Interface Terminal Blocks (Round/Y Terminal Types)（Representative Standard：CUL）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]
  ·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.
  · Boasts an even slimmer finish.
  · The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
  · The terminal number and connector number are wired 1-to-1.
  · Circuits can be freely designed.
  ·Workability is further improved by adopting a new screw method.
  ·If you use a fork type terminal, the PCN series is definitely advantageous.
  · A lever type which enables neat and tidy removal from rails.
  · No tools required for removal, and so no need for wasted space on the backside of the main body.
  · Compatible with both rail mounting and direct mounting.
  ·Equipped with support screw (dedicated Y-shaped crimp terminal).
  ·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.
  ·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector / Other	20 ～ 50	DIN rail/Direct attachment	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	7.62	Other	86 ～ 200	M3	CUL	40	36 ～ 36.8

  From: ₹ 2,927.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.
  
  [Features]
  · An ultra small size with a pitch between terminals of just 7 mm.
  · Ideal for size reducing PLC or SBC interfaces.
  · A compact type for helping reduce the size of control panels.
  · The connector and terminal block are easy-to-handle 1:1 wire connection types.
  · Uses SS terminal screws for easy wiring.
  · Structured to prevent screws from dropping out and becoming lost.
  · The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
  · Compatible with both DNI rail mounting and direct mounting methods.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector / Other	20 ～ 50	DIN rail/Direct attachment	Mitsubishi Electric / Omron / KEYENCE	7	PLC / I/O board	80 ～ 184	M3	CUL	40	36 ～ 36.8

  From: ₹ 2,458.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch

  PATLITE (KASUGA)

  A 7-mm pitch interface terminal block that uses a full-cover structure that does not expose the circuit board, and is designed with safety in mind.
  [Features]
  ・ The cover is openable and can be fixed at any position
  ・ Compared to the conventional TIFA7 Series, it is a series that reduces the installation space by approx. 12% pursuing further space saving
  ・ Standard-product connector is Hirose Electric MIL connector (Ribbon cable connector)
  ・ OMRON MIL connector and Fujitsu F360 series connector (input/output connector for circuit board) can also be mounted
  [Applications]
  ・ Ideal for PLC (programmable controller) and computer interface

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	34	DIN rail/Direct attachment	KEYENCE	7	PLC	129	M3	CUL	40	42.3

  From: ₹ 3,527.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block, PCI Series, Crimp Terminal Type

  TOYOGIKEN

  [Features]
  · The PCI series is compatible with the main Mitsubishi and OMRON sequencers (forDC5V to 24V).
  · A slim design with a main body width of just 40 mm. For use with 35 mm wide DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	With DIN rail	Mitsubishi Electric / Omron	7.62	PLC	162	M3	CUL	40	36.8

  From: ₹ 3,808.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	TOYOGIKEN	TOYOGIKEN	PATLITE (KASUGA)	TOYOGIKEN
Product Series	Terminal Block, PCN Series	Terminal Block, PCN7 Series	Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch	Connector Terminal Block, PCI Series, Crimp Terminal Type
CAD	2D	2D	2D
From	₹ 2,927.76	₹ 2,458.60	₹ 3,527.20	₹ 3,808.07
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Connector	MIL Connector / FCN Connector / Other	MIL Connector / FCN Connector / Other	MIL Connector	MIL Connector
Number of Poles(Pole)	20 ～ 50	20 ～ 50	34	20
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail
Supported equipment manufacturer	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	Mitsubishi Electric / Omron / KEYENCE	KEYENCE	Mitsubishi Electric / Omron
Pitch Between Terminals(mm)	7.62	7	7	7.62
Supported equipment	Other	PLC / I/O board	PLC	PLC
Dimension width(mm)	86 ～ 200	80 ～ 184	129	162
Terminal Block Screw	M3	M3	M3	M3
Representative Standard	CUL	CUL	CUL	CUL
Dimension vertical(mm)	40	40	40	40
Dimension depth(mm)	36 ～ 36.8	36 ～ 36.8	42.3	36.8

Loading...