• You can add up to 6 items per a category to the compare list. Compare

  

  SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	-	6 ～ 20	6	50 ～ 105	High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Sharp Edge	Square

  From: ₹ 5,773.15
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	-	6 ～ 20	6	80 ～ 150	High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Sharp Edge	Square

  From: ₹ 7,229.05
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut 70 DV-SEH

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  8	20	-	8	6	75	High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Side	-	Sharp Edge	High Helical

  From: ₹ 7,802.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut 70 (with Fine Corner R) DV-SEHH-R02

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4	12	-	6	4	60	High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Side	-	Micro R	High Helical

  From: ₹ 5,546.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Welded Edge End Mill DZ-SEPL

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  16 ～ 30	70 ～ 110	-	16 ～ 32	6	150 ～ 200	High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	High Helical

  From: ₹ 29,228.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Short)

  KYOCERA

  End mill for high hardness materials that has achieved long tool lifespan and stable machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 26	-	6 ～ 12	4 ～ 7	60 ～ 90	High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Plane / Side	For General Steels (AlCrN, etc.)	With Lead	High Helical

  From: ₹ 6,787.60
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium)

  KYOCERA

  End mill for high hardness materials that has achieved long tool lifespan and stable machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 25	5 ～ 53	-	6 ～ 25	4 ～ 8	60 ～ 125	High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove	For General Steels (AlCrN, etc.)	With Lead	High Helical

  From: ₹ 6,787.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute High-Hardness End Mill 55° E168TX

  7 LEADERS

  [Features]
  · High performance 4-flute 55° high torsion end mill for machining high hardness materials with UMG carbide substrate.
  · Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
  · Nanoparticle multilayer coating.
  · Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
  · Suitable for a wide range of work materials from general steel to high hardness steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	4	50 ～ 100	High Hardness Steel-HRC65[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	-	With Lead	High Helical

  From: ₹ 3,620.35
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid Carbide High Helix End Mill (6 Flutes) IC6HXE

  THE CUT

  [Features]
  · Outstanding cost performance.
  · The special coating improves wear resistance.
  · Also good for machining high hardness steel.
  · All sizes features 6 flutes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 12	15 ～ 30	-	6 ～ 12	6	60 ～ 100	High Hardness Steel-HRC65[○]	Powerful Torsion (45°-60°)	Side	-	-	High Helical

  From: ₹ 4,003.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	KYOCERA	KYOCERA	7 LEADERS	THE CUT
Product Series	SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated	SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated	One Cut 70 DV-SEH	One Cut 70 (with Fine Corner R) DV-SEHH-R02	One Cut Welded Edge End Mill DZ-SEPL	For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Short)	For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium)	Carbide 4-Flute High-Hardness End Mill 55° E168TX	Solid Carbide High Helix End Mill (6 Flutes) IC6HXE
From	₹ 5,773.15	₹ 7,229.05	₹ 7,802.33	₹ 5,546.78	₹ 29,228.60	₹ 6,787.60	₹ 6,787.60	₹ 3,620.35	₹ 4,003.85
Days to Ship	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more
Blade diameter (D)(φ)	6 ～ 20	6 ～ 20	8	4	16 ～ 30	1 ～ 12	1 ～ 25	3 ～ 20	6 ～ 12
Blade length (ℓ)(mm)	15 ～ 45	15 ～ 45	20	12	70 ～ 110	4 ～ 26	5 ～ 53	8 ～ 38	15 ～ 30
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 20	8	6	16 ～ 32	6 ～ 12	6 ～ 25	6 ～ 20	6 ～ 12
Number of flutes(sheet)	6	6	6	4	6	4 ～ 7	4 ～ 8	4	6
Overall Length (L)(mm)	50 ～ 105	80 ～ 150	75	60	150 ～ 200	60 ～ 90	60 ～ 125	50 ～ 100	60 ～ 100
work material	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Machining Application	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Side	Side	Side	Plane / Side	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Side
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	-
Blade tip shape	Sharp Edge	Sharp Edge	Sharp Edge	Micro R	Sharp Edge	With Lead	With Lead	With Lead	-
Type	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical

Loading...