Ball End Mills (Carbide)（Machining Application：Curved surface）

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]
  · High-accuracy ball end mill coated with WXL hard lubricating film coating.
  Proven performance on a wide range of work materials.
  Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.007 to 0.003 ～ ±0.01	Curved surface	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,011.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

  MISUMI

  4-flute ball for graphite that achieves high feed

  • DIA
  • Graphite
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	4 ～ 24	-	6 ～ 12	4	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface	Dia Coat	Ball

  From: ₹ 6,439.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]
  ·General purpose 2-blade ball end mill for wide range of profiling
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	TiAlN	Ball

  From: ₹ 1,260.11
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
  · Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	±5 ～ ±10	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,320.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Long shank type, ideal for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	TiAlN	Ball

  From: ₹ 3,008.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Ball End Mill CSBE

  EIKOSHA

  [Features]
  · 2-flute carbide solid ball end mill.
  · For shape machining.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 20	3 ～ 70	-	4 ～ 32	2	45 ～ 180	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	±0.02	Curved surface	-	Ball

  From: ₹ 7,570.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	±0.005	Curved surface	Non-Coated	Ball

  From: ₹ 10,797.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball-End Type, GX-EQD-SF

  OSG

  Ball end mill with spherical cutting edge developed for shrink fitting.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  10	15	-	12	2	58	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-0.01～+0.01	Curved surface	For General Steels (AlCrN, etc.)	Spherical Ball

  From: ₹ 25,989.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

  NS TOOL

  World's smallest ball end mill "Micro Ball" extends the microfabrication area

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.005 ～ 0.05	0.01 ～ 0.1	-	4	1	45	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.002～-0.002	Curved surface	Non-Coated	Ball

  From: ₹ 5,912.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Blade Sander Ball

  WIDIN

  [Features]
  · Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.75 ～ R10	4 ～ 38	-	3 ～ 20	2	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	±0.01	Curved surface	TiAlN	Ball

  From: ₹ 2,552.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

  MISUMI

  Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity

  • CrN
  • Copper
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Aluminum[○] / Copper[◎] / Resin[○]	±0.01	Curved surface	CrN	Ball

  From: ₹ 2,252.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

  MISUMI

  Diamond coated products that exert tremendous durability are available in the industry's lowest price

  • DIA
  • Graphite
  • 2 Flutes
  • L (Long)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	3 ～ 55	20 ～ 65	4 ～ 12	2	50 ～ 200	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface	Dia Coat	Ball

  From: ₹ 5,727.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type

  EIKOSHA

  Carbide ball end mill 2-flute standard type suitable for graphite electrode machining.
  [Features]
  ·In addition to graphite electrodes, aluminum can also be cut.
  [Applications]
  ·End mill for graphite electrode machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	8 ～ 60	-	4 ～ 25	2	60 ～ 180	Aluminum[◎] / Copper[◎] / Graphite[◎]	±0.02	Curved surface	-	Ball

  From: ₹ 7,327.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 2-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	±0.01	Curved surface	Non-Coated	Ball

  From: ₹ 5,054.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura Carbide Ball End Mill, Diamond Coated, 2B230

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	3 ～ 22	-	3 ～ 12	2	38 ～ 83	High Hardness Steel-HRC65[○] / Graphite[○] / Resin[○]	-	Curved surface	Other	Ball

  From: ₹ 17,298.62
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]
  ·Regular bridge length allows for many regrinding times
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Mold Finish Master BNBP

  NACHI(FUJIKOSHI)

  ·CBN ball end mill.
  ·Suitable for high-speed finishing of high-hardness material dies.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1	0.3 ～ 1.4	1.2 ～ 5.5	4 ～ 6	2	50	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	Curved surface	-	Ball

  From: ₹ 28,086.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-SXB

  OSG

  Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	1.2 ～ 6	4 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.005～+0.005	Curved surface	Non-Coated	Ball

  From: ₹ 19,114.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-HS-EBD

  OSG

  WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.4 ～ 18	-	4 ～ 12	2	35 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.007～+0.003 ～ -0.005～+0.005	Curved surface	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 1,496.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute DIA-PC-EBD

  OSG

  Pencil neck ball supports ultra-deep milling of graphite electrodes. Ultra-microcrystalline diamond coating realizes dramatic extension of tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	2.5 ～ 12	30 ～ 150	6 ～ 12	3	100 ～ 220	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	-	Curved surface	Dia Coat	Ball

  From: ₹ 35,113.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-PC-EBD

  OSG

  [Features]
  · WXL coating with excellent lubrication and wear resistance.
  Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.16 ～ 12	1 ～ 80	4 ～ 16	2	45 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.005 to +0.005 ～ -0.005～+0.005	Curved surface	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,112.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Long Ball Type , 2-Flute for Graphite GF-EBDL

  OSG

  Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	20 ～ 130	25 ～ 80	6 ～ 12	2	100 ～ 200	Graphite[◎]	-	Curved surface	Non-Coated	Ball

  From: ₹ 22,354.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Ball Type, 2-Flute for Graphite D-GF-LS-EBDR

  OSG

  Diamond coated end mill for graphite machining. Guarantees marvelously extended tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	10 ～ 65	25 ～ 130	4 ～ 12	2	100 ～ 200	Graphite[◎]	-	Curved surface	Dia Coat	Ball

  From: ₹ 31,853.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SFB200 CBN Super Finish Ball End Mill

  NS TOOL

  The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.5 ～ 5	4	2	50 ～ 52	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.003～-0.003 ～ 0.005～-0.005	Curved surface	Non-Coated	Ball

  From: ₹ 19,239.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  Standard type ball end mill for high hardness. Ideal for finishing

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Ball End Mill NCB-2

  NS TOOL

  Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.9	0.8 ～ 3.6	-	3	2	35	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.01～-0.01	Curved surface	Non-Coated	Ball

  From: ₹ 6,000.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Ball End Mill NSBL-2

  NS TOOL

  The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	15 ～ 30	-	6 ～ 12	2	120 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.02～-0.02	Curved surface	Non-Coated	Ball

  From: ₹ 9,706.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Ball-End Mill ALB225

  NS TOOL

  The unique blade shape suppresses chattering during corner and side machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.45 ～ 24	3 ～ 60	4 ～ 12	2	60 ～ 120	Aluminum[◎] / Resin[○]	0.01～-0.01	Curved surface	Non-Coated	Ball

  From: ₹ 2,359.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Ball End Mill, 2-Flute

  ATOM

  Good surface roughness of the cutting edge realizes high quality finished surface.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 0.475	0.2 ～ 2.5	-	3	2	40	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	-	Curved surface	Non-Coated	Ball

  From: ₹ 5,333.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2 Ball End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-10～+10	Curved surface	Non-Coated	Ball

  From: ₹ 4,117.65
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill SBEL

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	5 ～ 80	-	4 ～ 32	2	45 ～ 150	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	0～-50	Curved surface	Non-Coated	Ball

  From: ₹ 8,379.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Rib for Resin Processing PRB-2

  KYOWA SEIKO

  Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2.5	0.3 ～ 6	-	4 ～ 6	2	45 ～ 100	Aluminum[◎] / Resin[◎]	＋0.01～－0.01	Curved surface	-	Ball

  From: ₹ 4,624.89
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dedicated CoroMill Plura End Mill For Roughing 2B330

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 8	5 ～ 29	-	3 ～ 16	2	38 ～ 92	Aluminum[○] / Titanium[○]	-	Curved surface	Other	Ball

  From: ₹ 9,978.84
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 10	11 ～ 38	-	6 ～ 20	4	80 ～ 125	general steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	-	Curved surface	Other	Ball

  From: ₹ 7,391.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,231.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 2	0.6 ～ 4	-	6	2	40	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.003	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,564.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]
  ·Compatible with shrink fit chucks for high-precision machining
  ·Designed with short flute length and overall length for shrink fit and emphasis on rigidity
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,397.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 907.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]
  ·Good finish can be expected for surface coarse of workpiece after processing
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Long shank type ideal for deep cavity milling
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / short model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2 ～ 25	15 ～ 75	6 ～ 20	3	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 4-Flute / Short Type

  MISUMI

  [Features]
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 10	3 ～ 25	15 ～ 75	6 ～ 20	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide ball end mill, 2-flute / short model

  MISUMI

  Highly versatile due to the non-coated specification

  • Non-Coated
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 10	0.8 ～ 25	-	3 ～ 20	2	40 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	±0.01	Curved surface	Non-Coated	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	MISUMI	MISUMI	MISUMI	MISUMI	EIKOSHA	MISUMI	OSG	NS TOOL	WIDIN	MISUMI	MISUMI	EIKOSHA	ATOM	SANDVIK	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	ATOM	OKAZAKI SEIKO	DIJET	KYOWA SEIKO	SANDVIK	SANDVIK	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Ball End Type, 2-Flute WXL-EBD	Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model	XAC series carbide ball end mill, 2-flute / short model	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	XAC series carbide ball end mill, 2-flute / short, long shank model	Carbide Solid Ball End Mill CSBE	CBN Ball End Mill, 2-Flute	Ball-End Type, GX-EQD-SF	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	2-Blade Sander Ball	CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute	Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type	Standard Ball End Mill, 2-Flute	CoroMill Plura Carbide Ball End Mill, Diamond Coated, 2B230	TSC series carbide ball end mill, regular model	CBN Mold Finish Master BNBP	Ball End Type, 2-Flute CBN-SXB	Ball End Type, 2-Flute WXL-HS-EBD	Ball End Type, 2-Flute DIA-PC-EBD	Ball End Type, 2-Flute WXL-PC-EBD	End Long Ball Type , 2-Flute for Graphite GF-EBDL	Long Shank Ball Type, 2-Flute for Graphite D-GF-LS-EBDR	SFB200 CBN Super Finish Ball End Mill	MSBH230 2-Flute Ball-End Mill for High-Hardness	Miniature Ball End Mill NCB-2	Long Ball End Mill NSBL-2	Aluminum Ball-End Mill ALB225	Small Diameter Ball End Mill, 2-Flute	SBD2 Ball End Mill, 2-Flute, Non-Coated	Solid ball end mill SBEL	Carbide Ball End Mill for Rib for Resin Processing PRB-2	Dedicated CoroMill Plura End Mill For Roughing 2B330	CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAL series carbide ball end mill, 2-flute / short model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC Series Carbide Ball End Mill 4-Flute / Short Type	TSC series carbide ball end mill, 4-flute / regular model	Carbide ball end mill, 2-flute / short model
From	₹ 3,011.00	₹ 6,439.58	₹ 1,260.11	₹ 1,320.00	₹ 3,008.00	₹ 7,570.91	₹ 10,797.96	₹ 25,989.95	₹ 5,912.42	₹ 2,552.85	₹ 2,252.40	₹ 5,727.98	₹ 7,327.22	₹ 5,054.84	₹ 17,298.62		₹ 28,086.85	₹ 19,114.84	₹ 1,496.45	₹ 35,113.91	₹ 3,112.00	₹ 22,354.84	₹ 31,853.82	₹ 19,239.38	₹ 2,168.82	₹ 6,000.82	₹ 9,706.93	₹ 2,359.00	₹ 5,333.44	₹ 4,117.65	₹ 8,379.60	₹ 4,624.89	₹ 9,978.84	₹ 7,391.13	₹ 3,231.25	₹ 3,564.45	₹ 1,397.93	₹ 907.20
Days to Ship	5 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications		DIA Graphite 4 Flutes S (Short)	TiAlN General Steel 2 Flutes S (Short)		TiAlN General Steel 2 Flutes		High-Hardness Steel 2 Flutes				CrN Copper 2 Flutes S (Short)	DIA Graphite 2 Flutes L (Long)				TS General Steel 2 Flutes R (Regular)																			TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	XAL General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	Non-Coated General Steel 2 Flutes S (Short)
R Size(mm)	0.05 ～ 10	1 ～ 6	0.2 ～ 12.5	0.5 ～ 12.5	2 ～ 8	0.4 ～ 20	0.3 ～ 1	10	0.005 ～ 0.05	R0.75 ～ R10	0.5 ～ 6	0.5 ～ 6	0.5 ～ 15	0.5 ～ 10	0.5 ～ 6	0.2 ～ 8	0.2 ～ 1	0.2 ～ 1.5	0.1 ～ 6	0.5 ～ 3	0.1 ～ 6	1 ～ 6	1 ～ 6	0.1 ～ 1	0.05 ～ 6	0.2 ～ 0.9	3 ～ 6	0.3 ～ 6	0.05 ～ 0.475	0.5 ～ 12.5	0.5 ～ 15	0.1 ～ 2.5	1.5 ～ 8	2 ～ 10	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.05 ～ 10	0.05 ～ 10	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	0.2 ～ 10
Blade length (ℓ)(mm)	0.2 ～ 38	4 ～ 24	0.8 ～ 50	1 ～ 25	8 ～ 30	3 ～ 70	0.5 ～ 1.2	15	0.01 ～ 0.1	4 ～ 38	1.5 ～ 18	3 ～ 55	8 ～ 60	3 ～ 40	3 ～ 22	1.5 ～ 30	0.3 ～ 1.4	0.3 ～ 1.8	0.4 ～ 18	2.5 ～ 12	0.16 ～ 12	20 ～ 130	10 ～ 65	0.15 ～ 1.2	0.1 ～ 20	0.8 ～ 3.6	15 ～ 30	0.45 ～ 24	0.2 ～ 2.5	2 ～ 55	5 ～ 80	0.3 ～ 6	5 ～ 29	11 ～ 38	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.2 ～ 38	0.2 ～ 25	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	0.8 ～ 25
Underneck length (ℓ1)(mm)	-	-	-	2.2 ～ 50	-	-	1.5 ～ 5	-	-	-	-	20 ～ 65	-	-	-	17 ～ 80	1.2 ～ 5.5	1.2 ～ 6	-	30 ～ 150	1 ～ 80	25 ～ 80	25 ～ 130	0.5 ～ 5	-	-	-	3 ～ 60	-	-	-	-	-	-	-	-	-	-	15 ～ 75	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	-
Shank diameter (d)(mm)	4 ～ 20	6 ～ 12	3 ～ 25	4 ～ 25	4 ～ 16	4 ～ 32	4	12	4	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 25	4 ～ 20	3 ～ 12	4 ～ 16	4 ～ 6	4 ～ 6	4 ～ 12	6 ～ 12	4 ～ 16	6 ～ 12	4 ～ 12	4	4 ～ 12	3	6 ～ 12	4 ～ 12	3	4 ～ 25	4 ～ 32	4 ～ 6	3 ～ 16	6 ～ 20	6	6	4 ～ 12	3 ～ 20	3 ～ 20	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	3 ～ 20
Number of flutes(sheet)	2	4	2	2	2	2	2	2	1	2	2	2	2	2	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	4	2	2	2	2	2	2	3	3	4	4	2
Overall Length (L)(mm)	40 ～ 160	50 ～ 80	40 ～ 180	40 ～ 180	100 ～ 250	45 ～ 180	50	58	45	50 ～ 160	50 ～ 120	50 ～ 200	60 ～ 180	40 ～ 105	38 ～ 83	50 ～ 140	50	45 ～ 50	35 ～ 70	100 ～ 220	45 ～ 160	100 ～ 200	100 ～ 200	50 ～ 52	50 ～ 100	35	120 ～ 180	60 ～ 120	40	60 ～ 180	45 ～ 150	45 ～ 100	38 ～ 92	80 ～ 125	60 ～ 90	40	40 ～ 65	40 ～ 160	40 ～ 150	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	40 ～ 150
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	High Hardness Steel-HRC65[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Graphite[◎]	Graphite[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	Aluminum[◎] / Resin[◎]	Aluminum[○] / Titanium[○]	general steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]
R Precision(μm)	-0.007 to 0.003 ～ ±0.01	±0.01	±0.01	±5 ～ ±10	±0.01	±0.02	±0.005	-0.01～+0.01	0.002～-0.002	±0.01	±0.01	±0.01	±0.02	±0.01	-	-0.007 ~ +0.003 ～ ±0.01	-	-0.005～+0.005	-0.007～+0.003 ～ -0.005～+0.005	-	-0.005 to +0.005 ～ -0.005～+0.005	-	-	0.003～-0.003 ～ 0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.02～-0.02	0.01～-0.01	-	-10～+10	0～-50	＋0.01～－0.01	-	-	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01
Machining Application	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface
Coating	For General Steels (AlCrN, etc.)	Dia Coat	TiAlN	For High Hardness (Silicon Group)	TiAlN	-	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN	CrN	Dia Coat	-	Non-Coated	Other	For High Hardness (Silicon Group)	-	Non-Coated	For General Steels (AlCrN, etc.)	Dia Coat	For General Steels (AlCrN, etc.)	Non-Coated	Dia Coat	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	Other	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Spherical Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...