• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.


  • A flat part of about 0.1 to 0.2 mm remains on the tip due to the manufacturing process.


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipTool Diameter (D)
6 Day(s) or more 3
6 Day(s) or more 4
6 Day(s) or more 5
6 Day(s) or more 6
6 Day(s) or more 8
6 Day(s) or more 10
6 Day(s) or more 12
6 Day(s) or more 16
6 Day(s) or more 20


  1. 1

Basic Information

Application Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling Tip angle (θ) 90 work material general steel / Cast Iron / Aluminum
Single blade, two blades Single blade Tool Material Type Carbide Coating Y/N Available
Coating Type TiAlN

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)