Interface Terminal Blocks (Round/Y Terminal Types)（Supported equipment manufacturer：Omron）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]
  ·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.
  · Boasts an even slimmer finish.
  · The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
  · The terminal number and connector number are wired 1-to-1.
  · Circuits can be freely designed.
  ·Workability is further improved by adopting a new screw method.
  ·If you use a fork type terminal, the PCN series is definitely advantageous.
  · A lever type which enables neat and tidy removal from rails.
  · No tools required for removal, and so no need for wasted space on the backside of the main body.
  · Compatible with both rail mounting and direct mounting.
  ·Equipped with support screw (dedicated Y-shaped crimp terminal).
  ·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.
  ·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	20 ～ 40	DIN rail/Direct attachment	Omron	7.62	Other	86 ～ 162	M3	UL / CUL / TUV	40	36 ～ 36.8

  From: ₹ 2,878.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

  OMRON

  Connector terminal block conversion units designed specifically to connect PLCs.
  [Features]
  ・ The wiring pattern specialized for PLC connection has reduced the trouble of checking the signal layout
  ・ The name paper of the terminal block will be the PLC address
  ・ Connection method is cross-head screw type, straight-slot screw type, push-in type
  ・ Available with and without power supply terminal
  ・ The operability of the push-in terminal has been improved, making it even easier to use
  ・ Connection work has become smoother with a terminal arrangement that takes workability into consideration
  ・ It can be mounted with DIN rail and screws
  ・ With a common design, it can be customized
  ・ The ribs for screw mounting are designed to dive into the DIN rail so that they do not interfere with DIN rail mounting parts or end plates
  ・ Of course, even if XW2Rs are connected to each other, they will be placed without any interference
  [Applications]
  ・ Convert various input devices such as sensors into connectors and use them for PLC input

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	34	Other	Omron	5 ～ 7	-	98.5 ～ 130.7	Other	-	43.3 ～ 48.35	50

  From: ₹ 2,264.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series

  PATLITE (KASUGA)

  Use a screwdriver to insert crimp terminals (round/Y types) or to remove wiring and wires. Release the wires by pressing the release button (labor-saving design). A compact type terminal with a pitch of just 5 mm (space saving design).
  
  [Features]
  · A clutch lock (screw-less) type with 1-to-1 wiring (screw-less type). Dedicated connection for crimp terminals.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20 ～ 40	DIN rail/Direct attachment	Omron	5	Other	64 ～ 105	-	CE / UL	59	42

  From: ₹ 3,198.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.
  
  [Features]
  · An ultra small size with a pitch between terminals of just 7 mm.
  · Ideal for size reducing PLC or SBC interfaces.
  · A compact type for helping reduce the size of control panels.
  · The connector and terminal block are easy-to-handle 1:1 wire connection types.
  · Uses SS terminal screws for easy wiring.
  · Structured to prevent screws from dropping out and becoming lost.
  · The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
  · Compatible with both DNI rail mounting and direct mounting methods.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	20 ～ 40	DIN rail/Direct attachment	Omron	7	PLC	80 ～ 149	M3	UL / CUL / TUV	40	36 ～ 36.8

  From: ₹ 2,428.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PM-601 Series (Sensor / Actuator Station)

  WAGO

  [Features]
  ● Direct coupling to PLC via straight connection cables.
  ● Even if the PLC changes, the signal and common terminal block placement remain the same.
  ● An ultra small connector terminal block with a horizontal width of 95/77 mm.
  ● A 739 cage clamp terminal block with a pitch of 3.5 mm.
  ● Boasts a wire connection range of 0.08 to 1.5 mm2. Even ultra thin sensor wire can be connected directly.
  ● The signal and common terminal blocks are colored to make them easier to differentiate.
  ● With common power supply terminal blocks, power can be passed horizontally with adjacent connector terminal blocks.
  ● The circuit aligns with the PLC pin layout for products from various manufacturers.
  ● The terminal block features an IP20 finger protection structure.
  ● No stopper required for aluminum DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	16	With DIN rail	Omron	3.5	PLC	95	-	-	41.3	55

  From: ₹ 4,875.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block for Control Panels, PM-32 Series

  WAGO

  [Features]
  ● Proven results. A best selling connector terminal block.
  ● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.
  ● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.
  ● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.
  ● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.
  ● For using fewer parts. No stopper required for aluminum DIN rails

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Omron	3.5	PLC	42	-	-	48.5	85

  From: ₹ 4,515.80
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type

  WAGO

  [Features]
  ● Proven results. A best selling connector terminal block.
  ● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.
  ● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.
  ● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.
  ● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.
  ● For using fewer parts. No stopper required for aluminum DIN rails

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Omron	3.5	PLC	77	-	-	41.3	55

  From: ₹ 4,175.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interface Terminal Block , Standard Type, 8.5mm Pitch

  PATLITE (KASUGA)

  It is possible to wire 2 mm2 cable which is 1 size larger in consideration of voltage drop, etc.
  [Features]
  ・ Standard one-to-one connection interface terminal block
  ・ The terminal pitch 8.5-mm type, which emphasizes workability, allows sufficient clearance between the upper and lower terminal screws, allowing the lower terminal screws to be retightened even after wiring
  ・ It is possible to change the bottom wiring without removing the top wiring
  [Applications]
  ・ Ideal for connecting to PLC

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	40	DIN rail/Direct attachment	Omron	8.5	Other	180	M3.5	CE / TUV	55	51

  From: ₹ 4,332.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block, PCI Series, Crimp Terminal Type

  TOYOGIKEN

  [Features]
  · The PCI series is compatible with the main Mitsubishi and OMRON sequencers (forDC5V to 24V).
  · A slim design with a main body width of just 40 mm. For use with 35 mm wide DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	With DIN rail	Omron	7.62	PLC	162	M3	UL / CUL / TUV	40	36.8

  From: ₹ 3,808.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)

  YOSHIDADENKI

  A space saving 7.62 mm pitch FCN connector type terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Omron	7.62	PLC	101.21	M3	UL / CSA	64	48

  From: ₹ 4,337.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	TOYOGIKEN	OMRON	PATLITE (KASUGA)	TOYOGIKEN	WAGO	WAGO	WAGO	PATLITE (KASUGA)	TOYOGIKEN	YOSHIDADENKI
Product Series	Terminal Block, PCN Series	Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)	Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series	Terminal Block, PCN7 Series	PM-601 Series (Sensor / Actuator Station)	Connector Terminal Block for Control Panels, PM-32 Series	Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type	Interface Terminal Block , Standard Type, 8.5mm Pitch	Connector Terminal Block, PCI Series, Crimp Terminal Type	PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)
CAD	2D		2D	2D				2D
From	₹ 2,878.20	₹ 2,264.00	₹ 3,198.82	₹ 2,428.91	₹ 4,875.96	₹ 4,515.80	₹ 4,175.05	₹ 4,332.64	₹ 3,808.07	₹ 4,337.25
Days to Ship	5 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Connector	MIL Connector / FCN Connector	MIL Connector	MIL Connector	MIL Connector / FCN Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	FCN Connector
Number of Poles(Pole)	20 ～ 40	34	20 ～ 40	20 ～ 40	16	32	32	40	20	40
Mounting Method	DIN rail/Direct attachment	Other	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail	With DIN rail	With DIN rail	DIN rail/Direct attachment	With DIN rail	DIN rail/Direct attachment
Supported equipment manufacturer	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron
Pitch Between Terminals(mm)	7.62	5 ～ 7	5	7	3.5	3.5	3.5	8.5	7.62	7.62
Supported equipment	Other	-	Other	PLC	PLC	PLC	PLC	Other	PLC	PLC
Dimension width(mm)	86 ～ 162	98.5 ～ 130.7	64 ～ 105	80 ～ 149	95	42	77	180	162	101.21
Terminal Block Screw	M3	Other	-	M3	-	-	-	M3.5	M3	M3
Representative Standard	UL / CUL / TUV	-	CE / UL	UL / CUL / TUV	-	-	-	CE / TUV	UL / CUL / TUV	UL / CSA
Dimension vertical(mm)	40	43.3 ～ 48.35	59	40	41.3	48.5	41.3	55	40	64
Dimension depth(mm)	36 ～ 36.8	50	42	36 ～ 36.8	55	85	55	51	36.8	48

Loading...