	₹ 84,925.96	₹ 17,036.55	₹ 30,055.45	₹ 63,090.35	₹ 26,841.80	₹ 17,443.82	₹ 12,101.47	₹ 17,625.13	₹ 16,113.25	₹ 20,621.65	₹ 95,121.44	₹ 18,824.20	₹ 25,522.47	₹ 17,036.55	₹ 23,097.31	₹ 19,160.38	₹ 23,751.82	₹ 1,151.85	₹ 12,388.11	₹ 29,282.18	₹ 16,113.25	₹ 31,062.24	₹ 131,790.02	₹ 40,790.25	₹ 27,686.96	₹ 29,894.29	₹ 16,113.25	₹ 218,485.31
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	Quote	9 Day(s) or more	8 Day(s) or more	7 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	9 Day(s) or more
Applicable Tip Shape	T (Triangle)	-	T (Triangle)	-	D (55° Diamond-Shape)	-	C (80° Diamond-Shape)	W (Hexagonal Type)	-	-	-	T (Triangle)	T (Triangle)	T (Triangle)	-	T (Triangle)	T (Triangle)	-	-	-	-	Other	-	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	-	T (Triangle)	-	-	-	Other	Other	-	D (55° Diamond-Shape)	-	D (55° Diamond-Shape)	D (55° Diamond-Shape)	-	D (55° Diamond-Shape)	T (Triangle)	C (80° Diamond-Shape) / T (Triangle)	V (35° Diamond-Shaped)	-
Minimum Processing Diameter φA	20 ～ 100	0.3 ～ 7.2	-	-	20 ～ 50	-	25 ～ 50	15 ～ 18	-	1 ～ 4	2 ～ 7	12 ～ 22	20 mm ～ 32 mm	20 ～ 55	-	19 ～ 136	3	-	50 ～ 130	-	1	20 ～ 65	-	6 ～ 8	23 ～ 32	16 ～ 32	40 ～ 50	-	3 ～ 26	-	50 ～ 130	20 ～ 148	35 ～ 150	20.5 ～ 57	2.5 ～ 7.5	14 ～ 27	-	20 ～ 32	22 ～ 50	20 ～ 50	32 ～ 63	148	25 ～ 123	22 ～ 27	-
Application	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	-	Internal Diameter	Internal Diameter	-	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	-	Internal Diameter	-	Internal Diameter	Internal Diameter	-	Internal Diameter	Pull	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	-	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Inner diameter profiling	Internal Diameter	-	Pull	Internal Diameter	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	-
Selfishly	-	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	-	-	Right-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	-	-	-	-	-	-	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand	-	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	-	-	Right-hand / Left-hand	-
Clamp Shape	-	-	-	-	Screw-on	-	-	-	-	-	-	Screw-on	Clamp-on	Screw-on	-	Screw-on	-	-	-	-	-	Cable clamp	-	Screw-on	Screw-on	Screw-on	-	-	Pin Lock	Cable clamp	-	-	Clamp-on	Cable clamp	-	Screw-on	-	Screw-on	Screw-on	-	Screw-on	-	-	Screw-on	-
Overall Length L1	-	27.25 ～ 72.25	-	24.1 ～ 62.7	-	70	32 ～ 55	144 ～ 204	80 ～ 135	26.5 ～ 39.8	26.5 ～ 49.8	140 ～ 200	200 mm ～ 300 mm	25 ～ 63	-	-	-	-	-	-	-	160 ～ 300	100	100	180 ～ 250	150 ～ 300	50.1 ～ 55.3	-	-	-	-	-	-	150 ～ 300	32 ～ 74.2	140 ～ 200	87.9 ～ 124.7	155.1 ～ 300	-	-	-	-	-	200 ～ 250	-
Clearance angle	-	-	-	-	-	-	-	-	-	-	-	-	11°	-	-	-	-	-	-	-	-	-	-	7°	7°	7°	-	-	-	-	-	-	7°	-	-	7°	-	7°	-	-	-	-	-	5°	-
Shank Diameter φD	-	4 ～ 7	-	16 ～ 32	16 ～ 40	-	-	14 ～ 16	-	-	-	10 ～ 20	16 mm ～ 25 mm	-	-	-	12 ～ 20	-	16 ～ 42	-	-	20 ～ 40	-	10	16 ～ 25	12 ～ 25	-	-	12 ～ 20	-	16 ～ 42	-	-	16 ～ 40	2 ～ 7	10 ～ 20	-	16 ～ 25	16 ～ 40	-	-	-	-	16 ～ 20	-
Protrusion length (L/D)	-	-	-	-	-	-	-	100 ～ 160	-	-	-	～5.5	32.5 – 64 mm ～ 49 – 100 mm	-	-	-	-	-	-	-	-	4.5 ～ 20	-	～5.5	～5.5	18 ~ 48 ～ 100	-	-	-	-	-	-	20 ～ 35	5.5 ～ 17.5	-	Up to 4	-	18 ~ 48 ～ 100	-	-	-	-	-	64 ～ 80	-
Lubrication Hole Y/N	Available	NA	-	NA	Available	-	NA	Available	-	-	-	Available	NA	NA	Available	Available	Available / NA	-	-	-	Available	NA	-	NA	Available	Available	NA	Available	Available	-	-	Available	NA	Available	-	NA	-	Available	Available	Available	Available	Available	Available	Available	-

Loading...