Radius End Mills (Carbide)（Machining Application：Plunging (Z feed)）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10	0.3	-	4	90	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	10	-	Plunging (Z feed)	-	-	-	10

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

  MISUMI

  The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	3	40 ～ 80	Aluminum[◎] / Copper[○] / Resin[○]	4 ～ 12	23 ～ 50	Plunging (Z feed)	DLC	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

  MISUMI

  Radius type that's also effective in preventing cutter marks

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	3	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 12	23 ～ 50	Plunging (Z feed)	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10 ～ 20	0.5 ～ 1	10 ～ 20	2	32 ～ 58	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plunging (Z feed)	For General Steels (AlCrN, etc.)	radius	No torsion	-

  From: ₹ 6,042.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2.5	0.1	0.7 ～ 3.7	2	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6	1.5 ～ 5	Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,970.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

  OSG

  Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 5	0.3 ～ 1	2 ～ 10	3	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6	4 ～ 15	Plunging (Z feed)	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 18,126.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0 ～ 16	0.2 ～ 2	16 ～ 48	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 16	-	Plunging (Z feed)	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	3	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: ₹ 4,093.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 2	5 ～ 26	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	18 ～ 70	Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	5 ～ 56	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Radius End Mill

  MISUMI

  [Features]
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 30	2	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plunging (Z feed)	-	radius	-	-

  From: ₹ 2,749.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

  MISUMI

  [Features]
  ·Suppresses chattering with unequal lead and unequal flutes
  ·Stable machining is possible while maintaining finished surface accuracy
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can process heat-treated steel up to 50HRC
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1.5 ～ 12	0.2 ～ 3	4 ～ 30	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 12	-	Plunging (Z feed)	-	radius	-	-

  From: ₹ 2,749.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill, Radius 2DLCM-R

  NACHI(FUJIKOSHI)

  End mill for aluminum and copper alloys. Capable of rounding corners of grooves.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.2 ～ 3	6 ～ 38	2	40 ～ 100	Aluminum[◎] / Copper[○]	4 ～ 20	-	Plunging (Z feed)	DLC	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: ₹ 4,910.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Short with Corner Radius

  OSG

  2-Flute Short Corner Radius CBN-CR-EDS
  ·Demonstrates high performance in machining high-rigid materials

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	0.2 ～ 2	3 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	6	-	Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: ₹ 28,501.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 26	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	4 ～ 12	-	Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,324.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 3	20 ～ 56	2	90 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 20	-	Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 11,987.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys

  OSG

  End mill for aluminum alloy based on the concept of ultra-high speed machining. Ideal for high-efficiency processing of large aluminum parts for aircrafts, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	1 ～ 3	14 ～ 27	2	90 ～ 110	Aluminum[◎]	12 ～ 25	40 ～ 56	Plunging (Z feed)	DLC	radius	Weak torsion (15 to 25˚)	-

  From: ₹ 17,774.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills 3 Flutes for Aluminum Alloys

  OSG

  Strain generation is suppressed by the R of the shank side flange.
  Work Material Aluminum/Copper
  Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Corner/Ball radius (mm) 1
  Number of flutes (pcs.) 3

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  18 ～ 22	1	18 ～ 22	3	51 ～ 60	Aluminum[◎] / Copper[◎]	10 ～ 12	-	Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: ₹ 23,092.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	3	50 ～ 105	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 20	-	Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 6,629.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius

  OSG

  Adopts an ultra-heat-resistant and ultra-hard WXS coating

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	1.5 ～ 3	12 ～ 40	3	80 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6 ～ 20	-	Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 13,526.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

  OSG

  High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 20	-	Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 8,331.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated 2Flutes Long Shank

  OSG

  Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 11	0.3 ～ 1	10 ～ 22	2	100 ～ 180	Graphite[◎]	4 ～ 10	-	Plunging (Z feed)	Dia Coat	radius	Standard torsion (30-40°)	-

  From: ₹ 24,552.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2	0.5	0.8	3	60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	6	5	Plunging (Z feed)	TiAlN	radius	No torsion	-

  From: ₹ 5,881.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

  OSG

  Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[○] / Resin[◎]	6 ～ 20	-	Plunging (Z feed)	DLC	radius	Standard torsion (30-40°)	-

  From: ₹ 8,833.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
  · Available with an extensive lineup of corner radii

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	0.3 ～ 2	10 ～ 15	2	45 ～ 50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	6	-	Plunging (Z feed)	TiCN	radius	-	-

  From: ₹ 4,613.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Radius

  OSG

  The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	0.05 ～ 0.5	0.3 ～ 1.8	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4 ～ 6	1.5 ～ 6	Plunging (Z feed)	-	radius	-	-

  From: ₹ 15,389.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating

  WATERMILLS

  [Features]
  ·Strong twist.
  ·Quieter and smoother cutting.
  ·Can be used for both roughing and finishing.
  ·The unique groove shape enables smooth chip shape and discharge.
  ·Center cut.
  ·It has a cylindrical second angle to prevent chattering.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.3 ～ 4	12 ～ 50	3	39 ～ 104	Aluminum[○] / Copper[○]	3 ～ 20	-	Plunging (Z feed)	Non-Coated	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,039.96
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	OSG	WATERMILLS
Product Series	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill	DLC Mill, Radius 2DLCM-R	CBN End Mills 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius	Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys	Carbide End Mills 3 Flutes for Aluminum Alloys	3 Flutes Short for Copper & Aluminum Alloys	Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius	Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys	Diamond Coated 2Flutes Long Shank	WX Super Radius End Mills	Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation	C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]	CBN End Mills 2 Flutes Radius	WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating
From				₹ 6,042.36	₹ 6,970.56	₹ 18,126.36		₹ 4,093.11				₹ 2,749.36	₹ 2,749.36	₹ 4,910.20	₹ 28,501.31	₹ 6,324.96	₹ 11,987.93	₹ 17,774.11	₹ 23,092.84	₹ 6,629.02	₹ 13,526.89	₹ 8,331.38	₹ 24,552.78	₹ 5,881.64	₹ 8,833.65	₹ 4,613.20	₹ 15,389.98	₹ 4,039.96
Days to Ship	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Specifications	XAL General Steel 4 Flutes	DLC Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)				XAL General Steel 3 Flutes	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)
Blade diameter (D)(φ)	10	2 ～ 12	2 ～ 12	10 ～ 20	0.5 ～ 2.5	1 ～ 5	0 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	1 ～ 12	1.5 ～ 12	2 ～ 20	3 ～ 6	1 ～ 12	6 ～ 20	12 ～ 25	18 ～ 22	3 ～ 20	6 ～ 20	3 ～ 20	5 ～ 11	2	3 ～ 20	3 ～ 6	0.5 ～ 3	3 ～ 20
R Size(mm)	0.3	0.2 ～ 1	0.2 ～ 1	0.5 ～ 1	0.1	0.3 ～ 1	0.2 ～ 2	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.1 ～ 3	0.2 ～ 3	0.2 ～ 3	0.2 ～ 2	0.1 ～ 3	0.5 ～ 3	1 ～ 3	1	0.2 ～ 3	1.5 ～ 3	0.5 ～ 3	0.3 ～ 1	0.5	0.5 ～ 3	0.3 ～ 2	0.05 ～ 0.5	0.3 ～ 4
Blade length (ℓ)(mm)	-	5 ～ 36	5 ～ 36	10 ～ 20	0.7 ～ 3.7	2 ～ 10	16 ～ 48	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	2.5 ～ 30	4 ～ 30	6 ～ 38	3 ～ 6	2.5 ～ 26	20 ～ 56	14 ～ 27	18 ～ 22	8 ～ 38	12 ～ 40	4.5 ～ 30	10 ～ 22	0.8	4.5 ～ 30	10 ～ 15	0.3 ～ 1.8	12 ～ 50
Number of flutes(sheet)	4	3	3	2	2	3	3	3	3	3	3	2	4	2	2	2	2	2	3	3	3	3	2	3	3	2	2	3
Overall Length (L)(mm)	90	40 ～ 80	40 ～ 80	32 ～ 58	50	60 ～ 70	60 ～ 110	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	50 ～ 130	50 ～ 150	40 ～ 100	45 ～ 50	40 ～ 110	90 ～ 160	90 ～ 110	51 ～ 60	50 ～ 105	80 ～ 150	50 ～ 125	100 ～ 180	60	50 ～ 125	45 ～ 50	45 ～ 50	39 ～ 104
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Graphite[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[○] / Copper[○]
Shank diameter (d)(mm)	10	4 ～ 12	4 ～ 12	6 ～ 12	6	6	6 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	4 ～ 20	6	4 ～ 12	6 ～ 20	12 ～ 25	10 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	4 ～ 10	6	6 ～ 20	6	4 ～ 6	3 ～ 20
Underneck length (ℓ1)(mm)	-	23 ～ 50	23 ～ 50	-	1.5 ～ 5	4 ～ 15	-	-	14 ～ 68	18 ～ 70	26 ～ 92	-	-	-	-	-	-	40 ～ 56	-	-	-	-	-	5	-	-	1.5 ～ 6	-
Machining Application	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)
Coating	-	DLC	Non-Coated	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	DLC	Non-Coated	TiAlN	TiAlN	DLC	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Dia Coat	TiAlN	DLC	TiCN	-	Non-Coated
Type	-	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	-	-	Powerful Torsion (45°-60°)
R Precision(μm)	10	±0.02	±0.01 ～ ±0.02	-	-	-	±0.02	±0.01	±0.01	±0.01	±0.01	-	-	-0.032～-0.059 ～ -0.014～-0.028	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...