(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
404 items
You can add up to 6 items per a category to the compare list.
CoroMill Plura HD, Carbide Solid End Mill (With square center-cut oil hole)
SANDVIK
[Features]
· Internal lubrication gives good chip discharge properties.
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
- | - | - | 6 ~ 25 | 4 | 57 ~ 121 | Quenched and tempered steel[○] | Standard torsion (30-40°) | - | - | - | Square |
From: ₹ 12,054.89 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]
·Designed with tool shape that increases rigid for machining high hardness steel
·Because it is designed with large rake angle, it can be used even on machines where cutting speed does not increase
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 25 | 13 ~ 44 | - | 6 ~ 25 | 6 ~ 8 | 57 ~ 104 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | TiAlN | With Lead | High Helical |
From: ₹ 2,464.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that produces high-quality finish supports a wide range of machining areas
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 12 | 0.6 ~ 36 | 23 ~ 55 | 3 ~ 12 | 2 | 40 ~ 85 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts / Countersinking | Non-Coated | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide roughing end mill, 45° spiral / fine pitch / long model
MISUMI
[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 25 ~ 65 | 30 ~ 112 | 6 ~ 20 | 3 ~ 4 | 100 ~ 150 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | C plane | Roughing |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HLS4000 HM Coated 4-Flute Long Neck Square
UNION TOOL
[Features]
· Unequal division
· θ1 > θ2: Variable split suppresses chatter vibration and tool damage
· θ1 + θ2 = 180°: Easy to measure the outer diameter. 180° counter blade design.
· Circumference back taper: Cutting resistance is reduced by using a back taper, and vertical wall cutting is also stable.
· Adopts the newly developed HARDMAX coating for high-hardness materials that realizes outstanding heat resistance and lubricity
· The 4-flute blade with improved chip discharge performance achieves top-level high feed and machining accuracy
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6 | 1 ~ 6 | 4 ~ 50 | 4 ~ 6 | 4 | 50 ~ 110 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Long-Neck Square |
From: ₹ 2,467.53 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Long Blade End Mill KSEL-2
KYOWA SEIKO
Carbide long flute length end mill, KSEL-2
·An end mill with 4 to 12 times flute length.
·Helix angle: Standard helix angle (30 to 44°)
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.3 ~ 60 | - | 3 ~ 6 | 2 | 40 ~ 100 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Non-Coated | - | Square |
From: ₹ 5,116.45 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 30 | 0.2 ~ 60 | - | 4 ~ 32 | 2 | 45 ~ 140 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: ₹ 1,098.65 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEE4 High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI SEIKO
An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 25 | 10 ~ 50 | - | 6 ~ 25 | 4 | 45 ~ 120 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane / Side / Countersinking | Non-Coated | Sharp Edge | High Helical |
From: ₹ 3,058.18 |
---|
Days to Ship: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
The expensive long flute type for high hardness is offered at an affordable price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 26 ~ 76 | - | 6 ~ 20 | 6 ~ 8 | 70 ~ 140 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side | TiAlN | With Lead | High Helical |
From: ₹ 2,480.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
Introducing a long type with 45° spiral in the popular XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 5 ~ 60 | - | 4 ~ 12 | 4 | 45 ~ 105 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: ₹ 1,565.15 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1.5 ~ 25 | 6 ~ 120 | - | 4 ~ 25 | 4 | 60 ~ 250 | Quenched and tempered steel[◎] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | - | Square |
From: ₹ 2,168.07 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS
OSG
General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 30 | 0.4 ~ 45 | - | 3 ~ 32 | 2 | 40 ~ 125 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | TiAlN | Sharp Edge | Square |
From: ₹ 6,232.55 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills 4 Flutes (Super Hard)_NEO-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 25 | 6 ~ 50 | - | 6 ~ 25 | 4 | 50 ~ 120 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: ₹ 5,657.95 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]
UNION TOOL
[Features]
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity, enabling deep rib milling of high-hardness materials
· High Accuracy: O.D. Tolerance: 0/-0.01 (D ≤ 0.15), 0/-0.015 (D ≥ 0.2)
· The refined shape improves the fracture resistance and the synergistic effect with HARDMAX coating ensures long product life
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.1 ~ 9 | 0.3 ~ 60 | 4 ~ 6 | 2 | 45 ~ 120 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Long-Neck Square |
From: ₹ 1,771.04 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.2 ~ 9 | 0.3 ~ 60 | 4 ~ 6 | 2 | 50 ~ 100 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
From: ₹ 690.53 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide High Helix End Mills Short_MG-EHS
OSG
[Notice] Alteration can be specified. Please select from "Standard / alteration classification" of the narrowing conditions.
50° helix angle
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 25 | 13 ~ 45 | - | 6 ~ 25 | 3 ~ 4 | 50 ~ 120 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Non-Coated | With Lead | Square |
From: ₹ 9,749.80 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 12 | 0.15 ~ 18 | 0.3 ~ 60 | 4 ~ 12 | 2 | 45 ~ 140 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
From: ₹ 1,544.67 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MHRH430 4-Flute Long Neck End Mill for High-Hardness
NS TOOL
Adopts premium Infinity coating to achieve longer life in machining of materials with high hardness. Also enhances machining accuracy.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6 | 0.8 ~ 9 | 4 ~ 50 | 4 ~ 6 | 4 | 50 ~ 110 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Long-Neck Square |
From: ₹ 3,292.56 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
NS TOOL
Infinity coating has been adopted for the original deep rib end mill. Neck relief type suitable for narrow deep processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.15 ~ 9 | 0.3 ~ 60 | 4 ~ 6 | 2 | 45 ~ 120 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Long-Neck Square |
From: ₹ 1,929.05 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SLE2 Long Shank Slotting End Mill G2
ASAHI TOOLS
φ3 to φ7 are tip brazing types. Uses a long shank to increase the versatility of the protruding length.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 30 | 8 ~ 21 | 15 ~ 41 | 10 ~ 32 | 2 | 100 ~ 220 | Quenched and tempered steel[○] | No torsion | Plane / Countersinking | Non-Coated | - | Square |
From: ₹ 10,049.82 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide End Mill for Rib KRE-2
KYOWA SEIKO
Lineup of blade diameters from φ0.2 to φ6 in 0.1 increments. Longer neck section for deep machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 6 | 0.3 ~ 9 | - | 4 ~ 6 | 2 | 40 ~ 120 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Non-Coated | Sharp Edge | Square |
From: ₹ 3,920.38 |
---|
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Feed End Mill, Without End Cutting Edge, R215.H4 (Hardness: 43 HRC Min. / 63 HRC Max.)
SANDVIK
High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura Carbide End Mill for High Feed Face Milling
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 11 ~ 45 | - | 6 ~ 20 | 4 | 30 ~ 150 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane | TiCN | - | Square |
From: ₹ 10,332.44 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Anti-Vibration Short Carbide End Mill_AE-VMS
OSG
[Features]
· DUARISE coating
· Offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking.
Smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance.
A flute form that achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and a reduction in burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 16 | 8 ~ 32 | - | 6 ~ 16 | 4 | 60 ~ 100 | Quenched and tempered steel[○] | Variable lead | Side / Groove / Inclined Cuts | - | - | Square |
From: ₹ 2,244.00 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST
THE CUT
[Features]
· Demonstrates excellent wear and heat resistance thanks to its special coating geared towards high hardness materials.
· Capable of machining a wide range of workpieces from alloy steel to high hardness steel (HRC55 or lower.)
· The 4 flutes and 45° torsion angle help reduce cutting resistance and provide a quality finished surface.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 45 | - | 4 ~ 20 | 4 | 50 ~ 100 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Side / Groove | TiAlN | - | High Helical |
From: ₹ 2,700.62 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.2 ~ 40 | - | 3 ~ 20 | 2 | 40 ~ 110 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: ₹ 583.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 4-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 60 | 23 ~ 92 | 4 ~ 20 | 4 | 45 ~ 130 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide roughing end mill, fine pitch / long model
MISUMI
[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 25 ~ 65 | 30 ~ 112 | 6 ~ 20 | 4 | 100 ~ 150 | Quenched and tempered steel[◎] | Weak torsion (15 to 25˚) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Micro R | Roughing |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 8 ~ 26 | - | 6 ~ 12 | 4 | 60 ~ 100 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Plunging (Z feed) / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Square |
From: ₹ 2,512.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML
OSG
General purpose type 4-flute ultra-long blade end mill with FX coating for excellent heat resistance.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 30 | 20 ~ 112 | - | 6 ~ 32 | 4 | 60 ~ 225 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Square |
From: ₹ 8,387.64 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 10 | 1.5 ~ 15 | 4 ~ 80 | 4 ~ 10 | 4 | 45 ~ 150 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Long-Neck Square |
From: ₹ 2,010.78 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
X Coated Lead 30 End Mill NX-30X
NS TOOL
Can shave hardened steel from HRC 50 to 70. The deflection accuracy is in microns
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6 | 2 ~ 12 | - | 4 ~ 6 | 2 | 40 ~ 50 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove | TiCN | With Lead | Square |
From: ₹ 3,076.93 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P
NS TOOL
Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is the same as the blade diameter and the torsion angle is 25°
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.1 ~ 6 | - | 4 ~ 6 | 2 | 45 ~ 50 | Quenched and tempered steel[◎] | Weak torsion (15 to 25˚) | Plane / Side / Groove | For High Hardness (Silicon Group) | Sharp Edge | Square |
From: ₹ 1,548.67 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Blade Square End Mill 2 Blades
ATOM
Abundant blade length variation that allows the optimal blade length to be selected. Ideal for resin modeling and non-ferrous component machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 3 | 5 ~ 30 | - | 4 | 2 | 40 ~ 70 | Quenched and tempered steel[○] | - | Plane / Side | Non-Coated | Sharp Edge | Square |
From: ₹ 5,303.96 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide 6-Flute End Mill for High Hardness 45°, E167TX
7 LEADERS
[Features]
·High-performance 6-flute 45° helix angle long end mill for processing high-hardness materials using UMG carbide material as the base material
·Highly efficient machining is possible by side cutting of high hardness material (Up to HRC70)
·Multi-layer coating of nanoparticles
·Due to high film hardness and oxidation resistance onset temperature, it is suitable for processing high hardness materials from HRC45 to 70
·Suitable for a wide range of work materials from general steel to high hardness steel
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 26 ~ 76 | - | 6 ~ 20 | 6 | 80 ~ 160 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Countersinking | - | With Lead | High Helical |
From: ₹ 6,213.42 |
---|
Days to Ship: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 60 | - | 4 ~ 20 | 4 | 45 ~ 130 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 3.5 ~ 30 | 30 ~ 140 | 6 ~ 20 | 3 | 80 ~ 200 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Square |
From: ₹ 4,339.18 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
The 2D flute length type with high versatility achieves high-precision processing including grooving
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 40 | 17 ~ 73 | 4 ~ 20 | 4 | 40 ~ 110 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | Non-Coated | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
MISUMI
[Features]
·Cutting edge runout accuracy within 5 µm (compared to the manufacturer measurements), back taper within 5 µm, and shank diameter tolerance h5 standards are used, making it ideal for side surface finishing that requires high precision using high-quality tools with little variation in quality
·Designed with blade shape that emphasizes sharpness with positive blade and cutting edge sharp corner suitable for raw material processing such as carbon steel
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 10 ~ 30 | - | 6 ~ 12 | 4 ~ 6 | 60 ~ 100 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge | High Helical |
From: ₹ 5,207.64 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide roughing end mill, fine pitch / regular model
MISUMI
[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 15 ~ 45 | 20 ~ 92 | 6 ~ 20 | 3 ~ 4 | 60 ~ 130 | Quenched and tempered steel[◎] | Weak torsion (15 to 25˚) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | Micro R | Roughing |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 4 ~ 80 | - | 6 ~ 20 | 2 | 60 ~ 200 | Quenched and tempered steel[◎] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | - | Square |
From: ₹ 2,012.71 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 7.5 ~ 50 | - | 6 ~ 20 | 4 | 45 ~ 100 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: ₹ 4,838.02 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS
OSG
General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 30 | 6 ~ 45 | - | 4 ~ 32 | 4 | 40 ~ 125 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: ₹ 8,671.58 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills 4 Flutes Short_MG-EMS
OSG
[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.
[Specifications]
·Blade diameters of 2 to 9.5 mm are sharp, and 10 to 25 mm are sharp.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 25 | 6 ~ 45 | - | 4 ~ 25 | 4 | 40 ~ 120 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | Non-Coated | Sharp Edge / With Lead | Square |
From: ₹ 6,925.02 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NS TOOL
The blade length is the same as the blade diameter and the torsion angle is 25°. Weak torsion angle minimizes workpiece deflection
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | 0.5 ~ 12 | - | 4 ~ 12 | 2 | 40 ~ 70 | Quenched and tempered steel[◎] | Weak torsion (15 to 25˚) | Plane / Side / Groove / Inclined Cuts | Non-Coated | With Lead | Square |
From: ₹ 2,817.07 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NS TOOL
The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | 1.5 ~ 36 | - | 4 ~ 12 | 2 | 40 ~ 85 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | Non-Coated | With Lead | Square |
From: ₹ 2,944.33 |
---|
Days to Ship: 5 Day(s) or more |
Brand |
---|
Product Series |
CAD |
From |
Days to Ship |
Specifications |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | SANDVIK | MISUMI | MISUMI | MISUMI | UNION TOOL | KYOWA SEIKO | OSG | OKAZAKI SEIKO | MISUMI | MISUMI | MISUMI | OSG | OSG | UNION TOOL | MISUMI | OSG | OSG | NS TOOL | NS TOOL | ASAHI TOOLS | KYOWA SEIKO | SANDVIK | OSG | THE CUT | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | NS TOOL | NS TOOL | ATOM | 7 LEADERS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | NS TOOL | NS TOOL |
Product Series | CoroMill Plura HD, Carbide Solid End Mill (With square center-cut oil hole) | Carbide square end mill, 2-flute / 3D Flute Length (regular) model | TSC series carbide roughing end mill, 45° spiral / fine pitch / long model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS | HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product] | (Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS | MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing) | High-Feed End Mill, Without End Cutting Edge, R215.H4 (Hardness: 43 HRC Min. / 63 HRC Max.) | Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST | (Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide roughing end mill, fine pitch / long model | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML | Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS | MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill MXH225P | (Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model | Carbide square end mill, 4-flute / 2D Flute Length (short) model | TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less) | TSC series carbide roughing end mill, fine pitch / regular model | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS | ||||||||||||||||||||
CAD | |||||||||||||||||||||||||||||||||||||||||||||
From | ₹ 12,054.89 | ₹ 2,464.00 | ₹ 2,467.53 | ₹ 5,116.45 | ₹ 1,098.65 | ₹ 3,058.18 | ₹ 2,480.00 | ₹ 1,565.15 | ₹ 2,168.07 | ₹ 6,232.55 | ₹ 5,657.95 | ₹ 1,771.04 | ₹ 690.53 | ₹ 9,749.80 | ₹ 1,544.67 | ₹ 3,292.56 | ₹ 1,929.05 | ₹ 10,049.82 | ₹ 3,920.38 | ₹ 10,332.44 | ₹ 2,244.00 | ₹ 2,700.62 | ₹ 583.00 | ₹ 2,512.00 | ₹ 8,387.64 | ₹ 2,010.78 | ₹ 3,076.93 | ₹ 1,548.67 | ₹ 5,303.96 | ₹ 6,213.42 | ₹ 4,339.18 | ₹ 5,207.64 | ₹ 2,012.71 | ₹ 4,838.02 | ₹ 8,671.58 | ₹ 6,925.02 | ₹ 2,817.07 | ₹ 2,944.33 | |||||||
Days to Ship | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
Specifications | |||||||||||||||||||||||||||||||||||||||||||||
Blade diameter (D)(φ) | - | 6 ~ 25 | 0.2 ~ 12 | 6 ~ 20 | 1 ~ 6 | 0.1 ~ 6 | 0.1 ~ 30 | 3 ~ 25 | 6 ~ 20 | 1 ~ 12 | 1.5 ~ 25 | 0.2 ~ 30 | 3 ~ 25 | 0.1 ~ 6 | 0.1 ~ 6 | 6 ~ 25 | 0.1 ~ 12 | 1 ~ 6 | 0.1 ~ 6 | 3 ~ 30 | 0.2 ~ 6 | 6 ~ 20 | 3 ~ 16 | 3 ~ 20 | 0.1 ~ 20 | 1 ~ 20 | 6 ~ 20 | 3 ~ 12 | 3 ~ 30 | 1 ~ 10 | 1 ~ 6 | 0.1 ~ 6 | 1 ~ 3 | 6 ~ 20 | 1 ~ 20 | 2 ~ 20 | 1 ~ 20 | 3 ~ 12 | 3 ~ 20 | 1 ~ 20 | 3 ~ 20 | 2 ~ 30 | 2 ~ 25 | 0.5 ~ 12 | 0.5 ~ 12 |
Blade length (ℓ)(mm) | - | 13 ~ 44 | 0.6 ~ 36 | 25 ~ 65 | 1 ~ 6 | 0.3 ~ 60 | 0.2 ~ 60 | 10 ~ 50 | 26 ~ 76 | 5 ~ 60 | 6 ~ 120 | 0.4 ~ 45 | 6 ~ 50 | 0.1 ~ 9 | 0.2 ~ 9 | 13 ~ 45 | 0.15 ~ 18 | 0.8 ~ 9 | 0.15 ~ 9 | 8 ~ 21 | 0.3 ~ 9 | 11 ~ 45 | 8 ~ 32 | 8 ~ 45 | 0.2 ~ 40 | 3 ~ 60 | 25 ~ 65 | 8 ~ 26 | 20 ~ 112 | 1.5 ~ 15 | 2 ~ 12 | 0.1 ~ 6 | 5 ~ 30 | 26 ~ 76 | 3 ~ 60 | 3.5 ~ 30 | 2 ~ 40 | 10 ~ 30 | 15 ~ 45 | 4 ~ 80 | 7.5 ~ 50 | 6 ~ 45 | 6 ~ 45 | 0.5 ~ 12 | 1.5 ~ 36 |
Underneck length (ℓ1)(mm) | - | - | 23 ~ 55 | 30 ~ 112 | 4 ~ 50 | - | - | - | - | - | - | - | - | 0.3 ~ 60 | 0.3 ~ 60 | - | 0.3 ~ 60 | 4 ~ 50 | 0.3 ~ 60 | 15 ~ 41 | - | - | - | - | - | 23 ~ 92 | 30 ~ 112 | - | - | 4 ~ 80 | - | - | - | - | - | 30 ~ 140 | 17 ~ 73 | - | 20 ~ 92 | - | - | - | - | - | - |
Shank diameter (d)(mm) | 6 ~ 25 | 6 ~ 25 | 3 ~ 12 | 6 ~ 20 | 4 ~ 6 | 3 ~ 6 | 4 ~ 32 | 6 ~ 25 | 6 ~ 20 | 4 ~ 12 | 4 ~ 25 | 3 ~ 32 | 6 ~ 25 | 4 ~ 6 | 4 ~ 6 | 6 ~ 25 | 4 ~ 12 | 4 ~ 6 | 4 ~ 6 | 10 ~ 32 | 4 ~ 6 | 6 ~ 20 | 6 ~ 16 | 4 ~ 20 | 3 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 12 | 6 ~ 32 | 4 ~ 10 | 4 ~ 6 | 4 ~ 6 | 4 | 6 ~ 20 | 4 ~ 20 | 6 ~ 20 | 4 ~ 20 | 6 ~ 12 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 32 | 4 ~ 25 | 4 ~ 12 | 4 ~ 12 |
Number of flutes(sheet) | 4 | 6 ~ 8 | 2 | 3 ~ 4 | 4 | 2 | 2 | 4 | 6 ~ 8 | 4 | 4 | 2 | 4 | 2 | 2 | 3 ~ 4 | 2 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 6 | 4 | 3 | 4 | 4 ~ 6 | 3 ~ 4 | 2 | 4 | 4 | 4 | 2 | 2 |
Overall Length (L)(mm) | 57 ~ 121 | 57 ~ 104 | 40 ~ 85 | 100 ~ 150 | 50 ~ 110 | 40 ~ 100 | 45 ~ 140 | 45 ~ 120 | 70 ~ 140 | 45 ~ 105 | 60 ~ 250 | 40 ~ 125 | 50 ~ 120 | 45 ~ 120 | 50 ~ 100 | 50 ~ 120 | 45 ~ 140 | 50 ~ 110 | 45 ~ 120 | 100 ~ 220 | 40 ~ 120 | 30 ~ 150 | 60 ~ 100 | 50 ~ 100 | 40 ~ 110 | 45 ~ 130 | 100 ~ 150 | 60 ~ 100 | 60 ~ 225 | 45 ~ 150 | 40 ~ 50 | 45 ~ 50 | 40 ~ 70 | 80 ~ 160 | 45 ~ 130 | 80 ~ 200 | 40 ~ 110 | 60 ~ 100 | 60 ~ 130 | 60 ~ 200 | 45 ~ 100 | 40 ~ 125 | 40 ~ 120 | 40 ~ 70 | 40 ~ 85 |
work material | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] |
Torsion Angle (θ) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | No torsion | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Variable lead | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) |
Machining Application | - | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Countersinking | Plane / Side | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane | Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side | Plane / Side / Groove / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
Coating | - | TiAlN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | For General Steels (AlCrN, etc.) | - | TiAlN | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | TiAlN | Non-Coated | Non-Coated | TiCN | - | TiAlN | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For General Steels (AlCrN, etc.) | TiCN | For High Hardness (Silicon Group) | Non-Coated | - | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | Non-Coated |
Blade tip shape | - | With Lead | Sharp Edge / With Lead | C plane | With Lead | - | Sharp Edge | Sharp Edge | With Lead | With Lead | - | Sharp Edge | With Lead | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | With Lead | With Lead | - | Sharp Edge | - | - | - | Sharp Edge / With Lead | Sharp Edge / With Lead | Micro R | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge | Micro R | - | With Lead | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead |
Type | Square | High Helical | Square | Roughing | Long-Neck Square | Square | Square | High Helical | High Helical | Square | Square | Square | Square | Long-Neck Square | Long-Neck Square | Square | Long-Neck Square | Long-Neck Square | Long-Neck Square | Square | Square | Square | Square | High Helical | Square | Square | Roughing | Square | Square | Long-Neck Square | Square | Square | Square | High Helical | Square | Square | Square | High Helical | Roughing | Square | Square | Square | Square | Square | Square |
Loading...
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy