Radius End Mills (Carbide)（Torsion Angle (θ)：Standard torsion (30-40°)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X

  7 LEADERS

  [Features]
  · Also use the 4-flute short radius end mill to prevent tip chipping.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.
  · It supports high-speed side cutting.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 4	3 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

  7 LEADERS

  [Features]
  · Also use the 2-flute medium shank radius end mill to prevent tip chipping.
  · Enables radius cutting deep into the work materials.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 4	10 ～ 55	2	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	3 ～ 20	-	Plane / Side / Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	2 ～ 40	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	17 ～ 45	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

  OSG

  High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12	1	18	3	90	Aluminum[◎] / Copper[◎] / Resin[○]	12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 20,195.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X

  7 LEADERS

  [Features]
  · Also use the 4-flute medium shank radius end mill to prevent tip chipping.
  · Enables radius cutting deep into the work materials.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.
  · It supports high-speed side cutting.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 4	10 ～ 55	4	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	3 ～ 20	-	Plane / Side / Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 30	2	50 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 1,336.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

  MISUMI

  Small radius type that prevents cutter marks on resin

  • Non-Coated
  • Resin
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 10	0.2	3 ～ 30	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	3 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 2,434.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 4	0.1 ～ 1	6 ～ 11	2	40 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 9,132.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

  SANDVIK

  [Features]
  · Twice the cutting depth that was conventionally possible
  · Ideal for everything from shoulder cutting to full grooving.
  · With reinforced edge lines, assures long product life even with intense machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	0.5 ～ 2	-	4	57 ～ 72	general steel[○] / Cast Iron[○]	6 ～ 12	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 9,432.36
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 3	8 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 1,736.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	1.5 ～ 18	2	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	14 ～ 45	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / regular model

  MISUMI

  [Features]
  ·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 36	4	45 ～ 85	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	23 ～ 55	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.3 ～ 2	13 ～ 26	3	50 ～ 75	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 7,561.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

  OSG

  Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 10	0.2 ～ 2	6 ～ 20	4	50 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 10	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 8,044.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill, Regular, 4-Flute Corner R 3562

  GUHRING

  [Features]
  · Ideal for corner rounding of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	-	-	4	57 ～ 104	-	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 10,265.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBRE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 6	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 16,655.33
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSER-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 4	-	1 ～ 40	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 5,680.35
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute short for Aluminum Alloy with Internal Coolant Supply

  OSG

  [Features]
  · For all types of machining from rough machining to finishing.
  · Maximizes the performance of high-power output machinery.
  · Ideal for high-efficiency machining of the large-type aluminum parts used in aircraft.
  · Ideal for aluminum alloys
  · DLC coating.
  · The sharp edges provide excellent cutting performance. (Thin film thickness of 1 μm)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  20 ～ 25	1 ～ 5	30 ～ 37.5	3	100	Aluminum[◎]	20 ～ 25	55	-	DLC	radius	Standard torsion (30-40°)	-

  From: ₹ 29,917.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

  MISUMI

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.005

  From: ₹ 3,161.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute stub model

  MISUMI

  [Features]
  ·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 3	3 ～ 18	2	35 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01

  From: ₹ 2,306.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / regular model

  MISUMI

  [Features]
  ·General purpose 2-flute end mill with regular flute length type with cutting edge radius
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	3 ～ 60	2	45 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	23 ～ 55	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 1	3 ～ 18	4	35 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 2,464.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill 4-Flute / Stub Type

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	1.5 ～ 18	4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	14 ～ 45	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / short model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2 ～ 24	4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	17 ～ 45	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

  MISUMI

  [Features]
  ·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 3	0.05 ～ 0.5	0.16 ～ 6	2	40 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 6	1 ～ 60	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Standard torsion (30-40°)	±0.005 ～ ±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

  MISUMI

  The diamond coated radius shape that's ideal for shaping graphite

  • DIA
  • Graphite
  • 4 Flutes
  • Long

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 3	30 ～ 60	4	150 ～ 200	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	6 ～ 12	60 ～ 85	Plane / Side / Curved surface / Inclined Cuts	Dia Coat	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 15,280.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill, Radius 2DLCM-R

  NACHI(FUJIKOSHI)

  End mill for aluminum and copper alloys. Capable of rounding corners of grooves.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3	0.2	8	2	45	Aluminum[◎] / Copper[○]	6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	DLC	radius	Standard torsion (30-40°)	-0.014～-0.028

  From: ₹ 5,830.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL radius GS4-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and high-speed contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 10	0.5	7.5 ～ 22	4	45 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 10	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	0～-0.030 ～ 0～-0.015

  From: ₹ 6,120.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2.5	0.1	0.7 ～ 3.7	2	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6	1.5 ～ 5	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,970.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  16 ～ 20	2	48 ～ 56	2	140 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	16 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 71,461.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated 2Flutes Long Shank

  OSG

  Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 11	0.3 ～ 1	10 ～ 22	2	100 ～ 180	Graphite[◎]	4 ～ 10	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Dia Coat	radius	Standard torsion (30-40°)	-

  From: ₹ 24,552.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

  OSG

  Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[○] / Resin[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	DLC	radius	Standard torsion (30-40°)	-

  From: ₹ 8,833.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

  OSG

  Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  8 ～ 10	0.3 ～ 2	16 ～ 20	6	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	8 ～ 10	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 12,989.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Radius End Mill 2-Flute

  ATOM

  Simultaneously machines rounded corners and straight base surfaces. High precision radius shape smoothly connects the straight part with the rounded part.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	0.1 ～ 2	3 ～ 15	2	45 ～ 60	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	4 ～ 6	-	Plane / Side / Curved surface	Non-Coated	radius	Standard torsion (30-40°)	±0.02 ～ ±0.05

  From: ₹ 5,116.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2 End Mill with Corner R, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  The adoption of a long shank allows for corner rounding in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Groove	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 4,911.91
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2A End Mill with Corner R, 2-Flute, OK Coated

  OKAZAKI SEIKO

  The adoption of a long shank allows for corner rounding in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	6 ～ 12	-	Plane / Groove	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,369.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill, Regular, 2-Flute Corner R 3561

  GUHRING

  [Features]
  · Ideal for corner rounding of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	-	-	2	57 ～ 104	-	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: ₹ 79,999.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722

  GUHRING

  [Features]
  · Diamond coated endmill suitable for graphite or plastic.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	-	10 ～ 22	2	57 ～ 83	-	6 ～ 12	21 ～ 38	-	Dia Coat	radius	Standard torsion (30-40°)	-

  From: ₹ 22,748.24
  Days to Ship: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723

  GUHRING

  [Features]
  · Diamond coated endmill suitable for graphite or plastic.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	-	13 ～ 26	4	57 ～ 83	-	6 ～ 12	21 ～ 38	-	Dia Coat	radius	Standard torsion (30-40°)	-

  From: ₹ 70,587.53
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

  GUHRING

  [Features]
  · Capable of machining hardened materials of hardness exceeding 60 HRC.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	0.5 ～ 2	-	4	57 ～ 92	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	6 ～ 16	21 ～ 44	-	Other	radius	Standard torsion (30-40°)	-

  From: ₹ 5,833.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

  SANDVIK

  Unique shape exhibits high performance

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 16	0.2 ～ 3	2 ～ 16	2 ～ 4	57 ～ 150	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC60[○]	6 ～ 16	4 ～ 42	Groove	AlTiN	radius / Long-Neck Radius	Standard torsion (30-40°)	-

  From: ₹ 9,136.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBREF-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 3	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 15,952.15
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBRE-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  High-efficiency machining is possible with high feed.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	-	1.5 ～ 2	3	50 ～ 70	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: ₹ 28,687.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBREF-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  High-efficiency machining is possible with high feed.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 2	-	0.5 ～ 1.5	3	50	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: ₹ 18,766.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSR-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	-	3 ～ 13	2	40 ～ 50	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 5,116.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	7 LEADERS	7 LEADERS	MISUMI	OSG	7 LEADERS	MISUMI	MISUMI	OSG	SANDVIK	MISUMI	MISUMI	MISUMI	OSG	OSG	GUHRING	KYOWA SEIKO	KYOWA SEIKO	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	ATOM	OKAZAKI SEIKO	OKAZAKI SEIKO	GUHRING	GUHRING	GUHRING	GUHRING	SANDVIK	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO
Product Series	Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X	Carbide 2-Flute Corner Radius Medium End Mill 30° B257X	TSC series carbide radius end mill, 2-flute / short model	Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys	Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X	(Economy series) XAL series carbide radius end mill, 2-flute / short model	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730	(Economy series) XAL series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	TSC series carbide radius end mill, 4-flute / regular model	3 Flutes Short for Copper & Aluminum Alloys	Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)	Square End Mill, Regular, 4-Flute Corner R 3562	CBN 2-Flute Corner Radius End Mill SBRE-2	End Mill with 2 Carbide Flutes and Corner Radius KSER-2	3-flute short for Aluminum Alloy with Internal Coolant Supply	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / regular model	TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type	TSC Series Carbide Radius End Mill 4-Flute / Stub Type	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model	DLC Mill, Radius 2DLCM-R	GS MILL radius GS4-R	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius	Diamond Coated 2Flutes Long Shank	Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation	Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius	Radius End Mill 2-Flute	SCD2 End Mill with Corner R, 2-Flute, Non-Coated	SCD2A End Mill with Corner R, 2-Flute, OK Coated	Square End Mill, Regular, 2-Flute Corner R 3561	Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722	Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723	Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361	CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut	CBN 2-Flute Corner Radius End Mill SBREF-2	CBN 3-Flute Corner Radius End Mill SBRE-3	CBN 3-Flute Corner Radius End Mill SBREF-3	End Mill with 2 Carbide Flutes and Corner Radius KSR-2
From	₹ 2,426.95	₹ 2,426.95		₹ 20,195.73	₹ 2,426.95	₹ 1,336.00	₹ 2,434.20	₹ 9,132.35	₹ 9,432.36	₹ 1,736.00			₹ 7,561.24	₹ 8,044.75	₹ 10,265.09	₹ 16,655.33	₹ 5,680.35	₹ 29,917.05	₹ 3,161.31	₹ 2,306.27		₹ 2,464.00				₹ 15,280.00	₹ 5,830.80	₹ 6,120.11	₹ 6,970.56	₹ 71,461.04	₹ 24,552.78	₹ 8,833.65	₹ 12,989.80	₹ 5,116.45	₹ 4,911.91	₹ 6,369.16	₹ 79,999.20	₹ 22,748.24	₹ 70,587.53	₹ 5,833.04	₹ 9,136.36	₹ 15,952.15	₹ 28,687.11	₹ 18,766.22	₹ 5,116.45
Days to Ship	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	23 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Specifications			TS General Steel 2 Flutes S (Short)			XAL General Steel 2 Flutes	Non-Coated Resin 2 Flutes R (Regular)			XAL General Steel 4 Flutes	TS General Steel 2 Flutes B (Stub)	TS General Steel 4 Flutes R (Regular)							TS General Steel 4 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 2 Flutes	DIA Graphite 4 Flutes Long
Blade diameter (D)(φ)	1 ～ 20	3 ～ 20	1 ～ 20	12	3 ～ 20	1 ～ 12	1 ～ 10	2 ～ 4	-	3 ～ 20	1 ～ 12	1 ～ 12	6 ～ 12	3 ～ 10	6 ～ 20	0.3 ～ 6	1 ～ 4	20 ～ 25	2 ～ 6	2 ～ 12	1 ～ 20	2 ～ 12	1 ～ 12	1 ～ 12	0.2 ～ 3	6 ～ 12	3	3 ～ 10	0.5 ～ 2.5	16 ～ 20	5 ～ 11	3 ～ 20	8 ～ 10	1 ～ 6	4 ～ 12	4 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	3 ～ 16	2 ～ 16	0.3 ～ 3	3 ～ 6	0.3 ～ 2	1 ～ 6
R Size(mm)	0.1 ～ 4	0.1 ～ 4	0.1 ～ 3	1	0.1 ～ 4	0.1 ～ 3	0.2	0.1 ～ 1	0.5 ～ 2	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.3 ～ 2	0.2 ～ 2	-	-	-	1 ～ 5	0.2 ～ 0.5	0.2 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.1 ～ 3	0.05 ～ 0.5	0.5 ～ 3	0.2	0.5	0.1	2	0.3 ～ 1	0.5 ～ 3	0.3 ～ 2	0.1 ～ 2	0.2 ～ 2	0.2 ～ 2	-	-	-	0.5 ～ 2	0.2 ～ 3	-	-	-	-
Blade length (ℓ)(mm)	3 ～ 38	10 ～ 55	2 ～ 40	18	10 ～ 55	3 ～ 30	3 ～ 30	6 ～ 11	-	8 ～ 38	1.5 ～ 18	3 ～ 36	13 ～ 26	6 ～ 20	-	0.3 ～ 2	1 ～ 40	30 ～ 37.5	3 ～ 9	3 ～ 18	3 ～ 60	3 ～ 18	1.5 ～ 18	2 ～ 24	0.16 ～ 6	30 ～ 60	8	7.5 ～ 22	0.7 ～ 3.7	48 ～ 56	10 ～ 22	4.5 ～ 30	16 ～ 20	3 ～ 15	12 ～ 36	12 ～ 36	-	10 ～ 22	13 ～ 26	-	2 ～ 16	0.3 ～ 2	1.5 ～ 2	0.5 ～ 1.5	3 ～ 13
Number of flutes(sheet)	4	2	2	3	4	2	2	2	4	4	2	4	3	4	4	2	2	3	4	2	2	4	4	4	2	4	2	4	2	2	2	3	6	2	2	2	2	2	4	4	2 ～ 4	2	3	3	2
Overall Length (L)(mm)	50 ～ 100	50 ～ 160	40 ～ 110	90	50 ～ 160	50 ～ 75	50 ～ 80	40 ～ 70	57 ～ 72	50 ～ 100	40 ～ 75	45 ～ 85	50 ～ 75	50 ～ 70	57 ～ 104	50 ～ 60	50 ～ 80	100	50	35 ～ 60	45 ～ 125	35 ～ 60	40 ～ 75	40 ～ 75	40 ～ 100	150 ～ 200	45	45 ～ 70	50	140 ～ 160	100 ～ 180	50 ～ 125	60 ～ 70	45 ～ 60	70 ～ 110	70 ～ 110	57 ～ 104	57 ～ 83	57 ～ 83	57 ～ 92	57 ～ 150	50 ～ 60	50 ～ 70	50	40 ～ 50
work material	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	-	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Graphite[◎]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	-	-	-	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC60[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]
Shank diameter (d)(mm)	4 ～ 20	3 ～ 20	4 ～ 20	12	3 ～ 20	4 ～ 12	3 ～ 10	4 ～ 6	6 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	6 ～ 12	6 ～ 10	6 ～ 20	6	4 ～ 6	20 ～ 25	6	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 6	6 ～ 12	6	6 ～ 10	6	16 ～ 20	4 ～ 10	6 ～ 20	8 ～ 10	4 ～ 6	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	6 ～ 16	6 ～ 16	4	6	4	4 ～ 6
Underneck length (ℓ1)(mm)	-	-	17 ～ 45	-	-	-	-	-	-	-	14 ～ 45	23 ～ 55	-	-	-	-	-	55	-	-	23 ～ 55	-	14 ～ 45	17 ～ 45	1 ～ 60	60 ～ 85	-	-	1.5 ～ 5	-	-	-	-	-	-	-	-	21 ～ 38	21 ～ 38	21 ～ 44	4 ～ 42	-	-	-	-
Machining Application	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	-	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	-	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Groove	Plane / Groove	-	-	-	-	Groove	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts
Coating	-	-	For High Hardness (Silicon Group)	Non-Coated	-	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	TiAlN	-	Non-Coated	Non-Coated	DLC	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Dia Coat	DLC	TiAlN	TiAlN	TiAlN	Dia Coat	DLC	TiAlN	Non-Coated	Non-Coated	TiAlN	-	Dia Coat	Dia Coat	Other	AlTiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Type	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Tapered neck radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius / Long-Neck Radius	radius	High-Feed Radius	High-Feed Radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
R Precision(μm)	0～-20	0～-20	±0.01 ～ ±0.02	-	0～-20	±0.02	±0.02	-	-	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	-	-	-	-	-	-	±0.005	±0.01	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.02	-0.014～-0.028	0～-0.030 ～ 0～-0.015	-	-	-	-	-	±0.02 ～ ±0.05	-	-	-	-	-	-	-	-	-	-	-

Loading...