Nylon Connectors（Applicable pin/contact：Male (plug)）

SM Connectors【1-1,000 Pieces Per Package】

JST(JSTMFG)

This small-type relay connector is equipped with a panel lock mechanism, and offers high reliability with a smaller size, more dense design, and the use of micro-currents.

[Features]
・This small-type relay connector with 2.5-mm pitch offers high reliability with a smaller size, more dense design, and the use of micro-currents.
・High contact pressure, dual contact.
· Shell type housing.
・Applicable to a wide range of panels.
▪ Arm lock mechanism.

• Volume Discount

D3000 Series

TE Connectivity

The D-3000 series, compatible with a wide range of dynamic main series sizes.

[Features]
· Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
· Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
· Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
· High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
· Newly developed copper alloy material realized with a reliable 3-point contact construction.
· Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
· Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

• Volume Discount

CAD ：

2D

5559/5557 Connector Plug Housing【50 Pieces Per Package】

MISUMI

A compact, high-density nylon connector with a pitch of 4.2 mm that is widely used for factory automation equipment, etc. It has a lock mechanism after coupling, so it is structured to prevent disconnection due to vibration. Insert a male (pin) contact to use the housing. Used for connecting with socket housings.

• UL
• CSA
• For Power Supply
• For Signal
• Sensor
• Motor
• Insertion

3M Mini-Clamp Wiremount Plug【1-8 Pieces Per Package】

3M

Industry standard e-CON-compliant connector with no wire stripping or dedicated jigs or tools required.
[Features]
· No wiring preparations required.
· Simple and reliable batch IDC connector that only requires inserting the wire and pushing the cover with pliers.
· Compact 2-mm contact pitch.
· Single-action lock mechanism facilitates connections with one hand and maintains secure mating.
· Wire insertion state can be visually confirmed through the transparent cover.
[Applications]
· Ideal for those who find it difficult to perform wiring work with crimp nylon connectors.
· For on-site wiring work.

e-CON Plug Connector【8-100 Pieces Per Package】

MISUMI

Wiring work is made easy since the need to strip wires is eliminated

• For Signal
• Connection in Boards
• Sensor
• Pressure Welding
• No Need of Dedicated Tools
• Gold Plated
• One-Touch Lock

CAD ：

2D

Universal Mate-N-Lok Connector

TE Connectivity

Universal Mate-N-Lok connector is designed to be more robust to withstand high voltages.
[Features]
·Infinite keying combinations possible.
·Pins and sockets can be used in the same housing.
·Housing locks securely and pins and sockets are useable in power supply wiring.
·UL and CSA standard compliant.
[Applications]
·Computers, office equipment, home-use gaming equipment, electric appliances, vending machines and other commercial equipment.

4.2-mm Pitch New Mini-Fit Header, Straight Type 5566

MOLEX

Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. Power connector for a maximum rated current of 13.0 A. Straight type. (Mating housing: 5557)

• Volume Discount

Plug Joint Connector【20 Pieces Per Package】

NICHIFU TERMINAL INDUSTRIES

[Features]
· Multi-wiring system for indoor wiring.
· Electrical Appliance and Material Safety Law permitted product (PSE).
· Easy branching by switching to a branched connection block.

1.25-mm Pitch, PicoBlade Plug Housing 51047

MOLEX

A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. (Mating housing: 51021, compatible terminals: 50125/ 50133)

D5000 Series

TE Connectivity

A D-5000 Series connector for use with equipment main power supply lines.

[Features]
· High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
· By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
· The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
· The contacts can be selected to match the application.
· Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
· The long tab was developed for sequential coupling of tab contacts.
· By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
· High current tines (lead): This type of tine (lead) mounts to a circuit board.
· A newly developed twin lead type.
· This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
· IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
· By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

• Volume Discount

CAD ：

2D

Commercial Mate-N-Lok Connector

TE Connectivity

The entire nylon connector is small and lightweight while also being economical and able to increase equipment density.
[Features]
·Nylon housing with plug polarity.
·The contact hole is easy to identify with a stable self-centering mechanism built in.
·The locking mechanism is completely built into the housing design.
·Keeps both halves of the connector securely in place during intense vibration and shock.
·Connector is small, lightweight and capable of increasing equipment density.
[Applications]
·Household appliances, office equipment, automobiles and other vehicles.

Spring Type Connector / 231 Series / 5-mm Pitch / Male

WAGO

The female side can be connected to 231-100 series connectors with the male side of a spring type connector. The corresponding circuit board can be connected to 232-100/200 series connectors.

CC-Link Plug Connector

MISUMI

Enabling the wire-to-wire connection of cable with just a plug and socket connector, you can reduce the number of parts to be used. A batch IDC connector with which connection work can be performed using pliers, requiring no dedicated tools

• For Power Supply
• For Signal
• CC-Link
• Pressure Welding
• No Need of Dedicated Tools
• Gold Plated
• One-Touch Lock

CAD ：

2D

EL Connector (relay connection connector)【10-100 Pieces Per Package】

JST(JSTMFG)

4.5 mm pitch relay connection nylon connector.
[Features]
·Rated current: MAX 10 A (AC/DC), rated voltage: MAX 300 V (AC/DC).
·Applicable wire range: AWG #26 to #16.
·Insert 2 wires into the contacts to crimp 2 crimp contacts.
·Compatible with the discontinued ML connector.
·Panel mountable.
[Applications]
·Used for household appliance, game machine and lighting equipment signal relay connection, etc.

VH Connector

JST(JSTMFG)

This is a highly reliable small high-capacity connector for printed circuit boards, which enables a wide range of connections from signal circuits in consumer electronics, to power supply circuits and output circuits.

Micro-Fit 3.0 Connector (43640)

MOLEX

[Features]
· Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins. Maximum rated current: 5.0 A. Brand name compatible products are also available. (Compatible housing: 43645)

4.2-mm-Pitch New Mini-Fit Plug Housing 5559

MOLEX

Nylon connector for wire-to-board and wire-to-wire connections.
[Features]
· Molex product.
· Single-row and dual-row products available.
· Connector for maximum rated current power of 9 A.
· Compatible terminal: 5558.
· Mating receptacle: 5557.
[Applications]
· Ideal for wire-to-board and wire-to-wire connections.

MX150 Housing (34345)

MOLEX

Molex Products - Mating housings: 33471/33481/33472/33482/33476/33486).

2.5 mm Pitch, Mini-SPOX, Wafer Right Angle Type 5268

MOLEX

[Features]
The Molex-manufactured Spox family of wire-to-board connectors have a mating structure that works within a pitch range of 2.50 mm to 5.08 mm. Angled. (Mating housing: 5264)

• Volume Discount

3.96 mm Pitch, For Cable-to-Circuit Board, Wafer Straight Type 5273

MOLEX

[Features]
The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5195)

VH Connector Pin Header (Vertical Mounting)【50 Pieces Per Package】

MISUMI

For 3.96 mm pitch vertical mounting with a built-in male contact. 1 package contains 50 pieces

• UL
• CSA
• TUV
• For Power Supply
• For Signal
• Sensor
• Motor
• Insertion

EI Connector Plug Housing【50 Pieces Per Package】

MISUMI

Housing with prevention mechanism against fitting errors and pitch shift. 1 package contains 50 pieces

• UL
• CSA
• TUV
• For Power Supply
• For Signal
• Sensor
• Motor
• Caulking
• Insertion

CAD ：

2D

SM Connector Plug Housing【50 Pieces Per Package】

MISUMI

Characterized by high reliability thanks to a locking mechanism in the complete loading design. 1 package contains 50 pieces

• UL
• CSA
• TUV
• For Power Supply
• For Signal
• Sensor
• Motor
• Insertion

CAD ：

2D

Micro-Fit 3.0 Connector (43045)

MOLEX

[Features]
· Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins.
· Maximum rated current: 5.0 A. Brand name compatible products are also available. A header for boards (compatible housing: 43025).
[Specifications changed in June 2015. Gloss plating ⇒ non-gloss plating. This eliminates the terminal gloss. There are no changes in the specifications.]

2.5-mm Pitch Mini-SPOX (TM) Wafer, Straight Type 5267

MOLEX

[Features]
The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. Straight. (Mating housing: 5264)

• Volume Discount

5.08 mm Pitch, For Cable-to-Circuit Board, Wafer Straight Type 5281

MOLEX

[Features]
The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5197)

• Volume Discount

Spring Type Connector / 231 Series / 5-mm Pitch / Female

WAGO

Male side can be connected to 231-600 series connectors with the female side of a spring-type connector. Corresponding circuit board can be connected to 231-100/400 series connectors.

CC-Link for Panel Mount Plug Connector

MISUMI

Workload-saving realized. CC-Link Standard Connector

• Relay
• For Power Supply
• For Signal
• CC-Link
• Pressure Welding
• No Need of Dedicated Tools
• Gold Plated
• One-Touch Lock

XH Connector Pin Header (Vertical Mounting)【50 Pieces Per Package】

MISUMI

For 2.5 mm pitch vertical mounting with a built-in male contact. 1 package contains 50 pieces

• UL
• CSA
• TUV
• For Power Supply
• For Signal
• Sensor
• Motor
• Insertion

D1000 Series

TE Connectivity

The most compact connector in the dynamic series that has achieved downsizing of equipment.
[Features]
·It supports wide range of cables. A wide variety of lineup in the series.
·Due to the housing lance structure, there is no part that gets caught in the contact.
·Connector that prevents incorrect wiring by displaying the circuit number with good visibility.
[Applications]
·For high-reliability signal lines for industrial equipment.

• Volume Discount

CAD ：

2D

D2000 Series

TE Connectivity

The D-2000 Series remains small while satisfying specifications for industrial equipment.

[Features]
Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
· Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
· Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
· Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
· Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
· Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

• Volume Discount

CAD ：

2D

2.5 mm Board-in Connector Housing (51035)

MOLEX

[Features]
· Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50097).
· Number of leads: 2 to 18 leads.

3.68-mm Pitch 1625 Miniature Plug Housing 1625-NP

MOLEX

[Features]
A Molex 3.68 mm pitch connector for standard wire-to-wire connections. Single-row, double-row, and panel mount types are available. (Mating housing: 1625-NP, Compatible terminal: 1560/1854)

EI Connector Pin Header (Horizontal Mounting)【50 Pieces Per Package】

MISUMI

For 2.5 mm pitch horizontal mounting with a built-in male contact. 1 package contains 50 pieces

• UL
• CSA
• TUV
• For Power Supply
• Solder
• Tin-Plated
• Insertion

CAD ：

2D

3M Power Clamp Wire Mount Socket, 5 Pin

3M

CC-Link standard connector for man-hour saving by single-action connector and cable assembly.
[Features]
·35505-6000-B0MGF is compliant with CC-link standard connectors.
·IDC connector that does not require special dedicated tools and can be connected with pliers.
·A large diameter cable of 0.75 mm2 can be connected easily and securely.
·The maximum allowable current is 10 A per position.
·The polarity keys prevent insertion mistake.
·Due to the single-action lock mechanism, this product is easy to attach and detach with one hand, and also provides secure mating and holding.
[Features]
·Ideal for connection with small number of positions with a maximum allowable current of 10 A.
·Communication interface for CC-link devices.

PA connector

JST(JSTMFG)

Strong lock-type connector that supports high-density mounting by reducing the area the circuit board occupies.

• Volume Discount

PH Connector【500-1,000 Pieces Per Package】

JST(JSTMFG)

This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

• Volume Discount

2.5-mm Pitch Mini-Lock (TM) Plug Housing 51198

MOLEX

[Features]
• Housing 51103 for Molex fittings; can fit Mini-Locks.
· Number of leads: 2 to 15 leads.
• Housing lance.
• Includes flanges for panel mounting.
• Panel thickness: 0.8 - 2.0 mm compatible.

2.5-mm Pitch Relay Plug Housing 51112

MOLEX

[Features]
· A Molex wire-to-wire connector.
Retainer-compatible types are also available (compatible housing: 51111, compatible terminal: 50398).
Number of pins: 2 to 15.
With panel-mounting tabs: 51112 ★ ★ 30.
Without panel-mounting tabs: 51112 ★ ★ 10.

2.0 mm Board-in Connector Housing (51015)

MOLEX

[Features]
· Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50034).
· Number of leads: 2 to 15 leads.
• Low-profile type.

2.5-mm Pitch Mini-Latch (TM) Wafer, Right Angle Type 5046

MOLEX

[Features]
An ever-popular Molex connector for wire-to-circuit board connections. Angled type. (Mating housing: 5051/51191)

• Volume Discount

1.25-mm Pitch PicoBlade Wafer, Right Angle Type 53048

MOLEX

A number of wire-to-circuit board and wire-to-wire optional extra Molex products available. There are variations in header of both the types: Surface mount type and through-hole type. Angle type (mating housing: 51021)

• Volume Discount

SL™ Modular Angle Header (70553)

MOLEX

Molex 2.54-mm pitch connector for circuit board-to-wire connections. Available for discrete wires and all types of IDT/FFC cables. 4

Easy-Connect Connector for Industrial Equipment - XN2

OMRON

[Features]
· A simple wire connection connector that is compliant with e-con specifications and is suitable for sensor connections.
· Utilizes a spring clamp method, which has a solid track record for wire connections in industrial uses.
· Wire connections are simple and do not require special tools.
· Repeat wire connections (repairs) are also possible.
· The 28–20 AWG (0.08–0.5 mm²) wiring range can be supported with a single connector (cover OD: ⌀1.5 or smaller).

Spring Type Male Connector, 231 Series, 5.08-mm Pitch / Male

WAGO

A female spring-type connector with locking mechanism to enable connection to the 231–100 Series connectors. Compatible boards: 232–100/200 Series (5.08-mm pitch)