Carbide Radius End Mills（Machining Application：Inclined Cuts）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	18 ～ 38	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 12	-	Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02 ～ 10

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / regular model

  MISUMI

  [Features]
  ·General purpose 2-flute end mill with regular flute length type with cutting edge radius
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	3 ～ 60	2	45 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	23 ～ 55	Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 56	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

  MISUMI

  Small radius type that prevents cutter marks on resin

  • Non-Coated
  • Resin
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 10	0.2	3 ～ 30	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	3 ～ 10	-	Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 2,434.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	2 ～ 40	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	17 ～ 45	Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 3	8 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 1,736.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	4	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 20	-	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,792.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	4	70 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 16	28 ～ 120	Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 5,120.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	5 ～ 56	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

  MISUMI

  Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	2	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 12	23 ～ 50	Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

  MISUMI

  The diamond coated radius shape that's ideal for shaping graphite

  • DIA
  • Graphite
  • 4 Flutes
  • Long

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 3	30 ～ 60	4	150 ～ 200	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	6 ～ 12	60 ～ 85	Inclined Cuts	Dia Coat	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 15,280.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
  ·Long neck type is ideal for deep cavity milling of deep pockets, etc.
  ·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	1 ～ 2	8 ～ 24	3	70 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	28 ～ 90	Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,818.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  MISUMI

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.2 ～ 3	4 ～ 45	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  From: ₹ 1,568.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSR-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	-	3 ～ 13	2	40 ～ 50	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 5,116.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

  KYOWA SEIKO

  [Specifications]
  · Shape: Radius End Mill (carbide)
  · Material: Super Micro Grain Alloy
  · Work Materials: Aluminum [◎], Copper [◎]
  [Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	-	4.5 ～ 24	3	60 ～ 120	Aluminum[◎] / Copper[◎]	6 ～ 16	-	Inclined Cuts	DLC	-	Powerful Torsion (45°-60°)	-

  From: ₹ 6,524.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T 4 Flute Anti-Vibration Radius

  Poulten&Graf

  [Features]
  · Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.
  · Total length of 100 mm and inexpensive so that it's easy to use.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6	2	15	4	100	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	6	-	Inclined Cuts	AlTiN	Long-Neck Radius	Standard torsion (30-40°)	±0.01

  From: ₹ 3,565.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 30	2	50 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 12	-	Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 1,336.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / regular model

  MISUMI

  [Features]
  ·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 36	4	45 ～ 85	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	23 ～ 55	Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

  MISUMI

  [Features]
  ·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 3	0.05 ～ 0.5	0.16 ～ 6	2	40 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 6	1 ～ 60	Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Standard torsion (30-40°)	±0.005 ～ ±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

  MISUMI

  By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.8 ～ 2	4.5 ～ 18	3	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 16	24 ～ 105	Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Powerful Torsion (45°-60°)	±0.02

  From: ₹ 4,614.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Radius End Mill

  MISUMI

  [Features]
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 30	2	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Inclined Cuts	-	radius	-	-

  From: ₹ 2,749.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

  MISUMI

  [Features]
  ·Effective for deep cutting due to long neck type
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.2 ～ 1	1.5 ～ 30	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	4 ～ 50	Inclined Cuts	-	Long-Neck Radius	-	-

  From: ₹ 2,312.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank

  SANKO MFG

  [Features]
  · Suitable for corner rounding or cutting curved surfaces.
  · A long shank type which allows for machining in deep sections.
  · Finished surfaces can be improved and high-efficiency machining is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	4	120 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 25	-	Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: ₹ 11,665.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank

  SANKO MFG

  Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.
  
  [Features]
  · A long shank type which allows for machining in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	2	120 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 25	-	Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: ₹ 10,207.87
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

  KYOWA SEIKO

  [Specifications]
  · Shape: Radius End Mill (carbide)
  · Material: PCD Polycrystalline Diamond
  · Work materials: For carbide alloy machining
  [Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2	-	0.5 ～ 1.5	2	50	-	4	-	Inclined Cuts	Non-Coated	radius	No torsion	-

  From: ₹ 66,680.36
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSER-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 4	-	1 ～ 40	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 5,680.35
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

  MISUMI

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	-	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 8,543.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 20	0.813 ～ 2.607	8 ～ 40	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 20	-	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 6,160.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,968.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	4	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 5,153.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

  MISUMI

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6	-	Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.005

  From: ₹ 3,161.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0 ～ 16	0.2 ～ 2	16 ～ 48	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 16	-	Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,976.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	4 ～ 24	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,560.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]
  ·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
  ·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
  ·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  • TS
  • High-Hardness Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.75 ～ 3	1.2 ～ 5	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	7.5 ～ 24	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	No torsion	±0.02

  From: ₹ 3,449.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 3,064.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	3	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: ₹ 4,093.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	4	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: ₹ 4,397.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 2	5 ～ 26	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	18 ～ 70	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
  ·Long shank type ideal for deep cavity milling
  ·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 22	0.2 ～ 2	4.5 ～ 30	4	80 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	10 ～ 18	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: ₹ 5,759.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Multi-function end mill radius type.
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 38	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	18 ～ 73	Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute stub model

  MISUMI

  [Features]
  ·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 3	3 ～ 18	2	35 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01

  From: ₹ 2,306.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	1.5 ～ 18	2	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	14 ～ 45	Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	KYOWA SEIKO	KYOWA SEIKO	Poulten&Graf	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	SANKO MFG	SANKO MFG	KYOWA SEIKO	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	TSC series carbide radius end mill, 2-flute / regular model	TSC series carbide radius end mill, 4-flute, 45°, regular model	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	TSC series carbide radius end mill, 2-flute / short model	(Economy series) XAL series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	End Mill with 2 Carbide Flutes and Corner Radius KSR-2	Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC	SPEED/T 4 Flute Anti-Vibration Radius	(Economy series) XAL series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill	SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank	SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank	PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2	End Mill with 2 Carbide Flutes and Corner Radius KSER-2	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
From				₹ 2,434.20		₹ 1,736.00	₹ 4,792.00	₹ 5,120.00			₹ 15,280.00	₹ 4,818.16	₹ 1,568.00	₹ 5,116.45	₹ 6,524.16	₹ 3,565.44	₹ 1,336.00			₹ 4,614.55	₹ 2,749.36	₹ 2,312.00	₹ 11,665.13	₹ 10,207.87	₹ 66,680.36	₹ 5,680.35	₹ 8,543.31	₹ 6,160.53	₹ 4,968.22	₹ 5,153.05	₹ 3,161.31		₹ 4,976.00	₹ 4,560.00	₹ 3,449.82	₹ 3,064.13	₹ 4,093.11	₹ 4,397.96			₹ 5,759.51			₹ 2,306.27
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications	XAL General Steel 4 Flutes	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes R (Regular)	Non-Coated Resin 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	XAL General Steel 4 Flutes	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes R (Regular)	DIA Graphite 4 Flutes Long	TS High-Hardness Steel 3 Flutes					XAL General Steel 2 Flutes	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)							TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	XAL General Steel 3 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes	TS High-Hardness Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)
Blade diameter (D)(φ)	4 ～ 12	1 ～ 20	3 ～ 20	1 ～ 10	1 ～ 20	3 ～ 20	2 ～ 20	4 ～ 16	3 ～ 20	2 ～ 12	6 ～ 12	4 ～ 12	2 ～ 20	1 ～ 6	3 ～ 16	6	1 ～ 12	1 ～ 12	0.2 ～ 3	3 ～ 12	1 ～ 12	1 ～ 12	6 ～ 25	6 ～ 25	0.5 ～ 2	1 ～ 4	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	2 ～ 6	0 ～ 16	2 ～ 12	2 ～ 12	3 ～ 12	2 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 22	3 ～ 12	3 ～ 20	2 ～ 12	1 ～ 12
R Size(mm)	0.2 ～ 2	0.1 ～ 3	0.2 ～ 3	0.2	0.1 ～ 3	0.1 ～ 3	0.5 ～ 3	1 ～ 3	0.2 ～ 2	0.2 ～ 1	0.5 ～ 3	1 ～ 2	0.2 ～ 3	-	-	2	0.1 ～ 3	0.1 ～ 3	0.05 ～ 0.5	0.8 ～ 2	0.1 ～ 3	0.2 ～ 1	0.3 ～ 8	0.3 ～ 8	-	-	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.813 ～ 2.438	0.2 ～ 0.5	0.2 ～ 2	0.5 ～ 2	0.5 ～ 2	0.75 ～ 3	0.5 ～ 2	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.1 ～ 3
Blade length (ℓ)(mm)	18 ～ 38	3 ～ 60	5 ～ 56	3 ～ 30	2 ～ 40	8 ～ 38	4 ～ 40	6 ～ 24	5 ～ 56	5 ～ 36	30 ～ 60	8 ～ 24	4 ～ 45	3 ～ 13	4.5 ～ 24	15	3 ～ 30	3 ～ 36	0.16 ～ 6	4.5 ～ 18	2.5 ～ 30	1.5 ～ 30	20 ～ 75	20 ～ 75	0.5 ～ 1.5	1 ～ 40	8 ～ 24	8 ～ 40	8 ～ 24	8 ～ 24	3 ～ 9	16 ～ 48	2 ～ 12	4 ～ 24	1.2 ～ 5	2 ～ 12	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	4.5 ～ 30	4.5 ～ 18	5 ～ 38	3 ～ 18	1.5 ～ 18
Number of flutes(sheet)	4	2	4	2	2	4	4	4	3	2	4	3	4	2	3	4	2	4	2	3	2	4	4	2	2	2	3	4	3	4	4	3	3	3	4	4	3	4	3	3	4	4	4	2	2
Overall Length (L)(mm)	60 ～ 100	45 ～ 125	60 ～ 130	50 ～ 80	40 ～ 110	50 ～ 100	50 ～ 130	70 ～ 180	60 ～ 130	40 ～ 80	150 ～ 200	70 ～ 140	50 ～ 110	40 ～ 50	60 ～ 120	100	50 ～ 75	45 ～ 85	40 ～ 100	80 ～ 160	50 ～ 130	50 ～ 110	120 ～ 230	120 ～ 230	50	50 ～ 80	50 ～ 100	50 ～ 150	80 ～ 160	80 ～ 160	50	60 ～ 110	50 ～ 100	50 ～ 100	60 ～ 110	50 ～ 100	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	80 ～ 200	60 ～ 100	60 ～ 110	35 ～ 60	40 ～ 75
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Aluminum[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Shank diameter (d)(mm)	6 ～ 12	4 ～ 20	6 ～ 20	3 ～ 10	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 16	6 ～ 20	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 20	4 ～ 6	6 ～ 16	6	4 ～ 12	4 ～ 12	4 ～ 6	6 ～ 16	6 ～ 12	4 ～ 12	6 ～ 25	6 ～ 25	4	4 ～ 6	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	6	6 ～ 16	4 ～ 12	4 ～ 12	6 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 20	4 ～ 12	4 ～ 12
Underneck length (ℓ1)(mm)	-	23 ～ 55	26 ～ 92	-	17 ～ 45	-	-	28 ～ 120	26 ～ 92	23 ～ 50	60 ～ 85	28 ～ 90	-	-	-	-	-	23 ～ 55	1 ～ 60	24 ～ 105	-	4 ～ 50	-	-	-	-	-	-	35 ～ 108	35 ～ 108	-	-	-	-	7.5 ～ 24	-	-	-	14 ～ 68	18 ～ 70	10 ～ 18	14 ～ 68	18 ～ 73	-	14 ～ 45
Machining Application	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts
Coating	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Dia Coat	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	Non-Coated	DLC	AlTiN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	TiAlN	TiAlN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Type	radius	radius	radius	radius	radius	radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	Long-Neck Radius	radius	radius	-	Long-Neck Radius	radius	radius	Tapered neck radius	Tapered neck radius	radius	Long-Neck Radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	-	-	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)
R Precision(μm)	±0.02 ～ 10	±0.01 ～ ±0.02	±0.01	±0.02	±0.01 ～ ±0.02	±0.02	±0.015	±0.015	±0.01	±0.01 ～ ±0.02	±0.02	±0.015	±0.02	-	-	±0.01	±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.02	-	-	0～+0.04	0～+0.04	-	-	-	-	-	-	±0.005	±0.02	±0.015	±0.015	±0.02	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02

Loading...