• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Radius

  OSG

  The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

  From: ₹ 15,389.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

  OSG

  Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  From: ₹ 18,126.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 6,160.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,792.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
  ·Long neck type is ideal for deep cavity milling of deep pockets, etc.
  ·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,818.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  From: ₹ 6,970.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  From: ₹ 6,324.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  From: ₹ 5,881.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

  MISUMI

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  From: ₹ 8,543.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,968.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

  From: ₹ 5,153.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

  From: ₹ 4,976.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 4,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]
  ·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
  ·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
  ·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  From: ₹ 3,449.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 3,064.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  From: ₹ 5,120.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

  MISUMI

  By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

  From: ₹ 4,614.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Taper neck is effective in suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  From: ₹ 5,351.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

  MISUMI

  The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

  From: ₹ 5,324.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

  MISUMI

  [Features]
  ·High helix angle end mill with radius for machining high hardness steel
  ·High tool rigidity minimizes tool tilt during side milling
  ·Machining of high hardness steel up to 65HRC is possible
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Radius GSH-R

  NACHI(FUJIKOSHI)

  Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.

  From: ₹ 8,349.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4GEOLS-R

  NACHI(FUJIKOSHI)

  Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.

  From: ₹ 8,195.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL radius GS4-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and high-speed contour machining of molds and machine parts.

  From: ₹ 5,077.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4XSGEO-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and contour machining of molds and machine parts.

  From: ₹ 6,922.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Short with Corner Radius

  OSG

  2-Flute Short Corner Radius CBN-CR-EDS
  ·Demonstrates high performance in machining high-rigid materials

  From: ₹ 28,501.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius

  OSG

  Adopts an ultra-heat-resistant and ultra-hard WXS coating

  From: ₹ 13,526.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  From: ₹ 17,574.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  From: ₹ 8,449.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank

  OSG

  Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.

  From: ₹ 13,104.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  From: ₹ 12,649.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXS Coated Multiple Flutes Short Super

  OSG

  Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.

  From: ₹ 17,934.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

  OSG

  Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

  From: ₹ 11,058.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose

  OSG

  Capable of high-efficiency, high-precision machining of wide standing walls using step cutting

  From: ₹ 17,140.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Multi-function type radius end mill capable of high speed machining of high hardness materials up to 65 HRC due to the effects of OK hard coating.

  From: ₹ 6,369.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSR

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  From: ₹ 14,806.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

  GUHRING

  [Features]
  · Capable of machining hardened materials of hardness exceeding 60 HRC.

  From: ₹ 5,833.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

  SANDVIK

  Unique shape exhibits high performance

  From: ₹ 9,136.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBRE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  From: ₹ 16,655.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBREF-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  From: ₹ 15,952.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBRE-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  High-efficiency machining is possible with high feed.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  From: ₹ 28,687.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBREF-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  High-efficiency machining is possible with high feed.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  From: ₹ 18,766.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL VL Long Shank Radius 1.5D GSXVLLS4-R-1.5D

  NACHI(FUJIKOSHI)

  [Features]
  · Minimizes chattering during machining on vertical walls or deep engraving, allowing highly efficient high-quality machining to be performed.
  · For steel.
  

  From: ₹ 8,047.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL VL Multi-blade Radius 2.5D GSXVL6-R-2.5D

  NACHI(FUJIKOSHI)

  [Features]
  · Unequal division and unequal lead enable high-speed and high-grade processing.
  · For steel.
  

  From: ₹ 9,549.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SHR320 CBN High Efficiency Radius End Mill

  NS TOOL

  [Features]
  · 3 flutes and spiral-shaped corner R provide high accuracy and high efficiency machining.
  

  From: ₹ 15,397.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR

  THE CUT

  [Features]
  · Employs a special coating with excellent wear and heat resistance, good smoothness and non-welding properties.
  · Can be used for a wide range of machining from raw materials through to difficult-to-cut materials.
  · The innovative blade shape, the use of the hardest form of carbide and the special coating all combine to allow for high speeds and high feed rates.

  From: ₹ 11,391.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OKAZAKI SEIKO	DIJET	GUHRING	SANDVIK	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NS TOOL	THE CUT
Product Series	CBN End Mills 2 Flutes Radius	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	WX Super Radius End Mills	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	GS MILL Hard Radius GSH-R	X's Mill Geo Radius 4GEOLS-R	GS MILL radius GS4-R	X's Mill Geo Radius 4XSGEO-R	CBN End Mills 2 Flutes Short with Corner Radius	Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	WXS Coated Multiple Flutes Short Super	Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose	SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated	One Cut Super Radius End Mill DV-OCSR	Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361	CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut	CBN 2-Flute Corner Radius End Mill SBRE-2	CBN 2-Flute Corner Radius End Mill SBREF-2	CBN 3-Flute Corner Radius End Mill SBRE-3	CBN 3-Flute Corner Radius End Mill SBREF-3	GSX MILL VL Long Shank Radius 1.5D GSXVLLS4-R-1.5D	GSX MILL VL Multi-blade Radius 2.5D GSXVL6-R-2.5D	SHR320 CBN High Efficiency Radius End Mill	Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR
From	₹ 15,389.98	₹ 18,126.36	₹ 6,160.53	₹ 4,792.00	₹ 4,818.16	₹ 6,970.56	₹ 6,324.96	₹ 5,881.64	₹ 8,543.31	₹ 4,968.22	₹ 5,153.05	₹ 4,976.00	₹ 4,560.00	₹ 3,449.82	₹ 3,064.13	₹ 5,120.00	₹ 4,614.55	₹ 5,351.82	₹ 5,324.73		₹ 8,349.33	₹ 8,195.84	₹ 5,077.76	₹ 6,922.87	₹ 28,501.31	₹ 13,526.89	₹ 17,574.55	₹ 8,449.25	₹ 13,104.98	₹ 12,649.58	₹ 17,934.84	₹ 11,058.38	₹ 17,140.58	₹ 6,369.16	₹ 14,806.02	₹ 5,833.04	₹ 9,136.36	₹ 16,655.33	₹ 15,952.15	₹ 28,687.11	₹ 18,766.22	₹ 8,047.05	₹ 9,549.85	₹ 15,397.85	₹ 11,391.95
Days to Ship	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications
Blade diameter (D)(φ)	0.5 ～ 3	1 ～ 5	4 ～ 20	2 ～ 20	4 ～ 12	0.5 ～ 2.5	1 ～ 12	2 ～ 13	4 ～ 12	4 ～ 12	4 ～ 12	2 ～ 12	2 ～ 12	3 ～ 12	2 ～ 12	4 ～ 16	3 ～ 12	3 ～ 12	2 ～ 6	6 ～ 12	6 ～ 20	3 ～ 20	3 ～ 12	3 ～ 20	3 ～ 6	6 ～ 20	6 ～ 12	3 ～ 20	6 ～ 12	6	6 ～ 25	6 ～ 25	10	4 ～ 12	2 ～ 20	3 ～ 16	2 ～ 16	0.3 ～ 6	0.3 ～ 3	3 ～ 6	0.3 ～ 2	3 ～ 20	6 ～ 20	0.5 ～ 2	6 ～ 16
R Size(mm)	0.05 ～ 0.5	0.3 ～ 1	0.813 ～ 2.607	0.5 ～ 3	1 ～ 2	0.1	0.1 ～ 3	0.5 ～ 3	0.813 ～ 2.438	0.813 ～ 2.438	0.813 ～ 2.438	0.5 ～ 2	0.5 ～ 2	0.75 ～ 3	0.5 ～ 2	1 ～ 3	0.8 ～ 2	0.8 ～ 2	0.2 ～ 0.5	0.5 ～ 2	0.2 ～ 2	0.2 ～ 2	0.2 ～ 2	0.2 ～ 3	0.2 ～ 2	1.5 ～ 3	0.2	0.2 ～ 3	0.5 ～ 1	0.3	0.2 ～ 3	0.3 ～ 5	0.5	0.5 ～ 2	0.5 ～ 3	0.5 ～ 2	0.2 ～ 3	-	-	-	-	0.2 ～ 3	0.3 ～ 3	0.1 ～ 0.3	0.5 ～ 2
Blade length (ℓ)(mm)	0.3 ～ 1.8	2 ～ 10	8 ～ 40	4 ～ 40	8 ～ 24	0.7 ～ 3.7	2.5 ～ 26	0.8 ～ 5.5	8 ～ 24	8 ～ 24	8 ～ 24	2 ～ 12	4 ～ 24	1.2 ～ 5	2 ～ 12	6 ～ 24	4.5 ～ 18	4.5 ～ 18	3 ～ 9	5 ～ 12	13 ～ 38	4.5 ～ 30	7.5 ～ 26	8 ～ 38	3 ～ 6	12 ～ 40	13 ～ 26	5 ～ 30	9 ～ 18	13	15 ～ 50	12 ～ 50	15	8 ～ 24	4 ～ 40	-	2 ～ 16	0.3 ～ 2	0.3 ～ 2	1.5 ～ 2	0.5 ～ 1.5	4.5 ～ 30	15 ～ 50	0.25 ～ 1	17 ～ 45
Number of flutes(sheet)	2	3	4	4	3	2	2	3 ～ 4	3	3	4	3	3	4	4	4	3	4	4	6	6 ～ 8	4	4	4	2	3	4	4	4	4	6 ～ 8	6	4	4	3	4	2 ～ 4	2	2	3	3	4	6	-	5
Overall Length (L)(mm)	45 ～ 50	60 ～ 70	50 ～ 150	50 ～ 130	70 ～ 140	50	40 ～ 110	60 ～ 110	50 ～ 100	80 ～ 160	80 ～ 160	50 ～ 100	50 ～ 100	60 ～ 110	50 ～ 100	70 ～ 180	80 ～ 160	80 ～ 160	50	60 ～ 85	50 ～ 100	60 ～ 200	45 ～ 75	50 ～ 125	45 ～ 50	80 ～ 150	90 ～ 110	60 ～ 160	50 ～ 80	60	90 ～ 180	50 ～ 120	130	70 ～ 110	70 ～ 185	57 ～ 92	57 ～ 150	50 ～ 60	50 ～ 60	50 ～ 70	50	60 ～ 160	50 ～ 100	50 ～ 52	60 ～ 110
work material	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]
Shank diameter (d)(mm)	4 ～ 6	6	6 ～ 20	4 ～ 20	4 ～ 12	6	4 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 16	6 ～ 16	6 ～ 16	6	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6	6 ～ 25	6 ～ 25	8	6 ～ 12	6 ～ 20	6 ～ 16	6 ～ 16	6	4	6	4	6 ～ 20	6 ～ 20	4	6 ～ 16
Underneck length (ℓ1)(mm)	1.5 ～ 6	4 ～ 15	-	-	28 ～ 90	1.5 ～ 5	-	5 ～ 24	-	35 ～ 108	35 ～ 108	-	-	7.5 ～ 24	-	28 ～ 120	24 ～ 105	24 ～ 105	-	11 ～ 55	-	12 ～ -	-	-	-	-	-	9 ～ 60	-	-	-	-	-	15 ～ 42	6 ～ 15	21 ～ 44	4 ～ 42	-	-	-	-	15 ～ 100	-	1.5 ～ 10	-
Machining Application	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Groove	Side / Curved surface	-	Groove	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	-	-	Plane / Groove	Side / Curved surface
Coating	-	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	-	Other	AlTiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	Other
Type	radius	radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	Tapered neck radius	Tapered neck radius	High-Feed Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius / Long-Neck Radius	radius	radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	High-Feed Radius
Torsion Angle (θ)	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Other	Other	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)
R Precision(μm)	-	-	-	±0.015	±0.015	-	-	-	-	-	-	±0.015	±0.015	±0.02	±0.015	±0.015	±0.02	±0.02	±0.005	±0.02	-	-0.032～-0.059 ～ -0.014～-0.028	0～-0.030 ～ 0～-0.015	-0.032～-0.059 ～ -0.014～-0.028	-	-	-	-	-	-	-	-	-	-	0.015～-0.015	-	-	-	-	-	-	-	-	-0.005 to 0.005	-

Loading...