• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Ball-End Mill (DLC Coating) ALB225-DLC

  NS TOOL

  Adopts a highly adhesive DLC coating suited to long periods of machining.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.45 ～ 24	3 ～ 60	4 ～ 12	2	60 ～ 120	Aluminum[◎]	0.01～-0.01	Curved surface	DLC	Ball

  From: ₹ 3,642.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPB220 CBN Super Spiral Ball End Mill

  NS TOOL

  [Features]
  · Spiral ball shape used to improve sharpness of cutting edge.
  · The cutting edge shape used improves the chipping resistance of the cutting edge.
  · When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
  Torsion angle: 20°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.15 ～ 3.6	0.3 ～ 18	4	2	50 ～ 70	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.05～-0.05 ～ 5 to -5	Curved surface	Non-Coated	Ball

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Cut Ball 70 End Mill DH-OCHB Type

  DIJET

  [Features]
  · One mill for roughing to finishing high-hardness material.
  · 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
  · Reduces chattering by using high tool rigidity and unequal divisions.
  · Implements good cutting performance with low resistance, with a torsion angle of 45°.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  -	7.5 ～ 9	24 ～ 36	-	4	-	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	±8	Curved surface	Other	Ball

  From: ₹ 6,815.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,231.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 2	0.6 ～ 4	-	6	2	40	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.003	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,564.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]
  ·Compatible with shrink fit chucks for high-precision machining
  ·Designed with short flute length and overall length for shrink fit and emphasis on rigidity
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,397.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 907.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Long shank type, ideal for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	TiAlN	Ball

  From: ₹ 3,008.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]
  ·Good finish can be expected for surface coarse of workpiece after processing
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Long shank type ideal for deep cavity milling
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / short model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2 ～ 25	15 ～ 75	6 ～ 20	3	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 4-Flute / Short Type

  MISUMI

  [Features]
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 10	3 ～ 25	15 ～ 75	6 ～ 20	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide ball end mill, 2-flute / short model

  MISUMI

  Highly versatile due to the non-coated specification

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 10	0.8 ～ 25	-	3 ～ 20	2	40 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	±0.01	Curved surface	Non-Coated	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

  MISUMI

  [Features]
  ·High stiffness 2-flute type with length taper shape
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 5	0.3 ～ 8	2 ～ 60	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 2,143.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

  MISUMI

  [Features]
  ·High-feed, high stiffness 3-flute taper shape with taper length
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 6	7 ～ 60	4 ～ 8	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Tapered neck ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 3-flute / long neck model

  MISUMI

  [Features]
  ·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	3 ～ 50	4 ～ 6	2 ～ 3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 4-flute / long neck model

  MISUMI

  [Features]
  ·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 3	1.6 ～ 6	4 ～ 30	4 ～ 6	4	50 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

  MISUMI

  [Features]
  ·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).
  ·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	1 ～ 5	5 ～ 10	6 ～ 10	2	50 ～ 90	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 5,879.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,566.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

  MISUMI

  [Features]
  ·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
  ·Taper neck is effective in suppressing chattering
  ·Machining of high hardness steel up to 65HRC is possible
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	20 ～ 50	4 ～ 8	3	70 ～ 110	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 3,991.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

  MISUMI

  Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	3 ～ 15	-	6 ～ 10	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  From: ₹ 5,477.11
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  A type for aluminum that achieves high efficiency while having the affordable uncoated design

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	±0.01	Curved surface	Non-Coated	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

  MISUMI

  Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Aluminum[○] / Copper[◎] / Resin[○]	±0.01	Curved surface	CrN	Ball

  From: ₹ 2,252.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model

  MISUMI

  CrN coated products that are ideal for copper electrode processing are available at affordable prices

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 2	0.4 ～ 4	2 ～ 40	4 ～ 6	2	50 ～ 110	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	±0.005	Curved surface	CrN	Long-Neck Ball

  From: ₹ 2,138.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

  MISUMI

  Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.6 ～ 7.5	2 ～ 60	4 ～ 6	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface	Dia Coat	Long-Neck Ball

  From: ₹ 4,674.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model

  MISUMI

  The price of the non-coated product with excellent cost performance has been further reduced

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	10 ～ 55	20 ～ 65	4 ～ 12	2	100 ～ 200	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface	Non-Coated	Ball

  From: ₹ 4,354.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

  MISUMI

  Sharp edge that's suitable for machining resin

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	±0.01	Curved surface	Non-Coated	Ball

  From: ₹ 1,831.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	±0.005	Curved surface	Non-Coated	Ball

  From: ₹ 10,797.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

  MISUMI

  High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 10	0.4 ～ 25	-	4 ～ 20	2	50 ～ 150	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	±0.005 ～ ±0.01	Curved surface	MRC	Ball

  From: ₹ 1,074.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

  MISUMI

  The user friendly regular flute length type is released simultaneously

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	-	4 ～ 16	2	50 ～ 140	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	±0.005 ～ ±0.01	Curved surface	MRC	Ball

  From: ₹ 1,254.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

  MISUMI

  High-performance MRC series is available in the industry's largest number of sizes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	4 ～ 6	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	±0.005	Curved surface	MRC	Long-Neck Ball

  From: ₹ 1,171.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

  MISUMI

  The regular flute length type is introduced in the low-price and popular XAL balls

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 48	-	4 ～ 16	2	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Long Neck Hard Ball GSBNH2

  NACHI(FUJIKOSHI)

  [Features]
  · Ideal for fine machining of molds.
  · Available in various sizes and can be used for all kinds of machining.
  · Cutting blades with a tapered back make contact with a workpiece with a shorter length.
  · Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	-	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	-	Curved surface	TiAlN	Ball

  From: ₹ 2,882.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball Long Shank 2GEOLSR

  NACHI(FUJIKOSHI)

  [Features]
  A carbide end mill with 2 flutes.
  The high cutting speed and high production efficiency lead to overall production cost reduction.
  The long shank allows contouring at deep positions and can be lengthened to suit the application.
  [Applications]
  Suitable for side milling, curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	10 ～ 100	4 ～ 32	2	80 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	0～-0.04 ～ 0～-0.03	Curved surface	TiAlN	Ball

  From: ₹ 6,920.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck for Copper Work, Ball CURIBR

  NACHI(FUJIKOSHI)

  Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 50	4 ～ 6	2	45 ～ 120	Aluminum[◎] / Copper[◎]	-0.007～+0.003	Curved surface	CrN	Long-Neck Ball

  From: ₹ 3,792.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill, Ball 2DLCR

  NACHI(FUJIKOSHI)

  End mill for aluminum and copper alloys. Suitable for curved surface processing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	1.5 ～ 30	3 ～ 50	4 ～ 20	2	50 ～ 180	Aluminum[◎] / Copper[○]	0～-0.04 ～ 0～-0.03	Curved surface	DLC	Ball

  From: ₹ 5,843.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Ball GSBH

  NACHI(FUJIKOSHI)

  Suitable for high-speed finishing of high-hardness molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	0.6 ～ 7.5	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	Curved surface	TiAlN	Ball

  From: ₹ 6,542.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Ball 2GSR

  NACHI(FUJIKOSHI)

  Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5	15	-	10	2	100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	-0.01～+0.01	Curved surface	TiAlN	Ball

  From: ₹ 7,636.31
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mold Meister Ball 2MMR

  NACHI(FUJIKOSHI)

  Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	-0.003～+0.003	Curved surface	TiAlN	Ball

  From: ₹ 15,674.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball 2GEOR

  NACHI(FUJIKOSHI)

  Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	3 ～ 80	4 ～ 32	2	50 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	0～-0.04 ～ 0～-0.03	Curved surface	TiAlN	Ball

  From: ₹ 5,931.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Graphite DG-EBD

  OSG

  End mill with diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 6	8 ～ 60	-	4 ～ 12	2	80 ～ 200	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01	Curved surface	DG	Ball

  From: ₹ 17,251.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-SS-EBD

  OSG

  Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	12 ～ 22	-	5 ～ 11	2	120 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Curved surface	TiAlN	Ball

  From: ₹ 15,367.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6

  OSG

  Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 3.2	1 ～ 30	6	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎]	-0.005～+0.005	Curved surface	TiAlN	Ball

  From: ₹ 12,129.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	NS TOOL	NS TOOL	DIJET	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG
Product Series	Aluminum Ball-End Mill (DLC Coating) ALB225-DLC	SSPB220 CBN Super Spiral Ball End Mill	Single Cut Ball 70 End Mill DH-OCHB Type	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	(Economy series) XAL series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC Series Carbide Ball End Mill 4-Flute / Short Type	TSC series carbide ball end mill, 4-flute / regular model	Carbide ball end mill, 2-flute / short model	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 3-flute / long neck model	TSC series carbide long neck ball end mill, 4-flute / long neck model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model	CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)	Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model	Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model	CBN Ball End Mill, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	(Economy series) XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	GS MILL Long Neck Hard Ball GSBNH2	X's Mill Geo Ball Long Shank 2GEOLSR	Long Neck for Copper Work, Ball CURIBR	DLC Mill, Ball 2DLCR	GS MILL Hard Ball GSBH	GS MILL Ball 2GSR	Mold Meister Ball 2MMR	X's Mill Geo Ball 2GEOR	Ball End Type, 2-Flute for Graphite DG-EBD	Ball End Type, 2-Flute FX-SS-EBD	Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6
From	₹ 3,642.15		₹ 6,815.16	₹ 3,231.25	₹ 3,564.45	₹ 1,397.93	₹ 907.20	₹ 3,008.00								₹ 2,143.38				₹ 5,879.24	₹ 3,566.73	₹ 3,991.73	₹ 5,477.11		₹ 2,252.40	₹ 2,138.04	₹ 4,674.82	₹ 4,354.71	₹ 1,831.31	₹ 10,797.96	₹ 1,074.55	₹ 1,254.00	₹ 1,171.25		₹ 2,882.15	₹ 6,920.98	₹ 3,792.93	₹ 5,843.55	₹ 6,542.71	₹ 7,636.31	₹ 15,674.47	₹ 5,931.73	₹ 17,251.75	₹ 15,367.22	₹ 12,129.91
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications
R Size(mm)	0.3 ～ 6	0.1 ～ 3	-	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.05 ～ 10	2 ～ 8	0.05 ～ 10	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	0.2 ～ 10	0.15 ～ 5	0.5 ～ 3	0.5 ～ 3	1 ～ 3	1 ～ 5	0.3 ～ 3	0.5 ～ 3	1 ～ 5	0.5 ～ 6	0.5 ～ 6	0.2 ～ 2	0.2 ～ 3	1 ～ 6	0.5 ～ 6	0.3 ～ 1	0.1 ～ 10	0.2 ～ 8	0.05 ～ 3	0.2 ～ 8	0.1 ～ 3	0.5 ～ 15	0.1 ～ 3	0.5 ～ 10	0.2 ～ 6	5	0.5 ～ 6	0.5 ～ 15	2 ～ 6	3 ～ 6	0.1 ～ 2
Blade length (ℓ)(mm)	0.45 ～ 24	0.15 ～ 3.6	7.5 ～ 9	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.2 ～ 38	8 ～ 30	0.2 ～ 25	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	0.8 ～ 25	0.3 ～ 8	0.8 ～ 6	0.8 ～ 4.8	1.6 ～ 6	1 ～ 5	0.6 ～ 6	0.8 ～ 4.8	3 ～ 15	1.5 ～ 18	1.5 ～ 18	0.4 ～ 4	0.6 ～ 7.5	10 ～ 55	1.5 ～ 18	0.5 ～ 1.2	0.4 ～ 25	1.5 ～ 30	0.07 ～ 6	1.5 ～ 48	0.2 ～ 6	1.5 ～ 45	0.2 ～ 6	1.5 ～ 30	0.4 ～ 12	15	1.5 ～ 18	1.5 ～ 45	8 ～ 60	12 ～ 22	0.16 ～ 3.2
Underneck length (ℓ1)(mm)	3 ～ 60	0.3 ～ 18	24 ～ 36	-	-	-	-	-	15 ～ 75	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	-	2 ～ 60	7 ～ 60	3 ～ 50	4 ～ 30	5 ～ 10	-	20 ～ 50	-	14 ～ 68	-	2 ～ 40	2 ～ 60	20 ～ 65	-	1.5 ～ 5	-	-	0.2 ～ 60	-	-	10 ～ 100	0.5 ～ 50	3 ～ 50	0.6 ～ 7.5	-	-	3 ～ 80	-	-	1 ～ 30
Shank diameter (d)(mm)	4 ～ 12	4	-	6	6	4 ～ 12	3 ～ 20	4 ～ 16	3 ～ 20	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	3 ～ 20	4 ～ 12	4 ～ 8	4 ～ 6	4 ～ 6	6 ～ 10	6	4 ～ 8	6 ～ 10	4 ～ 12	4 ～ 12	4 ～ 6	4 ～ 6	4 ～ 12	4 ～ 12	4	4 ～ 20	4 ～ 16	4 ～ 6	4 ～ 16	4 ～ 6	4 ～ 32	4 ～ 6	4 ～ 20	4 ～ 12	10	4 ～ 12	4 ～ 32	4 ～ 12	5 ～ 11	6
Number of flutes(sheet)	2	2	4	2	2	2	2	2	2	2	3	3	4	4	2	2	3	2 ～ 3	4	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	60 ～ 120	50 ～ 70	-	60 ～ 90	40	40 ～ 65	40 ～ 160	100 ～ 250	40 ～ 150	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	40 ～ 150	50 ～ 110	50 ～ 110	50 ～ 110	50 ～ 70	50 ～ 90	40	70 ～ 110	50 ～ 100	50 ～ 110	50 ～ 120	50 ～ 110	50 ～ 110	100 ～ 200	50 ～ 120	50	50 ～ 150	50 ～ 140	50 ～ 110	50 ～ 140	45 ～ 120	80 ～ 230	45 ～ 120	50 ～ 180	50 ～ 110	100	50 ～ 120	50 ～ 200	80 ～ 200	120 ～ 160	50 ～ 100
work material	Aluminum[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎]
R Precision(μm)	0.01～-0.01	0.05～-0.05 ～ 5 to -5	±8	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.01	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	±0.01	±0.005	±0.01	±0.01	±0.01	±0.005	±0.005 ～ ±0.01	±0.005 ～ ±0.01	±0.005	-0.007 ~ +0.003 ～ ±0.01	-	0～-0.04 ～ 0～-0.03	-0.007～+0.003	0～-0.04 ～ 0～-0.03	-	-0.01～+0.01	-0.003～+0.003	0～-0.04 ～ 0～-0.03	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005
Machining Application	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface
Coating	DLC	Non-Coated	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	CrN	CrN	Dia Coat	Non-Coated	Non-Coated	Non-Coated	MRC	MRC	MRC	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	CrN	DLC	TiAlN	TiAlN	TiAlN	TiAlN	DG	TiAlN	TiAlN
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...