Multi-Function Square End Mills (Carbide)（Machining Application：Groove）

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 6-Flute End Mill for High Hardness 45°, E167TX

  7 LEADERS

  [Features]
  ·High-performance 6-flute 45° helix angle long end mill for processing high-hardness materials using UMG carbide material as the base material
  ·Highly efficient machining is possible by side cutting of high hardness material (Up to HRC70)
  ·Multi-layer coating of nanoparticles
  ·Due to high film hardness and oxidation resistance onset temperature, it is suitable for processing high hardness materials from HRC45 to 70
  ·Suitable for a wide range of work materials from general steel to high hardness steel

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	26 ～ 76	-	6 ～ 20	6	80 ～ 160	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	Powerful Torsion (45°-60°)	Groove	-	With Lead	High Helical

  From: ₹ 6,213.42
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

  MISUMI

  Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	7 ～ 35	-	6 ～ 16	3	60 ～ 105	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	C plane	Square

  From: ₹ 4,039.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill KSV-2

  KYOWA SEIKO

  Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	1 ～ 12	-	3 ～ 6	2	40 ～ 60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Standard torsion (30-40°)	Groove	Non-Coated	-	-

  From: ₹ 5,116.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 26	-	4 ～ 12	3	45 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Powerful Torsion (45°-60°)	Groove	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,351.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	3.5 ～ 30	30 ～ 140	6 ～ 20	3	80 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 4,339.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCX SA Coated 6-Flute Carbide End Mill

  SANKO MFG

  [Features]
  · Excellent rigidity; ideal for high-speed machining.
  · Achieves precision finishing with little tilt.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 32	10 ～ 65	-	6 ～ 32	6	50 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	TiAlN	With Lead	High Helical

  From: ₹ 6,077.18
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	High Helical

  From: ₹ 3,389.02
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 22	5 ～ 33	-	4 ～ 20	3	70 ～ 200	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	Square

  From: ₹ 4,826.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill (with Rounded Tip) KSVRA-2

  KYOWA SEIKO

  [Features]
  A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
  The R-shaped tip can be used for 3D machining and rounding.
  The high cutting speed and high production efficiency lead to overall production cost reduction.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	2 ～ 12	-	4 ～ 6	2	50 ～ 60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Standard torsion (30-40°)	Groove	TiAlN	-	-

  From: ₹ 8,213.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX

  7 LEADERS

  [Features]
  · High performance 4/6-flute 45° torsion end mill for machining high hardness materials with UMG carbide substrate.
  · Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
  · Nanoparticle Multilayer Coating
  · Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
  · Suitable for a wide range of work materials from general steel to high hardness steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	4 ～ 6	50 ～ 100	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	Powerful Torsion (45°-60°)	Groove	-	With Lead	High Helical

  From: ₹ 3,123.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	14 ～ 68	6 ～ 12	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 73	4 ～ 20	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	3	60 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

  MISUMI

  Ideal for the standing-wall finish of stainless steel

  • TS
  • SUS
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	10.5 ～ 38	-	6 ～ 12	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	C plane	Square

  From: ₹ 5,560.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

  MISUMI

  3-flute structure that's excellent in discharging chips

  • DLC
  • Aluminum
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	17 ～ 50	4 ～ 12	3	40 ～ 80	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Groove	DLC	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

  MISUMI

  Given the rounded edge on the blade rear end, it suppresses machining streaks

  • DLC
  • Aluminum
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 22	9 ～ 33	-	4 ～ 20	3	80 ～ 200	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Groove	DLC	Micro R	Square

  From: ₹ 4,595.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Square End Mill

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Suppresses chattering with unequal lead and unequal flutes
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Stable machining is possible while maintaining finished surface accuracy
  ·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	6 ～ 45	-	6 ～ 20	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	Groove	-	-	Square

  From: ₹ 2,125.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

  MISUMI

  [Features]
  ・Adopts unequal leads to suppress chatter and achieve high efficiency machining
  ・Optimum groove shape realizes smooth chip discharge
  ・Minimum electrical conductivity
  ・Can be re-polished.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	8 ～ 38	-	6 ～ 25	4	57 ～ 104	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-	Groove	-	-	Square

  From: ₹ 2,089.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

  MISUMI

  [Features]
  ·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
  ·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	7 ～ 26	-	6 ～ 20	4	54 ～ 92	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-	Groove	-	-	Square

  From: ₹ 1,862.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HGGCNXS HG Coated Carbide NX Short Blade

  SANKO MFG

  Chip discharge is excellent and high speed machining is possible. A short blade which has adopted a new standard considering usability of the blade length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	13 ～ 38	-	6 ～ 20	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	For General Steels (AlCrN, etc.)	With Lead	High Helical

  From: ₹ 3,528.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HGGCNX HG Coated Carbide NX

  SANKO MFG

  [Features]
  · Newly developed coating and new shape achieve a long life.
  · Excellent chip discharge.
  · Capable of high-speed machining.
  · A new standard considering usability of the blade length is adopted.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 62	-	3 ～ 25	3 ～ 4	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	For General Steels (AlCrN, etc.)	With Lead	High Helical

  From: ₹ 4,496.69
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCXF SA Coated Carbide for GCX Groove

  SANKO MFG

  An end mill with excellent rigidity which makes it ideal for groove machining. Side processing is also possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	3 ～ 4	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	TiAlN	With Lead	High Helical

  From: ₹ 6,011.55
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCXLS SA Coated Carbide 6-Flute Long Shank

  SANKO MFG

  Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. The long shank allows for machining in deep sections.
  
  [Features]
  · SAGCX long blade, long shank end mill.
  · Deep sections can be machined

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 30	12 ～ 55	-	6 ～ 25	6	80 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	TiAlN	With Lead	High Helical

  From: ₹ 9,306.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[◎] / Copper[◎]	Powerful Torsion (45°-60°)	Groove	DLC	Sharp Edge	High Helical

  From: ₹ 5,442.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  A long shank type, it also features neck relief, enabling deep engraving operation.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	15 ～ 80	6 ～ 20	3	70 ～ 800	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	High Helical

  From: ₹ 4,713.67
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  Long high helical endmill for aluminum, 3-flute, pure DLC coating

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	15 ～ 80	6 ～ 20	3	70 ～ 800	Aluminum[◎] / Copper[◎]	Powerful Torsion (45°-60°)	Groove	DLC	Sharp Edge	High Helical

  From: ₹ 8,355.49
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE3 High-Helix End Mill, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  3-flute type with high-torsion grooves enables everything from rough machining to finishing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	High Helical

  From: ₹ 3,058.18
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	4	45 ～ 105	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	Powerful Torsion (45°-60°)	Groove	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  From: ₹ 3,322.05
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

  OKAZAKI SEIKO

  A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	TiAlN	Sharp Edge	High Helical

  From: ₹ 2,329.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute Super One-Cut End Mill DV-SOCS3

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	3	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	-	Sharp Edge	Square

  From: ₹ 3,907.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	16 ～ 60	-	6 ～ 20	2	60 ～ 130	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	Square

  From: ₹ 6,860.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.4 ～ 30	0.8 ～ 65	-	3 ～ 32	2	40 ～ 140	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	Square

  From: ₹ 3,121.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	5 ～ 38	-	6 ～ 25	3	55 ～ 130	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	Square

  From: ₹ 4,271.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 22	9 ～ 33	-	4 ～ 20	3	80 ～ 200	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Micro R	Square

  From: ₹ 5,546.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 25	4.5 ～ 85	-	3 ～ 25	2	45 ～ 160	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Groove	Non-Coated	Sharp Edge	Square

  From: ₹ 6,225.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	4	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	TiAlN	Sharp Edge	Square

  From: ₹ 4,826.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid end mill SEM4 type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 12	6.5 ～ 25	-	4 ～ 12	4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Standard torsion (30-40°)	Groove	TiAlN	Sharp Edge	Square

  From: ₹ 1,176.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill KSVA-2

  KYOWA SEIKO

  [Features]
  A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
  The high cutting speed and high production efficiency lead to overall production cost reduction.
  [Applications]
  V-grooving, chamfering, side milling, etc. can be performed with this product alone.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	2 ～ 12	-	4 ～ 6	2	45 ～ 60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Standard torsion (30-40°)	Groove	TiAlN	-	-

  From: ₹ 6,735.78
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver

  GUHRING

  [Features]
  · A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.
  · Furthermore, all of these processes can be done at high speed and high feed rate.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 20	11 ～ 38	18 ～ 52	6 ～ 20	-	57 ～ 104	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Variable lead	Groove	-	Micro R	Square

  From: ₹ 4,896.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA

  OKAZAKI SEIKO

  [Features]
  · Carbide end mills for plunge milling that enable non-step plunge cut feed, and further fluting as is.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  18	-	-	-	-	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Powerful Torsion (45°-60°)	Groove	TiAlN	-	High Helical

  From: ₹ 5,573.56
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	7 LEADERS	MISUMI	KYOWA SEIKO	MISUMI	MISUMI	SANKO MFG	OKAZAKI SEIKO	DIJET	KYOWA SEIKO	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	KYOWA SEIKO	GUHRING	OKAZAKI SEIKO
Product Series	Carbide 6-Flute End Mill for High Hardness 45°, E167TX	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	Carbide Center V End Mill KSV-2	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	SAGCX SA Coated 6-Flute Carbide End Mill	SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type	Carbide Center V End Mill (with Rounded Tip) KSVRA-2	Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	HGGCNXS HG Coated Carbide NX Short Blade	HGGCNX HG Coated Carbide NX	SAGCXF SA Coated Carbide for GCX Groove	SAGCXLS SA Coated Carbide 6-Flute Long Shank	SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	3-Flute Super One-Cut End Mill DV-SOCS3	Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type	Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type	Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type	Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)	Solid end mill SEM4 type	Carbide Center V End Mill KSVA-2	High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver	Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA
From	₹ 6,213.42	₹ 4,039.16	₹ 5,116.45	₹ 1,351.00	₹ 4,339.18	₹ 6,077.18	₹ 3,389.02	₹ 4,826.18	₹ 8,213.13	₹ 3,123.44						₹ 5,560.71		₹ 4,595.31	₹ 2,125.22	₹ 2,089.00	₹ 1,862.64	₹ 3,528.31	₹ 4,496.69	₹ 6,011.55	₹ 9,306.45	₹ 5,442.31	₹ 4,713.67	₹ 8,355.49	₹ 3,058.18	₹ 3,322.05	₹ 2,329.56	₹ 3,907.36	₹ 6,860.73	₹ 3,121.15	₹ 4,271.67	₹ 5,546.78	₹ 6,225.85	₹ 4,826.18	₹ 1,176.35	₹ 6,735.78	₹ 4,896.80	₹ 5,573.56
Days to Ship	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	9 Day(s) or more
Specifications		TS SUS 3 Flutes S (Short)		XAL General Steel 3 Flutes	TS General Steel 3 Flutes S (Short)						TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS SUS 3 Flutes R (Regular)	DLC Aluminum 3 Flutes S (Short)	DLC Aluminum 3 Flutes B (Stub)
Blade diameter (D)(φ)	6 ～ 20	3 ～ 16	0.5 ～ 6	1 ～ 12	2 ～ 20	3 ～ 32	3 ～ 20	3 ～ 22	1 ～ 6	3 ～ 20	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	3 ～ 12	1 ～ 12	5 ～ 22	2 ～ 20	3 ～ 25	3 ～ 20	5 ～ 20	3 ～ 25	3 ～ 25	6 ～ 30	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	0.4 ～ 30	3 ～ 25	6 ～ 22	1 ～ 25	3 ～ 20	2 ～ 12	1 ～ 6	4 ～ 20	18
Blade length (ℓ)(mm)	26 ～ 76	7 ～ 35	1 ～ 12	1.5 ～ 26	3.5 ～ 30	10 ～ 65	10 ～ 45	5 ～ 33	2 ～ 12	8 ～ 38	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	10.5 ～ 38	2 ～ 24	9 ～ 33	6 ～ 45	8 ～ 38	7 ～ 26	13 ～ 38	10 ～ 62	10 ～ 50	12 ～ 55	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	8 ～ 38	16 ～ 60	0.8 ～ 65	5 ～ 38	9 ～ 33	4.5 ～ 85	8 ～ 38	6.5 ～ 25	2 ～ 12	11 ～ 38	-
Underneck length (ℓ1)(mm)	-	-	-	-	30 ～ 140	-	-	-	-	-	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	-	17 ～ 50	-	-	-	-	-	-	-	-	-	15 ～ 80	15 ～ 80	-	-	-	-	-	-	-	-	-	-	-	-	18 ～ 52	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 16	3 ～ 6	4 ～ 12	6 ～ 20	6 ～ 32	6 ～ 20	4 ～ 20	4 ～ 6	6 ～ 20	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	3 ～ 25	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	3 ～ 32	6 ～ 25	4 ～ 20	3 ～ 25	6 ～ 20	4 ～ 12	4 ～ 6	6 ～ 20	-
Number of flutes(sheet)	6	3	2	3	3	6	3	3	2	4 ～ 6	3	3	3	3	3	3	3	3	4	4	4	4	3 ～ 4	3 ～ 4	6	3	3	3	3	4	3	3	2	2	3	3	2	4	4	2	-	-
Overall Length (L)(mm)	80 ～ 160	60 ～ 105	40 ～ 60	45 ～ 100	80 ～ 200	50 ～ 160	45 ～ 105	70 ～ 200	50 ～ 60	50 ～ 100	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 100	40 ～ 80	80 ～ 200	50 ～ 100	57 ～ 104	54 ～ 92	50 ～ 110	50 ～ 140	50 ～ 140	80 ～ 200	45 ～ 105	70 ～ 800	70 ～ 800	45 ～ 105	45 ～ 105	45 ～ 105	60 ～ 125	60 ～ 130	40 ～ 140	55 ～ 130	80 ～ 200	45 ～ 160	60 ～ 125	40 ～ 75	45 ～ 60	57 ～ 104	-
work material	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Variable lead	Powerful Torsion (45°-60°)
Machining Application	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove
Coating	-	For High Hardness (Silicon Group)	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	TiAlN	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	DLC	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	DLC	Non-Coated	DLC	Non-Coated	For High Hardness (Silicon Group)	TiAlN	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	-	TiAlN
Blade tip shape	With Lead	C plane	-	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	-	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	C plane	With Lead	Micro R	-	-	-	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Micro R	Sharp Edge	Sharp Edge	Sharp Edge	-	Micro R	-
Type	High Helical	Square	-	Square	Square	High Helical	High Helical	Square	-	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	-	Square	High Helical

Loading...