Multi-Function Square End Mills (Carbide)（Machining Application：Side）

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

  MISUMI

  Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	7 ～ 35	-	6 ～ 16	3	60 ～ 105	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	C plane	Square

  From: ₹ 4,039.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver

  GUHRING

  [Features]
  · A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.
  · Furthermore, all of these processes can be done at high speed and high feed rate.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 20	11 ～ 38	18 ～ 52	6 ～ 20	-	57 ～ 104	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Variable lead	Side	-	Micro R	Square

  From: ₹ 4,896.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 6-Flute End Mill for High Hardness 45°, E167TX

  7 LEADERS

  [Features]
  ·High-performance 6-flute 45° helix angle long end mill for processing high-hardness materials using UMG carbide material as the base material
  ·Highly efficient machining is possible by side cutting of high hardness material (Up to HRC70)
  ·Multi-layer coating of nanoparticles
  ·Due to high film hardness and oxidation resistance onset temperature, it is suitable for processing high hardness materials from HRC45 to 70
  ·Suitable for a wide range of work materials from general steel to high hardness steel

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	26 ～ 76	-	6 ～ 20	6	80 ～ 160	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	Powerful Torsion (45°-60°)	Side	-	With Lead	High Helical

  From: ₹ 6,213.42
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 38	-	4 ～ 20	4	45 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Powerful Torsion (45°-60°)	Side	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,256.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  
  ·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.
  ·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 22	3.5 ～ 30	30 ～ 140	6 ～ 20	4	80 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  From: ₹ 3,584.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  10 ～ 12	15 ～ 18	-	9 ～ 11	4	150 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[◎] / Titanium[○]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	Square

  From: ₹ 12,251.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill KSV-2

  KYOWA SEIKO

  Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	1 ～ 12	-	3 ～ 6	2	40 ～ 70	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Standard torsion (30-40°)	Side	Non-Coated	-	-

  From: ₹ 5,116.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill KSVA-2

  KYOWA SEIKO

  [Features]
  A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.
  The high cutting speed and high production efficiency lead to overall production cost reduction.
  [Applications]
  V-grooving, chamfering, side milling, etc. can be performed with this product alone.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	2 ～ 12	-	4 ～ 6	2	45 ～ 60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Standard torsion (30-40°)	Side	TiAlN	-	-

  From: ₹ 6,735.78
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 26	-	4 ～ 12	3	45 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Powerful Torsion (45°-60°)	Side	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,351.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	3.5 ～ 30	30 ～ 140	6 ～ 20	3	80 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 4,339.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Square End Mill

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Suppresses chattering with unequal lead and unequal flutes
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Stable machining is possible while maintaining finished surface accuracy
  ·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	6 ～ 45	-	6 ～ 20	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	Side	-	-	Square

  From: ₹ 2,125.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	High Helical

  From: ₹ 3,389.02
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	High Helical

  From: ₹ 6,302.20
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 19	4.5 ～ 75	-	3 ～ 20	2	45 ～ 150	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	Square

  From: ₹ 7,148.69
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX

  7 LEADERS

  [Features]
  · High performance 4/6-flute 45° torsion end mill for machining high hardness materials with UMG carbide substrate.
  · Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
  · Nanoparticle Multilayer Coating
  · Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
  · Suitable for a wide range of work materials from general steel to high hardness steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	4 ～ 6	50 ～ 100	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	Powerful Torsion (45°-60°)	Side	-	With Lead	High Helical

  From: ₹ 3,123.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	14 ～ 68	6 ～ 12	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 73	4 ～ 20	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	3	60 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 16	1.5 ～ 24	14 ～ 74	6 ～ 16	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 72	4 ～ 20	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	4	60 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

  MISUMI

  Ideal for the standing-wall finish of stainless steel

  • TS
  • SUS
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	10.5 ～ 38	-	6 ～ 12	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	C plane	Square

  From: ₹ 5,560.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

  MISUMI

  3-flute structure that's excellent in discharging chips

  • DLC
  • Aluminum
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	17 ～ 50	4 ～ 12	3	40 ～ 80	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Side	DLC	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

  MISUMI

  Given the rounded edge on the blade rear end, it suppresses machining streaks

  • DLC
  • Aluminum
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 22	9 ～ 33	-	4 ～ 20	3	80 ～ 200	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Side	DLC	Micro R	Square

  From: ₹ 4,595.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

  MISUMI

  MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 26	-	6 ～ 12	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 2,512.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

  MISUMI

  Introducing a regular type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 48	-	4 ～ 12	4	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Powerful Torsion (45°-60°)	Side	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,284.84
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

  MISUMI

  Introducing a long type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	5 ～ 60	-	4 ～ 12	4	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Powerful Torsion (45°-60°)	Side	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,565.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

  MISUMI

  [Features]
  ・Adopts unequal leads to suppress chatter and achieve high efficiency machining
  ・Optimum groove shape realizes smooth chip discharge
  ・Minimum electrical conductivity
  ・Can be re-polished.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	8 ～ 38	-	6 ～ 25	4	57 ～ 104	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-	Side	-	-	Square

  From: ₹ 2,089.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

  MISUMI

  [Features]
  ·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
  ·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	7 ～ 26	-	6 ～ 20	4	54 ～ 92	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-	Side	-	-	Square

  From: ₹ 1,862.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[◎] / Copper[◎]	Powerful Torsion (45°-60°)	Side	DLC	Sharp Edge	High Helical

  From: ₹ 5,442.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  A long shank type, it also features neck relief, enabling deep engraving operation.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	15 ～ 80	6 ～ 20	3	70 ～ 800	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	High Helical

  From: ₹ 4,713.67
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  Long high helical endmill for aluminum, 3-flute, pure DLC coating

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	15 ～ 80	6 ～ 20	3	70 ～ 800	Aluminum[◎] / Copper[◎]	Powerful Torsion (45°-60°)	Side	DLC	Sharp Edge	High Helical

  From: ₹ 8,355.49
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE3 High-Helix End Mill, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  3-flute type with high-torsion grooves enables everything from rough machining to finishing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	High Helical

  From: ₹ 3,058.18
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4 High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	High Helical

  From: ₹ 3,058.18
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	4	45 ～ 105	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	Powerful Torsion (45°-60°)	Side	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  From: ₹ 3,322.05
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	High Helical

  From: ₹ 4,713.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  [Features]
  A slim shank high helical end mill made of cemented carbide, 4 flutes.
  It is resistant to chipping and can be used in a wide range of applications, from general steel to stainless steel.
  The slim shank design allows for flexible adjustment of the protrusion length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 22	8 ～ 32	-	4 ～ 20	4	70 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	High Helical

  From: ₹ 4,977.55
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The reverse step design eliminates shank interference when performing mold pocket processing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 22	12 ～ 32	-	6 ～ 20	4	80 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	High Helical

  From: ₹ 8,686.33
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

  OKAZAKI SEIKO

  A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	High Helical

  From: ₹ 2,329.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

  OKAZAKI SEIKO

  It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	High Helical

  From: ₹ 2,329.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute Super One-Cut End Mill DV-SOCS3

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  16 ～ 20	32 ～ 38	-	16 ～ 20	3	110 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Powerful Torsion (45°-60°)	Side	-	Sharp Edge	Square

  From: ₹ 25,067.11
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	GUHRING	7 LEADERS	MISUMI	MISUMI	MISUMI	DIJET	KYOWA SEIKO	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET
Product Series	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver	Carbide 6-Flute End Mill for High Hardness 45°, E167TX	XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)	Carbide Center V End Mill KSV-2	Carbide Center V End Mill KSVA-2	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated	Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type	Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4 High-Helix End Mill, 4-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated	SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated	SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated	3-Flute Super One-Cut End Mill DV-SOCS3
From	₹ 4,039.16	₹ 4,896.80	₹ 6,213.42	₹ 1,256.71		₹ 3,584.00	₹ 12,251.78	₹ 5,116.45	₹ 6,735.78	₹ 1,351.00	₹ 4,339.18	₹ 2,125.22	₹ 3,389.02	₹ 6,302.20	₹ 7,148.69	₹ 3,123.44										₹ 5,560.71		₹ 4,595.31	₹ 2,512.00	₹ 1,284.84	₹ 1,565.15	₹ 2,089.00	₹ 1,862.64	₹ 5,442.31	₹ 4,713.67	₹ 8,355.49	₹ 3,058.18	₹ 3,058.18	₹ 3,322.05	₹ 4,713.67	₹ 4,977.55	₹ 8,686.33	₹ 2,329.56	₹ 2,329.56	₹ 25,067.11
Days to Ship	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more
Specifications	TS SUS 3 Flutes S (Short)			XAL General Steel 4 Flutes	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)				XAL General Steel 3 Flutes	TS General Steel 3 Flutes S (Short)						TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes L (Long)	TS SUS 3 Flutes R (Regular)	DLC Aluminum 3 Flutes S (Short)	DLC Aluminum 3 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	3 ～ 16	4 ～ 20	6 ～ 20	2 ～ 20	1 ～ 20	2 ～ 22	10 ～ 12	0.5 ～ 6	1 ～ 6	1 ～ 12	2 ～ 20	2 ～ 20	3 ～ 20	3 ～ 20	1 ～ 19	3 ～ 20	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	3 ～ 16	2 ～ 20	3 ～ 12	1 ～ 12	5 ～ 22	3 ～ 12	1 ～ 12	1 ～ 12	3 ～ 25	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 25	3 ～ 20	3 ～ 20	5 ～ 22	7 ～ 22	3 ～ 20	3 ～ 25	16 ～ 20
Blade length (ℓ)(mm)	7 ～ 35	11 ～ 38	26 ～ 76	5 ～ 38	4 ～ 56	3.5 ～ 30	15 ～ 18	1 ～ 12	2 ～ 12	1.5 ～ 26	3.5 ～ 30	6 ～ 45	10 ～ 45	15 ～ 80	4.5 ～ 75	8 ～ 38	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	1.5 ～ 24	3 ～ 38	5 ～ 40	5 ～ 75	10.5 ～ 38	2 ～ 24	9 ～ 33	8 ～ 26	4 ～ 48	5 ～ 60	8 ～ 38	7 ～ 26	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 50	10 ～ 45	15 ～ 80	8 ～ 32	12 ～ 32	10 ～ 45	10 ～ 50	32 ～ 38
Underneck length (ℓ1)(mm)	-	18 ～ 52	-	-	26 ～ 92	30 ～ 140	-	-	-	-	30 ～ 140	-	-	-	-	-	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	14 ～ 74	18 ～ 72	22 ～ 78	30 ～ 112	-	17 ～ 50	-	-	-	-	-	-	-	15 ～ 80	15 ～ 80	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	6 ～ 16	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	9 ～ 11	3 ～ 6	4 ～ 6	4 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	3 ～ 20	6 ～ 20	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	16 ～ 20
Number of flutes(sheet)	3	-	6	4	4	4	4	2	2	3	3	4	3	4	2	4 ～ 6	3	3	3	3	3	4	4	4	4	3	3	3	4	4	4	4	4	3	3	3	3	4	4	4	4	4	3	4	3
Overall Length (L)(mm)	60 ～ 105	57 ～ 104	80 ～ 160	45 ～ 125	60 ～ 130	80 ～ 200	150 ～ 160	40 ～ 70	45 ～ 60	45 ～ 100	80 ～ 200	50 ～ 100	45 ～ 105	70 ～ 150	45 ～ 150	50 ～ 100	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 110	60 ～ 110	60 ～ 110	60 ～ 150	60 ～ 100	40 ～ 80	80 ～ 200	60 ～ 100	45 ～ 105	45 ～ 105	57 ～ 104	54 ～ 92	45 ～ 105	70 ～ 800	70 ～ 800	45 ～ 105	45 ～ 120	45 ～ 105	70 ～ 150	70 ～ 150	80 ～ 150	45 ～ 105	45 ～ 120	110 ～ 125
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Aluminum[◎] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Variable lead	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
Coating	For High Hardness (Silicon Group)	-	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	-	Non-Coated	TiAlN	Non-Coated	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	DLC	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	-	DLC	Non-Coated	DLC	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	-
Blade tip shape	C plane	Micro R	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge	-	-	With Lead	With Lead	-	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	C plane	With Lead	Micro R	With Lead	With Lead	With Lead	-	-	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge
Type	Square	Square	High Helical	Square	Square	Square	Square	-	-	Square	Square	Square	High Helical	High Helical	Square	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square

Loading...