Square HSS End Mills（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  P-XαS P Coating Xα Nick Short Flute

  SANKO MFG

  A semi-fine pitch type roughing end mill. Excellent chip discharge.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  12 ～ 18	30 ～ 40	12 ～ 16	4	110 ～ 140	Quenched and tempered steel[◎]	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 5,793.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Long Type EX-TIN-EDL

  OSG

  TiN coated general-purpose 2-flute end mill long type. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	6 ～ 110	6 ～ 32	2	50 ～ 195	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 3,078.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSP Long High Spiral End Mill G2

  ASAHI TOOLS

  The number of regrinding times is increased by adopting a long blade specification and a sinking sensor shape. "Machining application (machining shape)" side surface/groove," Tool material: "High speed steel, "Work material": General steel/Heat-treated steel/Cast iron/Aluminum/Copper/ Resin, "Helix angle": weak twist (1 to 29°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 60	10 ～ 200	10 ～ 42	4 ～ 6	90 ～ 280	Quenched and tempered steel[○]	Side / Groove	Non-Coated	Square	Weak torsion (15 to 25˚)	Available	Alloy HSS	-	-

  From: ₹ 13,463.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]
  ·High-speed steel roughing short flute length type with standard TiAlN coating
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	13 ～ 45	6 ～ 25	3 ～ 6	57 ～ 121	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiAlN	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,526.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

  MISUMI

  [Features]
  ·High speed steel powder roughing long flute length 4-flute type that can expect for durability
  ·Suitable for deep cavity milling
  ·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiCN
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,135.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GLKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6	10	8	2	60	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: ₹ 2,343.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OL1)

  OSG

  Powder HSS XPM key grooving end mill with V-coating

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 12	5 ～ 15	6 ～ 12	2	50 ～ 70	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,208.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HiVA Powder High-Speed Steel High-Helix

  SANKO MFG

  [Features]
  · Powder HSS is adopted.
  · A high helical type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 32	20 ～ 60	10 ～ 32	3 ～ 4	75 ～ 135	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	23	-

  From: ₹ 2,549.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSP Long High Spiral End Mill MA

  ASAHI TOOLS

  Long flute specifications.
  Adoption of the recessed center shape allows the number of regrinding increased.
  [Processing Application (Processing Shape)]Side/Groove, "Tool Material": High Speed Steel, "Work Material": General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin, "Helix Angle": Weak Helix (1 to 29°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 60	10 ～ 200	10 ～ 32	4 ～ 6	90 ～ 280	Quenched and tempered steel[○]	Side / Groove	Non-Coated	Square	Weak torsion (15 to 25˚)	Available	Alloy HSS	-	-

  From: ₹ 13,463.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • AS
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,906.89
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • TiCN
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 32	13 ～ 53	6 ～ 32	3 ～ 6	57 ～ 133	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,678.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]
  ·High-speed steel roughing end mill that achieves both machining performance and price
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 2,493.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated short flute length type of high speed steel powder roughing that expect durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 30	13 ～ 45	6 ～ 25	3 ～ 5	57 ～ 121	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,094.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

  MISUMI

  [Features]
  ·High speed steel powder roughing long flute length type that can expect durability
  ·Suitable for deep cavity milling
  ·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiCN
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	2	60 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,092.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

  MISUMI

  [Features]
  ·High speed steel powder roughing regular flute length 4-flute type that can expect for durability
  ·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiCN
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	12 ～ 68	6 ～ 25	4	55 ～ 144	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,135.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

  MISUMI

  [Features]
  ·High speed steel powder square uncoated regular flute length 2-flute type that can expect for durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,193.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	2	60 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,329.78
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Heavy AGHV

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	9 ～ 65	6 ～ 32	4 ～ 6	50 ～ 150	Quenched and tempered steel[○]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 3,185.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AG Mill, Roughing, Short AGRES

  NACHI(FUJIKOSHI)

  Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  11 ～ 32	26 ～ 53	12 ～ 32	4 ～ 6	110 ～ 180	Quenched and tempered steel[○]	Side / Groove	AG	Roughing	Standard torsion (30-40°)	-	Cobalt HSS	60	-

  From: ₹ 7,176.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Short Type) XPM-EDS

  OSG

  2-flute end mill short type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 165	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,533.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

  OSG

  Long shank end mill with 4 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	4	80 ～ 350	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,691.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS2TM S Coating Estech 2-Flute Regular Blade

  SANKO MFG

  [Features]
  · 2-flute finishing endmill with TiCN coating.
  · Can be used widely for milling of grooves, sides, holes, etc.
  · Enables a wide range of machining applications, due to the regular flute length.
  · High grade powder metallurgy HSS with S-coating.
  · Enables a wide range of machining applications, due to the regular flute length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 5	10 ～ 15	6	2	60 ～ 65	Quenched and tempered steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,898.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4TL S Coating S TECH 4-Flute Long Flute

  SANKO MFG

  [Features]
  · 4-flute finishing endmill with TiCN coating.
  · Enables a wide range of side machining and deep engraving, due to the long flute length.
  · High grade powder metallurgy HSS with S-coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 7	35 ～ 40	6 ～ 8	4	80	Quenched and tempered steel[◎]	Plane / Side	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 4,447.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSM S Coated Estech Muscle 3-Flute Regular

  SANKO MFG

  [Features]
  · A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.
  · With a unique roughing blade shape, a wide range of machining from heavy duty cutting to finishing machining is possible

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  9	25	12	3	90	Quenched and tempered steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	29	-

  From: ₹ 4,827.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSα S Coating S-Tech α Nick

  SANKO MFG

  Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 10	10 ～ 25	6 ～ 10	4	70 ～ 90	Quenched and tempered steel[◎]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 4,753.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	13 ～ 45	6 ～ 25	3 ～ 5	57 ～ 121	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,610.89
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 3,815.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut

  MISUMI

  The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 3,172.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]
  ·Demonstrates outstanding durability even during high-speed machining where load on tool is large
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 32	13 ～ 53	6 ～ 32	3 ～ 6	57 ～ 133	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,424.07
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  [Features]
  ·Demonstrates outstanding durability even during high-speed machining where load on tool is large
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,827.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]
  ·Demonstrates outstanding durability even during high-speed machining where load on tool is large
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 3,707.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]
  ·Demonstrates outstanding durability even during high-speed machining where load on tool is large
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,996.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  • TiCN
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,181.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]
  ·High speed steel powder roughing long flute length type that can expect durability
  ·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiCN
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 30	45 ～ 90	10 ～ 25	4 ～ 5	95 ～ 166	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,997.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  MISUMI

  [Features]
  ·Long shank type of high speed steel powder that can expect durability
  ·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiCN
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,859.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut

  MISUMI

  [Features]
  ·High-speed steel roughing end mill that achieves both machining performance and price
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  5 ～ 50	13 ～ 75	6 ～ 42	3 ～ 6	57 ～ 177	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,674.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut

  MISUMI

  [Features]
  ·High-speed steel roughing end mill that achieves both machining performance and price
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 50	19 ～ 112	6 ～ 42	3 ～ 6	63 ～ 214	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 2,086.33
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut

  MISUMI

  [Features]
  ·High-speed steel roughing end mill that achieves both machining performance and price
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	45 ～ 150	10 ～ 42	4 ～ 6	95 ～ 252	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Roughing	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 2,568.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

  MISUMI

  [Features]
  ·High speed steel powder roughing uncoated regular flute length type that expect to durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	19 ～ 68	6 ～ 25	3 ～ 5	63 ～ 144	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,517.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

  MISUMI

  [Features]
  ·High speed steel powder roughing uncoated long flute length type that can expect durability
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 25	45 ～ 90	10 ～ 25	4	95 ～ 166	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 3,676.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated long shank blade length type of high speed steel powder roughing that can expect durability
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	11 ～ 45	6 ～ 25	3 ～ 4	80 ～ 160	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Roughing	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,682.35
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short

  MISUMI

  [Features]
  ·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	15 ～ 50	8 ～ 25	3	65 ～ 140	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,944.75
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short

  MISUMI

  [Features]
  ·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	15 ～ 50	8 ～ 25	4	65 ～ 140	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,999.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

  MISUMI

  [Features]
  ·Cutting force is reduced because nicks on peripheral edge divide cutting chips
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 20	15 ～ 45	8 ～ 20	3	65 ～ 125	Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,492.07
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

  MISUMI

  [Features]
  ·Cutting force is reduced because nicks on peripheral edge divide cutting chips
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • AS
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 20	15 ～ 45	8 ～ 20	4	65 ～ 125	Quenched and tempered steel[○]	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Square	Powerful Torsion (45°-60°)	Available	Powder high-speed steel	-	-

  From: ₹ 2,419.75
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANKO MFG	OSG	ASAHI TOOLS	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	SANKO MFG	ASAHI TOOLS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	P-XαS P Coating Xα Nick Short Flute	2-flute Long Type EX-TIN-EDL	HSP Long High Spiral End Mill G2	TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular	G 2-Flute End Mill for Key Groove GLKEY	V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OL1)	HiVA Powder High-Speed Steel High-Helix	HSP Long High Spiral End Mill MA	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	AG Mill, Heavy AGHV	AG Mill, Roughing, Short AGRES	XPM End Mill (2-Flute Short Type) XPM-EDS	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	SS2TM S Coating Estech 2-Flute Regular Blade	SS4TL S Coating S TECH 4-Flute Long Flute	SSM S Coated Estech Muscle 3-Flute Regular	SSα S Coating S-Tech α Nick	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut	AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut	Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model	Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model	Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model	AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short	AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
From	₹ 5,793.24	₹ 3,078.27	₹ 13,463.95	₹ 1,526.51	₹ 1,135.56	₹ 2,343.91	₹ 4,208.73	₹ 2,549.22	₹ 13,463.95	₹ 2,906.89	₹ 1,678.02	₹ 2,493.49	₹ 2,094.58	₹ 1,092.71	₹ 1,135.56	₹ 1,193.16	₹ 1,329.78	₹ 3,185.96	₹ 7,176.29	₹ 2,533.15	₹ 3,691.73	₹ 2,898.80	₹ 4,447.15	₹ 4,827.53	₹ 4,753.85	₹ 2,610.89	₹ 3,815.13	₹ 3,172.49	₹ 2,424.07	₹ 2,827.22	₹ 3,707.38	₹ 2,996.64	₹ 2,181.64	₹ 2,997.51	₹ 2,859.15	₹ 1,674.00	₹ 2,086.33	₹ 2,568.00	₹ 2,517.82	₹ 3,676.58	₹ 2,682.35	₹ 1,944.75	₹ 1,999.65	₹ 2,492.07	₹ 2,419.75
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications				TiAlN S (Short)	TiCN 4 Flutes L (Long)					AS 4 Flutes R (Regular)	TiCN 4 Flutes S (Short)	AS 3 Flutes S (Short)	Non-Coated 4 Flutes S (Short)	TiCN 2 Flutes L (Long)	TiCN 4 Flutes R (Regular)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)									AS 4 Flutes S (Short)	AS 4 Flutes L (Long)	AS 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	AS 3 Flutes S (Short)	TiCN 4 Flutes R (Regular)	TiCN 4 Flutes L (Long)	TiCN 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 3 Flutes S (Short)	AS 3 Flutes S (Short)	AS 4 Flutes S (Short)	AS 3 Flutes S (Short)	AS 4 Flutes S (Short)
Blade diameter (D)(φ)	12 ～ 18	1 ～ 40	10 ～ 60	5 ～ 30	3 ～ 25	6	3 ～ 12	8 ～ 32	10 ～ 60	6 ～ 30	6 ～ 32	6 ～ 30	5 ～ 30	3 ～ 25	3 ～ 25	1 ～ 25	3 ～ 25	3 ～ 40	11 ～ 32	0.8 ～ 40	8 ～ 50	3 ～ 5	6 ～ 7	9	5 ～ 10	6 ～ 30	10 ～ 30	6 ～ 30	5 ～ 32	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	5 ～ 50	6 ～ 50	10 ～ 50	6 ～ 30	10 ～ 25	6 ～ 30	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20
Blade length (ℓ)(mm)	30 ～ 40	6 ～ 110	10 ～ 200	13 ～ 45	15 ～ 90	10	5 ～ 15	20 ～ 60	10 ～ 200	19 ～ 68	13 ～ 53	11 ～ 45	13 ～ 45	15 ～ 90	12 ～ 68	3.5 ～ 60	15 ～ 90	9 ～ 65	26 ～ 53	2 ～ 65	20 ～ 75	10 ～ 15	35 ～ 40	25	10 ～ 25	13 ～ 45	45 ～ 90	11 ～ 45	13 ～ 53	19 ～ 68	45 ～ 90	11 ～ 45	19 ～ 68	45 ～ 90	11 ～ 45	13 ～ 75	19 ～ 112	45 ～ 150	19 ～ 68	45 ～ 90	11 ～ 45	15 ～ 50	15 ～ 50	15 ～ 45	15 ～ 45
Shank diameter (d)(mm)	12 ～ 16	6 ～ 32	10 ～ 42	6 ～ 25	6 ～ 25	8	6 ～ 12	10 ～ 32	10 ～ 32	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	12 ～ 32	6 ～ 32	6 ～ 42	6	6 ～ 8	12	6 ～ 10	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	10 ～ 42	6 ～ 25	10 ～ 25	6 ～ 25	8 ～ 25	8 ～ 25	8 ～ 20	8 ～ 20
Number of flutes(sheet)	4	2	4 ～ 6	3 ～ 6	4	2	2	3 ～ 4	4 ～ 6	3 ～ 5	3 ～ 6	3 ～ 4	3 ～ 5	2	4	2	2	4 ～ 6	4 ～ 6	2	4	2	4	3	4	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 6	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 5	4 ～ 5	3 ～ 4	3 ～ 6	3 ～ 6	4 ～ 6	3 ～ 5	4	3 ～ 4	3	4	3	4
Overall Length (L)(mm)	110 ～ 140	50 ～ 195	90 ～ 280	57 ～ 121	60 ～ 160	60	50 ～ 70	75 ～ 135	90 ～ 280	63 ～ 144	57 ～ 133	80 ～ 160	57 ～ 121	60 ～ 160	55 ～ 144	45 ～ 130	60 ～ 160	50 ～ 150	110 ～ 180	50 ～ 165	80 ～ 350	60 ～ 65	80	90	70 ～ 90	57 ～ 121	95 ～ 166	80 ～ 160	57 ～ 133	63 ～ 144	95 ～ 166	80 ～ 160	63 ～ 144	95 ～ 166	80 ～ 160	57 ～ 177	63 ～ 214	95 ～ 252	63 ～ 144	95 ～ 166	80 ～ 160	65 ～ 140	65 ～ 140	65 ～ 125	65 ～ 125
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Side / Groove	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking
Coating	For General Steels (AlCrN, etc.)	TiN	Non-Coated	TiAlN	TiCN	TiN	-	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	TiCN	For High Hardness (Silicon Group)	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	AG	AG	Non-Coated	Non-Coated	TiCN	TiCN	TiCN	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Blade shape type	Roughing	Square	Square	Roughing	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Roughing	Roughing	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Base Blade Y/N	Available	-	Available	Available	Available	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	23	-	-	-	-	-	-	-	-	-	-	60	-	-	-	-	29	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	Straight	-	-	-	-	Straight	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...