Square End Mills (HSS)（Machining Application：Inclined Cuts Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (Multi-Flute Center Cut Long Type) CC-EML

  OSG

  General-purpose 4-flute end mill center cut long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	4	60 ～ 195	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,203.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (Multi-Flute Long Shank Short Type) LS-EMS

  OSG

  General-purpose 4-flute end mill long shank short type using cobalt high-speed steel as the base material. It can be used for long protrusion processing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	25 ～ 75	10 ～ 42	4	125 ～ 340	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 3,421.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (Multi-Flute Long Shank Long Type) LS-EML

  OSG

  General-purpose 4-flute long shank end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 40	45 ～ 110	10 ～ 32	4	125 ～ 285	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 3,599.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN

  OSG

  2-flute straight flute end mill medium type for molding using powder metal high-speed steel CPM as the base material. It can be molded into the required shape for use.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1.5 ～ 20	5 ～ 45	6 ～ 20	2	45 ～ 110	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	No torsion	-	Powder high-speed steel	-	Straight

  From: ₹ 2,754.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)

  OSG

  Powder HSS XPM key grooving end mill with V-coating

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 12	5 ～ 15	6 ～ 12	2	50 ～ 70	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Inclined Cuts	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,208.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (2-flute short type) V-XPM-EDS

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2.5 ～ 65	6 ～ 32	2	50 ～ 165	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,362.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM Slim Shank End Mill (2-flute medium type) V-SS-XPM-EDN

  OSG

  Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	15 ～ 50	5 ～ 24	2	85 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,971.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (2-flute medium type) V-XPM-EDN

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	3.5 ～ 45	6 ～ 20	2	55 ～ 125	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,362.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Medium Type) XPM-EDN

  OSG

  2-flute end mill medium type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	3.5 ～ 45	6 ～ 20	2	55 ～ 125	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,672.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (2-flute long type) V-XPM-EDL

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	15 ～ 90	6 ～ 25	2	65 ～ 180	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,102.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Long Type) XPM-EDL

  OSG

  2-flute end mill long type using powder metal high-speed steel XPM as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	2	65 ～ 210	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,097.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN

  OSG

  Long shank end mill with 2 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	2	80 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,533.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM Slim Shank End Mill (4-flute short) V-SS-XPM-EMS

  OSG

  Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	15 ～ 50	5 ～ 24	4	85 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,364.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (4-flute long type) V-XPM-EML

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	15 ～ 90	6 ～ 25	4	65 ～ 180	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,480.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (high-helix short type) V-XPM-EHS

  OSG

  High torsion type with great sharpness. Can be used for a wide range of applications from heavy cutting to finishing cutting.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	6 ～ 55	6 ～ 32	3 ～ 4	55 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,849.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (High Helix Short Type) XPM-EHS

  OSG

  Sharp, high helix type end mill using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	15 ～ 55	8 ～ 32	3 ～ 4	65 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,951.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coating, XPM End Mill (high-helix long type) TIN-XPM-EHL

  OSG

  TiN coating, 50° torsion, long-size end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	25 ～ 105	8 ～ 32	3 ～ 4	75 ～ 200	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	TiN	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 5,639.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM High Helix Long Type V-XPM-EHL

  OSG

  High torsion type long blade series with great sharpness. V coating provides stable tool service life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	25 ～ 105	8 ～ 32	3 ～ 4	75 ～ 200	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	-	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 5,639.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (High Helix Long Type) XPM-EHL

  OSG

  High torsion type long blade series with great sharpness. Powder HSS XPM is used as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	25 ～ 105	8 ～ 32	3 ～ 4	75 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,208.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (Multi-Flute Long Type) XPM-EML

  OSG

  Multi-flute end mill long type using powder metal high-speed steel XPM as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	4	65 ～ 210	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,362.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (2-Flute for Stainless Steel) SUS-EDS

  OSG

  2-flute end mill short type for stainless steel using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1.5 ～ 30	4 ～ 55	6 ～ 25	2	45 ～ 125	general steel[○] / Stainless Steel[◎]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,029.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Flute Extra Long Type EXML

  OSG

  30 to 45° torsion cobalt HSS, extra long type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	30 ～ 150	6 ～ 32	4	70 ～ 235	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 3,205.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OL1)

  OSG

  Powder HSS XPM key grooving end mill with V-coating

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 12	5 ～ 15	6 ～ 12	2	50 ～ 70	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Inclined Cuts	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,208.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For 2-Flute Keyway EX-TIN-EKD (OL1)

  OSG

  TiN coated 2-flute keyway end mill with a cutting diameter tolerance of 0 to -0.02.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: ₹ 2,342.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For 2-Flute Keyway EKD (OL2)

  OSG

  General-purpose 2-flute keyway end mill with a cutting diameter tolerance of -0.02 to -0.04.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: ₹ 1,838.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For 2-Flute Keyway EKD (OL3)

  OSG

  General-purpose 2-flute keyway end mill with a cutting diameter tolerance of -0.04 to -0.06.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Inclined Cuts	Non-Coated	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: ₹ 2,290.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-VS2T, P Coating 2-Flute Short Flute

  SANKO MFG

  [Features]
  · P coating provides excellent surface flatness and abrasion resistance.
  · A 2-flute end mill for finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	8 ～ 55	6 ～ 25	2	50 ～ 135	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Inclined Cuts	For General Steels (AlCrN, etc.)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,883.55
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2T S Coating S-TEC 2-Flute Short Flute

  SANKO MFG

  2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.
  
  

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,898.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2TM S Coating Estech 2-Flute Regular Blade

  SANKO MFG

  [Features]
  · 2-flute finishing endmill with TiCN coating.
  · Can be used widely for milling of grooves, sides, holes, etc.
  · Enables a wide range of machining applications, due to the regular flute length.
  · High grade powder metallurgy HSS with S-coating.
  · Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	10 ～ 55	6 ～ 20	2	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,898.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC2T ESTECH 2-Flute Short Blade

  SANKO MFG

  [Features]
  · A 2-flute end mill for finish machining.
  · Can be used widely for milling of grooves, sides, holes, etc.
  · Uses high grade powder metallurgy HSS.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,476.89
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC2TM ESTECH 2-Flute Regular Blade

  SANKO MFG

  [Features]
  · A 2-flute end mill for finish machining.
  · Can be used widely for milling of grooves, sides, holes, etc.
  · Uses high grade powder metallurgy HSS.
  · Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	10 ～ 55	6 ～ 20	2	60 ～ 130	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,423.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VS2T, 2-Flute Short Blade

  SANKO MFG

  A 2-flutes end mill for finishing.
  Materials: HS-Co (cobalt high-speed steel)
  Outer diameter tolerance: -0.03 to 0
  Helix angle: 30°
  Blade Tip Shape: Sharp Corner

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 60	2 ～ 85	6 ～ 42	2	50 ～ 185	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,566.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VSM2T 2-Flute Regular

  SANKO MFG

  A 2-flute end mill for finish machining. Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 14	10 ～ 35	6 ～ 12	2	50 ～ 90	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,524.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KHB4TS Hybrid Short 4-Flute Blade

  SANKO MFG

  [Features]
  · A 4-flute end mill for finish machining.
  · Abrasion resistance is excellent and high efficiency machining is possible.
  · A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
  · Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
  · Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".
  · Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	15 ～ 55	8 ～ 25	4	60 ～ 135	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Inclined Cuts	For High Hardness (Silicon Group)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 2,980.51
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-VS3T P Coated 3-Flute Short Blade

  SANKO MFG

  [Features]
  · A 3-flute end mill for finish machining.
  · P coating provides excellent surface flatness and abrasion resistance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	10 ～ 55	6 ～ 25	3	50 ～ 135	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Inclined Cuts	For General Steels (AlCrN, etc.)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 2,056.33
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  P-VS4T, P Coating 4-Flute Short Flute

  SANKO MFG

  [Features]
  · A 4-flute end mill for finish machining.
  · P coating provides excellent surface flatness and abrasion resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	10 ～ 55	6 ～ 25	4	50 ～ 135	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Inclined Cuts	For General Steels (AlCrN, etc.)	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 2,056.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4T S Coating STEC 4-Flute Short

  SANKO MFG

  [Features]
  · 4-flute finishing endmill with TiCN coating.
  · High grade powder metallurgy HSS with S-coating.
  · Ideal for Finish Machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 3,164.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STEC4T ESTECH 4-Flute Short Blade

  SANKO MFG

  [Features]
  · Uses high grade powder metallurgy HSS.
  · Ideal for finish machining.
  · A 4-flute end mill for finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,708.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VS4T, 4-Flute Short Blade

  SANKO MFG

  [Features]
  · A 4-flute end mill for finish machining.
  · The outer diameter tolerance is negative (φ2-50).

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	10 ～ 85	6 ～ 42	4	50 ～ 185	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,714.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG
Product Series	End Mill (Multi-Flute Center Cut Long Type) CC-EML	End Mill (Multi-Flute Long Shank Short Type) LS-EMS	End Mill (Multi-Flute Long Shank Long Type) LS-EML	CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN	V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)	V Coating XPM End Mill (2-flute short type) V-XPM-EDS	V Coating XPM Slim Shank End Mill (2-flute medium type) V-SS-XPM-EDN	V Coating XPM End Mill (2-flute medium type) V-XPM-EDN	XPM End Mill (2-Flute Medium Type) XPM-EDN	V Coating XPM End Mill (2-flute long type) V-XPM-EDL	XPM End Mill (2-Flute Long Type) XPM-EDL	XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN	V Coating XPM Slim Shank End Mill (4-flute short) V-SS-XPM-EMS	V Coating XPM End Mill (4-flute long type) V-XPM-EML	V Coating XPM End Mill (high-helix short type) V-XPM-EHS	XPM End Mill (High Helix Short Type) XPM-EHS	TiN Coating, XPM End Mill (high-helix long type) TIN-XPM-EHL	XPM High Helix Long Type V-XPM-EHL	XPM End Mill (High Helix Long Type) XPM-EHL	XPM End Mill (Multi-Flute Long Type) XPM-EML	End Mill (2-Flute for Stainless Steel) SUS-EDS	Multi-Flute Extra Long Type EXML	V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OL1)	For 2-Flute Keyway EX-TIN-EKD (OL1)	For 2-Flute Keyway EKD (OL2)	For 2-Flute Keyway EKD (OL3)	P-VS2T, P Coating 2-Flute Short Flute	SS2T S Coating S-TEC 2-Flute Short Flute	SS2TM S Coating Estech 2-Flute Regular Blade	STEC2T ESTECH 2-Flute Short Blade	STEC2TM ESTECH 2-Flute Regular Blade	VS2T, 2-Flute Short Blade	VSM2T 2-Flute Regular	KHB4TS Hybrid Short 4-Flute Blade	P-VS3T P Coated 3-Flute Short Blade	P-VS4T, P Coating 4-Flute Short Flute	SS4T S Coating STEC 4-Flute Short	STEC4T ESTECH 4-Flute Short Blade	VS4T, 4-Flute Short Blade
From	₹ 2,203.65	₹ 3,421.16	₹ 3,599.31	₹ 2,754.15	₹ 4,208.73	₹ 3,362.24	₹ 3,971.65	₹ 3,362.24	₹ 2,672.44	₹ 4,102.91	₹ 3,097.04	₹ 3,533.67	₹ 4,364.09	₹ 4,480.62	₹ 3,849.76	₹ 2,951.04	₹ 5,639.20	₹ 5,639.20	₹ 4,208.73	₹ 3,362.24	₹ 2,029.53	₹ 3,205.53	₹ 4,208.73	₹ 2,342.95	₹ 1,838.00	₹ 2,290.71	₹ 1,883.55	₹ 2,898.80	₹ 2,898.80	₹ 2,476.89	₹ 2,423.31	₹ 1,566.11	₹ 1,524.76	₹ 2,980.51	₹ 2,056.33	₹ 2,056.33	₹ 3,164.00	₹ 2,708.60	₹ 1,714.78
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more
Blade diameter (D)(φ)	3 ～ 40	10 ～ 50	10 ～ 40	1.5 ～ 20	3 ～ 12	1 ～ 40	6 ～ 25	1 ～ 20	1 ～ 20	3 ～ 30	3 ～ 40	8 ～ 50	6 ～ 25	3 ～ 30	3 ～ 30	6 ～ 30	6 ～ 30	6 ～ 30	6 ～ 30	3 ～ 40	1.5 ～ 30	3 ～ 40	3 ～ 12	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 30	1 ～ 40	3 ～ 20	1 ～ 40	3 ～ 20	1 ～ 60	3 ～ 14	5 ～ 30	3 ～ 30	3 ～ 30	3 ～ 40	3 ～ 40	3 ～ 60
Blade length (ℓ)(mm)	15 ～ 110	25 ～ 75	45 ～ 110	5 ～ 45	5 ～ 15	2.5 ～ 65	15 ～ 50	3.5 ～ 45	3.5 ～ 45	15 ～ 90	15 ～ 110	20 ～ 75	15 ～ 50	15 ～ 90	6 ～ 55	15 ～ 55	25 ～ 105	25 ～ 105	25 ～ 105	15 ～ 110	4 ～ 55	30 ～ 150	5 ～ 15	5 ～ 25	5 ～ 25	5 ～ 25	8 ～ 55	2 ～ 65	10 ～ 55	2 ～ 65	10 ～ 55	2 ～ 85	10 ～ 35	15 ～ 55	10 ～ 55	10 ～ 55	10 ～ 65	10 ～ 65	10 ～ 85
Shank diameter (d)(mm)	6 ～ 32	10 ～ 42	10 ～ 32	6 ～ 20	6 ～ 12	6 ～ 32	5 ～ 24	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 32	6 ～ 42	5 ～ 24	6 ～ 25	6 ～ 32	8 ～ 32	8 ～ 32	8 ～ 32	8 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 12	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 20	6 ～ 32	6 ～ 20	6 ～ 42	6 ～ 12	8 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 42
Number of flutes(sheet)	4	4	4	2	2	2	2	2	2	2	2	2	4	4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	4	2	4	2	2	2	2	2	2	2	2	2	2	2	4	3	4	4	4	4
Overall Length (L)(mm)	60 ～ 195	125 ～ 340	125 ～ 285	45 ～ 110	50 ～ 70	50 ～ 165	85 ～ 160	55 ～ 125	55 ～ 125	65 ～ 180	65 ～ 210	80 ～ 350	85 ～ 160	65 ～ 180	55 ～ 150	65 ～ 150	75 ～ 200	75 ～ 200	75 ～ 200	65 ～ 210	45 ～ 125	70 ～ 235	50 ～ 70	50 ～ 95	50 ～ 95	50 ～ 95	50 ～ 135	50 ～ 150	60 ～ 130	50 ～ 150	60 ～ 130	50 ～ 185	50 ～ 90	60 ～ 135	50 ～ 135	50 ～ 135	50 ～ 150	50 ～ 150	50 ～ 185
work material	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]
Machining Application	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	Non-Coated	-	Non-Coated	Non-Coated	-	-	-	Non-Coated	TiN	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	TiN	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiCN	Non-Coated	Non-Coated
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...