Long Neck Square End Mills (Carbide)（Machining Application：Plunging (Z feed)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Long Blade End Mill KSEL-2

  KYOWA SEIKO

  Carbide long flute length end mill, KSEL-2
  ·An end mill with 4 to 12 times flute length.
  ·Helix angle: Standard helix angle (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.3 ～ 60	-	3 ～ 6	2	40 ～ 100	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	Standard torsion (30-40°)	Plunging (Z feed)	Non-Coated	-	Square

  From: ₹ 5,116.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
  · Provides unprecedented long life and can be used for both dry and wet applications

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 3	2.5 ～ 15	-	4 ～ 6	3	45 ～ 60	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Plunging (Z feed)	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 3,434.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

  OSG

  [Features]
  · WXL coating with excellent lubrication and wear resistance.
  Can be used with a wide range of work materials and cutting applications. Multiple variations available.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 12	0.15 ～ 18	0.3 ～ 60	4 ～ 12	2	45 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Standard torsion (30-40°)	Plunging (Z feed)	For General Steels (AlCrN, etc.)	Sharp Edge / With Lead	Long-Neck Square

  From: ₹ 1,544.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS

  OSG

  Ideal for rib groove machining or machining detailed components when there is a problem with interference, etc. Select the effective length according to the processing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.15 ～ 9	0.3 ～ 60	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plunging (Z feed)	TiAlN	Sharp Edge / With Lead	Long-Neck Square

  From: ₹ 3,663.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC-AZS, DLC Coat, 3-Flute Long Neck Square [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
  · The DLC coating provides outstanding wear resistance and resistance to weld adhesion
  · Adopts a 45° torsion angle to achieve excellent chip discharge performance
  · The blade shape dedicated for aluminum greatly suppresses the generation of burrs
  · Tip chipping has been greatly reduced by adopting a micro flat land
  · O.D. Tolerance: 0/-0.015 (D ≤ 6), 0/-0.005 (D ≥ 8)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	3 ～ 36	4 ～ 12	3	60 ～ 110	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Plunging (Z feed)	DLC	With Lead	Long-Neck Square

  From: ₹ 3,142.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Multi-function square long neck type with high feed capability and excellent durability
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1.5 ～ 5	4.5 ～ 13	10 ～ 40	6	3	50 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plunging (Z feed)	For High Hardness (Silicon Group)	With Lead	Long-Neck Square

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Long Neck Square End Mill

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Effective for deep cutting due to long neck type
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Can process heat-treated steel up to 50HRC
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.2 ～ 12	0.3 ～ 20	0.5 ～ 50	4 ～ 12	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	Plunging (Z feed)	-	-	Long-Neck Square

  From: ₹ 1,348.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS

  OSG

  Short-blade, long-neck type end mill with ultra-smooth DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	0.7 ～ 9	2.5 ～ 30	6	2	60 ～ 90	Aluminum[◎] / Copper[○] / Resin[◎]	Standard torsion (30-40°)	Plunging (Z feed)	DLC	With Lead	Long-Neck Square

  From: ₹ 7,203.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6

  OSG

  End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 2.5	0.7 ～ 3.7	2.5 ～ 12.5	6	2	60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plunging (Z feed)	TiAlN	Sharp Edge / With Lead	Long-Neck Square

  From: ₹ 6,970.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS

  OSG

  Short blade with long neck shape and high rigidity that enables high efficiency, high precision machining even with large blade exposure. Ideal for high-speed / high-precision machining of copper electrodes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	0.7 ～ 18	2.5 ～ 60	6 ～ 12	2	60 ～ 140	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plunging (Z feed)	CrN	With Lead	Long-Neck Square

  From: ₹ 6,689.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
  · Adopts a 45° torsion angle to achieve excellent chip discharge performance
  · The blade shape dedicated for aluminum greatly suppresses the generation of burrs
  · Tip chipping has been greatly reduced by adopting a micro flat land

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	3 ～ 50	4 ～ 12	3	60 ～ 110	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Plunging (Z feed)	Non-Coated	With Lead	Long-Neck Square

  From: ₹ 2,988.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T Multi-Flute, for High Hardness, Long Blade Length

  Poulten&Graf

  [Features]
  · Can be used with hardened steel up to HRC 65 thanks to its use of highest-grade 200 Nano material as well as a high hardness, highly heat resistant oxidized silicon-based (SI) coating.
  · It supports high-speed machining and has a long service life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  8 ～ 20	35 ～ 75	-	8 ～ 20	6 ～ 8	100 ～ 150	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○]	Powerful Torsion (45°-60°)	Plunging (Z feed)	-	-	Long-Neck Square

  From: ₹ 8,021.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Blade Pin Angle Sander EM Long

  WIDIN

  [Features]
  · Long two-blade pin square sander EM.
  · Supports flexible material and aluminum alloy.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 130	-	3 ～ 20	-	60 ～ 250	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plunging (Z feed)	TiAlN	Sharp Edge	High Helical

  From: ₹ 2,692.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Blade Pin Square Sander, EM Long

  WIDIN

  [Features]
  · Long four-blade pin square sander EM.
  · Supports flexible material and aluminum alloy.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 16	25 ～ 80	-	6 ～ 16	-	100 ～ 200	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plunging (Z feed)	TiAlN	Sharp Edge	High Helical

  From: ₹ 3,948.51
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KYOWA SEIKO	UNION TOOL	OSG	OSG	UNION TOOL	MISUMI	MISUMI	OSG	OSG	OSG	UNION TOOL	Poulten&Graf	WIDIN	WIDIN
Product Series	Carbide Long Blade End Mill KSEL-2	HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]	Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS	DLC-AZS, DLC Coat, 3-Flute Long Neck Square [Alteration Supported Product]	TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model	VAC Series Carbide 2-Flute Long Neck Square End Mill	Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6	2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS	AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]	SPEED/T Multi-Flute, for High Hardness, Long Blade Length	2-Blade Pin Angle Sander EM Long	4-Blade Pin Square Sander, EM Long
From	₹ 5,116.45	₹ 3,434.56	₹ 1,544.67	₹ 3,663.60	₹ 3,142.58		₹ 1,348.16	₹ 7,203.62	₹ 6,970.56	₹ 6,689.29	₹ 2,988.55	₹ 8,021.60	₹ 2,692.15	₹ 3,948.51
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Specifications						TS General Steel 3 Flutes
Blade diameter (D)(φ)	0.1 ～ 6	1 ～ 3	0.1 ～ 12	0.1 ～ 6	1 ～ 12	1.5 ～ 5	0.2 ～ 12	0.5 ～ 6	0.5 ～ 2.5	0.5 ～ 12	1 ～ 12	8 ～ 20	3 ～ 20	5 ～ 16
Blade length (ℓ)(mm)	0.3 ～ 60	2.5 ～ 15	0.15 ～ 18	0.15 ～ 9	2 ～ 24	4.5 ～ 13	0.3 ～ 20	0.7 ～ 9	0.7 ～ 3.7	0.7 ～ 18	2 ～ 24	35 ～ 75	15 ～ 130	25 ～ 80
Underneck length (ℓ1)(mm)	-	-	0.3 ～ 60	0.3 ～ 60	3 ～ 36	10 ～ 40	0.5 ～ 50	2.5 ～ 30	2.5 ～ 12.5	2.5 ～ 60	3 ～ 50	-	-	-
Shank diameter (d)(mm)	3 ～ 6	4 ～ 6	4 ～ 12	4 ～ 6	4 ～ 12	6	4 ～ 12	6	6	6 ～ 12	4 ～ 12	8 ～ 20	3 ～ 20	6 ～ 16
Number of flutes(sheet)	2	3	2	2	3	3	2	2	2	2	3	6 ～ 8	-	-
Overall Length (L)(mm)	40 ～ 100	45 ～ 60	45 ～ 140	45 ～ 120	60 ～ 110	50 ～ 60	40 ～ 110	60 ～ 90	60	60 ～ 140	60 ～ 110	100 ～ 150	60 ～ 250	100 ～ 200
work material	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)
Coating	Non-Coated	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	DLC	For High Hardness (Silicon Group)	-	DLC	TiAlN	CrN	Non-Coated	-	TiAlN	TiAlN
Blade tip shape	-	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	-	With Lead	Sharp Edge / With Lead	With Lead	With Lead	-	Sharp Edge	Sharp Edge
Type	Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	High Helical	High Helical

Loading...