Short Swivel Ratchet Handle (Hold Type) RH3VHS
Caution
Product Description
[Features]
· Repair kit for RH3VHW.
· For 72 teeth, two segment cams have achieved a number of teeth equivalent to 144.
· The head part has a lock mechanism that allows the angle to be freely adjusted by 180°.
· Equipped with a socket hold mechanism that makes it easy to attach and detach the socket and does not easily come off during work.
· The socket can be replaced with one push operation.
Product features and specifications
Basic specifications and features of the product
The grip is aluminum and is light, and it has good workability due to the short type.
Socket hold mechanism
* Be sure to hold down the push button when attaching or detaching.
Rotation direction switching dial
The angle of the head can be adjusted 180° freely.
With a lock mechanism that can fix the head angle with easy operation.
Excellent workability with an easy-to-grip handle shape and weight reduced.
With bolster, you can work with a 12 mm wrench
Achieves low profile, lightweight, and compactness by eliminating waste to the utmost limit. A gear with 72 teeth is built into the head to achieve a feed angle of 5°. By adopting a new mechanism (wedge type) in which the gear and cam mesh in 8 steps while increasing the number of teeth, both reliable work and efficient operability are achieved. A new click sound that echoes in small steps and lightly will immerse you in your work.
Discerning grip design
The unified design of the logo of Tone in the center is a rational design that not only expresses the brand's identity but also functions as a anti-slip.The grip is an I-shaped cross-section grip that has been stripped of excess material for weight reduction of the product while ensuring the strength required when force is applied in the direction of rotation.
Beautiful glossy satin finish.
- Compatible models RH3VHW, RH3VHS
RH3VHS parts development drawing
RK-RH3VH parts list
| No. | Part name | Number |
|---|---|---|
| 1 | Drive assembly | 1 |
| 2 | Retaining ring | 1 |
* This product is not sold by parts.
Standard table
| Part number | Square drive dr. (mm) | Dimensions (mm) | Weight (g) | |||
|---|---|---|---|---|---|---|
| D | H | T | L | |||
| RH3VHS | 9.5 | 33.4 | 31.6 | 24 | 170 | 215 |
Drawing
Selection support information
How to read the part number display
| A product name | B square socket | C features | D length | ||||
|---|---|---|---|---|---|---|---|
| RH | Ratchet Handle | 2 | 6.35 | F | Swing | S | Short |
| NS | Spinner Handle | 3 | 9.5 | C | Compact | L | Long |
| — | — | 4 | 12.7 | H | Hold type | X | Extra long |
Cautions/prohibitions
- Please only use this tool for its intended purpose.
- Use the one that match the size of the bolts/nuts.
- Insert the socket until the nut is completely covered. (Fig. 1)
- Sockets and attachments are manual tools. Do not use for power tools such as impact wrenches. (Fig. 2)
- Operate the ratchet handle slowly and carefully.
- Be sure to completely switch between left and right. If incomplete meshing between teeth occurs, it damages to nails and teeth, causes dangerous idling and slipping. (Fig. 3)
- If dust adheres to the inside of the ratchet handle, the meshing will be poor. Inspect the product on a regular basis.
- Do not add a pipe to the handle. It is very dangerous because it is damaged by overload. (Fig. 4)
- Do not apply impact by hitting with a hammer, etc. (Figure 5)
- Do not use in place of a hammer.
- Insert the square socket (convex insertion angle) completely to the root. (Figure 6)
- The socket holder mechanism may not be able to hold the sockets if the ball-securing groove of the concave part of square drive is of a different specification.
- The holding mechanism might disengage if it receives a shock.
- Joints are composed of convex drive, concave drive and parts between them, and they have low torque transmission efficiency and are vulnerable to impact torque, so please do not use them roughly. Both JIS and ISO standards are approx. half as strong as the ratchet handle. (Figure 7)
