Carbide Taper End Mills（work material：High Hardness Steel-HRC60）

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / regular

  MISUMI

  [Features]
  ·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	High Hardness Steel-HRC60[○]	12 ～ 35	-	4	4 ～ 16	60 ～ 90	For High Hardness (Silicon Group)

  From: ₹ 4,050.65
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type FX-MG-TPDS

  OSG

  FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 12	Tapered square	High Hardness Steel-HRC60[○]	2 ～ 40	-	2	3 ～ 20	40 ～ 120	TiAlN

  From: ₹ 9,573.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper Ball End Type FXS-RB-TPB

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for automobile curved surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	High Hardness Steel-HRC60[○]	4 ～ 25	0.3 ～ 1.25	multi-edged	3 ～ 6	35 ～ 60	TiAlN

  From: ₹ 14,136.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill

  NS TOOL

  [Features]
  · The lower part of the neck is tapered to improve tool rigidity, and MUGEN COATING Premium is used, which is ideal for milling high hardness material. · These synergistic effects provide deep engraving processing on high-precision and high-efficiency materials with high hardness.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	High Hardness Steel-HRC60[◎]	0.15 ～ 3	0.1 ～ 2	2	4 ～ 6	50 ～ 110	TiAlN

  From: ₹ 3,595.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute

  MISUMI

  [Features]
  ·Essential item for plastic runner fluting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	1.5 ～ 4	Tapered radius	High Hardness Steel-HRC60[○]	3 ～ 6.5	0 ～ 1	2	4 ～ 8	40 ～ 50	For High Hardness (Silicon Group)

  From: ₹ 4,099.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper End Type FXS-RB-TPE

  OSG

  A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for processing side surfaces.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	0.4 ～ 3	Tapered square	High Hardness Steel-HRC60[○]	2 ～ 40	-	multi-edged	3 ～ 8	35 ～ 80	TiAlN

  From: ₹ 10,359.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSRTN

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°50' ～ 1°	2 ～ 16	Tapered radius	High Hardness Steel-HRC60[◎]	3 ～ 24	0.5 ～ 3	3	6 ～ 20	70 ～ 220	-

  From: ₹ 12,873.27
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill

  NS TOOL

  [Features]
  · CBN long neck ball end mill with a taper neck shape for increased rigidity.
  · Both efficiency and accuracy are improved by a deep milled finish due to the spiral ball shape with improved sharpness.
  

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.2 ～ 2	Taper ball	High Hardness Steel-HRC60[◎]	0.15 ～ 1.2	0.1 ～ 1	2	4	50 ～ 53	Non-Coated

  From: ₹ 20,475.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / for deep ribbing

  MISUMI

  [Features]
  ·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 4 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.4 ～ 2	Tapered square	High Hardness Steel-HRC60[○]	2 ～ 12	-	4	3 ～ 4	40 ～ 50	For High Hardness (Silicon Group)

  From: ₹ 4,066.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered ball end mill, 4-flute / long model

  MISUMI

  [Features]
  ·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	High Hardness Steel-HRC60[○]	4 ～ 30	0.3 ～ 1.25	4	4 ～ 6	45 ～ 70	For High Hardness (Silicon Group)

  From: ₹ 4,657.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute

  MISUMI

  [Features]
  ·Essential item for plastic runner fluting
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  5 ～ 15	-	Taper ball	High Hardness Steel-HRC60[○]	3 ～ 7	1 ～ 3	2	4 ～ 10	40 ～ 75	For High Hardness (Silicon Group)

  From: ₹ 4,709.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

  MISUMI

  [Features]
  ·R of tip is also effective in suppressing chipping
  ·Half-moon shape with good discharge of cutting chip even with small diameter
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	-	Taper ball	High Hardness Steel-HRC60[○]	-	0.1 ～ 0.3	1	4	45	For High Hardness (Silicon Group)

  From: ₹ 3,088.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, taper type with corner rounding FXS-RB-TPCR

  OSG

  A radius end type high-rigidity taper end mill which enables rib grooves to be machined with high efficiency.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	1 ～ 1.5	Tapered radius	High Hardness Steel-HRC60[○]	8 ～ 12	0.2	multi-edged	4	45	TiAlN

  From: ₹ 12,657.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345

  NS TOOL

  The lower part of the neck is tapered to improve the rigidity as compared to the conventional long neck type. Enables high-efficiency machining through the adoption of a unique three-flute blade shape

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	High Hardness Steel-HRC60[◎]	0.75 ～ 4.5	0.5 ～ 2	3	6	60 ～ 110	For High Hardness (Silicon Group)

  From: ₹ 4,847.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball Long Type DZ-OCLB-T

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0°57' ～ 2°52'	4 ～ 12	Taper ball	High Hardness Steel-HRC60[○]	10 ～ 33	2 ～ 6	2	10 ～ 16	160 ～ 280	TiAlN

  From: ₹ 20,711.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	OSG	OSG	NS TOOL	MISUMI	OSG	DIJET	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	OSG	NS TOOL	DIJET
Product Series	TSC series carbide tapered end mill, 4-flute / regular	2-flute, Tapered Blade, Short Type FX-MG-TPDS	For Rib Grooves, Taper Ball End Type FXS-RB-TPB	MRBTNH230 MUGEN COATING Premium 2-Flute Long Tapered Neck Ball End Mill	TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute	For Rib Grooves, Taper End Type FXS-RB-TPE	One Cut Super Radius End Mill DV-OCSRTN	SSPBTN220 CBN Super Spiral Long Taper Neck Ball End Mill	TSC series carbide tapered end mill, 4-flute / for deep ribbing	TSC series carbide tapered ball end mill, 4-flute / long model	TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-flute	TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model	For Rib Grooves, taper type with corner rounding FXS-RB-TPCR	MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345	One Cut Ball Long Type DZ-OCLB-T
From	₹ 4,050.65	₹ 9,573.00	₹ 14,136.31	₹ 3,595.11	₹ 4,099.58	₹ 10,359.22	₹ 12,873.27	₹ 20,475.49	₹ 4,066.55	₹ 4,657.15	₹ 4,709.67	₹ 3,088.38	₹ 12,657.62	₹ 4,847.60	₹ 20,711.40
Days to Ship	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications	TS General Steel 4 Flutes R (Regular)				TS General Steel 2 Flutes				TS General Steel 4 Flutes	TS General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)
Single corner (θ)(Degree)	0.5 ～ 5	0.5 ～ 20	0.5 ～ 2	0.5 ～ 2	5 ～ 15	0.5 ～ 3	0°50' ～ 1°	0.5 ～ 2	0.5 ～ 2	0.5 ～ 2	5 ～ 15	-	0.5 ～ 1.5	0.5 ～ 2	0°57' ～ 2°52'
Tip diameter (D)(φ)	3 ～ 10	0.5 ～ 12	-	-	1.5 ～ 4	0.4 ～ 3	2 ～ 16	0.2 ～ 2	0.4 ～ 2	-	-	-	1 ～ 1.5	-	4 ～ 12
Type	Tapered square	Tapered square	Taper ball	Taper ball	Tapered radius	Tapered square	Tapered radius	Taper ball	Tapered square	Taper ball	Taper ball	Taper ball	Tapered radius	Taper ball	Taper ball
work material	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]
Blade length (l)(mm)	12 ～ 35	2 ～ 40	4 ～ 25	0.15 ～ 3	3 ～ 6.5	2 ～ 40	3 ～ 24	0.15 ～ 1.2	2 ～ 12	4 ～ 30	3 ～ 7	-	8 ～ 12	0.75 ～ 4.5	10 ～ 33
R Size(mm)	-	-	0.3 ～ 1.25	0.1 ～ 2	0 ～ 1	-	0.5 ～ 3	0.1 ～ 1	-	0.3 ～ 1.25	1 ～ 3	0.1 ～ 0.3	0.2	0.5 ～ 2	2 ～ 6
Number of flutes(sheet)	4	2	multi-edged	2	2	multi-edged	3	2	4	4	2	1	multi-edged	3	2
Shank diameter (d)(mm)	4 ～ 16	3 ～ 20	3 ～ 6	4 ～ 6	4 ～ 8	3 ～ 8	6 ～ 20	4	3 ～ 4	4 ～ 6	4 ～ 10	4	4	6	10 ～ 16
Overall Length (L)(mm)	60 ～ 90	40 ～ 120	35 ～ 60	50 ～ 110	40 ～ 50	35 ～ 80	70 ～ 220	50 ～ 53	40 ～ 50	45 ～ 70	40 ～ 75	45	45	60 ～ 110	160 ～ 280
Coating	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiAlN	-	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	TiAlN

Loading...