Carbide Radius End Mills（work material：High Hardness Steel-HRC55 Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Long Tough Radius

  OSG

  4-flute radius end mill long neck type suitable for rib machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.8 ～ 3	0.1 ～ 0.5	0.32 ～ 1.2	4	50	High Hardness Steel-HRC55[◎]	4	2 ～ 16.65	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	0～-0.01

  From: ₹ 5,222.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2Flutes Long Neck Radius

  OSG

  The CBN construction enables high-efficiency and high-precision machining, and fewer tool changes make continuous machining possible, leading to cost reductions.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	0.05 ～ 0.5	0.3 ～ 1.8	2	45 ～ 50	High Hardness Steel-HRC55[◎]	4 ～ 6	2.5 ～ 12	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	Standard torsion (30-40°)	±0.005

  From: ₹ 17,550.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

  GUHRING

  [Features]
  · Capable of machining hardened materials of hardness exceeding 60 HRC.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	0.5 ～ 2	-	4	57 ～ 92	High Hardness Steel-HRC55[◎]	6 ～ 16	21 ～ 44	-	Other	radius	Standard torsion (30-40°)	-

  From: ₹ 5,833.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363

  GUHRING

  [Features]
  · Capable of machining hardened materials of hardness exceeding 60 HRC.
  · Features short flutes and rounded corners with high rigidity, enabling high precision machining in deep areas.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 16	0.5 ～ 1	-	6	75 ～ 150	High Hardness Steel-HRC55[◎]	6 ～ 16	39 ～ 105	-	Other	Long-Neck Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 5,833.04
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X

  7 LEADERS

  [Features]
  · Also use the 2-flute short radius end mill to prevent tip chipping.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 4	3 ～ 38	2	50 ～ 100	High Hardness Steel-HRC55[◎]	4 ～ 20	-	Plane / Side / Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872

  GUHRING

  [Features]
  · A versatile unequal lead type which supports a wide range of materials from raw materials to hardened materials.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.5 ～ 3	13 ～ 45	4	57 ～ 121	High Hardness Steel-HRC55[○]	6 ～ 25	21 ～ 65	-	Other	radius	Standard torsion (30-40°)	-

  From: ₹ 54,849.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

  MISUMI

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	50 ～ 100	High Hardness Steel-HRC55[◎]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 8,543.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 20	0.813 ～ 2.607	8 ～ 40	4	50 ～ 150	High Hardness Steel-HRC55[◎]	6 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 6,160.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	80 ～ 160	High Hardness Steel-HRC55[◎]	6 ～ 12	35 ～ 108	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,968.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

  MISUMI

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	High Hardness Steel-HRC55[○]	6	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.005

  From: ₹ 3,161.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0 ～ 16	0.2 ～ 2	16 ～ 48	3	60 ～ 110	High Hardness Steel-HRC55[○]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	18 ～ 38	4	60 ～ 100	High Hardness Steel-HRC55[○]	6 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  From: ₹ 2,176.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	3	50 ～ 100	High Hardness Steel-HRC55[◎]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,976.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]
  ·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
  ·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
  ·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.75 ～ 3	1.2 ～ 5	4	60 ～ 110	High Hardness Steel-HRC55[◎]	6 ～ 12	7.5 ～ 24	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	No torsion	±0.02

  From: ₹ 3,449.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	4	50 ～ 100	High Hardness Steel-HRC55[◎]	4 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 3,064.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	3	40 ～ 65	High Hardness Steel-HRC55[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: ₹ 4,093.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	4	40 ～ 65	High Hardness Steel-HRC55[○]	6 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: ₹ 4,397.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	3	60 ～ 100	High Hardness Steel-HRC55[○]	6 ～ 12	14 ～ 68	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 2	5 ～ 26	3	60 ～ 100	High Hardness Steel-HRC55[○]	6 ～ 12	18 ～ 70	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	5 ～ 56	3	60 ～ 130	High Hardness Steel-HRC55[○]	6 ～ 20	26 ～ 92	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	4	60 ～ 100	High Hardness Steel-HRC55[○]	6 ～ 12	14 ～ 68	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute stub model

  MISUMI

  [Features]
  ·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 3	3 ～ 18	2	35 ～ 60	High Hardness Steel-HRC55[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01

  From: ₹ 2,306.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	1.5 ～ 18	2	40 ～ 75	High Hardness Steel-HRC55[○]	4 ～ 12	14 ～ 45	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 1	3 ～ 18	4	35 ～ 60	High Hardness Steel-HRC55[○]	4 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 2,464.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / short model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2 ～ 24	4	40 ～ 75	High Hardness Steel-HRC55[○]	4 ～ 12	17 ～ 45	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck radius end mill, 4-flute / long neck model

  MISUMI

  [Features]
  ·Radius (R) accuracy of ±5 µm (compared to the manufacturer measurements) enables high precision deep cavity milling
  ·By adopting 4-flute shape, it is possible to process at high feed setting compared to 2-flute
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 5	0.5	8 ～ 12	4	45	High Hardness Steel-HRC55[○]	6	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Standard torsion (30-40°)	±0.01

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

  MISUMI

  The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	High Hardness Steel-HRC55[◎]	6	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.005

  From: ₹ 5,324.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

  MISUMI

  [Features]
  ·High helix angle end mill with radius for machining high hardness steel
  ·High tool rigidity minimizes tool tilt during side milling
  ·Machining of high hardness steel up to 65HRC is possible
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 2	5 ～ 12	6	60 ～ 85	High Hardness Steel-HRC55[◎]	6 ～ 12	11 ～ 55	Plane / Side / Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  MISUMI

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.2 ～ 3	4 ～ 45	4	50 ～ 110	High Hardness Steel-HRC55[○]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  From: ₹ 1,568.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Radius End Mill

  MISUMI

  [Features]
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 30	2	50 ～ 130	High Hardness Steel-HRC55[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  From: ₹ 2,749.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Long Neck Radius End Mill

  MISUMI

  [Features]
  ·Effective for deep cutting due to long neck type
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.4 ～ 12	0.1 ～ 1	0.6 ～ 18	2	40 ～ 100	High Hardness Steel-HRC55[○]	4 ～ 12	2 ～ 50	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	Long-Neck Radius	-	-

  From: ₹ 2,168.07
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

  MISUMI

  [Features]
  ·Effective for deep cutting due to long neck type
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.2 ～ 1	1.5 ～ 30	4	50 ～ 110	High Hardness Steel-HRC55[○]	4 ～ 12	4 ～ 50	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	Long-Neck Radius	-	-

  From: ₹ 2,312.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Radius GSH-R

  NACHI(FUJIKOSHI)

  Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.2 ～ 2	13 ～ 38	6 ～ 8	50 ～ 100	High Hardness Steel-HRC55[◎]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 8,349.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4GEOLS-R

  NACHI(FUJIKOSHI)

  Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	4.5 ～ 30	4	60 ～ 200	High Hardness Steel-HRC55[◎]	6 ～ 20	12 ～ -	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: ₹ 8,195.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4XSGEO-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	50 ～ 125	High Hardness Steel-HRC55[◎]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: ₹ 6,922.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Short with Corner Radius

  OSG

  2-Flute Short Corner Radius CBN-CR-EDS
  ·Demonstrates high performance in machining high-rigid materials

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	0.2 ～ 2	3 ～ 6	2	45 ～ 50	High Hardness Steel-HRC55[◎]	6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: ₹ 28,501.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2.5	0.1	0.7 ～ 3.7	2	50	High Hardness Steel-HRC55[○]	6	1.5 ～ 5	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,970.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 26	2	40 ～ 110	High Hardness Steel-HRC55[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,324.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 3	20 ～ 56	2	90 ～ 160	High Hardness Steel-HRC55[○]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 11,987.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius

  OSG

  Adopts an ultra-heat-resistant and ultra-hard WXS coating

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	1.5 ～ 3	12 ～ 40	3	80 ～ 150	High Hardness Steel-HRC55[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 13,526.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.2	13 ～ 26	4	90 ～ 110	High Hardness Steel-HRC55[○]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 17,574.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  16 ～ 20	0.5 ～ 3	48 ～ 56	4	140 ～ 160	High Hardness Steel-HRC55[○]	16 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 65,721.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 13	0.5 ～ 3	0.8 ～ 5.5	3 ～ 4	60 ～ 110	High Hardness Steel-HRC55[◎]	6 ～ 12	5 ～ 24	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	No torsion	-

  From: ₹ 5,881.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 30	4	60 ～ 160	High Hardness Steel-HRC55[◎]	6 ～ 20	9 ～ 60	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 8,449.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6	0.3	13	4	60	High Hardness Steel-HRC55[○]	6	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 12,649.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	GUHRING	GUHRING	7 LEADERS	GUHRING	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Micro Grain Carbide End Mills PHOENIX Long Tough Radius	CBN End Mills 2Flutes Long Neck Radius	Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361	Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363	Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X	All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	(Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide long neck radius end mill, 4-flute / long neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	(Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 2-Flute Long Neck Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill	GS MILL Hard Radius GSH-R	X's Mill Geo Radius 4GEOLS-R	X's Mill Geo Radius 4XSGEO-R	CBN End Mills 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius	Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius	WX Super Radius End Mills	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)
From	₹ 5,222.65	₹ 17,550.44	₹ 5,833.04	₹ 5,833.04	₹ 2,426.95	₹ 54,849.49	₹ 8,543.31	₹ 6,160.53	₹ 4,968.22	₹ 3,161.31		₹ 2,176.00	₹ 4,976.00	₹ 3,449.82	₹ 3,064.13	₹ 4,093.11	₹ 4,397.96					₹ 2,306.27		₹ 2,464.00			₹ 5,324.73		₹ 1,568.00	₹ 2,749.36	₹ 2,168.07	₹ 2,312.00	₹ 8,349.33	₹ 8,195.84	₹ 6,922.87	₹ 28,501.31	₹ 6,970.56	₹ 6,324.96	₹ 11,987.93	₹ 13,526.89	₹ 17,574.55	₹ 65,721.73	₹ 5,881.64	₹ 8,449.25	₹ 12,649.58
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications
Blade diameter (D)(φ)	0.8 ～ 3	0.5 ～ 3	3 ～ 16	6 ～ 16	1 ～ 20	6 ～ 25	4 ～ 12	4 ～ 20	4 ～ 12	2 ～ 6	0 ～ 16	4 ～ 12	2 ～ 12	3 ～ 12	2 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 12	2 ～ 12	1 ～ 12	2 ～ 12	1 ～ 12	4 ～ 5	2 ～ 6	6 ～ 12	2 ～ 20	1 ～ 12	0.4 ～ 12	1 ～ 12	6 ～ 20	3 ～ 20	3 ～ 20	3 ～ 6	0.5 ～ 2.5	1 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	16 ～ 20	2 ～ 13	3 ～ 20	6
R Size(mm)	0.1 ～ 0.5	0.05 ～ 0.5	0.5 ～ 2	0.5 ～ 1	0.1 ～ 4	0.5 ～ 3	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.2 ～ 0.5	0.2 ～ 2	0.2 ～ 2	0.5 ～ 2	0.75 ～ 3	0.5 ～ 2	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.5	0.2 ～ 0.5	0.5 ～ 2	0.2 ～ 3	0.1 ～ 3	0.1 ～ 1	0.2 ～ 1	0.2 ～ 2	0.2 ～ 2	0.2 ～ 3	0.2 ～ 2	0.1	0.1 ～ 3	0.5 ～ 3	1.5 ～ 3	0.2	0.5 ～ 3	0.5 ～ 3	0.2 ～ 3	0.3
Blade length (ℓ)(mm)	0.32 ～ 1.2	0.3 ～ 1.8	-	-	3 ～ 38	13 ～ 45	8 ～ 24	8 ～ 40	8 ～ 24	3 ～ 9	16 ～ 48	18 ～ 38	2 ～ 12	1.2 ～ 5	2 ～ 12	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 18	3 ～ 18	1.5 ～ 18	3 ～ 18	2 ～ 24	8 ～ 12	3 ～ 9	5 ～ 12	4 ～ 45	2.5 ～ 30	0.6 ～ 18	1.5 ～ 30	13 ～ 38	4.5 ～ 30	8 ～ 38	3 ～ 6	0.7 ～ 3.7	2.5 ～ 26	20 ～ 56	12 ～ 40	13 ～ 26	48 ～ 56	0.8 ～ 5.5	5 ～ 30	13
Number of flutes(sheet)	4	2	4	6	2	4	3	4	3	4	3	4	3	4	4	3	4	3	3	3	4	2	2	4	4	4	4	6	4	2	2	4	6 ～ 8	4	4	2	2	2	2	3	4	4	3 ～ 4	4	4
Overall Length (L)(mm)	50	45 ～ 50	57 ～ 92	75 ～ 150	50 ～ 100	57 ～ 121	50 ～ 100	50 ～ 150	80 ～ 160	50	60 ～ 110	60 ～ 100	50 ～ 100	60 ～ 110	50 ～ 100	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	60 ～ 100	35 ～ 60	40 ～ 75	35 ～ 60	40 ～ 75	45	50	60 ～ 85	50 ～ 110	50 ～ 130	40 ～ 100	50 ～ 110	50 ～ 100	60 ～ 200	50 ～ 125	45 ～ 50	50	40 ～ 110	90 ～ 160	80 ～ 150	90 ～ 110	140 ～ 160	60 ～ 110	60 ～ 160	60
work material	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]
Shank diameter (d)(mm)	4	4 ～ 6	6 ～ 16	6 ～ 16	4 ～ 20	6 ～ 25	6 ～ 12	6 ～ 20	6 ～ 12	6	6 ～ 16	6 ～ 12	4 ～ 12	6 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6	6	6 ～ 12	4 ～ 20	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6	6	4 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	16 ～ 20	6 ～ 12	6 ～ 20	6
Underneck length (ℓ1)(mm)	2 ～ 16.65	2.5 ～ 12	21 ～ 44	39 ～ 105	-	21 ～ 65	-	-	35 ～ 108	-	-	-	-	7.5 ～ 24	-	-	-	14 ～ 68	18 ～ 70	26 ～ 92	14 ～ 68	-	14 ～ 45	-	17 ～ 45	-	-	11 ～ 55	-	-	2 ～ 50	4 ～ 50	-	12 ～ -	-	-	1.5 ～ 5	-	-	-	-	-	5 ～ 24	9 ～ 60	-
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Plane / Side / Curved surface	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface
Coating	For High Hardness (Silicon Group)	-	Other	Other	-	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	-	-	-	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
Type	radius	radius	radius	Long-Neck Radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	High-Feed Radius	radius	radius	radius	Long-Neck Radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	-	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	0～-0.01	±0.005	-	-	0～-20	-	-	-	-	±0.005	±0.02	±0.02	±0.015	±0.02	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01	±0.005	±0.02	±0.02	-	-	-	-	-0.032～-0.059 ～ -0.014～-0.028	-0.032～-0.059 ～ -0.014～-0.028	-	-	-	-	-	-	-	-	-	-

Loading...