Nylon Connectors（Connector Shape：Square shape）

4.2-mm-Pitch New Mini-Fit Housing 5557

MOLEX

Molex connector for wire-to-wire and board-to-board connections.
[Features]
· Single-row and dual-row products available (compatible terminal: 5556G, mating header: 5566, 5569).
· For wire-to-wire connections, use compatible housing: 5559.
· Fully-insulated terminal, positive lock housing, low contact pressure, polarized housing.
· The Mini-Fit product family provides blind-mating, TPA and high-current options.
· Connector for maximum rated current power of 9.0 A.
[Applications]
· Consumer devices, etc.

D3000 Series

TE Connectivity

The D-3000 series, compatible with a wide range of dynamic main series sizes.

[Features]
· Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
· Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
· Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
· High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
· Newly developed copper alloy material realized with a reliable 3-point contact construction.
· Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
· Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

• Volume Discount

CAD ：

2D

Plug Joint Connector【5-20 Pieces Per Package】

NICHIFU TERMINAL INDUSTRIES

[Features]
· Multi-wiring system for indoor wiring.
· Electrical Appliance and Material Safety Law permitted product (PSE).
· Easy branching by switching to a branched connection block.

Single-Action Connector WFR Series【5 Pieces Per Package】

WAGO

[Features]
·New mechanism using Cage Clamp spring method.
・ Safe and secure with a transparent housing.
・ Single wire, IV 7 stranded wires, and flexible stranded wire can be mixed.
・ Visible, easy, small, and will not loosen.
・ Single-action connection with soft lever operation.
・ In addition to indoor wiring applications, it can also be used for wiring general electric facilities, etc.

3M Mini-Clamp Wiremount Plug【1-8 Pieces Per Package】

3M

Industry standard e-CON-compliant connector with no wire stripping or dedicated jigs or tools required.
[Features]
· No wiring preparations required.
· Simple and reliable batch IDC connector that only requires inserting the wire and pushing the cover with pliers.
· Compact 2-mm contact pitch.
· Single-action lock mechanism facilitates connections with one hand and maintains secure mating.
· Wire insertion state can be visually confirmed through the transparent cover.
[Applications]
· Ideal for those who find it difficult to perform wiring work with crimp nylon connectors.
· For on-site wiring work.

4.2-mm Pitch New Mini-Fit Header, Straight Type 5566

MOLEX

Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. Power connector for a maximum rated current of 13.0 A. Straight type. (Mating housing: 5557)

• Volume Discount

2.5 mm Pitch, Mini-SPOX, Wafer Right Angle Type 5268

MOLEX

[Features]
The Molex-manufactured Spox family of wire-to-board connectors have a mating structure that works within a pitch range of 2.50 mm to 5.08 mm. Angled. (Mating housing: 5264)

• Volume Discount

2.5-mm Pitch Mini-SPOX (TM) Housing 5264

MOLEX

[Features]
The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5267/5268, Compatible terminal: 5263)

Universal Mate-N-Lok Connector

TE Connectivity

Universal Mate-N-Lok connector is designed to be more robust to withstand high voltages.
[Features]
·Infinite keying combinations possible.
·Pins and sockets can be used in the same housing.
·Housing locks securely and pins and sockets are useable in power supply wiring.
·UL and CSA standard compliant.
[Applications]
·Computers, office equipment, home-use gaming equipment, electric appliances, vending machines and other commercial equipment.

2.5-mm Pitch Wire-to-Board Housing 5051

MOLEX

[Features]
An ever-popular Molex connector for wire-to-circuit board connections. Housing (Mating wafers: 5045/5046, conforming terminal: 5159)

Micro-Fit3.0 (TM) Connector (43025)

MOLEX

[Features]
A Molex 3.00 mm pitch connector. Available in a variety of fitting forms and poles, including wire-to-wire, wire-to-circuit board, and board-to-board types. Maximum rated current is 5.0 A, and we also have products compatible with other brands. (Coupling housings: 43020/43045/44242)

1.25-mm Pitch, PicoBlade Plug Housing 51047

MOLEX

A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. (Mating housing: 51021, compatible terminals: 50125/ 50133)

Connector for Servo Motor Encoder

MOLEX

Nylon Connector Kit Dedicated for Servo Motor Encoder.
[Features]
・ Made by Molex
・ Housing assembly, cap, cover assembly, shell body, shell cover, bushing set
[Applications]
・ Ideal for industrial equipment

PC I/O Connector

TE Connectivity

The manufacturer has commercialized low cost input/output connector for PLC and peripheral devices.
[Features]
・ For the receptacle type, cable extraction angles of 90° and 75° can be selected by the select bar, which contributes to simplification of parts management
・ The unused side can be closed and dust-proof measures are perfect. In addition, the movable screw and nut are fixed to the case in advance, reducing the number of assembly steps
・ The circuit-board mount type that uses the retention leg has single row of 40 pins and an integrated 2-row 80 pins that do not require assembly, which contributes to simplification of parts management/process
・ The circuit board type has a retention leg that allows for normal in-flow soldering processes
・ It uses nickel base and gold plating specifications
[Applications]
・ Industrial equipment products

D5000 Series

TE Connectivity

A D-5000 Series connector for use with equipment main power supply lines.

[Features]
· High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
· By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
· The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
· The contacts can be selected to match the application.
· Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
· The long tab was developed for sequential coupling of tab contacts.
· By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
· High current tines (lead): This type of tine (lead) mounts to a circuit board.
· A newly developed twin lead type.
· This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
· IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
· By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

• Volume Discount

CAD ：

2D

Mini Universal Mate-N-Lok Connector【1-20 Pieces Per Package】

TE Connectivity

Small connector that facilitates high density wiring inside equipment.

2.5-mm Pitch Mini-Lock Receptacle Housing 51103

MOLEX

Also suitable for Molex wire-to-board connectors. (Mating housings: 51198 / 53375 / 53426 / 53517 / 53608, conforming terminals: 50351 / 50752)

Commercial Mate-N-Lok Connector

TE Connectivity

The entire nylon connector is small and lightweight while also being economical and able to increase equipment density.
[Features]
·Nylon housing with plug polarity.
·The contact hole is easy to identify with a stable self-centering mechanism built in.
·The locking mechanism is completely built into the housing design.
·Keeps both halves of the connector securely in place during intense vibration and shock.
·Connector is small, lightweight and capable of increasing equipment density.
[Applications]
·Household appliances, office equipment, automobiles and other vehicles.

3.96 mm Pitch, For Cable-to-Circuit Board, Wafer Straight Type 5273

MOLEX

[Features]
The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5195)

PH Connector【1-1,000 Pieces Per Package】

JST(JSTMFG)

This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

• Volume Discount

4.80-mm Pitch Mini-Fit Relay Housing (5025 / Plug)

MOLEX

A 4.80 mm pitch wire-to-wire nylon connector.
[Features]
· Fully protected terminal with insulated housing walls.
[Applications]
· Optimal for consumer devices such as power and wire-to-wire types.

Micro-Fit 3.0 Connector (43640)

MOLEX

[Features]
· Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins. Maximum rated current: 5.0 A. Brand name compatible products are also available. (Compatible housing: 43645)

Single Action Connector WF Series【5-50 Pieces Per Package】

WAGO

A connector which allows for easy wire connections via lever operation.
[Features]
· Wires can be easily connected via lever operation, without the need for crimp terminals or tools.
· Allows wires to be repeatedly disconnected, connected and reused.
· Different types of wires can be connected and used together such as single wires, stranded wires and IV 7 wire stranded wires.
· Strong against vibrations and will not come loose, meaning there is no need to re-tighten and no need for maintenance.
[Applications]
· For relaying and branching the power supplies of car stereos. Relaying and branching LEDs.
Connecting new synthetic fibers and power supplies in control panels. Connecting wires of different thicknesses and types.

Single-Action Connector WFR-L Series【15-50 Pieces Per Package】

WAGO

Single-action connection of stranded wires / solid wires by lever operation. Large size for 6 mm2 cable.

VH Connector【1-50 Pieces Per Package】

JST(JSTMFG)

This is a highly reliable small high-capacity connector for printed circuit boards, which enables a wide range of connections from signal circuits in consumer electronics, to power supply circuits and output circuits.

4.80-mm Pitch Mini-Fit Relay Housing (5025 / Receptacle)

MOLEX

Molex terminals are completely protected by the housing's insulation wall. (Mating housing: 5025Plig, conforming terminal: 5005)

2.5-mm Pitch Mini-SPOX (TM) Wafer, Straight Type 5267

MOLEX

[Features]
The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. Straight. (Mating housing: 5264)

• Volume Discount

Spring Type Connector, 733 Series, 2.5-mm Pitch, Female

WAGO

The male side can be connected to 733-200 series connectors with the female side of the mini type spring connector. The corresponding circuit board can be connected to 733-300 series connectors. Maximum wire size is 0.5 mm2.

Spring Type Connector / 231 Series / 5-mm Pitch / Male

WAGO

The female side can be connected to 231-100 series connectors with the male side of a spring type connector. The corresponding circuit board can be connected to 232-100/200 series connectors.

D1000 Series

TE Connectivity

The most compact connector in the dynamic series that has achieved downsizing of equipment.
[Features]
·It supports wide range of cables. A wide variety of lineup in the series.
·Due to the housing lance structure, there is no part that gets caught in the contact.
·Connector that prevents incorrect wiring by displaying the circuit number with good visibility.
[Applications]
·For high-reliability signal lines for industrial equipment.

• Volume Discount

CAD ：

2D

3M Power Clamp Wire Mount Socket, 5 Pin

3M

CC-Link standard connector for man-hour saving by single-action connector and cable assembly.
[Features]
·35505-6000-B0MGF is compliant with CC-link standard connectors.
·IDC connector that does not require special dedicated tools and can be connected with pliers.
·A large diameter cable of 0.75 mm2 can be connected easily and securely.
·The maximum allowable current is 10 A per position.
·The polarity keys prevent insertion mistake.
·Due to the single-action lock mechanism, this product is easy to attach and detach with one hand, and also provides secure mating and holding.
[Features]
·Ideal for connection with small number of positions with a maximum allowable current of 10 A.
·Communication interface for CC-link devices.

2.5-mm Pitch Relay Plug Housing 51112

MOLEX

[Features]
· A Molex wire-to-wire connector.
Retainer-compatible types are also available (compatible housing: 51111, compatible terminal: 50398).
Number of pins: 2 to 15.
With panel-mounting tabs: 51112 ★ ★ 30.
Without panel-mounting tabs: 51112 ★ ★ 10.

3.5-mm Pitch Cable-to-Board Wafer, Straight Type 53258

MOLEX

[Features]
· Molex wire-to-board connector.
• Straight type (fits housing 51067).
· Number of leads: 2 to 15 leads.
• Phosphor bronze: 53258-30.
• Brass: 53258-29.

3.5 mm Pitch, For Cable-to-Circuit Board, Wafer Right Angle Type, 53259

MOLEX

[Features]
· Molex wire-to-board connector.
• Right angle type (fits housing 51067).
· Number of leads: 2 to 15 leads.
• Phosphor bronze: 53259-17; Brass: 53259-29.

C-Grid Product (70013)

MOLEX

A Molex 2.54 mm pitch, 2‑row, board-to-board connector.　Straight and right-angled types. (Compatible housing: 70066, compatible terminal: 70058)

2.5-mm Pitch Mini-Latch (TM) Wafer, Right Angle Type 5046

MOLEX

[Features]
An ever-popular Molex connector for wire-to-circuit board connections. Angled type. (Mating housing: 5051/51191)

• Volume Discount

2.5-mm Pitch, Mini-Lock, Wafer Right Angle Type 53426

MOLEX

Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. Angle type (Mating housings: 51102 / 51103 / 51163)

1.25-mm Pitch PicoBlade (TM) Housing 51021

MOLEX

A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. (Mating plug: 51047)

• Volume Discount

6.7-mm Pitch .093", 3191 Series, Housing 3191-NP1

MOLEX

[Features]
Molex power connectors, available in 5.03 mm, 6.30 mm and 6.70 mm pitch types. (Mating housing: 3191NP, Compatible terminal: 1189)

3.68-mm Pitch 1625 Miniature Plug Housing 1625-NP

MOLEX

[Features]
A Molex 3.68 mm pitch connector for standard wire-to-wire connections. Single-row, double-row, and panel mount types are available. (Mating housing: 1625-NP, Compatible terminal: 1560/1854)

Male Header With Solder Pin / 734 Series, 1-level / Right Angle / 3.5 mm Pitch

WAGO

[Features]
　● Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
　● Maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
　● Incorrect insertion is impossible.
　● An accessory coding key can be attached.

Spring Connector, 734 Series, 3.81 mm Pitch, Female (Compact Size)

WAGO

The male side can be connected to 734-300 series connector with the female side of a spring type connector, and the corresponding circuit board can be connected to 3.81 mm pitch 734-200 series/400 series connectors. It is a very compact connector.

Spring Type Connector, Mismatch Prevention Type, 721 Series, 5 mm Pitch, Female

WAGO

Male side can be connected to 721-600 series connectors with the female side of a spring type connector, and the corresponding circuit board can be connected to 5 mm pitch 721-100 series/400 series connectors.

PHD Connector

JST(JSTMFG)

A double-row type compact connector that meets the demands of high-density mounting.

2.5 mm Board-in Connector Housing (51035)

MOLEX

[Features]
· Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50097).
· Number of leads: 2 to 18 leads.