Carbide Square End Mills（Blade tip shape：With Lead Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	0.5 ～ 12	-	4 ～ 12	2	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 848.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Suitable for high-speed machining with stub flute length that is 1.5 times the cutting diameter
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 20	0.75 ～ 30	-	4 ～ 20	2	40 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 860.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 2-flute / 2.5D Flute Length model

  MISUMI

  The lineup of fine intermediate flute length between short and regular is available only in Misumi

  • TS
  • General Steel
  • 2 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	1.25 ～ 30	20 ～ 55	4 ～ 12	2	45 ～ 85	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  2-flute regular size that can be used for a wide range of applications
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.2 ～ 20	0.6 ～ 60	23 ～ 92	3 ～ 20	2	40 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 2-flute / 3.5D Flute Length model

  MISUMI

  Lineups of fine intermediate flute length between regular and long are available only in MISUMI.

  • TS
  • General Steel
  • 2 Flutes
  • RL

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	1.75 ～ 42	26 ～ 65	4 ～ 12	2	45 ～ 95	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Flute length 4D type supports deep cavity milling
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 48	29 ～ 76	4 ～ 12	2	45 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 12	2 ～ 12	-	4 ～ 12	4	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 1,152.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Suitable for high-speed machining with stub flute with 1.5 times flute length
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 12	3 ～ 18	-	4 ～ 12	4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 1,425.62
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	2 ～ 40	15 ～ 73	4 ～ 20	4	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide square end mill, 4-flute / 2.5D Flute Length model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Flute length is 2.5 times the cutting diameter between short and regular flutes
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 16	2.5 ～ 40	20 ～ 73	4 ～ 16	4	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·General-purpose 4-flute end mill for a wide range of applications
  ·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 60	23 ～ 92	4 ～ 20	4	45 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide square end mill, 4-flute / 3D Flute Length (regular) model

  MISUMI

  The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

  • Non-Coated
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 60	23 ～ 92	4 ～ 20	4	45 ～ 130	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	Non-Coated	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Multi-function square long neck type with high feed capability and excellent durability
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	1.5 ～ 13	4 ～ 60	4 ～ 6	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Long-Neck Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model

  MISUMI

  Demonstrates the tremendous durability and finishing precision in aluminum machining

  • DIA
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	3 ～ 36	-	4 ～ 12	3	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	Dia Coat	With Lead	Square

  From: ₹ 7,568.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

  MISUMI

  3-flute structure that's excellent in discharging chips

  • DLC
  • Aluminum
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	17 ～ 50	4 ～ 12	3	40 ～ 80	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts / Countersinking	DLC	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

  MISUMI

  The unique tip pocket shape improves the discharging of chips

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 20	1.5 ～ 60	23 ～ 92	4 ～ 20	3	40 ～ 130	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts / Countersinking	DLC	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

  MISUMI

  A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	3 ～ 36	4 ～ 12	3	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	With Lead	Square

  From: ₹ 1,570.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

  MISUMI

  3-flute structure that's excellent in discharging chips

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	17 ～ 50	4 ～ 12	3	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts / Countersinking	Non-Coated	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

  MISUMI

  Stub flute length items that are ideal for grooving are available at incredibly low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 20	0.75 ～ 30	-	4 ～ 20	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 568.84
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model

  MISUMI

  The Misumi's unique lineup of fine flute length is available at attractive low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2.5 ～ 30	-	4 ～ 12	2	45 ～ 85	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Countersinking	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 606.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model

  MISUMI

  A long flute length type that supports deep engraving

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	2 ～ 48	-	4 ～ 12	2	45 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 758.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model

  MISUMI

  The Misumi's original fine intermediate flute length is available at a reasonable price

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1.5 ～ 16	3.75 ～ 40	-	4 ～ 16	4	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 654.95
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

  MISUMI

  MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 26	-	6 ～ 12	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 2,512.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

  MISUMI

  Introducing a regular type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 48	-	4 ～ 12	4	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,284.84
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

  MISUMI

  Introducing a long type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	5 ～ 60	-	4 ～ 12	4	45 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,565.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Uneven Lead 4-Flute Square End Mill

  MISUMI

  The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 25	4 ～ 50	-	6 ～ 25	4	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Variable lead	Plane / Side / Groove	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 2,648.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard GSH

  NACHI(FUJIKOSHI)

  The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6	13	-	6	6	50	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Powerful Torsion (45°-60°)	Plane / Side	TiAlN	With Lead	Square

  From: ₹ 5,661.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 4	5 ～ 10	-	4 ～ 6	2	40 ～ 45	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,933.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1.5 ～ 14	3.8 ～ 35	-	4 ～ 16	4	40 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 2,388.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 4-Flute Blade 3D GSX4C-3D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through dry processing of high hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2.5 ～ 16	7.5 ～ 48	-	4 ～ 16	4	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Square

  From: ₹ 2,389.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL VL Ti/ SUS 2.5D GSXVL4T-2.5D

  NACHI(FUJIKOSHI)

  The variable split, variable lead, and sharp cutting edge suppress chatter and make it suitable for heat-resistant alloys.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 18	17.5 ～ 45	-	8 ～ 20	4	60 ～ 100	Stainless Steel[◎] / Titanium[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 11,623.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Long Shank 4GEOLS

  NACHI(FUJIKOSHI)

  High precision machining is possible even for deep engraving.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6	9	24	6	4	60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Square

  From: ₹ 6,567.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1.5 ～ 5	2.3 ～ 7.5	-	4 ～ 6	4	40 ～ 50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 2,684.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill for Aluminum 2DLCM

  NACHI(FUJIKOSHI)

  [Features]
  · End mill for aluminum and copper alloys.
  · Dry machining of aluminum is possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1.1 ～ 11.9	3 ～ 26	-	4 ～ 12	2	40 ～ 75	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	DLC	With Lead	Square

  From: ₹ 3,271.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 2-Flute Blade 3D GSX2C-3D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through dry processing of high hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 12	18 ～ 36	-	6 ～ 12	2	50 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 2,320.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 2-Flute Blade 4D GSX2C-4D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through dry processing of high hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6	24	-	6	2	60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 3,759.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 4-Flute Blade 4D GSX4C-4D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through dry processing of high hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1	4	-	4	4	40	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Square

  From: ₹ 4,630.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill Slot Long Shank DLCSLTLS

  NACHI(FUJIKOSHI)

  Capable of continuous high-efficiency machining of aluminum alloys from hole drilling to groove cutting. Suitable for deep engraving work.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 10	3 ～ 15	8 ～ 42	4 ～ 10	3	50 ～ 100	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	DLC	With Lead	Square

  From: ₹ 4,875.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 3-Flute Blade 2D GSX3C-2D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 8	7.5 ～ 19	-	6 ～ 8	3	45 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 2,338.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Slot 1.5D GSXSLT-1.5D

  NACHI(FUJIKOSHI)

  Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 5	6 ～ 7.5	-	6	3	45 ～ 50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 3,773.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Roughing 2.5D GSXRE-2.5D

  NACHI(FUJIKOSHI)

  Improved fracture resistance when used at high speeds for high efficiency. The GSX coating further improves heat resistance and abrasion resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  10 ～ 12	25 ～ 30	-	10 ～ 12	4	70 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Roughing

  From: ₹ 10,547.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL 2-Flute Blade 1.5D GSX2C-1.5D

  NACHI(FUJIKOSHI)

  Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	1.5 ～ 30	-	4 ～ 20	2	40 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,731.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL

  OSG

  General purpose type 2-flute ultra-long blade end mill with FX coating for excellent heat resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3	20	-	6	2	60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN	With Lead	Square

  From: ₹ 7,207.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS

  OSG

  End mill featuring an original ultra-smooth new DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	1 ～ 24	-	4 ～ 12	2	40 ～ 75	Aluminum[◎] / Copper[○] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	DLC	With Lead	Square

  From: ₹ 5,332.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6

  OSG

  End mill for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.2 ～ 1.8	0.3 ～ 2.7	1.5 ～ 4.5	6	2	50	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiAlN	With Lead	Square

  From: ₹ 6,091.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG
Product Series	TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model	TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model	TSC series carbide square end mill, 2-flute / 2.5D Flute Length model	TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model	TSC series carbide square end mill, 2-flute / 3.5D Flute Length model	TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model	TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model	TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model	TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model	TSC series carbide square end mill, 4-flute / 2.5D Flute Length model	TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model	Carbide square end mill, 4-flute / 3D Flute Length (regular) model	TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model	Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model	XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model	XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model	XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	TSC Series Carbide Uneven Lead 4-Flute Square End Mill	GS MILL Hard GSH	GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D	GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D	GSX MILL 4-Flute Blade 3D GSX4C-3D	GSX MILL VL Ti/ SUS 2.5D GSXVL4T-2.5D	X's Mill Geo Long Shank 4GEOLS	GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D	DLC Mill for Aluminum 2DLCM	GSX MILL 2-Flute Blade 3D GSX2C-3D	GSX MILL 2-Flute Blade 4D GSX2C-4D	GSX MILL 4-Flute Blade 4D GSX4C-4D	DLC Mill Slot Long Shank DLCSLTLS	GSX MILL 3-Flute Blade 2D GSX3C-2D	GSX MILL Slot 1.5D GSXSLT-1.5D	GSX MILL Roughing 2.5D GSXRE-2.5D	GSX MILL 2-Flute Blade 1.5D GSX2C-1.5D	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL	Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6
From	₹ 848.00	₹ 860.25					₹ 1,152.00	₹ 1,425.62						₹ 7,568.00			₹ 1,570.40		₹ 568.84	₹ 606.73	₹ 758.45	₹ 654.95	₹ 2,512.00	₹ 1,284.84	₹ 1,565.15	₹ 2,648.31	₹ 5,661.16	₹ 1,933.16	₹ 2,388.25	₹ 2,389.02	₹ 11,623.02	₹ 6,567.47	₹ 2,684.56	₹ 3,271.91	₹ 2,320.71	₹ 3,759.76	₹ 4,630.71	₹ 4,875.82	₹ 2,338.71	₹ 3,773.20	₹ 10,547.20	₹ 1,731.60	₹ 7,207.64	₹ 5,332.47	₹ 6,091.91
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes SR	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes RL	TS General Steel 2 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes R (Regular)	Non-Coated General Steel 4 Flutes R (Regular)	TS General Steel 3 Flutes	DIA Aluminum 3 Flutes R (Regular)	DLC Aluminum 3 Flutes S (Short)	DLC Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes B (Stub)	Non-Coated Aluminum 3 Flutes S (Short)	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	0.5 ～ 12	0.5 ～ 20	0.5 ～ 12	0.2 ～ 20	0.5 ～ 12	1 ～ 12	2 ～ 12	2 ～ 12	1 ～ 20	1 ～ 16	1 ～ 20	2 ～ 20	1 ～ 6	1 ～ 12	1 ～ 12	0.5 ～ 20	1 ～ 12	1 ～ 12	0.5 ～ 20	1 ～ 12	0.5 ～ 12	1.5 ～ 16	3 ～ 12	1 ～ 12	1 ～ 12	2 ～ 25	6	2 ～ 4	1.5 ～ 14	2.5 ～ 16	7 ～ 18	6	1.5 ～ 5	1.1 ～ 11.9	6 ～ 12	6	1	2 ～ 10	3 ～ 8	4 ～ 5	10 ～ 12	1 ～ 20	3	0.5 ～ 12	0.2 ～ 1.8
Blade length (ℓ)(mm)	0.5 ～ 12	0.75 ～ 30	1.25 ～ 30	0.6 ～ 60	1.75 ～ 42	4 ～ 48	2 ～ 12	3 ～ 18	2 ～ 40	2.5 ～ 40	3 ～ 60	5 ～ 60	1.5 ～ 13	3 ～ 36	2 ～ 24	1.5 ～ 60	1.5 ～ 18	2 ～ 24	0.75 ～ 30	2.5 ～ 30	2 ～ 48	3.75 ～ 40	8 ～ 26	4 ～ 48	5 ～ 60	4 ～ 50	13	5 ～ 10	3.8 ～ 35	7.5 ～ 48	17.5 ～ 45	9	2.3 ～ 7.5	3 ～ 26	18 ～ 36	24	4	3 ～ 15	7.5 ～ 19	6 ～ 7.5	25 ～ 30	1.5 ～ 30	20	1 ～ 24	0.3 ～ 2.7
Underneck length (ℓ1)(mm)	-	-	20 ～ 55	23 ～ 92	26 ～ 65	29 ～ 76	-	-	15 ～ 73	20 ～ 73	23 ～ 92	23 ～ 92	4 ～ 60	-	17 ～ 50	23 ～ 92	3 ～ 36	17 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	24	-	-	-	-	-	8 ～ 42	-	-	-	-	-	-	1.5 ～ 4.5
Shank diameter (d)(mm)	4 ～ 12	4 ～ 20	4 ～ 12	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 16	4 ～ 20	4 ～ 20	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 16	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 25	6	4 ～ 6	4 ～ 16	4 ～ 16	8 ～ 20	6	4 ～ 6	4 ～ 12	6 ～ 12	6	4	4 ～ 10	6 ～ 8	6	10 ～ 12	4 ～ 20	6	4 ～ 12	6
Number of flutes(sheet)	2	2	2	2	2	2	4	4	4	4	4	4	3	3	3	3	3	3	2	2	2	4	4	4	4	4	6	2	4	4	4	4	4	2	2	2	4	3	3	3	4	2	2	2	2
Overall Length (L)(mm)	40 ～ 65	40 ～ 105	45 ～ 85	40 ～ 130	45 ～ 95	45 ～ 100	40 ～ 65	40 ～ 75	40 ～ 110	45 ～ 105	45 ～ 130	45 ～ 130	50 ～ 100	40 ～ 80	40 ～ 80	40 ～ 130	40 ～ 80	40 ～ 80	40 ～ 110	45 ～ 85	45 ～ 100	45 ～ 105	60 ～ 100	45 ～ 105	45 ～ 105	50 ～ 120	50	40 ～ 45	40 ～ 90	40 ～ 110	60 ～ 100	60	40 ～ 50	40 ～ 75	50 ～ 90	60	40	50 ～ 100	45 ～ 60	45 ～ 50	70 ～ 75	40 ～ 100	60	40 ～ 75	50
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Stainless Steel[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Variable lead	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	Dia Coat	DLC	DLC	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	DLC	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	DLC	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	DLC	TiAlN
Blade tip shape	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Long-Neck Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	Square

Loading...