(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Holding Tools for O.D. Tuning
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
231 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand Outer Diameter / Profiling Back Surface Clamp - - From: ₹ 7,472.02 Days to Ship: 7 Day(s) or more 
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder
KYOCERA
[Features]
·This is SDJC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and profilingApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Left-hand Outer Diameter / Profiling Screw-on - - From: ₹ 5,894.22 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PDJN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter / Profiling Lever lock 20 ～ 32 20 ～ 32 From: ₹ 6,792.11 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/L
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) - Right-hand Outer Diameter / Profiling Clamp-on 12 12 From: ₹ 13,236.24 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOCERA
[Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Left-hand End Face Clamp-on - - From: ₹ 7,830.98 Days to Ship: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SDJC Type (External Diameter, Profiling) Holder
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Right-hand Outer Diameter / Profiling Screw-on - - From: ₹ 5,994.67 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SVPB Type (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Left-hand Outer Diameter / End Face / Profiling Screw-on 20 ～ 25 20 ～ 25 From: ₹ 7,796.65 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SVLP Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand Outer Diameter / Profiling Screw-on - - From: ₹ 10,199.04 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, CTGPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) - Right-hand Outer Diameter Clamp-on 32 25 From: ₹ 19,341.20 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite CoroTurn HP Cutting Head C-PDJNR/L-15HP
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter / Profiling / Chamfer Pin Lock - - From: ₹ 43,874.87 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DDNNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative No-hand Outer Diameter / Chamfer / Post-Grinding Cable clamp - - From: ₹ 29,282.18 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CCLN Type (Outer Diameter Machining / End Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand Outer Diameter / End Face Clamp-on - - From: ₹ 7,185.40 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SCLC-FF Type (without Offset) (External Diameter / End Face Machining)
KYOCERA
[Features]
·This is SCLC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and flangeApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter / End Face Screw-on 8 ～ 10 8 ～ 10 From: ₹ 6,075.55 Days to Ship: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
COROMANT CAPTO, Cutting Head for CORO-TURN RC Negative Tip
SANDVIK
Unique shape exhibits high performance
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand / Left-hand End Face Cable clamp - - From: ₹ 24,927.82 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DVPNR/L
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative Right-hand / Left-hand Outer Diameter / Profiling / Chamfer Cable clamp 32 ～ 40 25 ～ 40 From: ₹ 16,113.25 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) - Right-hand / Left-hand Outer Diameter / Profiling Clamp-on 8 ～ 16 10 ～ 16 From: ₹ 13,236.24 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DCLN Type (Outer Diameter Machining / End Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter / End Face Cable clamp 20 ～ 25 20 ～ 25 From: ₹ 7,151.07 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DDJN Type (Outer Diameter Machining / Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative Right-hand Outer Diameter / End Face Cable clamp - - From: ₹ 6,969.75 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DVPN Type (External Diameter, Profiling/Undercutting)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative Left-hand Outer Diameter / End Face / Profiling Cable clamp - - From: ₹ 8,405.58 Days to Ship: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SABS-40F Type (Cutting Edge Width 2.8 mm, Depth 4 mm Max.)
KYOCERA
Back surface clamping type / screw clamping type back turning (outer diameter) holder.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) Other - Right-hand Post-Grinding Other - - From: ₹ 10,576.89 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SCLC Type (External Diameter/End-Face Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter / End Face Screw-on 12 ～ 20 12 ～ 20 From: ₹ 6,391.64 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PCLN Type (External Diameter/End-Face Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter / End Face Lever lock 25 ～ 32 25 ～ 32 From: ₹ 7,366.71 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DTGN Type (Outer Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Left-hand Outer Diameter Cable clamp - - From: ₹ 7,251.53 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WTJN-N Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Right-hand Outer Diameter / Profiling Wedge Lock - - From: ₹ 8,074.75 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S...SDUC Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv Left-hand Outer Diameter / Profiling Screw-on 18 ～ 23 18 ～ 23 From: ₹ 19,202.95 Days to Ship: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP
SANDVIK
Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) - Right-hand / Left-hand Outer Diameter / End Face / Chamfer Lever lock - - From: ₹ 43,874.87 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Pozidriv Right-hand / Left-hand Outer Diameter / End Face / Chamfer Clamp-on 8 8 From: ₹ 11,270.02 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Pozidriv No-hand Outer Diameter / Profiling / Post-Grinding Clamp-on - - From: ₹ 11,270.02 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) S (Rectangular) - Right-hand / Left-hand Outer Diameter Clamp-on - 25 From: ₹ 18,410.33 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) D (55° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter / Profiling Cable clamp - - From: ₹ 27,618.65 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Negative Right-hand / Left-hand Outer Diameter / Profiling / Chamfer Cable clamp - - From: ₹ 29,282.18 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) C (80° Diamond-Shape) Negative Right-hand / Left-hand Outer Diameter / End Face / Chamfer Pin Lock - - From: ₹ 25,341.69 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) R (Circular) Negative No-hand Outer Diameter / Profiling Pin Lock - - From: ₹ 32,377.53 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning, Shank Tool Bit For Negative Inserts, T-Max P Lever Clamp, PDJNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) - - - - - - - From: ₹ 12,790.22 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) S (Rectangular) Negative Right-hand / Left-hand Outer Diameter Cable clamp 20 ～ 50 20 ～ 50 From: ₹ 11,063.75 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Negative Left-hand Outer Diameter Cable clamp 20 ～ 25 20 ～ 25 From: ₹ 12,790.22 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, SVVBN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv No-hand Outer Diameter / Chamfer / Post-Grinding Clamp-on - - From: ₹ 30,515.76 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) S (Rectangular) - Right-hand / Left-hand End Face Clamp-on - - From: ₹ 34,965.24 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Pozidriv Right-hand / Left-hand Outer Diameter Clamp-on 12 ～ 16 12 ～ 16 From: ₹ 11,270.02 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityApplicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand / Left-hand Outer Diameter / End Face / Profiling Clamp-on - - From: ₹ 13,236.24 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Achieving high productivity and low production costs, with excellent machined surface quality and dimensional tolerances
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) - - Right-hand / Left-hand - - 50 47 From: ₹ 45,415.18 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) T (Triangle) Pozidriv Left-hand Outer Diameter Screw-on 16 16 From: ₹ 6,929.04 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SEC-Mini Tool Bit, Zero Offset Holder, SVJC-X Type
SUMITOMO ELECTRIC HARDMETAL
Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit offset 0 holder SVJC-X type.
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) V (35° Diamond-Shaped) Pozidriv Right-hand Outer Diameter / Profiling Screw-on 10 10 From: ₹ 6,133.44 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PSBN Type (Outer Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) S (Rectangular) Negative Right-hand / Left-hand Outer Diameter Lever lock - - From: ₹ 6,612.13 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
PSSN Type (External Diameter, End Face, Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard
Applicable Tip Shape Applicable Chip Clearance Angle Selfishly Application Clamp Shape Shank height(mm) Shank width(mm) S (Rectangular) Negative Right-hand Outer Diameter / End Face / Chamfer Lever lock 16 16 From: ₹ 6,434.49 Days to Ship: 8 Day(s) or more
8 Day(s) or more
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | KYOCERA | KYOCERA | KYOCERA | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | KYOCERA |
| Product Series | AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling) | SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder | SVPB Type (outer diameter, end surface, profile, relief machining) | SCLC-FF Type (without Offset) (External Diameter / End Face Machining) | Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS | CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4 | Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A | Outer-Diameter Turning, Shank Tool Bit For Negative Inserts, T-Max P Lever Clamp, PDJNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L | Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11 | |||||||||||||||||||||||||||||
| From | ₹ 7,472.02 | ₹ 5,894.22 | ₹ 6,792.11 | ₹ 13,236.24 | ₹ 7,830.98 | ₹ 5,994.67 | ₹ 7,796.65 | ₹ 10,199.04 | ₹ 19,341.20 | ₹ 43,874.87 | ₹ 29,282.18 | ₹ 7,185.40 | ₹ 6,075.55 | ₹ 24,927.82 | ₹ 16,113.25 | ₹ 13,236.24 | ₹ 7,151.07 | ₹ 6,969.75 | ₹ 8,405.58 | ₹ 10,576.89 | ₹ 6,391.64 | ₹ 7,366.71 | ₹ 7,251.53 | ₹ 8,074.75 | ₹ 19,202.95 | ₹ 43,874.87 | ₹ 11,270.02 | ₹ 11,270.02 | ₹ 18,410.33 | ₹ 27,618.65 | ₹ 29,282.18 | ₹ 25,341.69 | ₹ 32,377.53 | ₹ 12,790.22 | ₹ 11,063.75 | ₹ 12,790.22 | ₹ 30,515.76 | ₹ 34,965.24 | ₹ 11,270.02 | ₹ 13,236.24 | ₹ 45,415.18 | ₹ 6,929.04 | ₹ 6,133.44 | ₹ 6,612.13 | ₹ 6,434.49 |
| Days to Ship | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more |
| Applicable Tip Shape | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | Other | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | R (Circular) | - | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | - | T (Triangle) | V (35° Diamond-Shaped) | S (Rectangular) | S (Rectangular) |
| Applicable Chip Clearance Angle | Pozidriv | Pozidriv | Negative | - | Negative | Pozidriv | Pozidriv | Pozidriv | - | Negative | Negative | Negative | Pozidriv | Negative | Negative | - | Negative | Negative | Negative | - | Pozidriv | Negative | Negative | Negative | Pozidriv | - | Pozidriv | Pozidriv | - | Negative | Negative | Negative | Negative | - | Negative | Negative | Pozidriv | - | Pozidriv | Pozidriv | - | Pozidriv | Pozidriv | Negative | Negative |
| Selfishly | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand | Left-hand | Right-hand | Right-hand | Right-hand / Left-hand | No-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | - | Right-hand / Left-hand | Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand |
| Application | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | End Face | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / End Face | Outer Diameter / End Face | End Face | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter / End Face / Profiling | Post-Grinding | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Post-Grinding | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling | - | Outer Diameter | Outer Diameter | Outer Diameter / Chamfer / Post-Grinding | End Face | Outer Diameter | Outer Diameter / End Face / Profiling | - | Outer Diameter | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / End Face / Chamfer |
| Clamp Shape | Back Surface Clamp | Screw-on | Lever lock | Clamp-on | Clamp-on | Screw-on | Screw-on | Screw-on | Clamp-on | Pin Lock | Cable clamp | Clamp-on | Screw-on | Cable clamp | Cable clamp | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Other | Screw-on | Lever lock | Cable clamp | Wedge Lock | Screw-on | Lever lock | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Pin Lock | Pin Lock | - | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | - | Screw-on | Screw-on | Lever lock | Lever lock |
| Shank height(mm) | - | - | 20 ～ 32 | 12 | - | - | 20 ～ 25 | - | 32 | - | - | - | 8 ～ 10 | - | 32 ～ 40 | 8 ～ 16 | 20 ～ 25 | - | - | - | 12 ～ 20 | 25 ～ 32 | - | - | 18 ～ 23 | - | 8 | - | - | - | - | - | - | - | 20 ～ 50 | 20 ～ 25 | - | - | 12 ～ 16 | - | 50 | 16 | 10 | - | 16 |
| Shank width(mm) | - | - | 20 ～ 32 | 12 | - | - | 20 ～ 25 | - | 25 | - | - | - | 8 ～ 10 | - | 25 ～ 40 | 10 ～ 16 | 20 ～ 25 | - | - | - | 12 ～ 20 | 25 ～ 32 | - | - | 18 ～ 23 | - | 8 | - | 25 | - | - | - | - | - | 20 ～ 50 | 20 ～ 25 | - | - | 12 ～ 16 | - | 47 | 16 | 10 | - | 16 |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
-
Selfishly
-
Application
-
Clamp Shape
-
Shank height(mm)
-
Shank width(mm)
Related Categories to Holding Tools for O.D. Tuning
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy