Taper Ball End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L

  NS TOOL

  The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.2 ～ 10	0.1 ～ 5	2	4 ～ 12	50 ～ 140	TiAlN

  From: ₹ 8,194.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper Ball End Type FXS-RB-TPB

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for automobile curved surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	4 ～ 25	0.3 ～ 1.25	multi-edged	3 ～ 6	35 ～ 60	TiAlN

  From: ₹ 14,136.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 2000, UT Coat, 2-Flute Tapered

  UNION TOOL

  [Features]
  · 2-flute taper end mill with extensive variations from taper half angle of 30' to 15°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.2 ～ 2.5	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	0.8 ～ 8	-	2	3 ～ 8	38 ～ 50	TiCN

  From: ₹ 4,727.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper ball end mill 2 blades

  ATOM

  A small diameter taper ball end mill that standardizes maximum taper angles up to 15 degrees.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1° ～ 30′	0.1 ～ 3	Taper ball	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	0.5 ～ 12	0.05 ～ 1.5	2	3 ～ 10	35 ～ 55	-

  From: ₹ 8,282.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Tapered Ball End Mill GTBE

  EIKOSHA

  [Features]
  · For graphite electrode machining.
  · 2-flute type.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	Aluminum[◎] / Copper[◎] / Graphite[◎]	25 ～ 50	2R ～ 6R	2	6 ～ 20	90 ～ 120	Non-Coated

  From: ₹ 12,380.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill

  NS TOOL

  [Features]
  · The lower part of the neck is tapered to improve tool rigidity, and MUGEN COATING Premium is used, which is ideal for milling high hardness material. · These synergistic effects provide deep engraving processing on high-precision and high-efficiency materials with high hardness.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.15 ～ 3	0.1 ～ 2	2	4 ～ 6	50 ～ 110	TiAlN

  From: ₹ 3,595.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

  MISUMI

  [Features]
  ·Essential item for plastic runner fluting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	3 ～ 7	1 ～ 3	2	4 ～ 10	40 ～ 75	For High Hardness (Silicon Group)

  From: ₹ 4,709.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Ball End Mill

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel
  ◎; copper, aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 10	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	10 ～ 35	0.5 ～ 3	2	4 ～ 16	50 ～ 100	Non-Coated

  From: ₹ 10,023.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MTB230 MUGEN-COATING Tapered Ball End Mill

  NS TOOL

  Capable of simultaneous taper machining and ball machining

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1 ～ 15	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	1 ～ 16	0.1 ～ 2	2	4 ～ 10	50 ～ 70	TiAlN

  From: ₹ 8,084.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

  NS TOOL

  The lower part of the neck is tapered to improve the rigidity as compared to the conventional long neck type. Enables high-efficiency machining through the adoption of a unique three-flute blade shape

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.75 ～ 4.5	0.5 ～ 2	3	6	60 ～ 110	For High Hardness (Silicon Group)

  From: ₹ 4,847.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper Ball End Mill

  EIKOSHA

  A tapered ball end mill that uses cemented carbide, making it ideal for profiling the curved surface of molds.
  [Features]
  ·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.
  ·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.
  [Applications]
  ·Used for mold processing, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	4 ～ 40	0.5 ～ 8	2	4 ～ 25	45 ～ 90	Non-Coated

  From: ₹ 7,268.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Long Taper Ball End Mill

  EIKOSHA

  Taper ball end mill long type using carbide.
  [Features]
  ·Compared to high-speed steel, carbide is used, so heat resistance and wear resistance are greatly improved compared to powdered high-speed steel.
  ·Ideal for mold curved surface machining and profiling. Simultaneous processing of draft angle is possible.
  [Applications]
  ·Ideal for curved surface processing of molds, etc.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	-	Taper ball	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Graphite[○]	6 ～ 50	0.5 ～ 5	2	4 ～ 25	55 ～ 150	Non-Coated

  From: ₹ 8,633.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball Long Type DZ-OCLB-T

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°57' ～ 2°52'	4 ～ 12	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	10 ～ 33	2 ～ 6	2	10 ～ 16	160 ～ 280	TiAlN

  From: ₹ 20,711.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Solid Taper Ball End Mill AHTBE

  EIKOSHA

  [Features]
  · For graphite electrode machining.
  · With air hole.
  · 2-flute type.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5ﾟ ～ 30'	-	Taper ball	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	25 ～ 50	2 ～ 6	2	6 ～ 20	90 ～ 120	Non-Coated

  From: ₹ 13,626.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered Neck Ball End Mill KTBL-2

  KYOWA SEIKO

  The neck has a taper for a longer effective length. Ideal for deep engraving.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	0.2 ～ 6	Taper ball	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	0.4 ～ 14	0.1 ～ 3	-	6 ～ 8	100 ～ 120	Non-Coated

  From: ₹ 10,674.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Short MG-TPBDS

  OSG

  Cemented carbide is used for the blade material.
  Blade length (mm) 10
  Corner/ball radius (mm) 1.25, single angle (°) 5
  Big end diameter (mm) 4.04, number of flutes (pcs.) 2
  Shank diameter (mm) 6, overall length (mm) 45

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5	-	Taper ball	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	10	-	-	6	45	Non-Coated

  From: ₹ 12,794.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill

  NS TOOL

  [Features]
  · CBN long neck ball end mill with a taper neck shape for increased rigidity.
  · Both efficiency and accuracy are improved by a deep milled finish due to the spiral ball shape with improved sharpness.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.2 ～ 2	Taper ball	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.15 ～ 1.2	0.1 ～ 1	2	4	50 ～ 53	Non-Coated

  From: ₹ 20,475.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NERB-2 2-Flute Taper Ball End Mill For Runner

  NS TOOL

  Tapered ball end mill suitable for carbon steel to heat-treated steel.
  Tool material, Ultrafine grain cemented carbide
  Helix angle, 30°
  No. of Flutes: 2
  Machining Applications: Side Machining, Grooving, Curved Surface Machining

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  10 ～ 20	-	Taper ball	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 12	1 ～ 3	2	4 ～ 12	50 ～ 90	Non-Coated

  From: ₹ 11,401.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	NS TOOL	OSG	UNION TOOL	ATOM	EIKOSHA	NS TOOL	MISUMI	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	EIKOSHA	DIJET	EIKOSHA	KYOWA SEIKO	OSG	NS TOOL	NS TOOL
Product Series	MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L	For Rib Grooves, Taper Ball End Type FXS-RB-TPB	C-CTE 2000, UT Coat, 2-Flute Tapered	Taper ball end mill 2 blades	Carbide Graphite Solid Tapered Ball End Mill GTBE	MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill	TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute	Taper Ball End Mill	MTB230 MUGEN-COATING Tapered Ball End Mill	MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345	Carbide Solid Taper Ball End Mill	Carbide Solid Long Taper Ball End Mill	One Cut Ball Long Type DZ-OCLB-T	Carbide Air Hole Solid Taper Ball End Mill AHTBE	Carbide Tapered Neck Ball End Mill KTBL-2	2-flute Short MG-TPBDS	SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill	NERB-2 2-Flute Taper Ball End Mill For Runner
From	₹ 8,194.75	₹ 14,136.31	₹ 4,727.07	₹ 8,282.78	₹ 12,380.45	₹ 3,595.11	₹ 4,709.67	₹ 10,023.02	₹ 8,084.91	₹ 4,847.60	₹ 7,268.29	₹ 8,633.49	₹ 20,711.40	₹ 13,626.47	₹ 10,674.95	₹ 12,794.24	₹ 20,475.49	₹ 11,401.09
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications							TS General Steel 2 Flutes
Single corner (θ)(Degree)	0.5 ～ 5	0.5 ～ 2	0.5 ～ 15	1° ～ 30′	1ﾟ ～ 30'	0.5 ～ 2	5 ～ 15	0.5 ～ 10	1 ～ 15	0.5 ～ 2	1ﾟ ～ 30'	1ﾟ ～ 30'	0°57' ～ 2°52'	0.5ﾟ ～ 30'	-	5	0.5 ～ 2	10 ～ 20
Tip diameter (D)(φ)	-	-	0.2 ～ 2.5	0.1 ～ 3	-	-	-	-	-	-	-	-	4 ～ 12	-	0.2 ～ 6	-	0.2 ～ 2	-
Type	Taper ball	Taper ball	Tapered square	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball	Taper ball
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Graphite[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]
Blade length (l)(mm)	0.2 ～ 10	4 ～ 25	0.8 ～ 8	0.5 ～ 12	25 ～ 50	0.15 ～ 3	3 ～ 7	10 ～ 35	1 ～ 16	0.75 ～ 4.5	4 ～ 40	6 ～ 50	10 ～ 33	25 ～ 50	0.4 ～ 14	10	0.15 ～ 1.2	4 ～ 12
R Size(mm)	0.1 ～ 5	0.3 ～ 1.25	-	0.05 ～ 1.5	2R ～ 6R	0.1 ～ 2	1 ～ 3	0.5 ～ 3	0.1 ～ 2	0.5 ～ 2	0.5 ～ 8	0.5 ～ 5	2 ～ 6	2 ～ 6	0.1 ～ 3	-	0.1 ～ 1	1 ～ 3
Number of flutes(sheet)	2	multi-edged	2	2	2	2	2	2	2	3	2	2	2	2	-	-	2	2
Shank diameter (d)(mm)	4 ～ 12	3 ～ 6	3 ～ 8	3 ～ 10	6 ～ 20	4 ～ 6	4 ～ 10	4 ～ 16	4 ～ 10	6	4 ～ 25	4 ～ 25	10 ～ 16	6 ～ 20	6 ～ 8	6	4	4 ～ 12
Overall Length (L)(mm)	50 ～ 140	35 ～ 60	38 ～ 50	35 ～ 55	90 ～ 120	50 ～ 110	40 ～ 75	50 ～ 100	50 ～ 70	60 ～ 110	45 ～ 90	55 ～ 150	160 ～ 280	90 ～ 120	100 ～ 120	45	50 ～ 53	50 ～ 90
Coating	TiAlN	TiAlN	TiCN	-	Non-Coated	TiAlN	For High Hardness (Silicon Group)	Non-Coated	TiAlN	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated

Loading...