Taper Square End Mills (Carbide)（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

  MISUMI

  [Features]
  ·R of tip is also effective in suppressing chipping
  ·Half-moon shape with good discharge of cutting chip even with small diameter
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	-	Taper ball	Quenched and tempered steel[◎]	-	0.1 ～ 0.3	1	4	45	For High Hardness (Silicon Group)

  From: ₹ 3,088.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-4

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 6	Tapered square	Quenched and tempered steel[◎]	20 ～ 35	-	4	6 ～ 12	60 ～ 90	Non-Coated

  From: ₹ 10,461.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / regular

  MISUMI

  [Features]
  ·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	12 ～ 35	-	4	4 ～ 16	60 ～ 90	For High Hardness (Silicon Group)

  From: ₹ 4,050.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper End Type FXS-RB-TPE

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for processing side surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	0.4 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	multi-edged	3 ～ 8	35 ～ 80	TiAlN

  From: ₹ 10,359.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper end mill 2 flutes

  ATOM

  A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1° ～ 30′	0.1 ～ 3	Tapered square	Quenched and tempered steel[○]	0.5 ～ 12	-	2	3 ～ 10	35 ～ 50	-

  From: ₹ 5,737.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 2-flute / regular model

  MISUMI

  [Features]
  ·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 30	0.5 ～ 6	Tapered square	Quenched and tempered steel[◎]	2 ～ 24	-	2	4 ～ 12	50 ～ 70	For High Hardness (Silicon Group)

  From: ₹ 3,289.91
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mill (Trapezoidal Runner) MG-TRC

  OSG

  Tapered blade end mill that can be used for trapezoidal runner processing. High toughness carbide alloy is used.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	Quenched and tempered steel[○]	4 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: ₹ 10,056.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 4000, UT Coat, 4-Flute Tapered

  UNION TOOL

  [Features]
  · Taper end mill with extensive variations from taper half angle of 30' to 7°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: ₹ 5,627.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-2

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 3	Tapered square	Quenched and tempered steel[◎]	10 ～ 20	-	2	4 ～ 16	45 ～ 100	Non-Coated

  From: ₹ 9,291.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper End Mill (Medium)

  EIKOSHA

  Taper square end mill with strong hardness (carbide).
  [Features]
  ·Tapered edge shape for machining inclined parts with equal helix.
  [Applications]
  ·Ideal for taper milling.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 10	Tapered square	Quenched and tempered steel[○]	4 ～ 40	-	2	3 ～ 25	40 ～ 110	Non-Coated

  From: ₹ 5,961.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / for deep ribbing

  MISUMI

  [Features]
  ·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 4 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.4 ～ 2	Tapered square	Quenched and tempered steel[◎]	2 ～ 12	-	4	3 ～ 4	40 ～ 50	For High Hardness (Silicon Group)

  From: ₹ 4,066.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered ball end mill, 4-flute / long model

  MISUMI

  [Features]
  ·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	Quenched and tempered steel[◎]	4 ～ 30	0.3 ～ 1.25	4	4 ～ 6	45 ～ 70	For High Hardness (Silicon Group)

  From: ₹ 4,657.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type FX-MG-TPDS

  OSG

  FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 12	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	2	3 ～ 20	40 ～ 120	TiAlN

  From: ₹ 9,573.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type MG-TPDS

  OSG

  High toughness carbide alloy is used, providing a long service life at medium to low speeds

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	1 ～ 12	Tapered square	Quenched and tempered steel[○]	5 ～ 40	-	2	4 ～ 20	45 ～ 110	Non-Coated

  From: ₹ 8,788.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-flute, Tapered Blade, Short Type MG-TPMS

  OSG

  High toughness carbide alloy is used, providing a long service life at medium to low speeds

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	2 ～ 12	Tapered square	Quenched and tempered steel[○]	8 ～ 30	-	4	4 ～ 12	45 ～ 90	Non-Coated

  From: ₹ 9,633.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-2

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper
  ◎: aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 10	-	2	3 ～ 10	35 ～ 70	Non-Coated

  From: ₹ 7,171.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NER-2 Trapezoidal Runner End Mill

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	Quenched and tempered steel[◎]	5 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: ₹ 8,706.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MTE230 MUGEN-COATING Tapered End Mill

  NS TOOL

  Adopts Infinity coating to achieve a longer life, even for taper machining

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.2 ～ 10	Tapered square	Quenched and tempered steel[◎]	0.8 ～ 35	-	2	4 ～ 20	45 ～ 100	TiAlN

  From: ₹ 5,165.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

  NS TOOL

  NS's original high stiffness design enables high-precision and high-efficiency machining.
  [Work Material]
  ○: Heat-treated steel, hardening steel (Up to 55 HRC), stainless steel, titanium alloy, aluminum alloy, resin
  ◎: Carbon steel, steel alloy/tool steel, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.25 ～ 3	0.2 ～ 3	Tapered square	Quenched and tempered steel[◎]	2 ～ 40	-	4	3 ～ 6	40 ～ 80	TiAlN

  From: ₹ 5,102.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-4

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	Non-Coated

  From: ₹ 7,463.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-2X

  NS TOOL

  [Work Material]
  ○: Stainless steel, aluminum alloy, copper, resin
  ◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	0.5 ～ 2.5	Tapered square	Quenched and tempered steel[◎]	2 ～ 4	-	2	3 ～ 4	35 ～ 45	TiCN

  From: ₹ 8,780.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-4X

  NS TOOL

  [Work Material]
  ○: Stainless steel, aluminum alloy, copper, resin
  ◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	Quenched and tempered steel[◎]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: ₹ 8,926.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Medium Blade End Mill NTEM-2

  NS TOOL

  [Work Material]
  ○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin
  ◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 4	Tapered square	Quenched and tempered steel[◎]	5 ～ 20	-	2	4 ～ 16	50 ～ 90	Non-Coated

  From: ₹ 7,829.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper Medium Blade End Mill NTEM-2X

  NS TOOL

  Medium type taper end mill.
  Tool material, Ultrafine grain cemented carbide
  Helix angle, 30°
  Surface treatment, X coating
  No. of Flutes: 2
  Machining applications: Grooving, side milling

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.5 ～ 6	Tapered square	Quenched and tempered steel[◎]	4 ～ 30	-	2	3 ～ 16	35 ～ 90	Non-Coated

  From: ₹ 10,023.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill CSTE

  EIKOSHA

  Carbide tapered square end mill (carbide).
  [Features]
  · End mill with a tapered blade for machining of inclined parts.
  [Applications]
  · Optimal for milling taper parts.
  · Optimal for tapered-wall machining.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 16	Tapered square	Quenched and tempered steel[○]	2 ～ 65	-	2	3 ～ 32	35 ～ 140	Non-Coated

  From: ₹ 5,844.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill (Long) CSTEL

  EIKOSHA

  [Features]
  · 2-flute carbide solid tapered end mill.
  · Long blade.
  · For wall tapering.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	1 ～ 6	Tapered square	Quenched and tempered steel[○]	10 ～ 35	-	2	4 ～ 12	50 ～ 90	Non-Coated

  From: ₹ 8,217.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	NS TOOL	MISUMI	OSG	ATOM	MISUMI	OSG	UNION TOOL	NS TOOL	EIKOSHA	MISUMI	MISUMI	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	EIKOSHA
Product Series	TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model	Tapered Long Blade End Mill NTEL-4	TSC series carbide tapered end mill, 4-flute / regular	For Rib Grooves, Taper End Type FXS-RB-TPE	Taper end mill 2 flutes	TSC series carbide tapered end mill, 2-flute / regular model	Carbide End Mill (Trapezoidal Runner) MG-TRC	C-CTE 4000, UT Coat, 4-Flute Tapered	Tapered Long Blade End Mill NTEL-2	Carbide Solid Taper End Mill (Medium)	TSC series carbide tapered end mill, 4-flute / for deep ribbing	TSC series carbide tapered ball end mill, 4-flute / long model	2-flute, Tapered Blade, Short Type FX-MG-TPDS	2-flute, Tapered Blade, Short Type MG-TPDS	4-flute, Tapered Blade, Short Type MG-TPMS	Carbide Tapered End Mill NTE-2	NER-2 Trapezoidal Runner End Mill	MTE230 MUGEN-COATING Tapered End Mill	MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing	Carbide Tapered End Mill NTE-4	X Coated Taper End Mill NTE-2X	X Coated Taper End Mill NTE-4X	Tapered Medium Blade End Mill NTEM-2	X Coated Taper Medium Blade End Mill NTEM-2X	Carbide Solid Tapered End Mill CSTE	Carbide Solid Tapered End Mill (Long) CSTEL
From	₹ 3,088.38	₹ 10,461.00	₹ 4,050.65	₹ 10,359.22	₹ 5,737.93	₹ 3,289.91	₹ 10,056.53	₹ 5,627.13	₹ 9,291.71	₹ 5,961.62	₹ 4,066.55	₹ 4,657.15	₹ 9,573.00	₹ 8,788.11	₹ 9,633.27	₹ 7,171.45	₹ 8,706.40	₹ 5,165.04	₹ 5,102.09	₹ 7,463.44	₹ 8,780.05	₹ 8,926.05	₹ 7,829.09	₹ 10,023.02	₹ 5,844.13	₹ 8,217.55
Days to Ship	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications	TS General Steel 2 Flutes S (Short)		TS General Steel 4 Flutes R (Regular)			TS General Steel 2 Flutes R (Regular)					TS General Steel 4 Flutes	TS General Steel 4 Flutes L (Long)
Single corner (θ)(Degree)	-	0.5 ～ 5	0.5 ～ 5	0.5 ～ 3	1° ～ 30′	0.5 ～ 30	7 ～ 15	0.5 ～ 7	0.5 ～ 20	1ﾟ ～ 30'	0.5 ～ 2	0.5 ～ 2	0.5 ～ 20	0.5 ～ 7	0.5 ～ 3	0.5 ～ 20	7 ～ 15	0.5 ～ 20	0.25 ～ 3	0.5 ～ 15	0.5 ～ 5	0.5 ～ 5	0.5 ～ 20	0.5 ～ 15	1ﾟ ～ 30'	1ﾟ ～ 30'
Tip diameter (D)(φ)	-	3 ～ 6	3 ～ 10	0.4 ～ 3	0.1 ～ 3	0.5 ～ 6	2 ～ 6	3 ～ 10	1 ～ 3	0.5 ～ 10	0.4 ～ 2	-	0.5 ～ 12	1 ～ 12	2 ～ 12	0.5 ～ 3	2 ～ 6	0.2 ～ 10	0.2 ～ 3	3 ～ 10	0.5 ～ 2.5	3 ～ 10	1 ～ 4	0.5 ～ 6	0.5 ～ 16	1 ～ 6
Type	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]
Blade length (l)(mm)	-	20 ～ 35	12 ～ 35	2 ～ 40	0.5 ～ 12	2 ～ 24	4 ～ 12	10 ～ 35	10 ～ 20	4 ～ 40	2 ～ 12	4 ～ 30	2 ～ 40	5 ～ 40	8 ～ 30	2 ～ 10	5 ～ 12	0.8 ～ 35	2 ～ 40	10 ～ 35	2 ～ 4	10 ～ 35	5 ～ 20	4 ～ 30	2 ～ 65	10 ～ 35
R Size(mm)	0.1 ～ 0.3	-	-	-	-	-	-	-	-	-	-	0.3 ～ 1.25	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of flutes(sheet)	1	4	4	multi-edged	2	2	2	4	2	2	4	4	2	2	4	2	2	2	4	4	2	4	2	2	2	2
Shank diameter (d)(mm)	4	6 ～ 12	4 ～ 16	3 ～ 8	3 ～ 10	4 ～ 12	4 ～ 12	6 ～ 16	4 ～ 16	3 ～ 25	3 ～ 4	4 ～ 6	3 ～ 20	4 ～ 20	4 ～ 12	3 ～ 10	4 ～ 12	4 ～ 20	3 ～ 6	6 ～ 16	3 ～ 4	6 ～ 16	4 ～ 16	3 ～ 16	3 ～ 32	4 ～ 12
Overall Length (L)(mm)	45	60 ～ 90	60 ～ 90	35 ～ 80	35 ～ 50	50 ～ 70	45 ～ 75	50 ～ 90	45 ～ 100	40 ～ 110	40 ～ 50	45 ～ 70	40 ～ 120	45 ～ 110	45 ～ 90	35 ～ 70	45 ～ 75	45 ～ 100	40 ～ 80	50 ～ 90	35 ～ 45	50 ～ 90	50 ～ 90	35 ～ 90	35 ～ 140	50 ～ 90
Coating	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	TiAlN	-	For High Hardness (Silicon Group)	Non-Coated	TiCN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated

Loading...