• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

Carbide Radius End Mills(Page4)

An online store for carbide radius end mills. In MISUMI's e-catalog, by setting conditions for specifications/standards such as blade diameter, radius size, compatible work materials, blade length, machining applications such as flat surface / side surface /groove, and coating presence, you can easily find the desired tool. A varied lineup including multi-blades for high hardness steel machining, products for aluminum machining with DLC coating, blade length difference, etc. is available.
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  • 15 Day(s) or Less
  • 20 Day(s) or Less
Brand
Product Series
Days to Ship
Blade diameter (D)(φ)
R Size(mm)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Overall Length (L)(mm)
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Torsion Angle (θ)
R Precision(μm)

    SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

      SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

        DZ (TiAlN)-COAT Radius End Mill, DZ-SED-R Type

          Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type

            Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

              Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type

                Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (With Rounded Corners)

                  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

                    One Cut Super Radius End Mill DV-OCSRLN

                      One Cut Super Radius End Mill DV-OCSR

                        One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

                          Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367

                            Square End Mill, Regular, 2-Flute Corner R 3561

                              Square End Mill, Regular, 4-Flute Corner R 3562

                                Square End Mill, Regular, Strong Torsion Multi-Blade Corner (6/8-Flute) Corner R 3563

                                  Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722

                                    Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723

                                      Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                        Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363

                                          Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362

                                            Unequal Lead End Mill Regular 4-Flute Corner R RF100Ti 3498

                                              Groove / Shoulder Processing, Universal Type (Radius) 4PGRM

                                                High Chip Flow Performance, Compatible for Steel/Difficult-to-Cut Material Unequal Flute Spacing End Mill 4YERM (Radius)

                                                  High Chip Flow Performance, Compatible for Steel/Difficult-to-Cut Material Unequal Flute Spacing End Mill 5DERM (Radius)

                                                    CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

                                                      CoroMill Plura, Carbide Solid End Mill Radius

                                                        CBN 2-Flute Corner Radius End Mill SBRE-2

                                                          CBN 2-Flute Corner Radius End Mill SBREF-2

                                                            CBN 3-Flute Corner Radius End Mill SBRE-3

                                                              CBN 3-Flute Corner Radius End Mill SBREF-3

                                                                PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

                                                                  End Mill with 2 Carbide Flutes and Corner Radius KSER-2

                                                                    End Mill with 2 Carbide Flutes and Corner Radius KSR-2

                                                                      End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

                                                                        Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

                                                                          Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                                                            Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

                                                                              End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

                                                                                Steam Carbide Radius End Mill CT-STE4R (Z10)

                                                                                  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) (Slim Shank)

                                                                                    MCD Diamond Tip Radius 2 Flutes

                                                                                      TiAlN Coat, Carbide long neck radius end mill, 2 flutes

                                                                                        TiAlN Coat, Carbide long neck radius end mill, 4 flutes

                                                                                          PRC-2 Flute Carbide Radius End Mill

                                                                                            PRC-3 Flute Carbide Radius End Mill Wave

                                                                                            Brand

                                                                                            OKAZAKI SEIKO

                                                                                            OKAZAKI SEIKO

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            TAIYO-TOOL

                                                                                            DIJET

                                                                                            VAN HOORN

                                                                                            VAN HOORN

                                                                                            VAN HOORN

                                                                                            PROCHI

                                                                                            PROCHI

                                                                                            Product Series

                                                                                            SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

                                                                                            SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

                                                                                            DZ (TiAlN)-COAT Radius End Mill, DZ-SED-R Type

                                                                                            Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type

                                                                                            Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

                                                                                            Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type

                                                                                            Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (With Rounded Corners)

                                                                                            Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

                                                                                            One Cut Super Radius End Mill DV-OCSRLN

                                                                                            One Cut Super Radius End Mill DV-OCSR

                                                                                            One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

                                                                                            Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367

                                                                                            Square End Mill, Regular, 2-Flute Corner R 3561

                                                                                            Square End Mill, Regular, 4-Flute Corner R 3562

                                                                                            Square End Mill, Regular, Strong Torsion Multi-Blade Corner (6/8-Flute) Corner R 3563

                                                                                            Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722

                                                                                            Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723

                                                                                            Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                                                                            Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363

                                                                                            Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362

                                                                                            Unequal Lead End Mill Regular 4-Flute Corner R RF100Ti 3498

                                                                                            Groove / Shoulder Processing, Universal Type (Radius) 4PGRM

                                                                                            High Chip Flow Performance, Compatible for Steel/Difficult-to-Cut Material Unequal Flute Spacing End Mill 4YERM (Radius)

                                                                                            High Chip Flow Performance, Compatible for Steel/Difficult-to-Cut Material Unequal Flute Spacing End Mill 5DERM (Radius)

                                                                                            CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

                                                                                            CoroMill Plura, Carbide Solid End Mill Radius

                                                                                            CBN 2-Flute Corner Radius End Mill SBRE-2

                                                                                            CBN 2-Flute Corner Radius End Mill SBREF-2

                                                                                            CBN 3-Flute Corner Radius End Mill SBRE-3

                                                                                            CBN 3-Flute Corner Radius End Mill SBREF-3

                                                                                            PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

                                                                                            End Mill with 2 Carbide Flutes and Corner Radius KSER-2

                                                                                            End Mill with 2 Carbide Flutes and Corner Radius KSR-2

                                                                                            End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

                                                                                            Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

                                                                                            Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                                                                            Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

                                                                                            End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

                                                                                            Steam Carbide Radius End Mill CT-STE4R (Z10)

                                                                                            Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) (Slim Shank)

                                                                                            MCD Diamond Tip Radius 2 Flutes

                                                                                            TiAlN Coat, Carbide long neck radius end mill, 2 flutes

                                                                                            TiAlN Coat, Carbide long neck radius end mill, 4 flutes

                                                                                            PRC-2 Flute Carbide Radius End Mill

                                                                                            PRC-3 Flute Carbide Radius End Mill Wave

                                                                                            Days to Ship 9 Day(s) or more 6 Day(s) or more 7 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 8 Day(s) or more 8 Day(s) or more 6 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 6 Day(s) or more 8 Day(s) or more 6 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 5 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more 6 Day(s) or more Quote Quote
                                                                                            Blade diameter (D)(φ)4 ~ 124 ~ 123 ~ 206 ~ 226 ~ 206 ~ 226 ~ 163 ~ 204 ~ 162 ~ 203 ~ 206 ~ 206 ~ 206 ~ 206 ~ 206 ~ 126 ~ 123 ~ 166 ~ 166 ~ 166 ~ 253 ~ 204 ~ 254 ~ 252 ~ 1660.3 ~ 60.3 ~ 33 ~ 60.3 ~ 20.5 ~ 21 ~ 41 ~ 60.5 ~ 38 ~ 163 ~ 163 ~ 161 ~ 36 ~ 2510 ~ 223 ~ 120.1 ~ 30.2 ~ 21 ~ 126 ~ 20
                                                                                            R Size(mm)0.5 ~ 20.5 ~ 210.4 ~ 50.5 ~ 40.5 ~ 50.5 ~ 20.2 ~ 31 ~ 30.5 ~ 30.5 ~ 31 ~ 2.5-----0.5 ~ 20.5 ~ 11 ~ 2-0.25 ~ 20.2 ~ 0.30.25 ~ 0.750.2 ~ 3-------------1 ~ 40.3 ~ 30.3 ~ 10.03 ~ 0.30.03 ~ 0.20.2 ~ 31
                                                                                            work materialgeneral steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○]Aluminum[◎] / Copper[○]Aluminum[◎] / Copper[○]Aluminum[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]Aluminum[◎] / Copper[◎]-----Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Titanium[◎]Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]-general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC60[○]general steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]-general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]Aluminum[◎] / Copper[◎]Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]-general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]Aluminum[○] / Copper[○] / Graphite[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○]
                                                                                            Blade length (ℓ)(mm)8 ~ 248 ~ 2410 ~ 459 ~ 339 ~ 339 ~ 339 ~ 248 ~ 386 ~ 244 ~ 408 ~ 38----10 ~ 2213 ~ 26---13 ~ 454.5 ~ 3012 ~ 4512 ~ 452 ~ 16-0.3 ~ 20.3 ~ 21.5 ~ 20.5 ~ 1.50.5 ~ 1.51 ~ 403 ~ 131.5 ~ 1012 ~ 246 ~ 324.5 ~ 243 ~ 1015 ~ 5022 ~ 403 ~ 120.2 ~ 30.3 ~ 32 ~ 3018 ~ 45
                                                                                            Number of flutes(sheet)442332443343246 ~ 82446444452 ~ 442233222233344422423
                                                                                            TyperadiusradiusradiusradiusradiusradiusradiusradiusLong-Neck RadiusradiusradiusradiusradiusradiusradiusradiusradiusradiusLong-Neck RadiusLong-Neck Radiusradiusradiusradiusradiusradius / Long-Neck RadiusradiusradiusradiusHigh-Feed RadiusHigh-Feed Radiusradiusradiusradiusradius---radiusradiusradiusradiusLong-Neck RadiusLong-Neck Radiusradiusradius
                                                                                            Overall Length (L)(mm)70 ~ 11070 ~ 11045 ~ 11580 ~ 20060 ~ 12080 ~ 200120 ~ 18060 ~ 12580 ~ 18570 ~ 18560 ~ 12557 ~ 10457 ~ 10457 ~ 10457 ~ 10457 ~ 8357 ~ 8357 ~ 9275 ~ 15075 ~ 15057 ~ 12157 ~ 15055 ~ 12155 ~ 12157 ~ 1505750 ~ 6050 ~ 6050 ~ 70505050 ~ 8040 ~ 5060100 ~ 16060 ~ 10060 ~ 1206070 ~ 13080 ~ 13078646450 ~ 10060 ~ 100
                                                                                            Shank diameter (d)(mm)6 ~ 126 ~ 126 ~ 205.8 ~ 206 ~ 205.8 ~ 205.8 ~ 156 ~ 204 ~ 166 ~ 206 ~ 206 ~ 206 ~ 206 ~ 206 ~ 206 ~ 126 ~ 126 ~ 166 ~ 166 ~ 166 ~ 256 ~ 206 ~ 256 ~ 256 ~ 166646444 ~ 64 ~ 636 ~ 146 ~ 166 ~ 1636 ~ 258 ~ 206 ~ 124 ~ 664 ~ 126 ~ 20
                                                                                            Underneck length (ℓ1)(mm)15 ~ 4215 ~ 42------20 ~ 1206 ~ 1510 ~ 1521 ~ 44---21 ~ 3821 ~ 3821 ~ 4439 ~ 10539 ~ 10521 ~ 659 ~ 60--4 ~ 4239--------------9 ~ 300.2 ~ 302 ~ 10--
                                                                                            Machining ApplicationPlane / Side / GroovePlane / Side / GrooveSide / GrooveSide / GrooveSide / GrooveSideSideSide / GrooveSide / Curved surfaceSide / Curved surfaceSide / Curved surface----------Plane / Side / Curved surface / GroovePlane / Side / Curved surface / GroovePlane / Side / Curved surface / GrooveGroovePlane / Side / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined Cuts-Side / Groove-----
                                                                                            CoatingTiAlNFor High Hardness (Silicon Group)TiAlNNon-CoatedNon-CoatedNon-CoatedTiAlNTiAlN---Non-Coated---Dia CoatDia CoatOtherOtherOther-TiAlNTiAlNFor General Steels (AlCrN, etc.)AlTiN-Non-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiAlNDLCDLCDLCTiAlNNon-CoatedTiAlN-TiAlNTiAlNTiAlNTiAlN
                                                                                            Torsion Angle (θ)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)OtherPowerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)No torsionStandard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)---Standard torsion (30-40°)Standard torsion (30-40°)
                                                                                            R Precision(μm)---0.025~-0.0250.025~-0.0250.025~-0.025--0.015~-0.0150.015~-0.0150.02~-0.02---------------------------0~-0.05----0~-200~-30 ~ 0~-20

                                                                                            Loading...

                                                                                            Related Categories to Carbide Radius End Mills