MIXO Modular Insert & Contact

ILME

[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.

[Enclosure]C Type IP66, Rotary Lever Series

ILME

Ilme's traditional lever C type
It is a standard enclosure of Ilme connector.
A uniquely developed rotary lever enables smooth attachment and detachment.
Stainless steel levers and springs ensure safe and secure fitting and airtightness.
The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

Solder/Press Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

CAD ：

2D

MR Male Connector

MISUMI

High-density MR Male Connector

CAD ：

2D

57 Series Soldering/DIP-Type Connector

DDK

A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.

[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

CAD ：

2D

1‑mm Pitch Board-To-Cable Connector For LVDS Signals, FX15 Series

HIROSE ELECTRIC

A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

Han E / EE Series Connector (Screw Type / Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

CD Type, Crimp Type Connector, CD Series

HIROSE ELECTRIC

A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).

[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

Centronics Solder Spring-lock Connector (Panel Mountable Female)

MISUMI

[Features]A Centronics connector for fixing with a lineup of low-priced products. A connector that is mounted on a panel and used to connect with a male connector. Cable is connected by soldering.

CAD ：

2D

MR Female Connector

MISUMI

High-density MR female Connector

• Volume Discount

CAD ：

2D

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

MR Straight Hooded Connector

MISUMI

Standard Straight MR Hood

CAD ：

2D

CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

ILME

CK / CKS Small screw type / spring type, 10A / 250 V, Insert

[Features]
・CK/CKS.
・Small screw type / spring type.
▪ 10A/250 V insert

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.

[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided

Centronics Solder Spring-lock Connector (Male)

MISUMI

[Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

CAD ：

2D

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

Solder/Press-fit (High-density) D-Sub Connector

MISUMI

High-density D-sub Connector. Allows for high-density wiring without increasing wiring space

CAD ：

2D

Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. The screw connection is equipped with a contact. Please confirm the type and male or female before ordering.

CAD ：

2D

FCN connector Solder type female connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.
[Features]
·Robust and ideal for interfaces due to the metal shell and metal case.
·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.
·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.
·For FCC and other EMI countermeasures.
·Live line connection (3 steps) is also available.
·Ideal for horizontal, parallel and vertical connections.
·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.
[Applications]
·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

PCR Half Pitch Solder Female Connector

MISUMI

Half-pitch Model PCR Solder Model Connector

CAD ：

2D

2.00-mm Pitch Serial I/O Connector

MOLEX

A Molex 2.0 mm pitch connector for external relay connection.

D-sub Connector, Crimped Housing

MISUMI

Crimp connection model that makes consistent workmanship quality possible

CAD ：

2D

1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

• Volume Discount

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.

[Features]
・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

Han Q Series Connector (Crimp Connection)

HARTING

This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

Centronics Press-fit Spring-lock Connector (Female)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

CAD ：

2D

MR Vertical/Horizontal Dual Hooded Connector

MISUMI

For Vertical and Horizontal Dual-use MR Hood

CAD ：

2D

D-Sub Connector (Straight Board-Mounted Type), SD Series

HIROSE ELECTRIC

A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.

[Features]
· Has a metal shell and so has a small and lightweight connector.
· The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.
· Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.
· With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.
· The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.

D-Sub Connectors - XM2/XM3

OMRON

These D-sub connectors are ideal for use with OA equipment interfaces.
[Features]
· Shielded connector for use in EMI countermeasures.
· The metalized plastic hood (Model XM2S) provides excellent noise protection.
· Multi-hole ferrite core equipped types (Model XM3B-F) are also available.
· Offers a space-saving design and superior noise protection at high frequencies.
· A wide variety of mounting brackets and grounding fixtures are available.
· Conforms to UL standards (File No. E103202) as standard (excluding the Model XM2S and some other products.)
[Applications]
· Small and tough-wearing structure with a metal shell

• Volume Discount

EMI Countermeasure Solder/Press Contact D-sub Connector

MISUMI

Entire shell has been nickel-plated as an EMI countermeasure, and dimple processed to ensure a firm contact with the partner

CAD ：

2D

Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 Series

HIROSE ELECTRIC

Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.

[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Rack And Panel Connector, QR/P8 Series

HIROSE ELECTRIC

• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.

[Features]
• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
• In addition, terminals for signals are positioned with a 2-mm pitch.
• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
• This product has obtained UL, CSA, and TUV certifications.

Rectangular Multi-Pin Rack / Panel Crimp Connector, QR/P Series

HIROSE ELECTRIC

Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.

[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• Guide pins are made of metal for the durability to withstand coupling shocks.
• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

57GE Series Straight DIP Ribbon Receptacle.

DDK

[Features]
・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.
・Type 40 (receptacle for I/F).

CAD ：

2D

[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert

ILME

New generation lever IL-BRID Series.
[Features]
・ The newly-developed IL-BRID lever is made of stainless steel and has smooth resin.
The manufacturer has adopted the latest design in which these 2 contradictory features are perfectly coordinated.
・ When you operate the lever, the resin part first engages the peg to reduce friction and then slides and is fixed.
・ After that, the stainless steel part is fixed to the peg to ensure a high load capacity.
・ Low friction makes it suitable for frequent insertion and removal applications.

MIL connector IDC female connector (no lock)

MISUMI

[Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

PCS Series

HONDA TSUSHIN KOGYO

Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors

[Features]
· Board to cable types available in 20 to 96 cores.
• Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
· Soldered types also available.
▪ For EMI measures other than FCC.
• Built with a durable structure for use as an interface.
· Quick lock using a metal lock spring.
· Those for panel relays are also available.
· Accessories for preventing incorrect insertion are also available.
· A wide range of core numbers, from 34 to 150, are also available for board to board.
• Specifically designed for smooth insertion and extraction, even when using multiple cores.
• Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

HIF3B Series MIL Standard-Compliant Ribbon Cable Connector

HIROSE ELECTRIC

MIL standard-compliant rectangular ribbon cable connector.
[Features]
· HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.
· Compatible with HIF3 series.
· HIF3B series products are UL-listed connectors.
· Features a mechanism to prevent mis-insertion.
· A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)
· A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.
· A system that embeds the polarizing key in the socket hole and guides it.
· A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.
· The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).
[Applications]
· A wide variety of models are available, enabling use with a wide range of equipment.

Miniature Low-Profile Interface DN Connector

HIROSE ELECTRIC

This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular

[Features]
· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
· The single-action lock mechanism provides excellent operability.
· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
· The dip connector includes a snap (circuit board temporary joint) bracket.
· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
· Depending on the application, cable can be extracted in either the vertical or horizontal direction.

Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. It is a highly reliable crimp connection that can shorten the work time. Fully compatible with products from major connector manufacturers. Please check the male or female before ordering.

CAD ：

2D

Solder Spring-lock Centronics Connector (PCB Angle Male)

MISUMI

General-Purpose, Angle, Centronics Connector for PCB Mounting

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

CAD ：

2D

Solder and Machine Contact D-Sub Connector (High Current)

MISUMI

Made by ERNI in Germany. High-current capacity model supporting up to 20 A

CAD ：

2D