Multi-Function Square End Mills (Carbide)（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura HD, Carbide Solid End Mill (With square center-cut oil hole)

  SANDVIK

  [Features]
  · Internal lubrication gives good chip discharge properties.
  · Twice the cutting depth that was conventionally possible
  · Ideal for everything from shoulder cutting to full grooving.
  · With reinforced edge lines, assures long product life even with intense machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  -	-	-	10	4	72	Quenched and tempered steel[○]	Standard torsion (30-40°)	-	-	-	Square

  From: ₹ 21,310.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

  MISUMI

  Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	7 ～ 35	-	6 ～ 16	3	60 ～ 105	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	C plane	Square

  From: ₹ 4,039.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver

  GUHRING

  [Features]
  · A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.
  · Furthermore, all of these processes can be done at high speed and high feed rate.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 20	11 ～ 38	18 ～ 52	6 ～ 20	-	57 ～ 104	Quenched and tempered steel[○]	Variable lead	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	Micro R	Square

  From: ₹ 4,896.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 6-Flute End Mill for High Hardness 45°, E167TX

  7 LEADERS

  [Features]
  ·High-performance 6-flute 45° helix angle long end mill for processing high-hardness materials using UMG carbide material as the base material
  ·Highly efficient machining is possible by side cutting of high hardness material (Up to HRC70)
  ·Multi-layer coating of nanoparticles
  ·Due to high film hardness and oxidation resistance onset temperature, it is suitable for processing high hardness materials from HRC45 to 70
  ·Suitable for a wide range of work materials from general steel to high hardness steel

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	26 ～ 76	-	6 ～ 20	6	80 ～ 160	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	-	With Lead	High Helical

  From: ₹ 6,213.42
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 38	-	4 ～ 20	4	45 ～ 125	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,256.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	4	60 ～ 130	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  
  ·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.
  ·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 22	3.5 ～ 30	30 ～ 140	6 ～ 20	4	80 ～ 200	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  From: ₹ 3,584.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  10 ～ 12	15 ～ 18	-	9 ～ 11	4	150 ～ 160	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	Square

  From: ₹ 12,251.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill KSV-2

  KYOWA SEIKO

  Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	1 ～ 12	-	3 ～ 6	2	40 ～ 70	Quenched and tempered steel[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed) / Countersinking	Non-Coated	-	-

  From: ₹ 5,116.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill KSVA-2

  KYOWA SEIKO

  [Features]
  A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
  The high cutting speed and high production efficiency lead to overall production cost reduction.
  [Applications]
  V-grooving, chamfering, side milling, etc. can be performed with this product alone.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	2 ～ 12	-	4 ～ 6	2	45 ～ 60	Quenched and tempered steel[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed) / Countersinking	TiAlN	-	-

  From: ₹ 6,735.78
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 26	-	4 ～ 12	3	45 ～ 100	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,351.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	3.5 ～ 30	30 ～ 140	6 ～ 20	3	80 ～ 200	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 4,339.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Square End Mill

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Suppresses chattering with unequal lead and unequal flutes
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Stable machining is possible while maintaining finished surface accuracy
  ·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	6 ～ 45	-	6 ～ 20	4	50 ～ 100	Quenched and tempered steel[◎]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: ₹ 2,125.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: ₹ 6,302.20
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX

  7 LEADERS

  [Features]
  · High performance 4/6-flute 45° torsion end mill for machining high hardness materials with UMG carbide substrate.
  · Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
  · Nanoparticle Multilayer Coating
  · Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
  · Suitable for a wide range of work materials from general steel to high hardness steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	4 ～ 6	50 ～ 100	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	-	With Lead	High Helical

  From: ₹ 3,123.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	14 ～ 68	6 ～ 12	3	60 ～ 100	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 73	4 ～ 20	3	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	3	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	3	60 ～ 130	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	3	60 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 16	1.5 ～ 24	14 ～ 74	6 ～ 16	4	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 72	4 ～ 20	4	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	4	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	4	60 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

  MISUMI

  Ideal for the standing-wall finish of stainless steel

  • TS
  • SUS
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	10.5 ～ 38	-	6 ～ 12	3	60 ～ 100	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Square

  From: ₹ 5,560.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

  MISUMI

  MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 26	-	6 ～ 12	4	60 ～ 100	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 2,512.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

  MISUMI

  Introducing a regular type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 48	-	4 ～ 12	4	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,284.84
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

  MISUMI

  Introducing a long type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	5 ～ 60	-	4 ～ 12	4	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,565.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

  MISUMI

  [Features]
  ・Adopts unequal leads to suppress chatter and achieve high efficiency machining
  ・Optimum groove shape realizes smooth chip discharge
  ・Minimum electrical conductivity
  ・Can be re-polished.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	8 ～ 38	-	6 ～ 25	4	57 ～ 104	Quenched and tempered steel[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: ₹ 2,089.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

  MISUMI

  [Features]
  ·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
  ·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	7 ～ 26	-	6 ～ 20	4	54 ～ 92	Quenched and tempered steel[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: ₹ 1,862.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE3 High-Helix End Mill, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  3-flute type with high-torsion grooves enables everything from rough machining to finishing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: ₹ 3,058.18
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4 High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: ₹ 3,058.18
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	4	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  From: ₹ 3,322.05
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: ₹ 4,713.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  [Features]
  A slim shank high helical end mill made of cemented carbide, 4 flutes.
  It is resistant to chipping and can be used in a wide range of applications, from general steel to stainless steel.
  The slim shank design allows for flexible adjustment of the protrusion length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 22	8 ～ 32	-	4 ～ 20	4	70 ～ 150	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: ₹ 4,977.55
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The reverse step design eliminates shank interference when performing mold pocket processing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 22	12 ～ 32	-	6 ～ 20	4	80 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: ₹ 8,686.33
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

  OKAZAKI SEIKO

  A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	TiAlN	Sharp Edge	High Helical

  From: ₹ 2,329.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

  OKAZAKI SEIKO

  It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: ₹ 2,329.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute Super One-Cut End Mill DV-SOCS3

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  16 ～ 20	32 ～ 38	-	16 ～ 20	3	110 ～ 125	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Side / Groove / Plunging (Z feed)	-	Sharp Edge	Square

  From: ₹ 25,067.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid end mill SEM4 type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 8	6.5 ～ 20	-	4 ～ 8	4	40 ～ 64	Quenched and tempered steel[◎]	Standard torsion (30-40°)	Side / Groove	TiAlN	Sharp Edge	Square

  From: ₹ 1,176.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill (with Rounded Tip) KSVRA-2

  KYOWA SEIKO

  [Features]
  A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
  The R-shaped tip can be used for 3D machining and rounding.
  The high cutting speed and high production efficiency lead to overall production cost reduction.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	2 ～ 12	-	4 ～ 6	2	50 ～ 60	Quenched and tempered steel[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed) / Countersinking	TiAlN	-	-

  From: ₹ 8,213.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA

  OKAZAKI SEIKO

  [Features]
  · Carbide end mills for plunge milling that enable non-step plunge cut feed, and further fluting as is.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  18	-	-	-	-	-	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove	TiAlN	-	High Helical

  From: ₹ 5,573.56
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	MISUMI	GUHRING	7 LEADERS	MISUMI	MISUMI	MISUMI	DIJET	KYOWA SEIKO	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	KYOWA SEIKO	OKAZAKI SEIKO
Product Series	CoroMill Plura HD, Carbide Solid End Mill (With square center-cut oil hole)	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver	Carbide 6-Flute End Mill for High Hardness 45°, E167TX	XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)	Carbide Center V End Mill KSV-2	Carbide Center V End Mill KSVA-2	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated	Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4 High-Helix End Mill, 4-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated	SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated	SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated	3-Flute Super One-Cut End Mill DV-SOCS3	Solid end mill SEM4 type	Carbide Center V End Mill (with Rounded Tip) KSVRA-2	Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA
From	₹ 21,310.11	₹ 4,039.16	₹ 4,896.80	₹ 6,213.42	₹ 1,256.71		₹ 3,584.00	₹ 12,251.78	₹ 5,116.45	₹ 6,735.78	₹ 1,351.00	₹ 4,339.18	₹ 2,125.22	₹ 6,302.20	₹ 3,123.44										₹ 5,560.71	₹ 2,512.00	₹ 1,284.84	₹ 1,565.15	₹ 2,089.00	₹ 1,862.64	₹ 3,058.18	₹ 3,058.18	₹ 3,322.05	₹ 4,713.67	₹ 4,977.55	₹ 8,686.33	₹ 2,329.56	₹ 2,329.56	₹ 25,067.11	₹ 1,176.35	₹ 8,213.13	₹ 5,573.56
Days to Ship	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	9 Day(s) or more
Specifications		TS SUS 3 Flutes S (Short)			XAL General Steel 4 Flutes	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)				XAL General Steel 3 Flutes	TS General Steel 3 Flutes S (Short)				TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes L (Long)	TS SUS 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	-	3 ～ 16	4 ～ 20	6 ～ 20	2 ～ 20	1 ～ 20	2 ～ 22	10 ～ 12	0.5 ～ 6	1 ～ 6	1 ～ 12	2 ～ 20	2 ～ 20	3 ～ 20	3 ～ 20	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	3 ～ 16	2 ～ 20	3 ～ 12	3 ～ 12	1 ～ 12	1 ～ 12	3 ～ 25	3 ～ 20	3 ～ 20	3 ～ 25	3 ～ 20	3 ～ 20	5 ～ 22	7 ～ 22	3 ～ 20	3 ～ 25	16 ～ 20	2 ～ 8	1 ～ 6	18
Blade length (ℓ)(mm)	-	7 ～ 35	11 ～ 38	26 ～ 76	5 ～ 38	4 ～ 56	3.5 ～ 30	15 ～ 18	1 ～ 12	2 ～ 12	1.5 ～ 26	3.5 ～ 30	6 ～ 45	15 ～ 80	8 ～ 38	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	1.5 ～ 24	3 ～ 38	5 ～ 40	5 ～ 75	10.5 ～ 38	8 ～ 26	4 ～ 48	5 ～ 60	8 ～ 38	7 ～ 26	10 ～ 45	10 ～ 50	10 ～ 45	15 ～ 80	8 ～ 32	12 ～ 32	10 ～ 45	10 ～ 50	32 ～ 38	6.5 ～ 20	2 ～ 12	-
Underneck length (ℓ1)(mm)	-	-	18 ～ 52	-	-	26 ～ 92	30 ～ 140	-	-	-	-	30 ～ 140	-	-	-	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	14 ～ 74	18 ～ 72	22 ～ 78	30 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	10	6 ～ 16	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	9 ～ 11	3 ～ 6	4 ～ 6	4 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	16 ～ 20	4 ～ 8	4 ～ 6	-
Number of flutes(sheet)	4	3	-	6	4	4	4	4	2	2	3	3	4	4	4 ～ 6	3	3	3	3	3	4	4	4	4	3	4	4	4	4	4	3	4	4	4	4	4	3	4	3	4	2	-
Overall Length (L)(mm)	72	60 ～ 105	57 ～ 104	80 ～ 160	45 ～ 125	60 ～ 130	80 ～ 200	150 ～ 160	40 ～ 70	45 ～ 60	45 ～ 100	80 ～ 200	50 ～ 100	70 ～ 150	50 ～ 100	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 110	60 ～ 110	60 ～ 110	60 ～ 150	60 ～ 100	60 ～ 100	45 ～ 105	45 ～ 105	57 ～ 104	54 ～ 92	45 ～ 105	45 ～ 120	45 ～ 105	70 ～ 150	70 ～ 150	80 ～ 150	45 ～ 105	45 ～ 120	110 ～ 125	40 ～ 64	50 ～ 60	-
work material	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]
Torsion Angle (θ)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Variable lead	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)
Machining Application	-	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Side	Side / Groove / Plunging (Z feed) / Countersinking	Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Side / Groove / Plunging (Z feed)	Side / Groove	Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove
Coating	-	For High Hardness (Silicon Group)	-	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	-	TiAlN	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	-	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	-	TiAlN	TiAlN	TiAlN
Blade tip shape	-	C plane	Micro R	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge	-	-	With Lead	With Lead	-	Sharp Edge	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	C plane	With Lead	With Lead	With Lead	-	-	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	-	-
Type	Square	Square	Square	High Helical	Square	Square	Square	Square	-	-	Square	Square	Square	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square	Square	-	High Helical

Loading...