Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Interface Terminal Blocks (Round/Y Terminal Types)（Connector：MR connector）

The interface terminal block (round / spade terminal type) is a component for wiring connections that combines a connector and a small circuit board terminal block. It is mainly used to connect a PLC, etc., and to reduce the size of the control panel. There are two types of crimp terminals: a basic round type and a Y type that can be removed simply by loosening the screws. The connector types are divided into MIL, FCN, MR, Centronics, etc. Terminal block screws include M3, M3.5, etc. The mounting method can be selected from direct mounting and mounting on a DIN rail. Since the terminal pitch, compatible devices, and representative standards differ depending on the product, it is necessary to select an appropriate interface terminal block (round / spade terminal type) according to the application. There are also support screw type products that can keep the screws loosened, and products that allow you to select a name plate.

Show More Detail Show More Detail

Brand	OMRON (0) PATLITE (KASUGA) (0) TOYOGIKEN (2) WAGO (0) YOSHIDADENKI (0)
CAD	2D 3D
Days to Ship	All Same day 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 12 Day(s) or Less Others

2 items

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

Terminal Block, PCN Series

TOYOGIKEN

[Features]
·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.
· Boasts an even slimmer finish.
· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
· The terminal number and connector number are wired 1-to-1.
· Circuits can be freely designed.
·Workability is further improved by adopting a new screw method.
·If you use a fork type terminal, the PCN series is definitely advantageous.
· A lever type which enables neat and tidy removal from rails.
· No tools required for removal, and so no need for wasted space on the backside of the main body.
· Compatible with both rail mounting and direct mounting.
·Equipped with support screw (dedicated Y-shaped crimp terminal).
·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.
·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

CAD ：: 2D

Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
MR connector	20 ～ 50	DIN rail/Direct attachment	-	7.62	Other	86 ～ 200	M3	TUV	40	36

From: ₹ 3,681.24
Days to Ship: 5 Day(s) or more

5 Day(s) or more

You can add up to 6 items per a category to the compare list. Compare

Terminal Block, PCN7 Series

TOYOGIKEN

An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.

[Features]
· An ultra small size with a pitch between terminals of just 7 mm.
· Ideal for size reducing PLC or SBC interfaces.
· A compact type for helping reduce the size of control panels.
· The connector and terminal block are easy-to-handle 1:1 wire connection types.
· Uses SS terminal screws for easy wiring.
· Structured to prevent screws from dropping out and becoming lost.
· The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
· Compatible with both DNI rail mounting and direct mounting methods.

CAD ：: 2D

Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
MR connector	20 ～ 50	DIN rail/Direct attachment	-	7	I/O board	80 ～ 184	M3	TUV	40	36

From: ₹ 2,761.29
Days to Ship: 5 Day(s) or more

5 Day(s) or more


Brand
Product Series
CAD
From
Days to Ship
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	TOYOGIKEN	TOYOGIKEN
Product Series	Terminal Block, PCN Series	Terminal Block, PCN7 Series
CAD	2D	2D
From	₹ 3,681.24	₹ 2,761.29
Days to Ship	5 Day(s) or more	5 Day(s) or more
Connector	MR connector	MR connector
Number of Poles(Pole)	20 ～ 50	20 ～ 50
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment
Supported equipment manufacturer	-	-
Pitch Between Terminals(mm)	7.62	7
Supported equipment	Other	I/O board
Dimension width(mm)	86 ～ 200	80 ～ 184
Terminal Block Screw	M3	M3
Representative Standard	TUV	TUV
Dimension vertical(mm)	40	40
Dimension depth(mm)	36	36

Configure

Specification/Dimensions

Connector
- MIL Connector
- FCN Connector
- MR connector
- D-sub connector
- MDR connector
- Other
Clear

Number of Poles(Pole)
15

16

20

24

25

26

32

34

36

37

40

50
Clear

Mounting Method
- Direct attachment
- With DIN rail
- DIN rail/Direct attachment
- Other
Clear

Supported equipment manufacturer
- Mitsubishi Electric
- Omron
- Panasonic Electronic Works
- KEYENCE
Clear

Pitch Between Terminals(mm)
3.5

5

5.08

7

7.3

7.62

8.5
Clear

Supported equipment
- PLC
- Servo Motor
- I/O board
- Other
Clear

Dimension width(mm)
31.5

42

46

48

52

55

57

63

64

67.5

70

72.5

74

77

80

81.7

86

95

98.5

100

101.21

102

105

108

109

112.5

128

129

130.7

132

135

139.31

140

149

151.7

160

162

180

184

186.7

200

247.5
Clear

Terminal Block Screw
- M3
- M3.5
- Other
Clear

Representative Standard
- CE
- UL
- CUL
- TUV
- CSA
Clear

Dimension vertical(mm)
22.6

27.1

27.3

31.1

32

33.4

35

36.5

38.1

38.3

40

41.3

41.6

42.8

43.3

43.5

43.8

44.3

48.35

48.5

53

55

59

64
Clear

Dimension depth(mm)
36

36.8

39

42

42.3

43

45

48

50

51

55

60

85

144

151
Clear

Search by Category / Brand

Search by Category

How can we improve?

Interface Terminal Blocks (Round/Y Terminal Types)（Connector：MR connector）

Configure

Specification/Dimensions

Connector

Number of Poles(Pole)

Mounting Method

Supported equipment manufacturer

Pitch Between Terminals(mm)

Supported equipment

Dimension width(mm)

Terminal Block Screw

Representative Standard

Dimension vertical(mm)

Dimension depth(mm)

Related Categories to Interface Terminal Blocks (Round/Y Terminal Types)

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで