Cutters / Indexable End Mills（Machining Application：Plane）

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Cutter, Milling Cutter, Front Face Milling Cutter

  SANDVIK

  A versatile high-feed milling
  [Features]It is a tool with a concept of highly productive roughing to be used when a high cutting chip discharge rate is a top priority
  The 10° entering angle achieves face milling at a very high feed rate

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	52mm	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing	-	3	Arbor	-	-	2	Carbide Coat

  From: ₹ 75,472.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEC Type End Mill

  KYOCERA

  Shoulder grinding, groove cutting, and plane surface grinding are all possible.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	10 ～ 32	-	-	80 ～ 210	1 ～ 2	-	10 ～ 32	-	-	-

  From: ₹ 14,565.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting

  SANDVIK

  Suitable not only for general milling but also for mold making, first recommendation for roughing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 mm ～ 160 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing / Finishing	50 ～ 63	3 ～ 8	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: ₹ 56,565.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type

  OSG

  An octagonal and bore-type face mill. Economical through the use of double sides of octagonal inserts, totaling 16 corners.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 125	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	40 ～ 63	5 ～ 12	Arbor	-	-	-	Carbide Coat

  From: ₹ 53,857.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type Face Mill Holder

  KYOCERA

  MFWN90 type face mill
  [Features]
  ·Good sharpness with low resistance
  ·Resistant to chatter
  ·Thick wall design with excellent chipping resistance, neutral insert
  ·Long life with new technology MEGACOAT NANO
  ·A lineup of 5 chipbreakers for different machining applications

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	7 ～ 10	-	-	-	-	-

  From: ₹ 53,664.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 490 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	40mm ～ 250mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	4 ～ 16	Arbor	16 ～ 60	-	5.5 ～ 10	Carbide Coat

  From: ₹ 55,123.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type

  OSG

  [Features]
  · OSG Phoenix Series
  · A straight shank type.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 80	-	-	40 ～ 50	3 ～ 9	Arbor	-	-	-	-

  From: ₹ 46,269.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18

  SANDVIK

  ● When in doubt, use this tool. Wide range of compatible applications and high performance
  Tool diameter: ø9.7 to 200 mm, Maximum cutting depth: Up to 71 mm
  Cylindrical shank, arbor mounting, anti-vibration type, lightweight type with additive manufacturing
  Supports all types of machining processes and work materials with 17 long edge grades and 24 breakers
  ● 20% lower power than conventional products
  The energy saving cutter contributes to power saving
  Easy to use even on compact machines
  ● Supports face milling machine, shoulder milling, helical machining, and plunge machining
  A versatile cutter that can do everything with just one unit, for which tailor-made (semi-standard product) is also available with short delivery times
  ●GC4330, GC4340
  The steel-machining CVD grade is ideal for the versatile CoroMill 390
  The Inveio coating provides excellent abrasion resistance and long tool lifespan
  

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	40 ～ 84	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing	-	3 ～ 6	Centering Plug	-	38 ～ 100	15.4	Carbide Coat

  From: ₹ 49,657.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Surface Processing Cutter DoPent TEN09

  TUNGALOY

  Screw clamp surface processing cutter
  [Features]
  · Cutting edge angle: 70°
  · Uses pentagonal double-sided inserts

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 160	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper	-	40 ～ 63	3 ～ 20	Arbor	-	40 ～ 63	6.4	Carbide Coat

  From: ₹ 31,411.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	16 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	90 ～ 190	2 ～ 6	With handle	16 ～ 32	25 ～ 90	-	Carbide Coat / No Carbide Coat

  From: ₹ 24,334.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFPN45 Type Face Mill

  KYOCERA

  [Features]
  ·The pentagon (10 corners) insert reduces the cost per corner.
  ·The helical cutting-edge design and double-edge position improve low cutting edge and wear resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	5 ～ 10	-	-	-	-	-

  From: ₹ 54,271.78
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECH Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  [Applications]Can be used for shoulder milling and face milling. [Features]This product has a coolant hole to the tip blade.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	40	-	-	150 ～ 170	8 ～ 24	-	32 ～ 42	-	-	-

  From: ₹ 79,666.69
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 590 Cutter

  SANDVIK

  A light-cutting face milling cuter suitable for high-speed finishing
  [Features]
  The tool is designed with a serrated-tip interface for increased stability and reduced run-out

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	63mm ～ 160mm	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	Finishing	40 ～ 63	5 ～ 10	Arbor	22 ～ 40	-	-	Carbide Coat

  From: ₹ 106,021.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q

  SANDVIK

  [Features]
  Round-insert cutter
  For everything from roughing through to medium cutting and high-feed machining
  For profiling
  Extra-close pitch
  Arbor mounting (millimeters)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	40 ～ 200	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	4 ～ 12	Arbor	16 ～ 60	-	4 ～ 10	-

  From: ₹ 59,417.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type

  OSG

  The wide insert pocket improves chip removal capability, and the employment of a body relief shape that supports 3D machining enables highly efficient shape machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	34 ～ 88	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	40 ～ 50	3 ～ 10	Arbor	-	-	-	Carbide Coat / No Carbide Coat

  From: ₹ 36,406.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCM type Standard)

  BIG DAISHOWA SEIKI

  [Features]
  · It is comparable to a sharp and tough solid end mill. Throw-away end mill cutter. Low resistance and high efficiency cutter dedicated for lateral feed processing.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	16 ～ 50	-	-	-	2 ～ 5	With handle	-	23 ～ 65	-	-

  From: ₹ 22,954.00
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hepta Mill HEP type Bore type milling cutter

  DIJET

  [Features]
  · It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	63 ～ 200	-	-	-	4 ～ 9	Arbor	-	-	-	-

  From: ₹ 56,809.40
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CERATIZIT MaxiMill 274 Milling Cutter

  OSG

  [Specifications]
  · Shape: Cutter
  · Blade Tip Replacement Type End Mill
  [Applications] Flat surfaces, grooves, chamfering

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	18.9 ～ 123.7	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough to Finish Processing	40$40.7 ～ 98.7	3 ～ 12	With handle / Arbor	20 ～ 25	25.7 ～ 40.7	-	Carbide Coat

  From: ₹ 31,577.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  U-Max Drill End Mill Diameter 12 To 40 mm Coarse Pitch (Few Blades) R216.2

  SANDVIK

  Shoulder milling cutter for a highly productive, efficient and reliable machining solution

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	20 ～ 32	general steel / Stainless Steel	Finishing	115 ～ 130	1 ～ 2	With handle	20 ～ 32	39.7 ～ 39.9	15	-

  From: ₹ 35,214.36
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Milling Holder

  KYOCERA

  [Features]
  · MRX type: Radius cutter with a low-resistance design which achieves good cutting properties and high efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	-	-	-	-	-	-

  From: ₹ 17,827.68
  Days to Ship: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill FCM Type Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]
  · A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	40 ～ 50	-	-	130	4 ～ 5	With handle	32	40	-	-

  From: ₹ 23,107.35
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Type Cutter DOREC TPQ

  TUNGALOY

  Economical double-sided 4-cornered specification with sharpness equivalent to the positive type. Tough cutting blade for high-efficiency machining. Unique blade type that reduces cutting resistance

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	40 ～ 160	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	40 ～ 63	3 ～ 12	Arbor	35 ～ 100	-	9 ～ 16	Carbide Coat

  From: ₹ 35,892.28
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEF Type Counterbore End Mill

  KYOCERA

  [Features]
  ·This product allows the machining diameter to be set arbitrarily in 0.1 mm increments.
  ·It can also handle narrow machining diameters that are not in the standard repertoire.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	103 ～ 126	1 ～ 3	-	10 ～ 20	23 ～ 46	-	-

  From: ₹ 13,309.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PDR Phoenix Series High Efficiency Radius Cutter With Handle Type

  OSG

  A high-feed radius cutter series that uses a variable negative-chamfered insert that prevents chipping and reduces cutting force.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	20 ～ 105	general steel / high hardness steel / Cast Iron	-	63 ～ 306	2 ～ 6	With handle / Centering Plug	MT5-M16 ～ CN50.8	50 ～ 170	-	Carbide Coat

  From: ₹ 32,681.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 End Mill

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	12mm ～ 42mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	2 ～ 6	Centering Plug	-	-	0.7 ～ 5	-

  From: ₹ 27,307.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 345 Cutter

  SANDVIK

  First-choice cutter when high productivity is top priority
  [Features]
  Exhibits high stiffness and toughness
  Excellent performance even for a combination of large depth of cut and high feed per tooth

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	54.08mm ～ 174.08mm	general steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	45 ～ 63	4 ～ 12	Arbor / Centering Plug	22 ～ 55	-	6	-

  From: ₹ 60,581.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 Long Edge Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	12 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing / Finishing	68 ～ 110	1 ～ 6	With handle	16 ～ 32	-	10 ～ 15.7	Carbide Coat

  From: ₹ 29,480.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSEL SS Phoenix Series Roughing End Mill Straight Shank Type

  OSG

  [Specifications]
  · Shape: Cutter
  · Blade Tip Replacement Type End Mill
  [Applications] Flat surfaces, side surfaces, grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	25 ～ 50	-	-	125 ～ 144	2 ～ 4	With handle	25 ～ 42	50 ～ 64	-	-

  From: ₹ 75,378.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSF SS Phoenix Series 4 Corner Shoulder Milling Cutter Straight Shank Type

  OSG

  [Specifications]
  · Shape: Cutter
  · Blade Tip Replacement Type End Mill
  [Applications] Flat surfaces, side surfaces, grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	25 ～ 40	-	-	120 ～ 140	3 ～ 5	With handle	25 ～ 32	35 ～ 50	-	-

  From: ₹ 27,507.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

  SANDVIK

  Shoulder face milling cutter with amazing performance
  ● Wide range of applications
  Capable of face milling, shoulder milling, grooving and contouring
  Improved proximity with the introduction of an oversized cutter
  ● Amazing productivity
  Achieves high cutting conditions with a highly rigid body
  High insert mounting rigidity due to flat insert seat
  ● Outstanding machining accuracy
  Low resistance and high accuracy due to sharp tip
  Both the bottom and sides are processed with high precision
  ●GC4330, GC4340
  CVD grade for steel milling, ideal for versatile CoroMill® 490
  The Inveio coating provides excellent abrasion resistance and long tool lifespan
  

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	20 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	2 ～ 10	Centering Plug	-	23 ～ 70	5.5 ～ 10	-

  From: ₹ 43,242.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B

  SANDVIK

  Round tip cutter with light cutting action for roughing to semi-finishing
  [Features]
  Light cutting action allows smooth entry and exit for long tool setups

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	12 mm ～ 25 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Finishing	109 ～ 141	2	With handle	16 ～ 32	-	1 ～ 5	-

  From: ₹ 27,307.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A

  SANDVIK

  [Features]
  Round-insert end mill
  For everything from roughing through to medium cutting and high-feed machining
  For profiling
  Coarse pitch
  Cylindrical shank

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	10 mm ～ 32 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Finishing	160 ～ 250	2	With handle	16 ～ 32	-	0.7 ～ 7	-

  From: ₹ 28,925.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A

  SANDVIK

  High-productivity, high-precision finishing ball end mill that achieves excellent machined surface roughness

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	8 ～ 30/32	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing	83 ～ 240	-	With handle	12 ～ 32	19 ～ 54	1.2 ～ 4.8	Carbide Coat

  From: ₹ 32,895.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type

  OSG

  OSG PHOENIX series, wedge type
  [Work Material]General steel / heat-treated steel / stainless steel / cast iron

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	100 ～ 200	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	50 ～ 63	14 ～ 25	Arbor	-	-	-	Carbide Coat

  From: ₹ 144,357.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Square, Bore Type

  OSG

  [Features]
  · OSG Phoenix Series
  · Suitable for milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 125	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	45 ～ 63	4 ～ 8	Arbor	-	-	-	Carbide Coat

  From: ₹ 51,857.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Die Mate HDM Type Bore Type Mill / Regular Type

  DIJET

  [Features]
  · Supports materials from cast iron and general steel to stainless steel, titanium, and inconel

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 80	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	3 ～ 4	Arbor	-	-	-	-

  From: ₹ 44,805.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSRS15 Type Holder (Inch Specification)

  KYOCERA

  [Features]
  ·A square insert with 4 corners.
  ·The notched insert reduces cutting force during compression, and suppresses dispersion and chattering, enabling high feed.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	4	-	-	-	-	-

  From: ₹ 48,819.11
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEW Type Face Mill

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	4	-	-	-	-	-

  From: ₹ 44,410.25
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEC Type Face Mill

  KYOCERA

  Shoulder grinding, groove cutting, and plane surface grinding are all possible.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	7	-	-	-	-	-

  From: ₹ 60,297.73
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECX Type End Mill

  KYOCERA

  [Features]
  ·The low cutting force and high strength are suitable for compact machines.
  ·The general-purpose JT chip breaker and low-cutting force JS chip breaker cover a wide range of cutting areas.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	20 ～ 32	-	-	110 ～ 160	4 ～ 8	-	16 ～ 32	-	-	-

  From: ₹ 25,791.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECH Type Shell Mill (Without Coolant Holes)

  KYOCERA

  [Features]
  ·This product is capable of shoulder milling, grooving, and face milling.
  S (mm): 6
  Wrench: DTM-6

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	12 ～ 24	-	-	-	-	-

  From: ₹ 77,514.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  CoroMill 245 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	62.5mm ～ 268.8mm	general steel / Stainless Steel / Cast Iron	Finishing	-	4 ～ 16	Arbor	22 ～ 60	-	6 ～ 10	Carbide Coat

  From: ₹ 59,876.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 365 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	69.7mm ～ 166.7mm	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	Rough and medium rough processing	-	6 ～ 18	Arbor	22 ～ 50.8	-	6	Carbide Coat

  From: ₹ 66,498.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  CoroMill 390 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	80mm ～ 160mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Finishing	50 ～ 63	7 ～ 12	Arbor	25.4 ～ 50.8	-	15.4 ～ 15.7	Carbide Coat

  From: ₹ 90,122.82
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Profile Machining Milling Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	25mm ～ 40mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing	150 ～ 250	3 ～ 5	With handle	20 ～ 32	40	4 ～ 6	Carbide Coat

  From: ₹ 40,862.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	KYOCERA	SANDVIK	OSG	KYOCERA	SANDVIK	OSG	SANDVIK	TUNGALOY	OSG	KYOCERA	KYOCERA	SANDVIK	SANDVIK	OSG	BIG DAISHOWA SEIKI	DIJET	OSG	SANDVIK	KYOCERA	BIG DAISHOWA SEIKI	TUNGALOY	KYOCERA	OSG	SANDVIK	SANDVIK	SANDVIK	OSG	OSG	SANDVIK	SANDVIK	SANDVIK	SANDVIK	OSG	OSG	DIJET	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	Side Cutter, Milling Cutter, Front Face Milling Cutter	MEC Type End Mill	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type	MFWN90 Type Face Mill Holder	CoroMill 490 Cutter	Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type	End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18	Surface Processing Cutter DoPent TEN09	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	MFPN45 Type Face Mill	MECH Type End Mill (With Coolant Holes at Tip Blade)	CoroMill 590 Cutter	CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q	PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type	Full Cut Mill (FCM type Standard)	Hepta Mill HEP type Bore type milling cutter	CERATIZIT MaxiMill 274 Milling Cutter	U-Max Drill End Mill Diameter 12 To 40 mm Coarse Pitch (Few Blades) R216.2	Kyocera Milling Holder	Full Cut Mill FCM Type Straight Shank Type	Bore Type Cutter DOREC TPQ	MEF Type Counterbore End Mill	PDR Phoenix Series High Efficiency Radius Cutter With Handle Type	CoroMill 300 End Mill	CoroMill 345 Cutter	CoroMill 390 Long Edge Cutter	PSEL SS Phoenix Series Roughing End Mill Straight Shank Type	PSF SS Phoenix Series 4 Corner Shoulder Milling Cutter Straight Shank Type	End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C	CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B	CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A	CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A	Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type	Phoenix Series Face Milling Cutter, Square, Bore Type	Super Die Mate HDM Type Bore Type Mill / Regular Type	MSRS15 Type Holder (Inch Specification)	MEW Type Face Mill	MEC Type Face Mill	MECX Type End Mill	MECH Type Shell Mill (Without Coolant Holes)	CoroMill 245 Cutter	CoroMill 365 Cutter	CoroMill 390 Cutter	CoroMill 300 Profile Machining Milling Cutter
From	₹ 75,472.53	₹ 14,565.96	₹ 56,565.64	₹ 53,857.38	₹ 53,664.13	₹ 55,123.11	₹ 46,269.71	₹ 49,657.04	₹ 31,411.42	₹ 24,334.45	₹ 54,271.78	₹ 79,666.69	₹ 106,021.42	₹ 59,417.20	₹ 36,406.42	₹ 22,954.00	₹ 56,809.40	₹ 31,577.91	₹ 35,214.36	₹ 17,827.68	₹ 23,107.35	₹ 35,892.28	₹ 13,309.11	₹ 32,681.56	₹ 27,307.91	₹ 60,581.15	₹ 29,480.42	₹ 75,378.76	₹ 27,507.49	₹ 43,242.69	₹ 27,307.91	₹ 28,925.91	₹ 32,895.87	₹ 144,357.55	₹ 51,857.67	₹ 44,805.76	₹ 48,819.11	₹ 44,410.25	₹ 60,297.73	₹ 25,791.07	₹ 77,514.29	₹ 59,876.62	₹ 66,498.58	₹ 90,122.82	₹ 40,862.58
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s)	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Machining Application	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane
blade diameter D(φ)	52mm	10 ～ 32	50 mm ～ 160 mm	50 ～ 125	-	40mm ～ 250mm	50 ～ 80	40 ～ 84	50 ～ 160	16 ～ 63	-	40	63mm ～ 160mm	40 ～ 200	34 ～ 88	16 ～ 50	63 ～ 200	18.9 ～ 123.7	20 ～ 32	-	40 ～ 50	40 ～ 160	-	20 ～ 105	12mm ～ 42mm	54.08mm ～ 174.08mm	12 ～ 40	25 ～ 50	25 ～ 40	20 ～ 100	12 mm ～ 25 mm	10 mm ～ 32 mm	8 ～ 30/32	100 ～ 200	50 ～ 125	50 ～ 80	-	-	-	20 ～ 32	-	62.5mm ～ 268.8mm	69.7mm ～ 166.7mm	80mm ～ 160mm	25mm ～ 40mm
work material	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	-	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Stainless Steel	-	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	general steel / high hardness steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	-	-	-	general steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper
Finish category	Rough and medium rough processing	-	Rough and medium rough processing / Finishing	-	-	Rough and medium rough processing / Finishing	-	Rough and medium rough processing	-	-	-	-	Finishing	Rough and medium rough processing / Finishing	-	-	-	Rough to Finish Processing	Finishing	-	-	-	-	-	Rough and medium rough processing / Finishing	Finishing	Rough and medium rough processing / Finishing	-	-	Rough and medium rough processing / Finishing	Finishing	Finishing	Rough and medium rough processing	-	-	-	-	-	-	-	-	Finishing	Rough and medium rough processing	Finishing	Rough and medium rough processing
Overall length (L)(mm)	-	80 ～ 210	50 ～ 63	40 ～ 63	-	-	40 ～ 50	-	40 ～ 63	90 ～ 190	-	150 ～ 170	40 ～ 63	-	40 ～ 50	-	-	40$40.7 ～ 98.7	115 ～ 130	-	130	40 ～ 63	103 ～ 126	63 ～ 306	-	45 ～ 63	68 ～ 110	125 ～ 144	120 ～ 140	-	109 ～ 141	160 ～ 250	83 ～ 240	50 ～ 63	45 ～ 63	-	-	-	-	110 ～ 160	-	-	-	50 ～ 63	150 ～ 250
Number of flutes(sheet)	3	1 ～ 2	3 ～ 8	5 ～ 12	7 ～ 10	4 ～ 16	3 ～ 9	3 ～ 6	3 ～ 20	2 ～ 6	5 ～ 10	8 ～ 24	5 ～ 10	4 ～ 12	3 ～ 10	2 ～ 5	4 ～ 9	3 ～ 12	1 ～ 2	-	4 ～ 5	3 ～ 12	1 ～ 3	2 ～ 6	2 ～ 6	4 ～ 12	1 ～ 6	2 ～ 4	3 ～ 5	2 ～ 10	2	2	-	14 ～ 25	4 ～ 8	3 ～ 4	4	4	7	4 ～ 8	12 ～ 24	4 ～ 16	6 ～ 18	7 ～ 12	3 ～ 5
Mounting Method	Arbor	-	Arbor	Arbor	-	Arbor	Arbor	Centering Plug	Arbor	With handle	-	-	Arbor	Arbor	Arbor	With handle	Arbor	With handle / Arbor	With handle	-	With handle	Arbor	-	With handle / Centering Plug	Centering Plug	Arbor / Centering Plug	With handle	With handle	With handle	Centering Plug	With handle	With handle	With handle	Arbor	Arbor	Arbor	-	-	-	-	-	Arbor	Arbor	Arbor	With handle
Shank diameter (d)(mm)	-	10 ～ 32	22 ～ 50.8	-	-	16 ～ 60	-	-	-	16 ～ 32	-	32 ～ 42	22 ～ 40	16 ～ 60	-	-	-	20 ～ 25	20 ～ 32	-	32	35 ～ 100	10 ～ 20	MT5-M16 ～ CN50.8	-	22 ～ 55	16 ～ 32	25 ～ 42	25 ～ 32	-	16 ～ 32	16 ～ 32	12 ～ 32	-	-	-	-	-	-	16 ～ 32	-	22 ～ 60	22 ～ 50.8	25.4 ～ 50.8	20 ～ 32
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	38 ～ 100	40 ～ 63	25 ～ 90	-	-	-	-	-	23 ～ 65	-	25.7 ～ 40.7	39.7 ～ 39.9	-	40	-	23 ～ 46	50 ～ 170	-	-	-	50 ～ 64	35 ～ 50	23 ～ 70	-	-	19 ～ 54	-	-	-	-	-	-	-	-	-	-	-	40
Maximum Cutting Depth (Ad)(mm)	2	-	6 ～ 10	-	-	5.5 ～ 10	-	15.4	6.4	-	-	-	-	4 ～ 10	-	-	-	-	15	-	-	9 ～ 16	-	-	0.7 ～ 5	6	10 ～ 15.7	-	-	5.5 ～ 10	1 ～ 5	0.7 ～ 7	1.2 ～ 4.8	-	-	-	-	-	-	-	-	6 ～ 10	6	15.4 ～ 15.7	4 ～ 6
Compatible Tip Material	Carbide Coat	-	Carbide Coat	Carbide Coat	-	Carbide Coat	-	Carbide Coat	Carbide Coat	Carbide Coat / No Carbide Coat	-	-	Carbide Coat	-	Carbide Coat / No Carbide Coat	-	-	Carbide Coat	-	-	-	Carbide Coat	-	Carbide Coat	-	-	Carbide Coat	-	-	-	-	-	Carbide Coat	Carbide Coat	Carbide Coat	-	-	-	-	-	-	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat

Loading...