(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
358 items
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
From: ₹ 583.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
From: ₹ 1,289.76 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
From: ₹ 2,978.58 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 4-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide roughing end mill, fine pitch / regular model
MISUMI
Strongly supports the cost reduction of roughing with the limited special price for standard sizes
From: ₹ 3,336.78 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills 4 Flutes Short_MG-EMS
OSG
[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.
[Specifications]
·Blade diameters of 2 to 9.5 mm are sharp, and 10 to 25 mm are sharp.
From: ₹ 6,925.02 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining
From: ₹ 5,984.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide End Mill for Rib for Resin Processing PRE-2
KYOWA SEIKO
Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.
From: ₹ 3,920.38 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Anti-Vibration Short Carbide End Mill_AE-VMS
OSG
[Features]
· DUARISE coating
· Offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking.
Smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance.
A flute form that achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and a reduction in burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.
From: ₹ 2,244.00 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
From: ₹ 662.02 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications
From: ₹ 3,434.56 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide End Mill for Rib KRE-2
KYOWA SEIKO
Lineup of blade diameters from φ0.2 to φ6 in 0.1 increments. Longer neck section for deep machining.
From: ₹ 3,920.38 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
From: ₹ 1,256.71 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
From: ₹ 690.53 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GS MILL Long Neck, 4-Flute GSN4
NACHI(FUJIKOSHI)
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
From: ₹ 3,415.22 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Regular Grain Carbide End Mills 2 Flutes Long for Graphite_GF-EDL
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.
From: ₹ 18,813.47 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
Achieves both high levels of machining precision and reduction of processing time in side milling
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model
MISUMI
Significantly reduces the roughing time of aluminum
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price
From: ₹ 8,656.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
From: ₹ 654.95 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide Roughing End Mill
MISUMI
[Features]
・High-speed rotation is possible by adopting a 45° helix.
・Using a fine pitch nick, the surface roughness after processing is also excellent.
・The conductivity is minimal.
《Additional machining》
・Additional neck relief machining can be specified using MISUMI standard tools.
・No need to create drawings. You can order by simply specifying the dimensions using the model number.
・Available starting from 1 piece, ``just the quantity you need when you need it.''
・Delivered on the 3rd day.
From: ₹ 3,128.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
From: ₹ 2,397.27 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.
From: ₹ 1,544.67 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HLS4000 HM Coated 4-Flute Long Neck Square
UNION TOOL
[Features]
· Unequal division
· θ1 > θ2: Variable split suppresses chatter vibration and tool damage
· θ1 + θ2 = 180°: Easy to measure the outer diameter. 180° counter blade design.
· Circumference back taper: Cutting resistance is reduced by using a back taper, and vertical wall cutting is also stable.
· Adopts the newly developed HARDMAX coating for high-hardness materials that realizes outstanding heat resistance and lubricity
· The 4-flute blade with improved chip discharge performance achieves top-level high feed and machining accuracy
From: ₹ 2,467.53 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Router for CFRP Fine Pitch with Nick_DIA-BNC
OSG
A router that adopts a diamond coating with excellent abrasion resistance.
From: ₹ 18,643.38 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill with 2 Carbide Solid Blades KSE-2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
From: ₹ 4,694.55 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Miniature End Mill KMSE‐2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
From: ₹ 4,553.91 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck square end mill, 2-flute / long neck model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide roughing end mill, fine pitch / regular model
MISUMI
[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide roughing end mill, 45° spiral / fine pitch / long model
MISUMI
[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model
MISUMI
[Features]
·Long neck shape prevents tool interference during deep cutting (body length can be selected according to machining).
·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
·CrN coating with excellent lubricity is ideal for copper electrode processing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
From: ₹ 2,447.44 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
From: ₹ 739.71 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 2-Flute Blade 2D GSX2C-2D
NACHI(FUJIKOSHI)
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]
· Blade Shape: With Lead
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting
From: ₹ 1,414.16 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
From: ₹ 4,838.02 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.
From: ₹ 1,098.65 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills DG Coated 4 Flutes Short_DG-EMS
OSG
End mill with diamond coating dedicated for graphite.
From: ₹ 20,306.91 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NS TOOL
The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing
From: ₹ 2,246.49 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC-AZS, DLC Coat, 3-Flute Long Neck Square [Alteration Supported Product]
UNION TOOL
[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· The DLC coating provides outstanding wear resistance and resistance to weld adhesion
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat land
· O.D. Tolerance: 0/-0.015 (D ≤ 6), 0/-0.005 (D ≥ 8)
From: ₹ 3,142.58 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Long Blade End Mill KSEL-2
KYOWA SEIKO
Carbide long flute length end mill, KSEL-2
·An end mill with 4 to 12 times flute length.
·Helix angle: Standard helix angle (30 to 44°)
From: ₹ 5,116.45 |
---|
Days to Ship: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
From: ₹ 597.73 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
From: ₹ 1,635.75 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 2-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: 6 Day(s) or more |
Brand |
---|
Product Series |
CAD |
From |
Days to Ship |
Specifications |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | MISUMI | MISUMI | NACHI(FUJIKOSHI) | MISUMI | MISUMI | OSG | MISUMI | KYOWA SEIKO | OSG | MISUMI | UNION TOOL | KYOWA SEIKO | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | UNION TOOL | OSG | KYOWA SEIKO | KYOWA SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | NS TOOL | UNION TOOL | KYOWA SEIKO | MISUMI | MISUMI | MISUMI |
Product Series | (Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | (Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model | XAC series carbide roughing end mill, fine pitch / regular model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model | (Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product] | TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model | (Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | Regular Grain Carbide End Mills 2 Flutes Long for Graphite_GF-EDL | Carbide square end mill, 4-flute / 4D Flute Length (long) model | Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model | (Economy series) XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS | (Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | Carbide square end mill, 2-flute / 2D Flute Length (short) model | TSC series carbide long neck square end mill, 2-flute / long neck model | TSC series carbide roughing end mill, fine pitch / regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / long model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model | (Economy series) XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | Micro Grain Carbide End Mills DG Coated 4 Flutes Short_DG-EMS | DLC-AZS, DLC Coat, 3-Flute Long Neck Square [Alteration Supported Product] | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model | ||||||||||||||||||
CAD | |||||||||||||||||||||||||||||||||||||||||||||
From | ₹ 583.00 | ₹ 1,289.76 | ₹ 2,978.58 | ₹ 3,336.78 | ₹ 6,925.02 | ₹ 5,984.00 | ₹ 3,920.38 | ₹ 2,244.00 | ₹ 662.02 | ₹ 3,434.56 | ₹ 3,920.38 | ₹ 1,256.71 | ₹ 690.53 | ₹ 3,415.22 | ₹ 18,813.47 | ₹ 8,656.00 | ₹ 654.95 | ₹ 3,128.00 | ₹ 2,397.27 | ₹ 1,544.67 | ₹ 2,467.53 | ₹ 18,643.38 | ₹ 4,694.55 | ₹ 4,553.91 | ₹ 2,447.44 | ₹ 739.71 | ₹ 1,414.16 | ₹ 4,838.02 | ₹ 1,098.65 | ₹ 20,306.91 | ₹ 2,246.49 | ₹ 3,142.58 | ₹ 5,116.45 | ₹ 597.73 | ₹ 1,635.75 | ||||||||||
Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Specifications | |||||||||||||||||||||||||||||||||||||||||||||
Blade diameter (D)(φ) | 0.1 ~ 20 | 1 ~ 12 | 1 ~ 20 | 1 ~ 12 | 6 ~ 20 | 2 ~ 25 | 1 ~ 12 | 0.3 ~ 5 | 3 ~ 16 | 1 ~ 20 | 1 ~ 5 | 0.2 ~ 6 | 2 ~ 20 | 1 ~ 20 | 0.1 ~ 6 | 1 ~ 10 | 2 ~ 12 | 1 ~ 12 | 5 ~ 20 | 1 ~ 12 | 1.5 ~ 16 | 3 ~ 12 | 1 ~ 20 | 0.1 ~ 12 | 1 ~ 6 | 4 ~ 12 | 3 ~ 6 | 0.1 ~ 3 | 1 ~ 20 | 0.2 ~ 12 | 0.1 ~ 6 | 3 ~ 20 | 6 ~ 20 | 0.5 ~ 3 | 0.5 ~ 12 | 1 ~ 20 | 3 ~ 20 | 0.1 ~ 30 | 4 ~ 12 | 0.5 ~ 12 | 1 ~ 12 | 0.1 ~ 6 | 0.1 ~ 20 | 3 ~ 12 | 0.1 ~ 20 |
Blade length (ℓ)(mm) | 0.2 ~ 40 | 4 ~ 48 | 4 ~ 80 | 4 ~ 48 | 16 ~ 38 | 6 ~ 45 | 3 ~ 36 | 0.6 ~ 10 | 8 ~ 32 | 2 ~ 40 | 2.5 ~ 25 | 0.3 ~ 9 | 5 ~ 38 | 2 ~ 40 | 0.2 ~ 9 | 1.5 ~ 15 | 20 ~ 130 | 4 ~ 48 | 15 ~ 45 | 5 ~ 60 | 3.75 ~ 40 | 8 ~ 30 | 2.5 ~ 38 | 0.15 ~ 18 | 1 ~ 6 | 12 ~ 36 | 10 ~ 15 | 0.2 ~ 8 | 3 ~ 60 | 0.4 ~ 24 | 0.2 ~ 10 | 15 ~ 45 | 25 ~ 65 | 0.7 ~ 4.5 | 2 ~ 48 | 2 ~ 40 | 7.5 ~ 50 | 0.2 ~ 60 | 8 ~ 24 | 1 ~ 24 | 2 ~ 24 | 0.3 ~ 60 | 0.3 ~ 60 | 12 ~ 30 | 0.2 ~ 40 |
Underneck length (ℓ1)(mm) | - | - | - | 29 ~ 70 | - | - | - | - | - | - | - | - | - | 15 ~ 73 | 0.3 ~ 60 | 4 ~ 80 | 25 ~ 80 | 29 ~ 70 | 20 ~ 70 | 10 ~ 85 | - | - | - | 0.3 ~ 60 | 4 ~ 50 | - | - | - | - | 17 ~ 45 | 0.3 ~ 60 | 20 ~ 92 | 30 ~ 112 | 2 ~ 40 | - | - | - | - | - | - | 3 ~ 36 | - | - | - | 17 ~ 73 |
Shank diameter (d)(mm) | 3 ~ 20 | 4 ~ 12 | 4 ~ 20 | 4 ~ 12 | 6 ~ 20 | 4 ~ 25 | 4 ~ 12 | 4 ~ 6 | 6 ~ 16 | 4 ~ 20 | 4 ~ 6 | 4 ~ 6 | 4 ~ 20 | 4 ~ 20 | 4 ~ 6 | 4 ~ 10 | 6 ~ 12 | 4 ~ 12 | 6 ~ 20 | 4 ~ 12 | 4 ~ 16 | 6 ~ 12 | 3 ~ 20 | 4 ~ 12 | 4 ~ 6 | 4 ~ 12 | 6 | 3 | 4 ~ 20 | 3 ~ 12 | 4 ~ 6 | 6 ~ 20 | 6 ~ 20 | 4 ~ 6 | 4 ~ 12 | 4 ~ 20 | 6 ~ 20 | 4 ~ 32 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 3 ~ 6 | 3 ~ 20 | 6 ~ 12 | 3 ~ 20 |
Number of flutes(sheet) | 2 | 4 | 4 | 4 | 3 ~ 4 | 4 | 2 | 2 | 4 | 4 | 3 ~ 4 | 2 | 4 | 4 | 2 | 4 | 2 | 4 | 3 | 2 | 4 | 3 ~ 4 | 4 | 2 | 4 | 6 ~ 14 | 2 | 2 | 4 | 2 | 2 | 3 ~ 4 | 3 ~ 4 | 2 | 2 | 2 | 4 | 2 | 4 | 2 | 3 | 2 | 2 | 4 | 2 |
Overall Length (L)(mm) | 40 ~ 110 | 45 ~ 100 | 40 ~ 140 | 45 ~ 100 | 57 ~ 104 | 40 ~ 120 | 40 ~ 80 | 45 ~ 100 | 60 ~ 100 | 40 ~ 110 | 45 ~ 70 | 40 ~ 120 | 45 ~ 125 | 40 ~ 110 | 50 ~ 100 | 50 ~ 150 | 100 ~ 200 | 45 ~ 100 | 57 ~ 100 | 75 ~ 200 | 45 ~ 105 | 50 ~ 80 | 38 ~ 100 | 45 ~ 140 | 50 ~ 110 | 62 ~ 94 | 50 | 40 | 45 ~ 130 | 35 ~ 75 | 40 ~ 100 | 60 ~ 130 | 100 ~ 150 | 50 ~ 100 | 45 ~ 100 | 40 ~ 100 | 45 ~ 100 | 45 ~ 140 | 80 ~ 120 | 40 ~ 75 | 60 ~ 110 | 40 ~ 100 | 40 ~ 110 | 50 ~ 90 | 35 ~ 110 |
work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Graphite[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[○] | Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Variable lead | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
Machining Application | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts |
Coating | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | TiAlN | Non-Coated | Dia Coat | Non-Coated | - | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | Non-Coated | Non-Coated | Dia Coat | For General Steels (AlCrN, etc.) | - | TiAlN | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Dia Coat | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | CrN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | DG | Non-Coated | DLC | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) |
Blade tip shape | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | C plane | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | - | Sharp Edge / With Lead | With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | Micro R | Sharp Edge | Sharp Edge / With Lead | - | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Micro R | C plane | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | - | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead |
Type | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Long-Neck Square | Square | Square | Roughing | Square | Square | Roughing | Square | Long-Neck Square | Long-Neck Square | Roughing | Square | Square | Square | Square | Long-Neck Square | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square |
Loading...
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy