Square Connectors（Connector Shape：Square shape）

MIXO Modular Insert & Contact

ILME

[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.

Convertible Male/Female D-Sub Connector

MISUMI

[Features]An adapter that converts the male/female D-sub connector or extends the harness. Existing wiring can be effectively used for extension.

CAD ：

2D

Han E / EE Series Connector (Screw Type / Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

[Enclosure]C Type IP66, Rotary Lever Series

ILME

Ilme's traditional lever C type
It is a standard enclosure of Ilme connector.
A uniquely developed rotary lever enables smooth attachment and detachment.
Stainless steel levers and springs ensure safe and secure fitting and airtightness.
The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

57 Series Soldering/DIP-Type Connector

DDK

A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.

[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).

Dsub connector EMI countermeasure product/general-purpose product Resin hood

MISUMI

[Features]A general-purpose resin hood for EMI (electromagnetic interference) countermeasures that achieves low prices. There are 2 types of mounting screws, a short screw type that can be fixed with a screwdriver and a long screw type that can be operated by hand, making it easy to fix. Each has M2.6 [metric thread] and #4-40 [imperial thread], so you can choose according to your application.

CAD ：

2D

Solder/Press Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

CAD ：

2D

Han Series Hood/Housing

HARTING

Han series hood/housing.
[Features]
·Shielded with various locking mechanisms to provide high reliability suitable for industrial use.
·Good material and design have been recognized in the last 10 years.
·Han A and Han B products are standard in the industrial field.
[Applications]
·Ideal for industrial use.

CD Type, Crimp Type Connector, CD Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).

[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

MR Straight Hooded Connector

MISUMI

Standard Straight MR Hood

CAD ：

2D

C200HX, C200HG, C200HE Series, Connectors

OMRON

C200HX, C200HG, C200HE series, connector.

D-Sub, D02, D02-M15 Series

JAPANAVIATION

A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.

[Features]
・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
・Interchangeable with different connector types and commonly used accessories.
・The shell joint shape has polarity, fully preventing accidental reverse insertion.
・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

Small, Rectangular Interface Connector, 3200 Series

HIROSE ELECTRIC

This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.

[Features]
• A receptacle connector board implementation surface with a height of the 2.9 mm.
• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
• This receptacle connector can also be prepared in an embossed packaging product format.
• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
• A latch lock is applied to both sides for mating processes.
• This lock is implemented with the minimum space possible, and helps downsize your product set.
• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
• The number of pins available is either 8 or 10.

D-sub Connector, Crimped Housing

MISUMI

Crimp connection model that makes consistent workmanship quality possible

CAD ：

2D

Han Waterproof E-Model Connector (Screw Connection)

MISUMI

E Model Connector

CAD ：

2D

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

Centronics Solder Spring-lock Connector (Male)

MISUMI

[Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

CAD ：

2D

MR Female Connector

MISUMI

High-density MR female Connector

• Volume Discount

CAD ：

2D

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.

[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided

CSH Tool Not Required Spring Type 16A / 500V Insert

ILME

CSH, no-tool-required spring type, 16A / 500V insert

[Features]
・CSH.
・No-tool-required spring type.
▪ 16A / 500V.
▪ Insert

EMI Countermeasure D-Sub Connector with Aluminum Die-cast Hood

MISUMI

Sturdy and Lightweight D-sub Hood Made of Aluminum

CAD ：

2D

EMI Countermeasure D-sub Connector with Resin Hood (Both Solder/Pressure Welding)

MISUMI

[Features]Hood manufactured by Hirose Electric. The surface of the hood is nickel plating, making it an excellent EMI (electromagnetic interference) countermeasure. A hood that can be attached when connecting a fused cable (round cable with a ribbon cable tip) to an IDC type D-sub connector. Solder-type D-sub connectors (including high-density types) can also be plugged.

CAD ：

2D

FCN Extension Connector

MISUMI

Manufactured by Fujitsu Components. FCN hood for relay only.

CAD ：

2D

Centronics Solder Spring-lock Connector (Panel Mountable Female)

MISUMI

[Features]A Centronics connector for fixing with a lineup of low-priced products. A connector that is mounted on a panel and used to connect with a male connector. Cable is connected by soldering.

CAD ：

2D

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.
[Features]
·Robust and ideal for interfaces due to the metal shell and metal case.
·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.
·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.
·For FCC and other EMI countermeasures.
·Live line connection (3 steps) is also available.
·Ideal for horizontal, parallel and vertical connections.
·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.
[Applications]
·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.

[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.

17JE Series Soldering Type Connector

DDK

17 Series (Dsub type) soldering connection type square connector for cable equipment.
[Features]
· Square connector for solder wire connections, with solder cup type contact.
· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
· The hood is metalized plastic, which provides weight reduction and a high shielding effect.
· Either the pin connector or the socket connector can be selected.
· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
[Applications]
· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

CAD ：

2D

Solder and Press Contact PLC D-Sub Connector

MISUMI

Used with Mitsubishi Electric Q series which is highly trusted in Japan

CAD ：

2D

FCN connector Solder type female connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

D-Sub Connector Plug Case (Product With EMI Measures), CTH Series

HIROSE ELECTRIC

These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.

[Features]
· Because the lock mechanism is a screw type mechanism it is rugged and reliable.
· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
• Use screws to ground the drain wire of the cable with a clamp.
• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
• For FD*D, however, wire a fused I/O cable when using the case.
• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

D-Sub Connector (Solder Termination Type), HD Series

HIROSE ELECTRIC

A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.

[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

• Volume Discount

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.

[Features]
・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

FCN-360 Type Square Connector

FUJITSU COMPONENT

A versatile square connector for board-to-cable and board-to-board connections.
[Features]
· Features a 2.54 mm terminal arrangement between adjacents and between columns, allowing for compact high-density mounting.
· The robust shell guide helps prevent mis-insertions and protects the terminals.
· The compatible terminal connection methods are by crimping, pressure welding, soldering, wire wrapping and direct attachment.
· Combinations of jacks and plugs can be freely selected from a variety of options for use in different types of application.
[Applications]
· Optimal for industrial equipment, PLC, etc.

• Volume Discount

D-Sub Connectors - XM2/XM3

OMRON

These D-sub connectors are ideal for use with OA equipment interfaces.
[Features]
· Shielded connector for use in EMI countermeasures.
· The metalized plastic hood (Model XM2S) provides excellent noise protection.
· Multi-hole ferrite core equipped types (Model XM3B-F) are also available.
· Offers a space-saving design and superior noise protection at high frequencies.
· A wide variety of mounting brackets and grounding fixtures are available.
· Conforms to UL standards (File No. E103202) as standard (excluding the Model XM2S and some other products.)
[Applications]
· Small and tough-wearing structure with a metal shell

• Volume Discount

EMI Countermeasure D-Sub Connector with Metal Hood

MISUMI

[Features]This is a metal hood manufactured by J.S.T. MFG. CO., LTD. (JST). A hood for D-sub connectors, widely used in general. Easy to assemble and robust. The surface of the mild steel hood is nickel plating to maximize the EMI effect when connecting to a shielded cable. The box-like shape completely covers the connection, etc., between the connector and the cable, achieving a high level of shielding effect against noise intrusion. Cable is clamped to a high standard of holding power as the cover nuts that clamp the hood also clamp the cable together.

• Volume Discount

CAD ：

2D

Han Waterproof A-Model Connector (Screw Connection)

MISUMI

A Model Connector

CAD ：

2D

1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

• Volume Discount

DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)【1-500 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
· Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
· Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
· Choose from gold or tin plating to match application. SMT-compatible products are also available.
· Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
· Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
[Applications]
· For all types of OA equipment, including copy machines and printers.

• Volume Discount

[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert

ILME

New generation lever IL-BRID Series.
[Features]
・ The newly-developed IL-BRID lever is made of stainless steel and has smooth resin.
The manufacturer has adopted the latest design in which these 2 contradictory features are perfectly coordinated.
・ When you operate the lever, the resin part first engages the peg to reduce friction and then slides and is fixed.
・ After that, the stainless steel part is fixed to the peg to ensure a high load capacity.
・ Low friction makes it suitable for frequent insertion and removal applications.

0930 Series Han Waterproof, Single-Lever Pedestal Connector (for Panel Mount)

MISUMI

Single-lever panel mounting pedestal for waterproof panel that can incorporate all connector series, depending on the number of cores.
Aluminum die-cast products are added in one section of the lid

CAD ：

2D

Solder/Press-fit (High-density) D-Sub Connector

MISUMI

High-density D-sub Connector. Allows for high-density wiring without increasing wiring space

CAD ：

2D

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

CAD ：

2D

MR Male Connector

MISUMI

High-density MR Male Connector

CAD ：

2D

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

HIF3B Series MIL Standard-Compliant Ribbon Cable Connector【1-100 Pieces Per Package】

HIROSE ELECTRIC

MIL standard-compliant rectangular ribbon cable connector.
[Features]
· HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.
· Compatible with HIF3 series.
· HIF3B series products are UL-listed connectors.
· Features a mechanism to prevent mis-insertion.
· A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)
· A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.
· A system that embeds the polarizing key in the socket hole and guides it.
· A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.
· The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).
[Applications]
· A wide variety of models are available, enabling use with a wide range of equipment.