Holding Tools for O.D. Tuning（Selfishly：Right-hand Page5）

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDJCR1012E

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	10	12

  From: ₹ 32,603.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: ₹ 13,236.24
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJCR/L-E11HP

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	10 ～ 16	10 ～ 16

  From: ₹ 34,027.65
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	8 ～ 16	10 ～ 16

  From: ₹ 13,236.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit For Profiling, T-Max Top Clamp, R/L170.5

  SANDVIK

  Excellent chip control and process stability for best part quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	Negative	Right-hand	Outer Diameter / Profiling / Chamfer	-	40	25

  From: ₹ 25,032.29
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	End Face	Clamp-on	-	-

  From: ₹ 34,965.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter	Clamp-on	-	-

  From: ₹ 34,965.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp, CRSNR/L5040T25

  SANDVIK

  Excellent chip control and process stability for best part quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter / End Face / Profiling	Clamp-on	50	40

  From: ₹ 45,104.44
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: ₹ 27,618.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTFNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	End Face	Cable clamp	-	-

  From: ₹ 29,282.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Cable clamp	-	-

  From: ₹ 25,341.69
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Cable clamp	-	-

  From: ₹ 29,282.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face / Profiling	Clamp-on	-	-

  From: ₹ 29,282.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: ₹ 30,515.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STFCR/L-11

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	End Face	Clamp-on	-	-

  From: ₹ 11,270.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11

  SANDVIK

  [Features]
  An outer-diameter turning tool featuring stable insert clamping and excellent repeatability.
  Produces an unimpeded flow of cutting chips.
  Requires little space for operation.
  Features a small number of component parts.
  For outer-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	Outer Diameter	Clamp-on	12	12

  From: ₹ 11,270.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	Outer Diameter	Clamp-on	16	16

  From: ₹ 12,435.29
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: ₹ 13,236.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy Cutting - Railway Wheel Correction Turning, Holder For Cutting Head, For Single Blade, L175.32-M

  SANDVIK

  Achieving high productivity and low production costs, with excellent machined surface quality and dimensional tolerances

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	Right-hand	-	-	50	47

  From: ₹ 45,415.18
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy Turning, Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSKNR/L

  SANDVIK

  T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter / End Face / Chamfer	Cable clamp	40 ～ 50	40 ～ 50

  From: ₹ 24,180.44
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto T-Max P- Lever Clamp, PRSCR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter	Lever lock	-	-

  From: ₹ 32,377.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto, DSSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Clamp-on	-	-

  From: ₹ 35,068.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Back-Turning, TB-N

  NGK SPARK PLUG

  This is a post-grinding holder made by NGK SPARK PLUG.
  Triangular shape, TB42 / TB43 inserts are compatible.
  The clamping method is clamp-on.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Post-Grinding	Clamp-on	-	-

  From: ₹ 14,668.11
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C17

  NGK SPARK PLUG

  [Applications]
  Can be used for external machining.
  [Features]
  Clamp-on method.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter	Clamp-on	-	-

  From: ₹ 13,564.44
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C15

  NGK SPARK PLUG

  [Features]· For SN (square) inserts· For end surface machining· Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter	Clamp-on	-	-

  From: ₹ 13,564.44
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C11

  NGK SPARK PLUG

  [Features]
  · For SN (square) inserts
  · Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter	Clamp-on	-	-

  From: ₹ 13,564.44
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, TTGN/WTGN

  NGK SPARK PLUG

  [Features]
  · For TN (equilateral triangle) inserts
  · Multi clamp

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on / Cable clamp	-	-

  From: ₹ 15,702.11
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C31/CCLN

  NGK SPARK PLUG

  [Features]
  · For CN (diamond 80°) inserts
  · For outer diameter and end surface machining
  · Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: ₹ 14,392.18
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Back-Turning, TBP-OH

  NGK SPARK PLUG

  This is a double-sided clamping holder for post-grinding processing made by NGK SPARK PLUG.
  TBP type inserts are compatible.
  The processing application is post-grinding.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	-	-	-

  From: ₹ 33,636.60
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SDJC-N/SDJC

  NGK SPARK PLUG

  [Features]
  ·By adopting a unique center height adjustment mechanism, you can easily adjust the height of the cutting edge with a single wrench! Reduces the time spent for accuracy!

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	-	-	-	-

  From: ₹ 11,425.44
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SDJC-N-F

  NGK SPARK PLUG

  [Features]
  ·By adopting a unique center height adjustment mechanism, you can easily adjust the cutting edge height with a single wrench!
  ·Reduce time spent on accuracy!
  ·Shaft Supports

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	-	-	-	-

  From: ₹ 14,322.55
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SCLC-N-F

  NGK SPARK PLUG

  This is a pre-grinding holder made by NGK SPARK PLUG.
  80° two-bolt shape, CC□□09T3 inserts are compatible.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	-	-	-	-

  From: ₹ 14,322.55
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SVAC-N

  NGK SPARK PLUG

  [Features]
  ·By adopting a unique center height adjustment mechanism, you can easily adjust the height of the cutting edge with a single wrench! Reduces the time spent for accuracy!

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	-	-	-	-

  From: ₹ 15,012.33
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, PCLN

  NGK SPARK PLUG

  [Features]
  · Lever-lock method
  · Front/back common tightening

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	-	-	-	-

  From: ₹ 13,461.31
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Back-Turning, TBVC-F10

  NGK SPARK PLUG

  [Applications]
  Can be used for post-grinding.
  [Features]
  Right-handed holder for steel materials such as stainless steel and steel.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	Right-hand	Post-Grinding	-	-	-

  From: ₹ 17,909.44
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

Brand
Product Series
From
Days to Ship
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG
Product Series	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDJCR1012E	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJCR/L-E11HP	Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS	Outer Diameter Turning, Shank Tool Bit For Profiling, T-Max Top Clamp, R/L170.5	Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4	Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4	Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp, CRSNR/L5040T25	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTFNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTJNR/L	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR/L	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STFCR/L-11	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S	Heavy Cutting - Railway Wheel Correction Turning, Holder For Cutting Head, For Single Blade, L175.32-M	Heavy Turning, Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSKNR/L	Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto T-Max P- Lever Clamp, PRSCR/L	Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto, DSSNR/L	Holder For Back-Turning, TB-N	Holder For Outer Diameter Machining, C17	Holder For Outer Diameter Machining, C15	Holder For Outer Diameter Machining, C11	Holder For Outer Diameter Machining, TTGN/WTGN	Holder For Outer Diameter Machining, C31/CCLN	Holder For Back-Turning, TBP-OH	Holder For Front-Turning, SDJC-N/SDJC	Holder For Front-Turning, SDJC-N-F	Holder For Front-Turning, SCLC-N-F	Holder For Front-Turning, SVAC-N	Holder For Front-Turning, PCLN	Holder For Back-Turning, TBVC-F10
From	₹ 32,603.87	₹ 13,236.24	₹ 34,027.65	₹ 13,236.24	₹ 25,032.29	₹ 34,965.24	₹ 34,965.24	₹ 45,104.44	₹ 27,618.65	₹ 29,282.18	₹ 25,341.69	₹ 29,282.18	₹ 29,282.18	₹ 30,515.76	₹ 11,270.02	₹ 11,270.02	₹ 12,435.29	₹ 13,236.24	₹ 45,415.18	₹ 24,180.44	₹ 32,377.53	₹ 35,068.36	₹ 14,668.11	₹ 13,564.44	₹ 13,564.44	₹ 13,564.44	₹ 15,702.11	₹ 14,392.18	₹ 33,636.60	₹ 11,425.44	₹ 14,322.55	₹ 14,322.55	₹ 15,012.33	₹ 13,461.31	₹ 17,909.44
Days to Ship	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	6 Day(s) or more	14 Day(s) or more	14 Day(s) or more	6 Day(s) or more	14 Day(s) or more	14 Day(s) or more
Applicable Tip Shape	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	-	S (Rectangular)	S (Rectangular)	R (Circular)	C (80° Diamond-Shape)	T (Triangle)	T (Triangle)	T (Triangle)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	T (Triangle)	T (Triangle)	V (35° Diamond-Shaped)	-	S (Rectangular)	R (Circular)	S (Rectangular)	T (Triangle)	S (Rectangular)	S (Rectangular)	S (Rectangular)	T (Triangle)	C (80° Diamond-Shape)	Other	D (55° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	-
Applicable Chip Clearance Angle	-	-	-	-	Negative	-	-	-	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Selfishly	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling / Chamfer	End Face	Outer Diameter	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Chamfer	End Face	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	End Face	Outer Diameter	Outer Diameter	Outer Diameter / Profiling	-	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Post-Grinding	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter / End Face	Post-Grinding	-	-	-	-	-	Post-Grinding
Clamp Shape	Clamp-on	Clamp-on	Clamp-on	Clamp-on	-	Clamp-on	Clamp-on	Clamp-on	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	-	Cable clamp	Lever lock	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on / Cable clamp	Clamp-on	-	-	-	-	-	-	-
Shank height(mm)	10	-	10 ～ 16	8 ～ 16	40	-	-	50	-	-	-	-	-	-	-	12	16	-	50	40 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank width(mm)	12	-	10 ～ 16	10 ～ 16	25	-	-	40	-	-	-	-	-	-	-	12	16	-	47	40 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...