• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

Spiral Tap T Series For General Soft Steel, TSP

Spiral Tap T Series For General Soft Steel, TSP

[Features]
· The torsion angle of the flute is 43.5° giving a good cutting chip discharging capability. The thrust force is adjusted with a special relief provided on the full thread part that follows the engagement section, preventing female threads from expanding.
· The tap is made using abrasion-resistant high vanadium, high speed steel.

Part Number

Configured Part Number is shown.

TSP-M8X1.25-GT7

Part Number
TSP-M8X1.25-GT7
Part NumberVolume DiscountDays to Ship
9 Day(s) or more

Loading...

  1. 1

Basic Information

Thread Types Meter Nominal M8 Pitch, Number of Threads(mm) 1.25
Tool Material Type Vanadium High-Speed Steel Work Material Low-Carbon Steel (C Content of 0.25% or Less) Tap Model Spiral Tap
L(mm) 70 Blade Length(mm) 12 Link Diameter(φ) 6.2
Precision GT7

Please check the type/dimensions/specifications of the part TSP-M8X1.25-GT7 in the Spiral Tap T Series For General Soft Steel, TSP series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)