Interface Terminal Blocks (Round/Y Terminal Types)

• You can add up to 6 items per a category to the compare list. Compare

  

  Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control

  WAGO

  [Features]
  ● No harness required. Direct coupling with FANUC distribution type I/O (-FN2, -FN)
  ● Increased wiring efficiency. Power can be passed horizontally (-FN2).
  ● A space saving design. Slim horizontal width & common (-FN2).
  ● Ideal for when adding units or making changes. No need to develop a specialized circuit board (-FN2 and -FN).
  ● Simple to use. 1-to-1 circuit

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  Other	-	Direct attachment	-	3.5	-	31.5	-	-	27.3	144

  From: ₹ 9,143.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]
  ·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.
  · Boasts an even slimmer finish.
  · The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
  · The terminal number and connector number are wired 1-to-1.
  · Circuits can be freely designed.
  ·Workability is further improved by adopting a new screw method.
  ·If you use a fork type terminal, the PCN series is definitely advantageous.
  · A lever type which enables neat and tidy removal from rails.
  · No tools required for removal, and so no need for wasted space on the backside of the main body.
  · Compatible with both rail mounting and direct mounting.
  ·Equipped with support screw (dedicated Y-shaped crimp terminal).
  ·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.
  ·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector / MR connector / D-sub connector / MDR connector / Other	20 ～ 50	DIN rail/Direct attachment	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	7.62	Other	86 ～ 200	M3	UL / CUL / TUV	40	36 ～ 43

  From: ₹ 2,878.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wire-to-Wire Connector Terminal Block PS7DW Series

  YOSHIDADENKI

  Convenient for Servo amplifier input/output signals (forced stop input, electromagnetic brake interlock, failure signal, etc.) relaying.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MDR connector	-	DIN rail/Direct attachment	-	-	Other	63	M3	-	36.5	60

  From: ₹ 4,760.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  FANUC Operation Board I/O Connector Terminal Block for FANUC Control

  WAGO

  [Features]
  ● Pins no. 47 to 50 are common. Ideal for FANUC operations board I/O.
  ● Increased wiring efficiency. Power supply horizontal pass is possible
  ● Space saving. 50 pole 3.5 mm terminal block.
  ● A size that allows for it to be inserted even into tight spaces. Designed so as not to be too tall.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	50	Direct attachment	-	3.5	-	95	-	-	41.6	55

  From: ₹ 6,410.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

  OMRON

  Connector terminal block conversion units designed specifically to connect PLCs.
  [Features]
  ・ The wiring pattern specialized for PLC connection has reduced the trouble of checking the signal layout
  ・ The name paper of the terminal block will be the PLC address
  ・ Connection method is cross-head screw type, straight-slot screw type, push-in type
  ・ Available with and without power supply terminal
  ・ The operability of the push-in terminal has been improved, making it even easier to use
  ・ Connection work has become smoother with a terminal arrangement that takes workability into consideration
  ・ It can be mounted with DIN rail and screws
  ・ With a common design, it can be customized
  ・ The ribs for screw mounting are designed to dive into the DIN rail so that they do not interfere with DIN rail mounting parts or end plates
  ・ Of course, even if XW2Rs are connected to each other, they will be placed without any interference
  [Applications]
  ・ Convert various input devices such as sensors into connectors and use them for PLC input

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	34 ～ 40	Other	Mitsubishi Electric / Omron / KEYENCE	5 ～ 7	-	98.5 ～ 151.7	Other	-	43.3 ～ 48.35	50

  From: ₹ 1,811.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit (Slim Type) XW2D

  OMRON

  [Features]
  · A slim type connector terminal block conversion unit.
  · The surface area required for mounting has been reduced by 35% (compared to the manufacturer's XW2B 40 pole type), helping achieve even smaller control panels and automatic type equipment.
  · The terminal screws have a structure which prevents them from falling off.
  · The crimp terminals can be used with both round and Y terminal types.
  · Compatible with both DIN rail and screw mounting.
  · Can be mounted and removed to and from DIN rails, helping keep an open state.
  · Uses unique DIN rail lock mechanism.
  · Terminal covers can be fixed in an open state.
  · Every fifth screw terminal features a different colored screw, making it easy to count the number of terminals.

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	34 ～ 40	Other	-	7	-	128 ～ 149	M3	-	40	39

  From: ₹ 2,382.00
  Days to Ship: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series

  PATLITE (KASUGA)

  Use a screwdriver to insert crimp terminals (round/Y types) or to remove wiring and wires. Release the wires by pressing the release button (labor-saving design). A compact type terminal with a pitch of just 5 mm (space saving design).
  
  [Features]
  · A clutch lock (screw-less) type with 1-to-1 wiring (screw-less type). Dedicated connection for crimp terminals.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / Other	20 ～ 40	DIN rail/Direct attachment	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	5	Other	55 ～ 105	-	CE / UL	59	42

  From: ₹ 3,070.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels

  WAGO

  A module that converts an FCN connector into a terminal block.
  [Features]
  ·Converts the half-pitch MDR connector used as standard in servo amplifiers to a terminal block.
  ·Simple one-to-one circuit. Wide cable connection range from 0.08 to 1.5 or 2.5 mm2.
  ·Connector is MIL, FCN (AMP)··Industry standard.
  ·3.5 mm pitch and 5 mm pitch terminal blocks··Wide lineup.
  ·KEYENCE PLC CPU "-KV" is also available··Lineup added.
  ·Features a cage clamp connection that is strong against vibration··Improved reliability.
  [Applications]
  ·Ideal for when soldering work is difficult and troublesome for connecting the FCN connector and electric cable.
  ·Ideal for prototyping and experimental applications when you want to convert the input/output signals of KEYENCE PLC to a terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	20 ～ 50	With DIN rail	KEYENCE	3.5 ～ 5	PLC	52 ～ 132	-	-	22.6 ～ 38.3	55

  From: ₹ 2,990.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.
  
  [Features]
  · An ultra small size with a pitch between terminals of just 7 mm.
  · Ideal for size reducing PLC or SBC interfaces.
  · A compact type for helping reduce the size of control panels.
  · The connector and terminal block are easy-to-handle 1:1 wire connection types.
  · Uses SS terminal screws for easy wiring.
  · Structured to prevent screws from dropping out and becoming lost.
  · The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
  · Compatible with both DNI rail mounting and direct mounting methods.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector / MR connector / D-sub connector / Other	20 ～ 50	DIN rail/Direct attachment	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	7	PLC / I/O board	80 ～ 184	M3	UL / CUL / TUV	40	36 ～ 36.8

  From: ₹ 2,428.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control (Connected Terminal Block)

  WAGO

  [Features]
  ● Simple connection. Push-in type wire connection.
  ● No harness required. Direct coupling with FANUC distribution type I/O.
  ● Increased wiring efficiency. Power supply horizontal pass is possible
  ● Space saving. Slim horizontal width & common
  ● Shorter on-site wire connection work. Quick connect terminal block
  ● Ideal for when adding units or making changes. No need to develop a specialized circuit board.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  Other	-	Direct attachment	-	5	-	31.5	-	-	32	151

  From: ₹ 6,803.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PM-601 Series (Sensor / Actuator Station)

  WAGO

  [Features]
  ● Direct coupling to PLC via straight connection cables.
  ● Even if the PLC changes, the signal and common terminal block placement remain the same.
  ● An ultra small connector terminal block with a horizontal width of 95/77 mm.
  ● A 739 cage clamp terminal block with a pitch of 3.5 mm.
  ● Boasts a wire connection range of 0.08 to 1.5 mm2. Even ultra thin sensor wire can be connected directly.
  ● The signal and common terminal blocks are colored to make them easier to differentiate.
  ● With common power supply terminal blocks, power can be passed horizontally with adjacent connector terminal blocks.
  ● The circuit aligns with the PLC pin layout for products from various manufacturers.
  ● The terminal block features an IP20 finger protection structure.
  ● No stopper required for aluminum DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	16	With DIN rail	Mitsubishi Electric / Omron / KEYENCE	3.5	PLC	95	-	-	41.3	55

  From: ₹ 4,875.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block for Control Panels, PM-32 Series

  WAGO

  [Features]
  ● Proven results. A best selling connector terminal block.
  ● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.
  ● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.
  ● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.
  ● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.
  ● For using fewer parts. No stopper required for aluminum DIN rails

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Mitsubishi Electric / Omron / KEYENCE	3.5	PLC	42	-	-	48.5	85

  From: ₹ 4,435.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type

  WAGO

  [Features]
  ● Proven results. A best selling connector terminal block.
  ● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.
  ● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.
  ● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.
  ● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.
  ● For using fewer parts. No stopper required for aluminum DIN rails

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Mitsubishi Electric / Omron / KEYENCE	3.5	PLC	77	-	-	41.3	55

  From: ₹ 4,174.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch

  PATLITE (KASUGA)

  A 7-mm pitch interface terminal block that uses a full-cover structure that does not expose the circuit board, and is designed with safety in mind.
  [Features]
  ・ The cover is openable and can be fixed at any position
  ・ Compared to the conventional TIFA7 Series, it is a series that reduces the installation space by approx. 12% pursuing further space saving
  ・ Standard-product connector is Hirose Electric MIL connector (Ribbon cable connector)
  ・ OMRON MIL connector and Fujitsu F360 series connector (input/output connector for circuit board) can also be mounted
  [Applications]
  ・ Ideal for PLC (programmable controller) and computer interface

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / Other	20 ～ 34	DIN rail/Direct attachment	KEYENCE	7	PLC	80 ～ 129	M3	CE / UL / CUL	40	42.3

  From: ₹ 2,345.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit Terminal Block with Common (three-stage type for input) XW2E

  OMRON

  A common terminal block with a power supply terminal, and a 3-stage terminal block type for easy wiring.
  [Features]
  ・ Dedicated for PLC 16-point input
  ・ By adopting a 3-stage terminal block, 1 crimp terminal can be connected to the power supply terminal block, making wiring work easy
  [Applications]
  ・ Used when saving wiring in the control panel

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	Other	-	7.3	-	149	M3.5	-	53	50

  From: ₹ 2,436.00
  Days to Ship: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit (Standard Type) XW2B (Standard Type)

  OMRON

  [Features]
  · Makes the conversion of connectors and terminal blocks easy. Helps reduce the amount of wiring required on control panels.
  · Compatible with both DIN rail mounting and screw mounting.
  · The connector side standardizes MIL flat cable connectors and multi-pin square connectors.
  · Terminal blocks using M3 screws and M3.5 screws are available.
  · Dedicated manufacturer programmable controller.
  · Connector connection cable also available (sold separately).

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / Other	20 ～ 50	Other	-	5.08 ～ 8.5	-	67.5 ～ 247.5	M3 / M3.5	-	38.1 ～ 43.8	45

  From: ₹ 1,670.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IM-MDR Half Pitch MDR Connector Terminal Block for Control Panels

  WAGO

  [Features]
  ● Simple to use. 1-to-1 circuit
  ● An ultra small type. A 3.5 mm pitch terminal block.
  ● Industry standard. An MDR connector used as standard in servo amplifiers.
  ● Ideal for shield processing and EMC audits, etc. Equipped with a shield terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MDR connector	20 ～ 50	With DIN rail	-	3.5	-	46 ～ 100	-	-	31.1	55

  From: ₹ 3,413.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IM-DSF Dsub Female Connector Terminal Block for Control Panels

  WAGO

  [Features]
  ● Simple to use. 1-to-1 circuit
  ● A wide range of wire connections. A 5 mm pitch terminal block.
  ● Industry standard. An international standard Dsub connector.
  ● For large current applications. Convenient for 3 A energizing
  ● Ideal for EMC audits, etc. Equipped with a shield terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  D-sub connector	15 ～ 37	With DIN rail	-	5	-	48 ～ 102	-	-	27.1	55

  From: ₹ 4,449.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interface Terminal Block , Standard Type, 8.5mm Pitch

  PATLITE (KASUGA)

  It is possible to wire 2 mm2 cable which is 1 size larger in consideration of voltage drop, etc.
  [Features]
  ・ Standard one-to-one connection interface terminal block
  ・ The terminal pitch 8.5-mm type, which emphasizes workability, allows sufficient clearance between the upper and lower terminal screws, allowing the lower terminal screws to be retightened even after wiring
  ・ It is possible to change the bottom wiring without removing the top wiring
  [Applications]
  ・ Ideal for connecting to PLC

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	40	DIN rail/Direct attachment	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	8.5	Other	180	M3.5	CE / TUV	55	51

  From: ₹ 4,332.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block, PCI Series, Crimp Terminal Type

  TOYOGIKEN

  [Features]
  · The PCI series is compatible with the main Mitsubishi and OMRON sequencers (forDC5V to 24V).
  · A slim design with a main body width of just 40 mm. For use with 35 mm wide DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	With DIN rail	Mitsubishi Electric / Omron	7.62	PLC	162	M3	UL / CUL / TUV	40	36.8

  From: ₹ 3,808.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PX7DW Series (terminal pitch: 7.62mm)

  YOSHIDADENKI

  Self-up type screw MIL connector type terminal block

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	34 ～ 50	DIN rail/Direct attachment	-	7.62	PLC / Servo Motor	101.21 ～ 139.31	M3	UL / CSA	64	48

  From: ₹ 3,915.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)

  YOSHIDADENKI

  A space saving 7.62 mm pitch FCN connector type terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric / Omron	7.62	PLC	101.21	M3	UL / CSA	64	48

  From: ₹ 4,337.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit XW2R (for general purpose use)

  OMRON

  [Features]
  · A general purpose type connector terminal block conversion unit that can be used for saving on the amount of wiring required in a variety of measures.

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	20 ～ 50	Other	-	5 ～ 7	-	81.7 ～ 186.7	Other	-	33.4 ～ 48.35	50

  From: ₹ 1,615.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit Terminal Block with Common (two stage type for input/output) XW2C-20G6-IO16

  OMRON

  [Features]
  · Includes common terminals. Replacing the included shorting bar allows for use with both PLC input and output units.

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	Other	-	7	-	149	M3	-	40	39

  From: ₹ 2,240.00
  Days to Ship: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit (Common Type) XW2C-20G5-IN16

  OMRON

  Equipped with a power supply common terminal and operation display LED, it realizes wiring saving in the control panel with the input device.
  [Features]
  ・ Equipped with a common power supply terminal for input devices
  ・ With LED that shows ON/OFF of input signal at a glance
  ・ For both DIN rail mounting and screw mounting types
  ・ Prepare a dedicated connection cable (Sold separately)
  [Applications]
  ・ Used for wiring saving in the control panel

  • Volume Discount

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	Other	-	8.5	-	160	M3.5	-	35	50

  From: ₹ 2,957.00
  Days to Ship: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit XW2B

  OMRON

  Connector Terminal Block Conversion Unit XW2B

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20 ～ 40	Other	-	7.62	Servo Motor / Other	135 ～ 180	M3	-	42.8 ～ 44.3	45

  From: ₹ 7,463.52
  Days to Ship: 5 Day(s)

  5 Day(s)

Brand
Product Series
CAD
From
Days to Ship
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	WAGO	TOYOGIKEN	YOSHIDADENKI	WAGO	OMRON	OMRON	PATLITE (KASUGA)	WAGO	TOYOGIKEN	WAGO	WAGO	WAGO	WAGO	PATLITE (KASUGA)	OMRON	OMRON	WAGO	WAGO	PATLITE (KASUGA)	TOYOGIKEN	YOSHIDADENKI	YOSHIDADENKI	OMRON	OMRON	OMRON	OMRON
Product Series	Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control	Terminal Block, PCN Series	Wire-to-Wire Connector Terminal Block PS7DW Series	FANUC Operation Board I/O Connector Terminal Block for FANUC Control	Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)	Connector Terminal Block Conversion Unit (Slim Type) XW2D	Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series	IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels	Terminal Block, PCN7 Series	Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control (Connected Terminal Block)	PM-601 Series (Sensor / Actuator Station)	Connector Terminal Block for Control Panels, PM-32 Series	Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type	Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch	Connector Terminal Block Conversion Unit Terminal Block with Common (three-stage type for input) XW2E	Connector Terminal Block Conversion Unit (Standard Type) XW2B (Standard Type)	IM-MDR Half Pitch MDR Connector Terminal Block for Control Panels	IM-DSF Dsub Female Connector Terminal Block for Control Panels	Interface Terminal Block , Standard Type, 8.5mm Pitch	Connector Terminal Block, PCI Series, Crimp Terminal Type	PX7DW Series (terminal pitch: 7.62mm)	PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)	Connector Terminal Block Conversion Unit XW2R (for general purpose use)	Connector Terminal Block Conversion Unit Terminal Block with Common (two stage type for input/output) XW2C-20G6-IO16	Connector Terminal Block Conversion Unit (Common Type) XW2C-20G5-IN16	Connector Terminal Block Conversion Unit XW2B
CAD		2D					2D		2D					2D					2D
From	₹ 9,143.16	₹ 2,878.20	₹ 4,760.05	₹ 6,410.40	₹ 1,811.00	₹ 2,382.00	₹ 3,070.27	₹ 2,990.67	₹ 2,428.91	₹ 6,803.67	₹ 4,875.96	₹ 4,435.95	₹ 4,174.58	₹ 2,345.87	₹ 2,436.00	₹ 1,670.00	₹ 3,413.38	₹ 4,449.49	₹ 4,332.64	₹ 3,808.07	₹ 3,915.51	₹ 4,337.25	₹ 1,615.00	₹ 2,240.00	₹ 2,957.00	₹ 7,463.52
Days to Ship	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	Same day	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	Same day or more	Same day	Same day	5 Day(s)
Connector	Other	MIL Connector / FCN Connector / MR connector / D-sub connector / MDR connector / Other	MDR connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector / Other	MIL Connector / FCN Connector	MIL Connector / FCN Connector / MR connector / D-sub connector / Other	Other	MIL Connector	MIL Connector	MIL Connector	MIL Connector / Other	MIL Connector	MIL Connector / Other	MDR connector	D-sub connector	MIL Connector	MIL Connector	MIL Connector	FCN Connector	MIL Connector / FCN Connector	MIL Connector	MIL Connector	MIL Connector
Number of Poles(Pole)	-	20 ～ 50	-	50	34 ～ 40	34 ～ 40	20 ～ 40	20 ～ 50	20 ～ 50	-	16	32	32	20 ～ 34	20	20 ～ 50	20 ～ 50	15 ～ 37	40	20	34 ～ 50	40	20 ～ 50	20	20	20 ～ 40
Mounting Method	Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	Direct attachment	Other	Other	DIN rail/Direct attachment	With DIN rail	DIN rail/Direct attachment	Direct attachment	With DIN rail	With DIN rail	With DIN rail	DIN rail/Direct attachment	Other	Other	With DIN rail	With DIN rail	DIN rail/Direct attachment	With DIN rail	DIN rail/Direct attachment	DIN rail/Direct attachment	Other	Other	Other	Other
Supported equipment manufacturer	-	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	-	-	Mitsubishi Electric / Omron / KEYENCE	-	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	KEYENCE	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	-	Mitsubishi Electric / Omron / KEYENCE	Mitsubishi Electric / Omron / KEYENCE	Mitsubishi Electric / Omron / KEYENCE	KEYENCE	-	-	-	-	Mitsubishi Electric / Omron / Panasonic Electronic Works / KEYENCE	Mitsubishi Electric / Omron	-	Mitsubishi Electric / Omron	-	-	-	-
Pitch Between Terminals(mm)	3.5	7.62	-	3.5	5 ～ 7	7	5	3.5 ～ 5	7	5	3.5	3.5	3.5	7	7.3	5.08 ～ 8.5	3.5	5	8.5	7.62	7.62	7.62	5 ～ 7	7	8.5	7.62
Supported equipment	-	Other	Other	-	-	-	Other	PLC	PLC / I/O board	-	PLC	PLC	PLC	PLC	-	-	-	-	Other	PLC	PLC / Servo Motor	PLC	-	-	-	Servo Motor / Other
Dimension width(mm)	31.5	86 ～ 200	63	95	98.5 ～ 151.7	128 ～ 149	55 ～ 105	52 ～ 132	80 ～ 184	31.5	95	42	77	80 ～ 129	149	67.5 ～ 247.5	46 ～ 100	48 ～ 102	180	162	101.21 ～ 139.31	101.21	81.7 ～ 186.7	149	160	135 ～ 180
Terminal Block Screw	-	M3	M3	-	Other	M3	-	-	M3	-	-	-	-	M3	M3.5	M3 / M3.5	-	-	M3.5	M3	M3	M3	Other	M3	M3.5	M3
Representative Standard	-	UL / CUL / TUV	-	-	-	-	CE / UL	-	UL / CUL / TUV	-	-	-	-	CE / UL / CUL	-	-	-	-	CE / TUV	UL / CUL / TUV	UL / CSA	UL / CSA	-	-	-	-
Dimension vertical(mm)	27.3	40	36.5	41.6	43.3 ～ 48.35	40	59	22.6 ～ 38.3	40	32	41.3	48.5	41.3	40	53	38.1 ～ 43.8	31.1	27.1	55	40	64	64	33.4 ～ 48.35	40	35	42.8 ～ 44.3
Dimension depth(mm)	144	36 ～ 43	60	55	50	39	42	55	36 ～ 36.8	151	55	85	55	42.3	50	45	55	55	51	36.8	48	48	50	39	50	45

Loading...