• You can add up to 6 items per a category to the compare list. Compare

  

  Adjustable Fixed Bar for Lightweight Partitions, KGP Series

  MIRAI INDUSTRY

  [Features]
  - Simple installation with single-sided mounting.
  - Use to mount a box to a lightweight partition wall.
  - No need to purchase accessories for different stud sizes or types; this is all you need to mount a box.
  - Convenient for locations with narrow stud spacing (can be used even when cut down).
  - Use the included double-sided tape for temporary fastening is possible; mounting to lightweight studs is also simple.
  - The manufacturer's slide box includes holes for mounting, so it can be easily mounted to the center (vertical) position of an adjustable fixed bar (exclusions apply).
  - The KGP-230 (total length 230 mm) can be mounted to any location, provided the studs are installed at an interval of 450 mm.
  - The slide box (thickness 36mm) will fit right in if you align the box with the stud end before mounting.

  Type
  Bar

  From: ₹ 272.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Free Brace For Lightweight Partition Walls

  MIRAI INDUSTRY

  [Features]
  · Used for mounting boxes to lightweight partition walls.
  · No need to buy accessories for each type and size of wall studs. This product alone can be used for mounting the box. (Refer to the compatibility table below.)
  · Shaped so that it does not touch against the section which wraps around the opening side on the wall stud, even allowing the mounting of slide boxes with a depth of 36 mm to the opening side of 40‑mm wall studs.
  · Can be held temporarily with the double-sided tape provided, making mounting to wall studs easy.

  Type
  Bar

  From: ₹ 376.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Adjustment Fixing Bar For Lightweight Partitions (With Sliding Metal Fittings)

  MIRAI INDUSTRY

  [Features]
  · Used for mounting boxes to lightweight partition walls.
  · No need to buy accessories for each type and size of wall studs. This product alone can be used for mounting the box.
  · Includes slide metal fittings to make box positioning work or adjusting the position of the box after work has been carried out easy. (Temporarily fasten the box with clamps and then fix with 1 tapping screw.)
  *Slide metal fittings can also be ordered individually.
  · Mounts on one side, making it convenient for mounting boxes in locations where the wall stud space is tight, etc. (Can also be cut to use.)
  · Can be held temporarily with the double-sided tape provided, making mounting to wall studs easy.
  · With length-adjustment function. KGP-130EZ units can be connected together to extend. The KGP-188EZ bar can be shortened by breaking it off at the notches using a pair of combination pliers.

  Type
  Bar

  From: ₹ 106.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New Stat Bar (Anti-Tilt Bar)

  MIRAI INDUSTRY

  [Features]
  ・ You can also attach the connector to the knock on the back of the box.
  ・ The anti-tilt bar has ø4 mm and ø3 mm type that is easy to bend. (With knock, excluding adhesive type)
  ・ The adhesive type (with adhesive) is a type that melts the adhesive with a torch lamp and attaches it to the box.
  ・ Knock type (without W3/8 stat) can be installed even on a box with a heat insulating cover or a box with a heat insulating sheet attached. (Knock on the back cannot be used.)

  Type
  Bar

  From: ₹ 266.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stat Bar for Deck Plate

  MIRAI INDUSTRY

  [Features]
  ・ It is used for mounting and fixing the box to the deck plate.
  ・ The bar is a 6 mm steel wire that can be bent freely, so the height of the box can be adjusted freely.
  ・ You can prevent the box from tilting and fix it by using the wall reinforcement.
  ・ A connector can also be attached to the knock on the back of the box.

  • Volume Discount

  Type
  Bar

  From: ₹ 530.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-mm Bar (Tilt Prevention Bar)

  MIRAI INDUSTRY

  [Features]
  · Convenient bar (4-mm steel wire) for preventing the tilting of plastic boxes (recessed square outlet boxes, recessed switch boxes) manufactured by Mirai Industry.
  · Use the reinforcing sections in slabs or in walls to make box mounting easy and prevent titling. (Boxes can be fixed directly.)
  · Uses freely bendable 4-mm steel wire so the height of the box can be freely adjusted to match the wall thickness.
  · Models with a rotation stopper just need to be plugged into boxes. Easy to fix to boxes.

  • Volume Discount

  Type
  Bar

  From: ₹ 120.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MIRAI INDUSTRY	MIRAI INDUSTRY	MIRAI INDUSTRY	MIRAI INDUSTRY	MIRAI INDUSTRY	MIRAI INDUSTRY
Product Series	Adjustable Fixed Bar for Lightweight Partitions, KGP Series	Free Brace For Lightweight Partition Walls	Adjustment Fixing Bar For Lightweight Partitions (With Sliding Metal Fittings)	New Stat Bar (Anti-Tilt Bar)	Stat Bar for Deck Plate	4-mm Bar (Tilt Prevention Bar)
From	₹ 272.25	₹ 376.64	₹ 106.00	₹ 266.98	₹ 530.00	₹ 120.00
Days to Ship	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Type	Bar	Bar	Bar	Bar	Bar	Bar

Loading...